Zipping Towards Stem: Simulation Wind Tunnel, Emma Pierson, Greg Flohr, Devon Goldberg, Brandon Hein, Jeremy Hein

Williams Honors College, Honors Research Projects

The simulation wind tunnel was created to be integrated into a larger project funded by the National Science Foundation titled Zipping Towards STEM: Integrating Engineering Design into the Middle School Physical Science Curriculum. The goal of this project is to integrate the engineering design process of computer modeling, simulation, rapid prototyping, and testing into the 8^th grade level curriculum by letting students design and test their own mini soap box derby cars. The simulation wind tunnel will be used to help the students understand the basics of aerodynamics so they can design an aerodynamic mini soap box derby …

Aircraft Thermal Management Using Liquefied Natural Gas, Sean Robert Nuzum

Browse all Theses and Dissertations

Many technological advances are expected to increase the capabilities of the future aircraft, both civilian and military. These improvements come in many forms such as new wing or fuselage shapes to improve lift or decrease drag. Other improvements are internal. One of these areas is the inclusion of advanced electronic systems for various roles. These changes affect a wide range of aircraft systems including, but not limited to avionics, power generation and thermal management. While these modifications promise to increase aircraft capabilities such as its range, payload or other key performance parameters, there are some significant drawbacks. One drawback is …

Hybrid Particle Image Velocimetry With The Combination Of Cross-Correlation And Optical Flow Method, Mark Bradley Johnson

Browse all Theses and Dissertations

Particle Image Velocimetry (PIV) has been of relevant discussions lately as the equipment used to obtain temporally and spatially resolved flow fields have advanced rapidly. Despite these advancements, the accuracy of evaluating these images have yet to exceed expectations. Current techniques typically utilize one method, either correlation based (frequently) or optical flow (non-frequently), and both are vulnerable to specific conditions incorporated in the PIV images. Only through the combination of two methods, cross correlation and optical flow, can a technique benefit from the strengths of each method while concealing the flaws each individual method contains. The Hybrid Particle Image Velocimetry …

Economical Retrofit System To Reduce Cooking Emissions In Third World Dwellings, Jonathan Vanzummeren, Tyler Sturgeon, Ben Dalessandro

Williams Honors College, Honors Research Projects

Abstract:

The purpose of this document is to propose and demonstrate the feasibility and effectiveness of substituting an open flame biomass cooking process with a closed system with the capabilities of sustaining an adequate fire. Clay ovens or “chulhas” are the traditional piece of cooking equipment used in poorer areas of the world. They are often built inside cramped one-room housing units with little or no ventilation. The emissions released from burning fuel sources such as wood, coal, or animal waste bring with them detrimental and often fatal health problems and results in approximately 1.3 million deaths per year.

The …

Optimization Of Formula Sae Electric Vehicle Frame With Finite Element Analysis, Alexander Prorok

Williams Honors College, Honors Research Projects

Optimization of Formula SAE Electric Vehicle Frame with Finite Element Analysis

Nfpa 2015/2016 Chainless Challenge, Andrew Tupta, Stefan Stamboldziev, Sean Catchpole, Jordon Spence, Andrew Ball

Williams Honors College, Honors Research Projects

Parker Hannifin has issued a challenge to student design teams of creating a Chainless bike using a hydraulic system. Each student design team will be assigned a technical advisor from the University. The project will be divided into two phases after the initial kickoff. The first phase will align with senior design course for motion control and hydraulics and will yield the student obtaining knowledge in hydraulics, including bio-degradable fluids, pneumatics, electromechanical systems, green technologies (sustainable energy) and controlling force and motion. Students will be provided data sheets, a list of in-stock Parker components and by the end of the …

Fatigue Performance Of Glass Fiber/Epoxy Composite At Low Temperature, Prajakta Govande 2817401530, Dominic R. Cross, Kwek Tze Tan

Williams Honors College, Honors Research Projects

Due to technological advancement in the manufacturing methods of composites, these materials find a plethora of applications which include but are not limited to wind energy projects in the form of turbine blades. These blades at times are exposed to temperatures as low as -40ᵒC. Therefore, there is a need to study low-temperature effects on such materials under different loading scenarios. This study investigates the possibility of utilizing MAC/GMC as a simulation tool to match trends of mechanical properties such as fatigue performance and stiffness variation of a given Glass fiber/Epoxy composite at 23ᵒC (room temperature) and -40 ᵒC, under …

Designing A Nano-Drone With Hybrid Structural Energy Storage, Ann Klindworth, Jared Cornett, Kyle Leifheit, Joseph Dejacimo

Williams Honors College, Honors Research Projects

The Advanced Energy and Sensor Lab at the University of Akron has been working to develop a working flow battery that replaces today’s solid batteries. The objective of this senior design project was to replace the conventional lithium-ion battery as the energy storage component in nano-copters with a newly designed hybrid structural battery. In the design, the nano-copter needed to be mechanically supported and store enough energy for flying. In order to accomplish this, the nano-copter weight was reduced so that the flight range could be significantly increased. Therefore, the project was broken into two major parts. The first was …

An Adapted Approach To Process Mapping Across Alloy Systems And Additive Manufacturing Processes, Luke Charles Sheridan

Browse all Theses and Dissertations

The continually growing market for metal components fabricated using additive manufacturing (AM) processes has called for a greater understanding of the effects of process variables on the melt pool geometry and microstructure in manufactured components for various alloy systems. Process Mapping is a general approach that traces the influence of process parameters to thermal behavior and feature development during AM processing. Previous work has focused mainly on Ti-6Al-4V (Ti64), but this work uses novel mathematical derivations and adapted process mapping methodologies to construct new geometric, thermal, and microstructural process maps for Ti64 and two nickel superalloy material systems. This work …

Torque Accuracy Improvement Via Explicit Torque Feedback Control For Internal Combustion Spark Ignition Engines, Anwar Alkeilani

Wayne State University Dissertations

At the present time, both control and estimation accuracies of engine torque are causes for under-achieving optimal drivability and performance in today’s production vehicles. The major focus in this area has been to enhance torque estimation and control accuracies using existing open-loop torque control and estimation structures. Such an approach does not guarantee optimum torque tracking accuracy and optimum estimation accuracy due to air flow and efficiencies estimations errors. Furthermore, current approach overlooks the fast torque path tracking which does not have any related feedback. Recently, explicit torque feedback control has been proposed in the literature using either estimated or …

Electrocatalysis In Li-S Batteries, Hesham I. Al Salem

Wayne State University Dissertations

Stabilizing polysulfide-shuttle process while ensuring high sulfur loading holds the key to realize high theoretical energy density (2500 Wh/kg) of lithium-sulfur (Li-S) batteries. Though several carbon based porous materials have been used as host structures for sulfur and its intermediate polysulfides, the week adsorption of polysulfides on carbon surface and its poor reaction kinetics limits them from practical application. Here, we preset a novel ‘electcatalysis’ approach to stabilize polysulfide shuttle process and also enhance its red-ox kinetics. As a proof of concept, we have studied in-detail using conventional electrocatalyst i.e Pt/graphene composite, further the same extended to cost-effective electrocatalysts such …

Combustion, Ionization And Sporadic Pre-Ignition In A Turbocharged Gasoline Direct Injection Engine., Shenouda Mekhael

Wayne State University Dissertations

This research is focused on the use of ionization of combustion products in hydrocarbons-air flames to gain a better understanding of the combustion process in turbocharged gasoline direct injection engines. A GM 2.0 L Ecotec GDI-T engine is used in this investigation. The ion current is measured simultaneously by two in-cylinder combustion sensors: the spark plug and the fuel injector. The characteristics of the ion current signals produced by the two sensors are analyzed and correlated with the characteristics of the rate of heat release computed from the cylinder gas pressure. Since this is the first time for the fuel …

Static And Dynamic Behavior Of Carbon Fiber Reinforced Aluminum (Carall) Laminates, Gurpinder Singh Dhaliwal

Wayne State University Dissertations

STATIC AND DYNAMIC BEHAVIOUR OF CARBON FIBER REINFORCED ALUMINUM (CARALL) LAMINATES

by

GURPINDER SINGH DHALIWAL

Advisor: Dr. Golam Newaz

Major: Mechanical Engineering

Degree: Doctor of Philosophy

The main aim of this research work was to investigate the static and dynamic properties of carbon fiber reinforced aluminum laminates cured without using any external adhesive and acid treatment of aluminum layers. A comprehensive study was undertaken to study the effect of adding epoxy resin rich polyester synthetic surface veil cloth layers on the failure modes and flexural and tensile response of these fiber metal laminates (FMLs). The main purpose of adding veil …

A Multi-Scale Approach To Study Solid Oxide Fuel Cells: From Mechanical Properties And Crystal Structure Of The Cell's Materials To The Development Of An Interactive And Interconnected Educational Tool, Amjad Aman

Electronic Theses and Dissertations

Solid Oxide Fuel Cells are energy conversion devices that convert chemical energy of a fuel directly into electrical energy. They are known for being fuel-flexible, have minimal harmful emissions, ideal for combined heat and power applications, highly energy-efficient when combined with gas or steam turbines. The current challenges facing the widespread adoption these fuel cells include cost reduction, long-term testing of fully integrated systems, improving the fuel cell stack and system performance, and studies related to reliability, robustness and durability. The goal of this dissertation is to further the understanding of the mechanical properties and crystal structure of materials used …

Backward Dijkstra Algorithms For Finding The Departure Time Based On The Specified Arrival Time For Real-Life Time-Dependent Networks, Gelareh Bakhtyar, Vi Nguyen, Mecit Cetin, Duc Nguyen

Civil & Environmental Engineering Faculty Publications

A practical transportation problem for finding the “departure” time at “all source nodes” in order to arrive at “some destination nodes” at specified time for both FIFO (i.e., First In First Out) and Non-FIFO “Dynamic ” Networks is considered in this study. Although shortest path (SP) for dynamic networks have been studied/documented by various researchers, contributions from this present work consists of a sparse matrix storage scheme for efficiently storing large scale sparse network’s connectivity, a concept of Time Delay Factor (TDF) combining with a “general piece- wise linear function” to describe the link cost as a function of time …

Nebraska Summary: S1061 Massey Ferguson 7716, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1056 New Holland T7.315, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1057 Massey Ferguson 7714, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1031 Challenger Mt565e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1033 Challenger Mt585e, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1029a Massey Ferguson 7726s, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1026 Massey Ferguson 7720, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1025 Massey Ferguson 7719, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1028 Massey Ferguson 7724, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1064 Massey Ferguson 7718, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1063 Massey Ferguson 7718, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1079 New Holland T7.270, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1075 New Holland T7.210, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1073 New Holland T7.175, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1074 New Holland T7.190, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …