Mechanical Engineering Commons^™

Human-Assisted Fluid Power Vehicle, Aaron Huntoon

Honors Theses

The rising cost of energy has prompted industrial and technology companies to research and implement renewable or green energy sources in every aspect of their business. This green technology can consist of sources such as: solar, wind, fluid, or others to create energy from renewable sources. The use of these various sources reduces the pollution associated with standard methods of energy development, and it will ultimately drive costs down to benefit the general population. One of the largest benefactors to the use of renewable energy sources is the transportation industry. Billions of people rely on various modes of transportation every …

Designing An Accessible Hall Effect Thruster, Matthew Baird

Honors Theses

A group of three Mechanical Engineering students have selected to design a 200 W Hall Effect Thruster to fulfill the Mechanical and Aeronautical Engineering senior design project. Preliminary studies were performed on the theory behind electric propulsion and plasma physics. The group designed the Western Hall Thruster and used COMSOL Multiphysics® simulation software to refine the magnetic circuit. The group then fabricated and performed magnetic testing of their thruster in Western Michigan University’s Aerospace Laboratory for Plasma Experiments. This testing will seek to prove that a standard research HET can be built by universities without substantial financial resources.

Wire + Arc Additive Manufacturing, Micheal Santangelo

GS4 Student Scholars Symposium

Additive manufacturing is a rapidly developing technology which promises to drastically reduce the cost and waste associated with manufacturing parts. However, current systems of additive manufacturing used for creating metal parts which are suitable for use in the aerospace, automotive, and defense industries are complex, expensive, and not robust enough to produce a wide range of part features and geometries. A relatively new method, called wire arc additive manufacturing(WAAM) is a low cost option that can create parts which have a near-net shape, and only require a small amount of post processing before they are ready for use. This system, …

Fabrication Of Nano-Scale Metal Organic Framework (Mof) Loaded Nanofibrous Membrane For Enhanced Gas Adsorption Performance, Wahiduz Zaman

GS4 Student Scholars Symposium

Nitrogen storage capacity was investigated on a highly efficient adsorbent nanoparticle called Metal Organic Framework (MOF). A copper-based MOF called MOF-199 has been synthesized from subsequent reaction of Copper nitrate (10 wt.%), Trimesic Acid (8 wt.%) and Triethylamine (0.3 wt.%). TEA served as a deprotonating agent to form small particles. The reactants were mixed in a solution of Dimethylformamide (DMF), Ethanol and Deionized water (1:1:1) and vigorously sonicated for an hour at room temperature. This yielded single blue octahedral MOF crystals which were later washed with mother solution and extracted via centrifuge. The MOFªs were later activated for gas adsorption …

Gas Gap Conductance Between Ht9 And Ss316, Michael Luke Scoggins, Chris Martinez

Student Research Symposium

Inside a nuclear reactor, it is important to understand in detail the heat transfer between surfaces. This research aims to ensure the safety of new fuel experiments in the Idaho National Laboratory test reactor by studying the thermal properties of stainless steel and high temperature steel surfaces with a microscopic gas gap between them. The complex behavior of the gas requires a combination of experimental and theoretical modeling. A technique called laser flash analysis is being applied to calculate the effective thermal conductivity of the metal-gas-metal composite sample. From there, gap conductance is calculated using the other known physical parameters …

The Design Of A Racing Simulator: A Three-Phase User Testing Approach, Jakob E. Rouleau, Eric J. Wach

Human Factors and Applied Psychology Student Conference

No abstract provided.

Optical Pulling Force And Tractor Beams, Nayan Kumar Paul

Student Theses and Dissertations

Light-matter interaction has been an interesting subject of intense analytical and experimental research since the formulation of Maxwell's electromagnetic wave theory. Optical forces exerted on particles excited by incident light waves have been studied for the last few decades. The interaction of light with materials gives rise to light scattering from the particle in the form of energy. The divergence of the Maxwell stress tensor provides a good approximation of the total optical forces on a particle. The divergence of the stress tensor is mathematically equal to the time average Lorentz force since 〈f ̅ 〉= -∇〈₸〉. Others have claimed …

Plastrar, Niall W. Rogers

Research Horizons Day Posters

No abstract provided.

Heating Element Including Carbon Nanotube (Cnt) Layer, Santhosh Kumar Loganathan, Virginie Rollin, Daewon Kim

Publications

Apparatus , materials , and techniques and techniques herein can include providing a deposited layer comprising a com posite material including carbon nanotubes ( CNTs ) . Accord ing to various examples , the composite can be applied to a substrate such as using a solution containing CNTs and other constituents such as sulfur . The solution can be spray applied to a substrate , or spin - coated upon a substrate , such as to provide a uniform , conductive , and optically - transpar ent film layer . In one application , such a film layer can be …

Modeling Of Methane Tank Depressurization In Cold Weather, Brittney Bridger-Burton, Kevin D. Cole

UCARE: Research Products

Non-metallic tanks are used in industry to store and transfer gasses such as methane. As the tanks are emptied, the properties of the gas change, causing heat transfer with the tank wall. When emptied while at low temperatures, liquid condensation can form and the tank lining can reach a critically low temperature, causing fracture to the tank wall. In this study, the emptying of methane in cold weather conditions from a non-metallic tank was modelled using Aspen Tech Software. A full tank of methane, at 250 bar and 288 K, was cooled to the following starting temperatures: 263, 253, 243, …

Al/Ti Nanostructured Multilayers: From Mechanical, Tribological, To Corrosion Properties, Sina Izadi

USF Tampa Graduate Theses and Dissertations

Nanostructured metallic multilayers (NMMs) are well-known for their high strength in smaller bilayer thicknesses. Six Al/Ti (NMM) with different individual layer thickness were tested for their mechanical hardness using a nanoindentation tool. Individual layer thicknesses were chosen carefully to cover the whole confined layer slip (CLS) model. Nano-hardness had a reverse relation with the square root of individual layer thickness and reached a steady state at ~ 5 nm bilayer thickness. Decreasing the layer bilayer thickness from ~ 104 nm to ~ 5 nm, improved the mechanical hardness up to ~ 101%. Residual stresses were measured using grazing incident X-ray …

Molecular Combing Of Dna Nanofibers And Comparison To Electrospinning, Tanner L. Buresh

UCARE: Research Products

The goal of these experiments was to create DNA nanofibers through the method of molecular combing (MC) and then compare the MC fibers to fibers created with electrospinning (ES). The experiment was designed and initial samples were created. After confirming that the method would succeed in creating DNA fibers, several parametric studies were performed in order to optimize the experiment and create the most uniform fibers possible. The parametric studies were done on the following variables: substrate material, pH level of DNA solution, and DNA solution concentration. After completion of all experiments, it was determined that although fibers could be …

Parametric Analysis Of A Solid Oxide Fuel Cell Auxiliary Power Unit Operating On Syngas Produced By Autothermal Reforming Of Hydrocarbon Fuels, Jun Dong, Xinhai Xu, Ben Xu, Shuyang Zhang

Mechanical Engineering Faculty Publications

A 1 kWe integrated auxiliary power unit (APU) system consisting of an autothermal reformer and a solid oxide fuel cell (SOFC) unit, as well as balance-of-plant components, was designed and analyzed. A relatively easy-to-approach SOFC model was developed in order to conveniently calculate V-I and P-I curves and the system's net efficiency at different operating conditions. The effects of steam to carbon and oxygen to carbon ratios in the reactants, channel dimensions of the SOFC unit, and hydrocarbon fuel types on the integrated APU system's performance were discussed. Five hydrocarbon fuels including diesel, Jet-A, gasoline, ethanol, and methanol were studied …

Spatio-Temporal Linear Stability Analysis Of Stratified Planar Wakes: Velocity And Density Asymmetry Effects, Benjamin Emerson, Swapnil Jagtap, J. Mathew Quinlan, Michael W. Renfro, Baki M. Cetegen, Tim Lieuwen

Mechanical Engineering Faculty Publications

This paper explores the hydrodynamic stability of bluff body wakes with non-uniform mean density, asymmetric mean density, and velocity profiles. This work is motivated by experiments [S. Tuttle et al., “Lean blow off behavior of asymmetrically-fueled bluff body-stabilized flames,” Combust. Flame 160, 1677 (2013)], which investigated reacting wakes with equivalence ratio stratification and, hence, asymmetry in the base flow density profiles. They showed that highly stratified cases exhibited strong, narrowband oscillations, suggestive of global hydrodynamic instability. In this paper, we present a local hydrodynamic stability analysis for non-uniform density wakes that includes base flow asymmetry. The results show …

Densification Of W-Ni-Fe Powders Using Laser Sintering, Xuan Wang, Matthew Wraith, Stephen Burke, Howard Rathbun, Kyle Devlugt

Industrial and Manufacturing Engineering

In this paper, Laser Sintering (LS) of 90%W–7%Ni–3%Fe (wt.%) powders have been investigated, with the goal to understand the influence of final density by laser power, scanning speed, laser trace width, and the number of scanning passes. The results suggest that the laser power and scanning speed are the most important factors influencing density; the influence of trace width and number of scanning passes are not significant. With the increase of laser power and decrease of scanning speed, higher density can be achieved. The microstructure analysis indicated that the porosity changed from open porosity to closed porosity with higher laser …

Multi-Axial Failure Of High-Performance Fiber During Transverse Impact, Matthew C. Hudspeth

Open Access Dissertations

The effect of projectile nose geometry on ensuing wave development in high-performance yarns is explored during single yarn transverse impact. Special attention has been placed on visualizing the immediate region around the projectile-yarn contact site for 0.30-cal round, 0.30-cal fragment simulation projectiles (FSP), and razor blades using high-speed imaging. Kevlar® KM2, Dyneema®SK76 and AuTx have been impacted at velocities ranging from ∼100 m/s to ∼1200 m/s depending on projectile nose shape, with an emphasis set on determining the critical velocity wherein below said velocity significant development of wave propagation occurs and above said velocity the yarn fails immediately upon impact. …

Preliminary Design Tools In Turbomachinery: Non-Uniformly Spaced Blade Rows, Multistage Interaction, Unsteady Radial Waves, And Propeller Horizontal-Axis Turbine Optimization, Yujun Leng

Open Access Dissertations

Turbomachinery flow fields are inherently unsteady and complex which makes the related CFD analyses computationally intensive. Physically based preliminary design tools are desirable for parametric studies early in the design stage, and to provide deep physical insight and a good starting point for the later CFD analyses. Four analytical/semi-analytical models are developed in this study: 1) a generalized flat plate cascade model for investigating the unsteady aerodynamics of a blade row with non-uniformly spaced blades; 2) a multistage interaction model for investigating rotor-stator interactions; 3) an analytical solution for quantifying the impeller wake convection and pressure wave propagating between a …

A Study On The Sustainable Machining Of Titanium Alloy, Abdulhameed Alaa Dawood

Masters Theses & Specialist Projects

Titanium and its alloy (Ti-6Al-4V) are widely used in aerospace industries because of their light weight, high specific strength, and corrosion resistance. This study conducted a comparative experimental analysis of the machinability of Ti-6Al-4V for conventional flood coolant machining and sustainable dry machining. The effect of cutting speed, feed rate, and depth of cut on machining performance has been evaluated for both conditions. The machining time and surface roughness were found to be lower in dry machining compared to flood coolant machining. The tool wear was found to be unpredictable, and no significant difference was observed for dry and coolant …

Optimization Of Process Parameters In Micro Electrical Discharge Machining (Edm) Of Ti-6al-4v Alloy, Farshid Alavi

Masters Theses & Specialist Projects

Ti-6Al-4V has a wide range of applications such as in the automotive and aerospace industries. Nevertheless, titanium alloys are very difficult to machine by conventional methods. Micro-EDM is a non-conventional machining method that uses the thermal effect of precisely controlled sparks. Manufacturers are looking for the methods and optimal settings to increase the productivity of micro-EDM in terms of lessening machining time and tool wear. Moreover, surface integrity of the machined area is crucial for some products such as biomedical implants.

The objective of this study was to investigate the effects of the micro-EDM process parameters on response variables, in …

Stiffness Reduction Strategies For Additively Manufactured Compliant Mechanisms, Ezekiel G. Merriam

Theses and Dissertations

This work develops and examines design strategies for reducing the stiffness of 3D-printed compliant mechanisms. The three aspects of a flexure that determine its stiffness are well known: material, boundary conditions, and geometry. In a highly constrained design space however, flexure stiffness may remain unacceptably high even while arriving at the limits of design constraints. In this work, changes to geometry and boundary conditions are examined that lead to drastically reduced stiffness behavior without changing flexure thickness, width, or length. Changes to geometry can result in very complex mechanisms. However, 3D printing enables almost arbitrarily complex geometries. This dissertation presents …

Thermal Properties, Crystallinity, And Oxygen Permeability Of Na-Montmorillonite Reinforced Plasticized Poly(Lactic Acid) Film, Kurniawan Yuniarto, Yohanes Aris Purwanto, Setyo Purwanto, Bruce A. Welt, Hadi Karia Purwadaria, Titi Candra Sunarti

Makara Journal of Technology

Introducing unmodified organically clay/Na-montmorillonite (Na-MMT) was applied into plasticized poly(lactic acid) PLA to produce film composites by direct casting. Film composite structure, the crystallinity degree and form, and thermal properties were carried out using X-ray diffraction and differential scanning calorimetry. The effect of Na- MMT to the tortuous path and the crystallinity degree in the plasticized film composites were calculated in oxygen barrier properties. Chromatogram film composites resulted in an intercalated structure that showed peak diffraction angle shift at about 0.2o. Then, a peak diffraction pattern was indicated in α-form crystal structure. Plasticized PLA has a crystallinity degree at 34%, …

Residual Strength Analysisof Asymmetrically Damaged Ship Hull Girderusing Beam Finite Element Method, Muhammad Zubair Muis Alie

Makara Journal of Technology

The objective of the present study is to analyze the residual strength of asymmetrically damaged ship hull girder under longitudinal bending. Beam Finite Element Method is used for the assessment of the residual strength of two single hull bulk carriers (Ship B1 and Ship B4) and a three-cargo-hold model of a single-side Panamax Bulk Carrier in hogging and sagging conditions. The Smith’s method is adopted and implemented into Beam Finite Element Method. An efficient solution procedure is applied; i.e. by assuming the cross section remains plane, the vertical bending moment is applied to the cross section and three-cargo-hold model. As …

Discrete Power Control In Heterogenous Networks, Yuanyuan Wang, Wibowo Hardjawana, Branka Vucetic

Makara Journal of Technology

In heterogeneous networks (HetNets) where femtocell base stations (FBSs) are deployed within the radio coverage of macrocell base stations (MBSs) to increase network capacity, co-channel interference limits overall system performance with universal frequency reuse. This paper investigates new distributed downlink discrete power control scheme for FBSs in HetNets with FBSs cooperation. The objective of the proposed power control scheme is to maximize the number of simultaneous FBSs transmissions in a single transmission wireless channel where each FBS is allowed to transmit only if the signal-to-interference-noise ratio (SINR) requirements for both FBSs and MBS users are satisfied. We apply a stochastic …

Multi-Project Scheduling Cost Optimization In A Machine Manufacturer Engineer-To-Order, Farizal Farizal, Amar Rachman, Tifani Tandean, Sumarsono Sudarto, Katsuhiko Takahashi

Makara Journal of Technology

This paper discusses the utilization of mixed integer linear programming (MILP) model to optimize cost for multiproject scheduling in a machine maker company. The objective is to minimize total project’s penalty cost and labor cost. The model formulated shows how to achieve the objective i.e. whether to use outsourcing or overtime to finish all projects. The model of multi-project scheduling was solved by Branch & Bound algorithm coded in Lingo 14.0 software. The case study shows that if a company wants to minimize lateness, it should use overtime instead of outsourcing, which minimize total lateness of projects by 144 days …

Analysis Of Arm Movement Prediction By Using The Electroencephalography Signal, Reza Darmakusuma, Ary Setijadi Prihatmanto, Adi Indrayanto, Tati Latifah Mengko, Lidwina Ayu Andarini, Achmad Furqon Idrus

Makara Journal of Technology

Various technological approaches have been developed in order to help those people who are unfortunate enough to be afflicted with different types of paralysis which limit them in performing their daily life activities independently. One of the proposed technologies is the Brain-Computer Interface (BCI). The BCI system uses electroencephalography (EEG) which is generated by the subject’s mental activity as input, and converts it into commands. Some previous experiments have shown the capability of the BCI system to predict the movement intention before the actual movement is onset. Thus research has predicted the movement by discriminating between data in the “rest” …

Impact Of Additive Manufacturing Technologies And The Development Ofa Mixed Metal Powderbed Additive Manufacturing System, Gerald L. Knapp

Honors Capstones

No abstract provided.

Utilizing Tunable Signal Interference Control Topologies With Electromechanical Resonators, Bryce A. Geesey

Open Access Theses

Exploiting knowledge gained from previous investigations of channelized and trans-versal filters, signal interference filters use transmission line differences to generate transmission zeros through phase-shifted combinations of signals at the output of a device. The transmission lines used in these circuits are straightforward to design, but are limited to high-frequency signals (on the order of a few gigahertz) due to the necessity for spatial compactness and low loss. More recent studies have used electromechanical resonators to achieve phase shifting and quality factor improvements at slightly-lower frequencies. These concepts may prove useful if extended to micro- and nanoscale resonators.

To explore signal …

The Effect Of Confinement On The Development Of An Axisymmetric Wall Jet In Confined Jet Impingement, Tianqi Guo

Open Access Theses

Impinging jets have been widely used in the industry for cooling, heating, drying and many other purposes due to their excellent level of mass and heat transfer capacities. When issued into a confinement gap fully filled with working liquid, which is a typical configuration for the compact cooling devices designed to handle the extremely high heat fluxes generated by continuously working electronic components, they are classified as submerged confined impingement jets. Though the complicated flow field induced by the jet has attracted enormous amount of research efforts from heat transfer as well as fluid dynamics points of view, many key …

Mixed Mesh/Nodal Magnetic Equivalent Circuit Modeling Of A Six-Phase Claw-Pole Automotive Alternator, Daniel C. Horvath

Open Access Theses

Magnetic equivalent circuits (MECs) have been employed by many researchers to model the relationship between magnetic flux and current in electromagnetic systems such as electric machines, transformers and inductors [1] ,[2]. Magnetic circuits are analogous to electric circuits where voltage, current, resistance and conductance are the respective counterparts of magneto-motive force (MMF), magnetic flux, reluctance and permeance. The solution of MECs can be accomplished with the plethora of techniques developed for electrical circuit analysis. Specifically, mesh analysis, based on Kirchoff’s Voltage Law (KVL), and nodal analysis, based on Kirchoffs Current Law (KCL), are two very common solution techniques. Once an …

Modifications To Johanson's Roll Compaction Model For Improved Relative Density Predictions, Yu Liu

Open Access Theses

Johanson’s roll compaction model [J.R. Johanson, A rolling theory for granular solids, ASME Journal of Applied Mechanics E32 (1965) 842–848] is modified to improve its predictions of a compacted ribbon’s relative density. Previous work has shown that the maximum roll pressure and ribbon relative density predicted by the Johanson model are not only larger than those predicted from finite element method (FEM) simulations, but also unphysical in some cases. This over-prediction is due to a one-dimensional flow assumption in the Johanson model. Real powder velocity profiles within a roll compactor are non-uniform.

Johanson’s analysis is modified in this work to …