Materials Science and Engineering Commons^™

Heat Transfer In Silicon - Experiments And Simulation, Chihlin Huang

Theses

The purpose of this thesis is to study the heat transfer in silicon. Silicon is the key semiconductor material, and thermal processing is the traditional method that is used in semiconductor processing. In this research, we can predict the temperature of the silicon wafer during heating. This ability to predict wafer temperature during semiconductor processing will facilitate in the following: (a) Process temperature uniformity, (b) Film thickness uniformity, (c) Diffusion, (d) Process yield, (e) Thermally induced stresses, and (f) Device yield - spatially and temporally across the wafer. For low temperature applications, IC chips can be modeled to simulate the …

Electrical, Electronic And Optical Properties Of Mose2 And Wse2, Sushant Shashikant Rassay

Theses

Transition-metal dichalcogenides (TMDC) crystals have emerged as a new class of semiconductors that display distinctive properties at monolayer thickness. Their electrical, electronic and optical properties are of particular interest and importance for applications in optoelectronics as light emitters, detectors, and photovoltaic devices. Monolayer MoSe₂ and WSe₂ have an intrinsic band-gap in the visible region of the solar spectrum (400nm - 700nm) which makes them distinct from other 2-D materials like graphene.

In this study, the electrical, electronic and optical properties of monolayer and bulk MoSe₂ and WSe₂ are studied. The electronic band structures are presented for …

Electrical, Electronic And Optical Properties Of Mos2 & Ws2, Weitao Tang

Theses

Two dimensional materials such as graphene, boron nitride and transition metal dichalcogenide (TMDCs) monolayers have arisen as a new class of materials with unique properties at monolayer thickness. Their electrical, electronic and optical properties are of great importance for a variety of applications in optoelectronics as light emitters, detectors, and photovoltaic devices. This work focuses on MoS₂ and WS₂, which are two important members of the TMDC class of materials. The properties of monolayer MoS₂ and WS₂ are investigated as well as the properties of bulk MoS₂ and WS₂ to provide an understanding …

Structure And Physical Properties Of Srniru5O11 Single Crystals: An R-Type Ferrite Based On Ordered Kagome Nets, L. Shlyk, Lance E. De Long, R. Niewa

Physics and Astronomy Faculty Publications

Single crystals of the R-type ferrite SrNiRu₅O₁₁ were grown from a chloride flux. The hexagonal crystal structure contains ruthenium located on distorted kagome nets. The low-temperature dc magnetic susceptibilities (χ_⊥ and χ_∥, perpendicular and parallel to the c axis, respectively) diverge as T^−0.3, and do not exhibit any indication of long-range magnetic order down to 4.5 K. The electrical resistivity varies as T^1.6 below 40 K, which is typical of non-Fermi liquids, and may originate from a competition between residual magnetic interactions among Ni²⁺ (S = 1) spins …

Field-Induced Formation And Growth Of Pillars On Films Of Bisphenol-A-Polycarbonate, Yu-Fan Chuang, Jyun-Siang Peng, Fuqian Yang, Donyau Chiang, Sanboh Lee

Chemical and Materials Engineering Faculty Publications

An electric field is used to construct pillars on films of bisphenol-A-polycarbonate (BPAPC) between two parallel electrodes. Both the size and density of the pillars are dependent on the film thickness. For the same experimental conditions, thicker films will lead to the formation of pillars of larger sizes and smaller densities. The time dependence of the average diameter of the pillars is found to be a linear function of the square root of the difference between the annealing time and incubation time. The temperature dependence of the temporal evolution of the pillars follows the Arrhenius relation with an activation enthalpy …

Open-Source Automated Mapping Four-Point Probe, Handy Chandra, Spencer W. Allen, Shane W. Oberloier, Nupur Bihari, Jephias Gwamuri, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Scientists have begun using self-replicating rapid prototyper (RepRap) 3-D printers to manufacture open source digital designs of scientific equipment. This approach is refined here to develop a novel instrument capable of performing automated large-area four-point probe measurements. The designs for conversion of a RepRap 3-D printer to a 2-D open source four-point probe (OS4PP) measurement device are detailed for the mechanical and electrical systems. Free and open source software and firmware are developed to operate the tool. The OS4PP was validated against a wide range of discrete resistors and indium tin oxide (ITO) samples of different thicknesses both pre- and …

Availability: A Metric For Nucleic Acid Strand Displacement Systems, Xiaoping Olson, Shohei Kotani, Jennifer E. Padilla, Natalya Hallstrom, Sara Goltry, Jeunghoon Lee, Bernard Yurke, William L. Hughes, Elton Graugnard

Materials Science and Engineering Faculty Publications and Presentations

DNA strand displacement systems have transformative potential in synthetic biology. While powerful examples have been reported in DNA nanotechnology, such systems are plagued by leakage, which limits network stability, sensitivity, and scalability. An approach to mitigate leakage in DNA nanotechnology, which is applicable to synthetic biology, is to introduce mismatches to complementary fuel sequences at key locations. However, this method overlooks nuances in the secondary structure of the fuel and substrate that impact the leakage reaction kinetics in strand displacement systems. In an effort to quantify the impact of secondary structure on leakage, we introduce the concepts of availability and …

Identifying Two Regimes Of Slip Of Simple Fluids Over Smooth Surfaces With Weak And Strong Wall-Fluid Interaction Energies, Haibao Hu, Luyao Bao, Nikolai V. Priezjev, Kai Luo

Mechanical and Materials Engineering Faculty Publications

The slip behavior of simple fluids over atomically smooth surfaces was investigated in a wide range of wall-fluid interaction (WFI) energies at low shear rates using non-equilibrium molecular dynamics simulations. The relationship between slip and WFI shows two regimes (the strong-WFI and weak-WFI regimes): as WFI decreases, the slip length increases in the strong-WFI regime and decreases in the weak-WFI regime. The critical value of WFI energy that separates these regimes increases with temperature, but it remains unaffected by the driving force. The mechanism of slip was analyzed by examining the density-weighted average energy barrier (∆E) encountered by fluid atoms …

Fatigue Properties And Damage Mechanism Of A Cr-Mn Austenite Steel, Z. Q. Lv, Pei Cai, T. Yu, Yan Jin, H. F. Zhang, Tongguang Zhai, W. T. Fu

Chemical and Materials Engineering Faculty Publications

The fatigue properties and the damage mechanism of a Cr-Mn austenite steel were investigated using four-point bend fatigue testing. The stress-number of cycles to failure (S-N) curve of the Cr-Mn austenite steel was measured at room temperature, at the frequency of f=20 Hz and the stress ratio of R=0.1. The fatigue strength of this Cr-Mn austenite steel was measured to be 503 MPa in the maximum stress. Multiple cracks are initiated on the sample surface after fatigue failure tests, and usually only one or two of them can lead to the final failure of the samples. Most of the cracks …

Effect Of Liquid Contamination On Hermeticity And Seal Strength Of Flexible Pouches With Lldpe, Francesca Delle Cese, Koushik Saha, S. Roy, Jay Singh

Journal of Applied Packaging Research

Flexible packaging is a growing successful market and the majority of flexible package applications are for the food industry. The demand for process optimization and reduced production costs, has led to an increase in flexible packaging. However, fast production lines can result in contamination in the seal area. For flexible food packaging, contamination is considered any food particle or substance trapped in the seal area. Current quality control processes can detect contamination in the seal area, but it is not determined if seal contamination affects seal quality. Oil-based and sodium based snack foods are two common categories that can be …

Quality Improvement In Drilling Silicon By Using Micro Laser Assisted Drilling, Barkin Bakir

The Hilltop Review

The micro-laser assisted drilling (µ-LAD) of monocrystalline silicon (100), using a diamond cutting tool coupled with a laser, was tested in order to improve the cutting edge quality of a drilled samples. The laser beam is transmitted through an optically transparent diamond drill bit and focused precisely at the tool-workpiece interface, where the material is under high pressure induced by the diamond tool. The influence of the laser power on the quality and the inner surface finish of the drilled materials is investigated. Different laser powers were used to carry out the experiments. The experimental results indicated that the µ-LAD …

Interplay Of Composition, Structure, And Electron Density Of States In W-Os Cathode Materials And Relationship With Thermionic Emission, Qunfei Zhou, Thomas John Balk, Matthew J. Beck

Chemical and Materials Engineering Faculty Publications

The presence and composition of W-Os alloys have been found to significantly affect the thermionic emission properties of Os-coated tungsten dispenser cathodes. However, the comprehensive understanding of structure–property relationships needed to design improved tungsten cathodes with larger thermionic emission is still lacking. In this study, composition–structure–property relationships governing thermionic emission from W-Os alloys were investigated using quantum mechanical calculations. Low-energy W-Os atomic configurations at various compositions were determined from first-principles calculations based on density functional theory in combination with cluster expansion calculations. Electronic properties were investigated in terms of the electron density of states. The relative position of the Fermi …

Inhibition Of Mammalian Glycoprotein Ykl-40 Identification Of The Physiological Ligand, Abhishek A. Kognole, Christina M. Payne

Chemical and Materials Engineering Faculty Publications

YKL-40 is a mammalian glycoprotein associated with progression, severity, and prognosis of chronic inflammatory diseases and a multitude of cancers. Despite this well documented association, identification of the lectin′s physiological ligand and, accordingly, biological function has proven experimentally difficult. YKL-40 has been shown to bind chito-oligosaccharides; however, the production of chitin by the human body has not yet been documented. Possible alternative ligands include proteoglycans, polysaccharides, and fibers like collagen, all of which makeup the extracellular matrix. It is likely that YKL-40 is interacting with these alternative polysaccharides or proteins within the body, extending its function to cell biological roles …

Design And Validation Of Novel Potential High Entropy Alloys, Boliang Zhang

LSU Doctoral Dissertations

The design approach and validation of single phase senary refractory high entropy alloys (HEAs) MoNbTaTiVW and HfNbTaTiVZr were presented in first part of this dissertation. The design approach was to combine phase diagram inspection of available binary and ternary systems and Calculation of Phase Diagrams (CALPHAD) prediction. Experiments using X-ray diffraction and scanning electron microscopy techniques verified single phase microstructure in body centered cubic lattice for both alloys. The observed elemental segregation agrees well with the solidification prediction using Scheil model. The lattice constant, density and microhardness were measured to be 0.3216 nm, 4.954 GPa and 11.70 g/cm³ for …

A Multiscale Model For Damage Progression And Detection In Piezo/Pyroelectric Composite Laminates, Yehia Bahei-El-Din, Amany Micheal

Centre for Advanced Materials

Assessment of damage initiation and progression in composite structures reinforced with electrically active filaments is modelled in a multiscale analysis. The analysis developed is a two-tier, interactive analysis, which involves two length scales; macroscopic, and microscopic. The proposed multiscale analysis provides seamless integration of the mechanics at the two length scales, including piezoelectric and pyroelectric coupling effects and damage under overall thermomechanical loads and an electric field applied to electroactive fibers. The macromechanical analysis is performed for multidirectional, fibrous laminates using the lamination theory, including bending, and the micromechanical analysis is performed using a two-phase model and a periodic array …

Tensile Specimen Punch, John Allen

All Undergraduate Projects

This project comes from a need to have tensile specimens made for the MET 351, Metallurgy/Materials and Processes, and 426, Applied Strengths of Materials, labs. This punch is designed to be used with an arbor press to create the desired tensile specimen shape out of plastic blanks. The initial concept was suggested by Dr. Craig Johnson. The designs went through many changes, for example getting rid of the sides originally proposed to hold the specimen in place, and modifications to other parts to make them more efficient. Additional parts were also added to the design with the help and advice …

Composite Cold Expansion Tooling, Andrew Amos

All Undergraduate Projects

In the world of aircraft manufacturing, cold expansion products literally hold these aircraft together. The problem faced today is that the Little Brute Hydraulic Puller designed and built by Fatigue Technology Inc. is a handheld steel hydraulic cylinder that is heavy and expensive to produce. In a market that demands continuous improvement, there is a constant push to make the product cheaper, better and lighter. In order to accomplish this demand a composite tube will be substituted in the design as the primary pressure cylinder instead of the traditional steel pressure cylinder in order to create a lighter and cheaper …

Detecting Laminate Damage Using Embedded Electrically Active Plies – An Analytical Approach, Amany Micheal, Yehia Bahei-El-Din

Centre for Advanced Materials

Assessment of damage initiation and progression in composite laminates with embedded electrically active plies is modeled. Utilizing electrically active layers embedded in composite laminates as damage sensors is proposed by several researchers and is mainly assessed experimentally. Sensing damage using embedded electrically active plies is generally preferred over the use of surface mounted PZT wafers since the range of the latter is limited to a very narrow area underneath the surface, while multiple damage mechanisms can generally be found in several plies of the laminate. The solution presented invokes two levels of analysis. Firstly, on the laminate level, applied membrane …

A Simple Embedded Atom Potential For Palladium-Hydride, Yang Zhang

Theses, Dissertations and Capstones

Metal Hydride systems are an important research topic in material science because of their many practical, industrial, and scientific applications. Therefore, the development of reliable and efficient interatomic potentials for metal hydrides systems, to be utilized in atomistic modeling, can be of great value in accelerating the research in this field. The embedded-atom method (EAM), based on the density functional theory (DFT), has the advantage of being both computationally efficient and being well suited for modeling metal hydride systems. In this work, the author has developed an efficient EAM potential for the palladium hydride (Pd-H) alloy system. Contrary to previously …

Computational Modeling Of Percolation Conduction And Diffusion Of Heterogeneous Materials, Jian Qiu

Electronic Theses and Dissertations

Heterogeneous materials provide a unique combination of desirable mechanical, thermal or electrical properties. This dissertation presents several micro-structure modeling approaches to predict the effective properties of heterogeneous materials and demonstrates its certain application toward two highly heterogeneous, unconventional structural composite materials (carbon fiber reinforced composite materials and graphene nanoplatelets composite). By using the efficient computational algorithm based on the FEA, a randomly oriented disk-shaped particles system are generated. A new element partition scheme based on the vector operations and geometry of inclusion has been implemented to mesh the intersected disks. The computed equivalent conductivity is expressed as a power-law function …

Assessment Of Individual Photovoltaic Module Performance After 26 Years Of Field Exposure At The Telonicher Marine Lab In Trinidad, California, Jake Rada

Projects

In 1990, 192 ARCO M75 photovoltaic (PV) modules were installed as a part of the Schatz Solar Hydrogen Project at the Humboldt State University (HSU) Telonicher Marine Lab in Trinidad, California, within 150 m of the Pacific Ocean. This 9.2 kW-rated PV array was used to power the marine laboratory air compressor and an electrolyzer. Individual current-voltage (IV) curve tests were performed on each of the PV modules prior to the array’s construction in 1990 and again in 2001, 2010, and, most recently, in 2016, following decommissioning of the array. After 25.5 years of use, 188 of the original 192 …

Fabricating Zirconia Parts With Organic Support Material By The Ceramic On-Demand Extrusion Process, Wenbin Li, Amir Ghazanfari, Devin Mcmillen, Andrew Scherff, Ming Leu, Gregory Hilmas

Faculty Publications, Mechanical Engineering

Ceramic On-Demand Extrusion (CODE) is an extrusion-based additive manufacturing process recently developed for fabricating dense, functional ceramic components. This paper presents a further development of this process and focuses on fabricating 3 mol% yttria-stabilized zirconia (3YSZ) components that cannot be fabricated without using support structures. The 3YSZ paste is deposited through the main nozzle, and a polycaprolactone (PCL) pellet feedstock is melted and deposited through an auxiliary nozzle to build support structures. After a green part is printed and dried, the support structures are removed by heating the part to ~70°C to melt the PCL. The part is then sintered …

Synthesis Of Discrete Transition Metal (Ni, Fe, Co, Mn) Phosphide Nanoparticles: Compositional Effect On Catalytic And Magnetic Properties, Da Li

Wayne State University Dissertations

This dissertation research is focused on the synthesis, characterization of binary and ternary transition metal (Ni, Co, Fe, Mn) phosphide nanomaterials and their catalytic and magnetic properties.

A phase-control strategy enabling the arrested-precipitation synthesis of nanoparticles of Ni5P4 and NiP2 is presented. The composition and purity of the product can be tuned by changing key synthetic levers, including the metal precursor, the oleylamine (OAm) and Trioctylphosphine (TOP) concentrations, temperature, time and the presence or absence of a moderate temperature soak step to facilitate formation of Ni and/or Ni-P amorphous nanoparticle intermediates.

New CoxFe2-xP nanoparticles (0 ≤ x ≤ 2), Co2-xMnxP …

Variable Oxidation & Defects In Ti-6al-4v Material In Electron Beam Melting Additive Manufacturing, Edward Patton Clark

Electronic Theses and Dissertations

Powder-based metal in additive manufacturing (AM) is advantageous for rapid prototyping of parts and components, with the benefit of reusing powder to reduce production costs. A common driver in the aerospace industry is free-form complex geometries which can be created using CAD software to optimize specifications with strength-to-weight ratios in components. Weight optimization of aircraft components using additive manufacturing reduces material, which significantly reduces production cost in comparison to cast and wrought metallic products. Large biomedical and aerospace industries heavily invest in feedstock metal powders that have low density under structural stresses and high temperatures, resulting in superior resistance to …

Electrode Integration Of Nanostructured Metal And Metal Oxide Materials Based On In-Situ Growth Methods For Environmental Sensors, Xiaochen Wang

Electronic Theses and Dissertations

In the past decades, increased human population and activities have introduced a large amount of pollutants into the environment. Various types of conventional analytical instruments were used for monitoring the emitted chemicals with low detection limit, high accuracy, and discrimination power. However, many of these methods are laboratory-based owing to sample collection, transportation, extraction, and purification steps. To make real-time on-site monitoring possible, miniaturized sensors with various integrated elements were developed. One of the most well-known strategies is to utilize nanostructured materials with enhanced sensing properties for those devices. For a majority of the current state of art devices, the …

Dynamic Coupling Of Phase-Heat And Mass Transfer In Porous Media And Conjugate Fluid/Porous Domains, Mahmoud Mohamed Mostafa Elhalwagy, Anthony G. Straatman

Mechanical and Materials Engineering Publications

No abstract provided.

Zwitterionic Polymer Materials For Nanoparticle Stabilization, Cell Encapsulation And Anti-Fouling Coating, Wei Wang

Wayne State University Dissertations

Based on the superior anti-fouling property, the zwitterionic materials had great potential in applications such as medical implants, medical device coating, and marine coating industry. This thesis will focus on the applications of zwitterionic materials in stabilizing carbon nanoparticles, as implantable devices and durable coating on medical devices for long-term anti-microbial purposes. Chapter 2 of the thesis will discuss a simple method to synthesis carbon nanoparticles stabilized by zwitterionic polymers. Chapter 3 of the thesis reports the use of zwitterionic hydrogel to encapsulate islet of Langerhans to treat Type 1 diabetes. In Chapter 4 and 5, several methods were developed …

Ferroelectricity And The Phase Transition In Large Area Evaporated Vinylidene Fluoride Oligomer Thin Films, Keith Foreman, Shashi Poddar, Stephen Ducharme, Shireen Adenwalla

Shireen Adenwalla Papers

Organic ferroelectric materials, including the well-known poly(vinylidene fluoride) and its copolymers, have been extensively studied and used for a variety of applications. In contrast, the VDF oligomer has not been thoroughly investigated and is not widely used, if used at all. One key advantage the oligomer has over the polymer is that it can be thermally evaporated in vacuum, allowing for the growth of complex heterostructures while maintaining interfacial cleanliness. Here, we report on the ferroelectric properties of high-quality VDF oligomer thin films over relatively large areas on the order of mm². The operating temperature is identified via …

Defect Engineering: A Path Toward Exceeding Perfection, Hamed Attariani, Kasra Momeni, Kyle R. Adkins

Mechanical and Materials Engineering Faculty Publications

Moving to nanoscale is a path to get perfect materials with superior properties. Yet defects, such as stacking faults (SFs), are still forming during the synthesis of nanomaterials and, according to common notion, degrade the properties. Here, we demonstrate the possibility of engineering defects to, surprisingly, achieve mechanical properties beyond those of the corresponding perfect structures. We show that introducing SFs with high density increases the Young’s Modulus and the critical stress under compressive loading of the nanowires above those of a perfect structure. The physics can be explained by the increase in intrinsic strain due to the presence of …

Four-Terminal Square Piezoresistive Sensors For Mems Pressure Sensing, Awlad Hossain, Ahsan Mian

Mechanical and Materials Engineering Faculty Publications

The sensitivity of four-terminal piezoresistive sensors commonly referred to as van der Pauw (VDP) structure is investigated. The VDP sensor is considered to be fabricated on (100) silicon due to its potential application in MEMS (microelectromechanical systems) pressure sensors. The sensitivity of the VDP sensor may be affected by misalignment during the etching/diffusion process, the nonuniformity of piezoresistive coefficients through the sensor thickness, and pad size with respect to the sensor size. For this particular analysis, the effect of VDP stress sensitivity on variations in pad sizes and through-the-thickness -coefficient variation are studied as the effect of misalignment has already …