Materials Science and Engineering Commons^™

Improving Single Use Bioreactor Design And Process Development Using The Hyperforma 5:1 S.U.B, Michael Goodwin

Single-use Technologies II: Bridging Polymer Science to Biotechnology Applications

Operating bioreactor vessels at low working volumes (high turn-down ratio) is often desirable but brings about challenges in regard to mixing, mass transfer, and process control. Research done towards optimizing cell culture has provided methods to improve performance and control when operating under these special conditions.  Impacts of enhanced energy transfer-Implementing bottom heat exchange, alternate impeller positions, and considering agitation dissipation rates.  Maximizing your platform-Taking advantage of the unique Thermo Fisher Scientific Drilled Hole Sparge design and implementing a new Cross Flow Sparge into the headspace have yielded reliable mass transfer and cell culture results from 10-2000L working …

Life Cycle Sustainability Analysis (Lcsa) Of Polymer-Based Piping For Plumbing Applications, Andy J. Rivas Bolivar

Senior Honors Projects, 2010-2019

Water conveyance systems play a critical role in modern developed areas. Polymer pipes have been used for about a century, and their convenient physical properties have positioned polymers as the leading material in the piping industry. Having such influence in the market means that changes in current material selection and manufacturing could lead to significant reductions in the footprint associated with their products. Currently, there are no comparative lifecycle assessments that evaluate the different polymer selections commercially available, which makes it hard to determine what products have the least impact on the environment. Understanding how such impacts are relative to …

Process Development And Implementation For The Imaging Of Heat Treated A2 Steel For Consolidation Into An Atlas, Jessica Roberts

Senior Honors Projects, 2010-2019

Material processes, properties, and microstructure are interconnected, often visualized as the points of a triangle. Changing the process a material goes through will in turn change the properties and microstructure of that material. In materials research and education (specifically with metals), comparison between research or experiment results and scholarly-accepted results is important. When reading textbooks addressing different properties of metals and the process of metal treatment, images are often shown of the various microstructures associated with each property or process stage. The difficulty comes in trying to compare the stages or properties to one another; often different materials and processes …

Investigating The Classical And Non-Classical Mechanical Properties Of Gan Nanowires, Mohammad Reza Zamani Kouhpanji

Electrical and Computer Engineering ETDs

Study and prediction of classical and non-classical mechanical properties of GaN is crucial due to the potential application of GaN nanowires (NWs) in piezoelectric, probe-based nanometrology, and nanolithography areas. GaN is mainly grown on sapphire substrates whose lattice constant and thermal expansion coefficient are significantly different from GaN. These discrepancies cause mechanical defects and high residual stresses and strains in GaN, which reduce its quantum efficiency.

Specifically, for nanoscale applications, the mechanical properties of materials differ significantly compared to the bulk properties due to size-effects. Therefore, it is essential to investigate the mechanical properties of GaN NWs using the non-classical …

Study Of Knowledge-Based System (Kbs) And Decision Making Methodologies In Materials Selection For Lightweight Aircraft Metallic Structures, Pashupati R. Adhikari, Reza Mirshams

Journal of Applied Science & Engineering Technology

This paper presents an overview of knowledge-based system (KBS) in the context of decision making methodologies used in materials selection for the design of light weight aircraft metallic structures. Overall aircraft weight reduction means substantially less fuel consumption and better efficiency. Part of the solution to this problem is to find a way to reduce overall weight of metallic structures in the aircraft. Two distinct multiple criteria decision making (MCDM) methodologies are presented with examples featuring a set of short-listed materials suitable in the design of the structures. Pre-defined constraint values, mainly mechanical properties, are employed as relevant attributes satisfying …

A Novel Technique For Designing High Power Semiconductor Optical Amplifier (Soa)-Based Tunable Fiber Compound-Ring Lasers Using Low Power Optical Components, Muhammad A. Ummy, Simeon Bikorimana, Roger Dorsinville

Publications and Research

A simple, stable and inexpensive dual-output port widely tunable semiconductor optical amplifier (SOA)-based fiber compound-ring laser structure is demonstrated. This unique nested ring cavity enables high optical power to split into different branches where amplification and wavelength selection are achieved by using low-power SOAs and a tunable filter. Furthermore, two Sagnac loop mirrors, which are spliced at the two ends of the compound-ring cavity not only serve as variable reflectors but also channel the optical energy back to the same port without using any high optical power combiner. We propose and discuss how the demonstrated fiber compound-ring laser structure can …

Compositionally Graded Indium Gallium Nitride Solar Cells, Christopher Matthews

Electrical Engineering Undergraduate Honors Theses

For the past several decades, methods to harvest solar energy have been investigated intensively. A majority of the work done in this field has been on solar cells made with silicon – the most mature semiconductor material. Recent developments in material fabrication and processing techniques have enabled other semiconductor materials to attract practical interest and research effort as well. Indium gallium nitride (InGaN) is one such material. The material properties of InGaN indicate that solar cells made with it have the potential to achieve much higher power density than a standard silicon solar cell. High power density InGaN solar cells …

Wettability Tailoring Of Nanotube Carpets: Morphology-Chemistry Synergy For Hydrophobic–Hydrophilic Cycling, Lymeng He, Anil Karumuri, Sharmila M. Mukhopadhyay

Mechanical and Materials Engineering Faculty Publications

Carpet-like arrays of carbon nanotubes (CNTs) on graphitic carbon materials have been investigated in order to understand all-carbon hierarchical structures for multifunctional surface-active devices. Pure CNT carpets are seen to be super-hydrophobic as long as they are well aligned. For future applications involving aqueous environments, the ability to tailor the surface wettability and switch it on demand can be very useful, and enable unprecedented devices related to microfluidics, catalysis and sensing/detection systems. In this study, microwave plasma treatments were used to functionalize CNT carpets for a progressive increase in wettability so that they could eventually become super-hydrophilic. This change could …

Computer Simulation Of Pore Migration Due To Temperature Gradients In Nuclear Oxide Fuel, Ian Wayne Vance

Graduate Theses and Dissertations

A phase-field simulation model is being presented that captures the thermal-gradient-driven migration of pores in oxide fuel associated with fuel restructuring. The model utilizes a Cahn-Hilliard equation supplemented with an advection term to describe the vapor transport of fuel material through the pore interior due to gradients in vapor pressure. In addition, the model also captures changes in a migrating pores’ morphology. Simulations demonstrate that the model successfully predicts pore migration towards the hottest portion of the fuel, the centerline. The simulations also demonstrate changes in pore shape that are in agreement with previous experimental observations. Initially isotropic pores are …

Characterization Of Plastic Deformation Evolution In Single Crystal And Nanocrystalline Cu During Shock By Atomistic Simulations, Mehrdad Mirzaei Sichani

Graduate Theses and Dissertations

The objective of this dissertation is to characterize the evolution of plastic deformation mechanisms in single crystal and nanocrystalline Cu models during shock by atomistic simulations. Molecular dynamics (MD) simulations are performed for a range of particle velocities from 0.5 to 1.7 km/s and initial temperatures of 5, 300 and 600 K for single crystal models as well as particle velocities from 1.5 to 3.4 km/s for nanocrystalline models with grain diameters of 6, 11, 16 and 26 nm. For single crystal models, four different shock directions are selected, <100>, <110>, <111> and <321>, and dislocation density behind the shock wave …

Ag Nano-Dendritic Three-Dimensional (3d) Surface-Enhanced Raman Scattering (Sers) Substrate For In-Situ Liquid Media Detection, Milind Mansing Pawar

Material Science and Engineering Theses - Archive

Continuous monitoring of certain environmental pollutants, biological species, chemical species, and explosives are of utmost importance in recent times. Surface-enhanced Raman scattering (SERS) provides most promising option as it is a highly sensitive technique which allows for ultrasensitive detection of molecules and provides excellent structural information. To obtain rich results through Surface-enhanced Raman scattering, proper design of enhancing substrate plays vital role. Contemporary SERS substrates don’t provide ease to detect liquid analytes for in-situ spectroscopy. Liquid media detection through SERS relies on highly statistical binding of analytes to SERS-sensitive hot spots. Moreover, it becomes extremely difficult to detect flowing liquid …

Optimization Of Reduced Graphene Oxide Deposition For Hydrogen Sensing Technologies, Matthew Pocta

Mechanical Engineering Undergraduate Honors Theses

Graphene is known to be a key material for improving the performance of hydrogen sensors. High electrical conductivity, maximum possible surface area with respect to volume, and high carrier mobility are a few of the properties that make graphene ideal for hydrogen sensing applications. The problem with utilizing graphene is the difficulty in depositing uniform, thin layers onto substrate surfaces. This study examines a new method of optimizing graphene deposition by utilizing an airbrush to deposit both graphene oxide (GO) and reduced graphene oxide (rGO) onto glass substrates. The number of depositions were varied among samples to study the effect …

Near-Field Thermal Radiation For Solar Thermophotovoltaics And High Temperature Thermal Logic And Memory Applications, Mahmoud Elzouka

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

This dissertation investigates Near-Field Thermal Radiation (NFTR) applied to MEMS-based concentrated solar thermophotovoltaics (STPV) energy conversion and thermal memory and logics. NFTR is the exchange of thermal radiation energy at nano/microscale; when separation between the hot and cold objects is less than dominant radiation wavelength (~1 μm). NFTR is particularly of interest to the above applications due to its high rate of energy transfer, exceeding the blackbody limit by orders of magnitude, and its strong dependence on separation gap size, surface nano/microstructure and material properties.

Concentrated STPV system converts solar radiation to electricity using heat as an intermediary through a …

Flux Focusing Axial Magnetic Gear, Robert J. Rutherford

Maseeh Summer Undergraduate Research Experience

Power transmission is traditionally achieved with a mechanical gear. These gears require maintenance, cause vibration, and have no overload protection. Magnetic gears (MGs) offer an innovative solution to these drawbacks as they do not require regular maintenance, have no need for lubrication, create very little acoustic noise, have built in overload protection and as a result of these advantages, have a longer lifetime of operation. The flux focusing axial magnetic gear (FFAMG) was assembled for future testing of power transmission, conversion, and generation applications.

Gears are used to transmit power by converting low speed-high torque rotary motion into high speed-low …

Design And Synthesis Of Polymer Brush Surfaces With Complex Molecular Architectures And Morphologies, Wei Guo

Dissertations

The combination of surface-initiated polymerization (SIP) and postpolymerization modification (PPM) is a powerful technique for the fabrication of functional soft surfaces. Better understanding the influence of the aforementioned factors on the PPM effectiveness is valuable for fulfilling the potential of the PPM approach for the fabrication of functional soft surfaces. Specifically, by carefully balancing modification reactivity and limitation of mass transport, polymer brush with composition heterogeneity and gradient along the normal direction of the surface otherwise unattainable by methods of direct polymerization can be fabricated via the PPM approach which opens doors to new routes to polymer brush with complex …

Effect Of Chain Rigidity On Network Architecture And Deformation Behavior Of Glassy Polymer Networks, Kyler Reser Knowles

Dissertations

Processing carbon fiber composite laminates creates molecular-level strains in the thermoset matrix upon curing and cooling which can lead to failures such as geometry deformations, micro-cracking, and other issues. It is known strain creation is attributed to the significant volume and physical state changes undergone by the polymer matrix throughout the curing process, though storage and relaxation of cure-induced strains remain poorly understood. This dissertation establishes two approaches to address the issue. The first establishes testing methods to simultaneously measure key volumetric properties of a carbon fiber composite laminate and its polymer matrix. The second approach considers the rigidity of …

Investigations Of Pld Grown Tungsten Oxide Thin Films, Anthony Thomas Pelton

Graduate Theses/Dissertations

Pulsed laser deposition (PLD) is a promising technique for creating inexpensive,nanostructured thin films which may lead to structures suitable for photocatalysis. During this study, multiple tungsten oxide thin films were prepared using two types of PLD techniques. The first method was conducted at US Photonics, Springfield, MO, using a femtosecond laser while the second method relied on use of an excimer (nanosecond) laser located at Missouri State University. Films were first deposited on glass using both methods at room temperature. Further study was conducted on thin films deposited on sapphire and silicon deposited at room temperatures and at elevated temperatures. …

Controlled Synthesis And Utilization Of Metal And Oxide Hybrid Nanoparticles, Cameron Cowgur Crane

Graduate Theses and Dissertations

This dissertation reports the development of synthetic methods concerning rationally-designed, hybrid, and multifunctional nanomaterials. These methods are based on a wet chemical, solution phase approach that utilizes the knowledge of synthetic organic and inorganic chemistry to generate building blocks in solution for the growth of nanocrystals and hybrid nanostructures. This work builds on the prior knowledge of shape-controlled synthesis of noble metal nanocrystals and expands into the challenging realm of the more reactive first row transition metals. Specifically, a microemulsion sol-gel method was developed to synthesize Au-SiO2 dimers as precursors for the synthesis of segmented heterostructures of noble metals that …

Synthesis Of Graphene Oxide Membranes And Their Behavior In Water And Isopropanol, Ashish Aher, Yuguang Cai, Mainak Majumder, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

Graphene oxide (GO) membrane has been synthesized on commercial polysulfone ultrafiltration membranes (Pore size: 17 nm) using the drop casting method followed by baking at 90 C for 24 h. Baking resulted in the reduction of GO and removal of bulk water intercalated in the GO sheets. Deposited GO film showed high stability under shear stress variation. This work shows that water adsorption on the GO membrane determines its permeation performance. Despite the higher viscosity of isopropyl alcohol (IPA), its permeability was 7 times higher than water through the baked (“dry”) GO membranes, which were never contacted with water. However, …

An Investigation Of The Use Of Cerium And Polyhedral Oligomeric Silsesquioxanes For The Protection Of Polymeric Epoxy Compounds In The Low Earth Orbit Environment, Jessica Miriam Piness

Dissertations

Low Earth orbit presents many hazards for composites including atomic oxygen, UV radiation, thermal cycling, micrometeoroids, and high energy protons. Atomic oxygen and vacuum ultraviolet radiation are of concern for space-bound polymeric materials as they degrade the polymers used as matrices for carbon fiber composites, which are used in satellites and space vehicles due to their high strength to weight ratios. Epoxy-amine thermosets comprise a common class of matrix due to processability and good thermal attributes. Polyhedral oligomeric silsesquioxanes (POSS) have shown the ability to reduce erosion in polyimides, polyurethanes, and other polymers when exposed to atomic oxygen. The POSS …

Formation Of Nanostructured Epoxy Networks Containing Polyhedral Oligomeric Silsesquioxane (Poss) And Silica Nanoparticles, Amit K. Sharma

Dissertations

This dissertation is focused on structure-property-processing relationship studies based on well-defined polyhedral oligomeric silsesquioxane (POSS) modified epoxy networks to present a comprehensive understanding of hybrid network behavior. In this research, a monoamine functional POSS molecule is incorporated into the epoxy monomer as pendant unit to mimic common epoxy structures and then crosslinked to form well-defined epoxy hybrid networks. The POSS cages behave as nanosized pendant unit in the epoxy matrices, while the mass fraction of POSS cages is varied and the effects on physical properties are examined with respect to changes in network architecture.

A novel continuous reactor method is …

Computational Modeling Of Electrical And Phonon Properties Of Skutterudites And Two-Dimensional Transition Metal Dichalcogenides, Izaak Gene Williamson

Boise State University Theses and Dissertations

This dissertation documents the computational modeling of skutterudite and two-dimensional transition metal dichalcogenide (2D TMD) materials for energy and electronic applications by analyzing the effects of materials doping and heterostructure formation on structural, energetic, electrical, phonon, and thermal properties. These topics remain largely unexplored and can accelerate materials development by providing insight on structure-properties-performance relationships.

Skutterudites are commonly studied for thermoelectric applications because they are low-cost, easy to process, and offer good intrinsic transport properties. They also exist as large, open structures which can be altered through filler atoms or substitutional dopants. A density functional theory (DFT)-based investigation of dopant …

Development Of Many-Body Potential For Deformation Study In Al-Tin Nanolayered Composites, Paul Yaohan Simanjuntak

Graduate Theses/Dissertations

A novel interatomic potential of ternary Al-Ti-N has been developed to study the deformation behavior of Al-TiN nanolaminates. The ternary nanolayered Al-TiN composite has attracted a lot of interest due to its combination of strength and ductility. The current analysis on the system has been primarily concentrated on continuum models which are inadequate to explain the key deformation events such as nucleation and interaction of dislocations. Progress in the preferred atomistic approach has been hampered however by the lack of available interatomic potential optimized for the ternary system. I developed a many-body potential based on embedded atomic model (EAM) by …

Experimental And Theoretical Study Of Vapor Phase Species Above Hot Rocky Exoplanet Analogues, Michal Bulak

Graduate Theses/Dissertations

With the James Webb Space Telescope and other space-based missions launching in the next few years, the astrophysics community awaits an exciting time. This work is an answer to a call for the laboratory contributions necessary to analyze the data of unprecedented accuracy. I performed a laboratory analysis of an analogue of a hot super earth atmosphere. This type of an extra solar planet has a rocky composition and has extremely high temperature (from 1500˚C – 5000˚C). I performed infrared spectroscopy on the gas phase vapor above a mixture of two binary systems: SiO2 with Al2O3 and CaO with SiO2. …

Development And Degradation Analysis Of Novel Micro And Nanostructured Transition Metal Oxide (Tmo) Anodes For Aqueous Sodium Ion Batteries., Santanu Mukherjee

Electronic Theses and Dissertations

One of the primary motivations driving battery technology research is the need to develop cleaner and more efficient energy storage systems. The portable electronics industry has developed exponentially, especially over the last couple of decades and therefore the importance of efficient electrochemical energy storage systems cannot be overstated. Li-ion batteries have been the predominant rechargeable energy in use, however, they have their own particular drawbacks viz. flammability of the electrolyte, expensive mining of the Li metal etc. This is where the importance of Na-ion batteries lie. This research focuses on using existing transition metal oxides (TMOs) and tuning their crystal …

Re-Evaluation Of Acceptance Testing Criteria For Structural Masonry Using The Prism Test Method, James Bristow

UNLV Theses, Dissertations, Professional Papers, and Capstones

The current acceptance criteria for structural masonry in accordance with International Building Code allows for the prism test method to be used. However, without a proper understanding of the effects of variable material properties such as individual masonry unit compressive strength and the various material moduli of elasticity, as well as the effect of field conditions on the unit’s performance, masonry prisms may “fail” to reach the design compressive strength (f’m).

By identifying causes of failure and evaluating the failure magnitude, it is concluded that when the masonry prism test method is utilized for acceptance testing of as-built masonry structures, …

High Early-Age Strength Concrete For Rapid Repair, Matthew O. Maler

UNLV Theses, Dissertations, Professional Papers, and Capstones

The aim of this research was to identify High Early-Age Strength (HES) concrete batch designs, and evaluate their suitability for use in the rapid repair of highways and bridge decks. To this end, two criteria needed to be met; a minimum compressive strength of 20.68 MPa (3000 psi) in no later than 12 hours, and a drying shrinkage of less than 0.06 % at 28 days after curing. The evaluations included both air-entrained, and non-air-entrained concretes.

The cement types chosen for this study included Type III and Type V Portland cement and “Rapid Set” − a Calcium Sulfoaluminate (CSA) cement. …

Polyisobutylene Telechelic Prepolymers By In Situ End-Quenching And Post-Polymerization Modifications, Bin Yang

Dissertations

This volume focuses on the development of telechelic polyisobutylene (PIB) prepolymers by combining end-capping of living carbocationic polymerization of isobutylene (IB) with suitable reactants and post-polymerization modifications. Alkylation kinetics of PIB tert-chloride with alkoxybenzenes using either TiCl₄ or AlCl₃ were investigated. Quantitative para-position end-capped products were only achieved if the alkoxybenzene/AlCl₃ molar ratio was greater than unity; while no such molar ratio is required for TiCl₄, but the alkylation rate was slower than AlCl₃ under the same conditions. Photopolymerization kinetics analysis of PIB triphenol tri(meth)acrylates with low and high M_ns, …

The Role Of Ceramic And Glass Science Research In Meeting Societal Challenges: Report From An Nsf-Sponsored Workshop, Katherine T. Faber, Tewodros Asefa, Monika Backhaus-Ricoult, Richard K. Brow, Julie Y. Chan, Shen Dillon, William Fahrenholtz, For Full List Of Authors, See Publisher's Website.

Materials Science and Engineering Faculty Research & Creative Works

Under the sponsorship of the U.S. National Science Foundation, a workshop on emerging research opportunities in ceramic and glass science was held in September 2016. Reported here are proceedings of the workshop. The report details eight challenges identified through workshop discussions: Ceramic processing: Programmable design and assembly; The defect genome: Understanding, characterizing, and predicting defects across time and length scales; Functionalizing defects for unprecedented properties; Ceramic flatlands: Defining structure-property relations in free-standing, supported, and confined two-dimensional ceramics; Ceramics in the extreme: Discovery and design strategies; Ceramics in the extreme: Behavior of multimaterial systems; Understanding and exploiting glasses and melts under …

Jet Bounce In Low Gravity, Caleb Turner

Maseeh Summer Undergraduate Research Experience

Liquid jets rebound (‘bounce’) from superhydrophobic surfaces when they impinge at oblique angles. We call this interesting phenomena ‘jet bounce’ and in this work we investigate the phenomena at large length scales in a reduced gravitational environment. For example, for water at Reynolds numbers 0 < Re < 3500 and surface normal Weber numbers 0 < We < 60 we characterize the response of the jets on the hydrophobic surface in the brief 2.1s micro-gravity environment achieved using a drop tower. It is observed that by varying jet velocity, flow rate, jet diameter, and incident angle we observe up to four distinct regimes of behavior. The various regimes may be targeted for specific applications and we demonstrate a variety of unique jet bounce behaviors for applications such as no-touch, no-contact fluid-thermal transport for spacecraft unit operations such as contaminated water processing, device cooling, and cryogenic fluids transport and management.

Stable jet bounce from small diameter jet ≈ 1 mm and low impact angle. Characterizing Reynolds number ≈ 900 and normal Weber number ≤ 10 allow jet bounce to rebound in non-destructive behavior.