Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 7261 - 7290 of 16792

Full-Text Articles in Materials Science and Engineering

Effects Of The Preheating Temperature On The Crystal Structure And Texture Of Martensitic Stainless Steel, Tri Hardi Priyanto, Rifai Muslih, Herry Mugirahardjo, Bharoto Bharoto, Andon Insani, Muzzakiy Muzzakiy Aug 2018

Effects Of The Preheating Temperature On The Crystal Structure And Texture Of Martensitic Stainless Steel, Tri Hardi Priyanto, Rifai Muslih, Herry Mugirahardjo, Bharoto Bharoto, Andon Insani, Muzzakiy Muzzakiy

Makara Journal of Technology

Theoretically, the preheating temperature refers to the start martensite temperature (Ms), and the martensite transformation can be considered as the conservation of the invariant habit-plane in the lattice structure. The habit-plane is the interface plane between austenite and martensite as measured on a macroscopic scale. From the calculation, Ms = 252 °C. The martensite formation can be affected by temperature or stress treatment. In this experiment, temperature treatment was conducted. The sample was treated at 250 °C ± 10 °C. Before and after the pre-heat treatment, the sample was characterized using the neutron diffraction method. BATAN’s Texture Diffractometer (DN2) with …

Go to article

Mapping Of Bruise Of Oil Palm Fresh Fruit Bunch During Loading And Transportation From Field To Mill, Andreas Wahyu Krisdiarto Aug 2018

Mapping Of Bruise Of Oil Palm Fresh Fruit Bunch During Loading And Transportation From Field To Mill, Andreas Wahyu Krisdiarto

Makara Journal of Technology

Fresh fruit bunches (FFBs) are used as raw materials for palm oil, and their transport from a field is a critical step to maintain their quality. Fruit integrity should be maintained so the mill can efficiently obtain palm oil with less than 5% free fatty acid content. Physical treatments for FFBs during loading to truck bins and transport may cause physical injuries. This research aimed to map fruit bruises. The map can be used as a basis in managing transport of FFBs. Physical injuries were assessed by bruise index (BI), which was calculated by measuring the bruise area and weight …

Go to article

Investigation Of Ship Hull Girder Strength With Grounding Damage, Muhammad Zubair Muis Alie, Ristiyanto Adiputra Aug 2018

Investigation Of Ship Hull Girder Strength With Grounding Damage, Muhammad Zubair Muis Alie, Ristiyanto Adiputra

Makara Journal of Technology

The objective of the present study is to investigate ship hull girder strength as a result of grounding damage upon longitudinal bending. A bulk carrier and tanker are analyzed and Smith’s Method is adopted and implemented in the analysis program. An efficient solution procedure is performed by assuming the cross-section remains plane and the vertical bending moment is applied to the cross section. As a fundamental case, the damage is simply created by removing the elements from the cross section. Welding residual stress, initial imperfections, and crack extensions are not considered. The grounding damage is made by two conditions, namely …

Go to article

Benchmarking Product Service System Of Generator Set Distributors, Venny Violetta Tiurindah, Tanika Dewi Sofianti Aug 2018

Benchmarking Product Service System Of Generator Set Distributors, Venny Violetta Tiurindah, Tanika Dewi Sofianti

Makara Journal of Technology

Power generation is an industry that is essential to sustain daily life and competes with generator set distributors. The product service system of distributors must be improved to survive the competition. This research aims to develop tools for benchmarking the product service system of generator set distributors. Benchmarking identifies gaps between a product and other competitors’ products. In this work, a product service system board is used to visualize the current product service system of a generator set distributor. A PPIAF framework and a SERVQUAL framework are adapted to assess product performance and service quality, respectively. AHP is used as …

Go to article

Nanoengineering Of Next Generation Silicone Rubber Materials For Extreme Applications, Monika Bleszynski Aug 2018

Nanoengineering Of Next Generation Silicone Rubber Materials For Extreme Applications, Monika Bleszynski

Electronic Theses and Dissertations

Silicone rubber materials are frequently used in extreme environments, including aviation, space, high voltage and other applications. In service, however, complex and difficult to predict damage mechanisms in the rubbers can occur which can lead to severe failures of essential infrastructural components. For example, Non-Ceramic Insulators (NCIs), which support some of the most critical high voltage lines in the world, regularly exhibit severe polymer aging due to environmental pollution, ultra-violet (UV) radiation, and dry band and corona arcing. Designing silicone rubbers to resist aging in these demanding environments is difficult and requires an interdisciplinary approach, including correctly assessing the actual …

Go to article

Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization And Mechanical Properties, Aubrey Woern, Dennis Byard, Robert B. Oakley, Matthew J. Fiedler, Samantha Snabes, Joshua M. Pearce Aug 2018

Fused Particle Fabrication 3-D Printing: Recycled Materials’ Optimization And Mechanical Properties, Aubrey Woern, Dennis Byard, Robert B. Oakley, Matthew J. Fiedler, Samantha Snabes, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Fused particle fabrication (FPF) (or fused granular fabrication (FGF)) has potential for increasing recycled polymers in 3-D printing. Here, the open source Gigabot X is used to develop a new method to optimize FPF/FGF for recycled materials. Virgin polylactic acid (PLA) pellets and prints were analyzed and were then compared to four recycled polymers including the two most popular printing materials (PLA and acrylonitrile butadiene styrene (ABS)) as well as the two most common waste plastics (polyethylene terephthalate (PET) and polypropylene (PP)). The size characteristics of the various materials were quantified using digital image processing. Then, power and nozzle velocity …

Go to article

Computational Study On The Cu-Rich Side Of Aluminum-Copper Phase Diagram, Khaled Ahmed Hirmas Aug 2018

Computational Study On The Cu-Rich Side Of Aluminum-Copper Phase Diagram, Khaled Ahmed Hirmas

Material Science and Engineering Dissertations - Archive

Cu-rich side of Al-Cu phase diagram has not been studied extensively as the Al-rich side. It is well established that a one-phase (a phase) exists at 300oC between the 82% Cu and pure Cu, and at the eutectic temperature (1032oC) between 86% Cu and pure Cu, a phase, when quenched from above 600oC and subjected to annealing below about 300oC, or deformation, show ordering effects in resistivity, heat capacity, diffuse X-ray, microstructure, and in mechanical properties. This has been studied to determine whether these effects are due to short-range or long-range ordered domain [1]. The present computational study is to …

Go to article

Achieving Novel Functionalities In Semiconductor-Crystalline Oxide Heterostructures Through Electrical And Structural Coupling, Kamyar Ahmadi-Majlan Aug 2018

Achieving Novel Functionalities In Semiconductor-Crystalline Oxide Heterostructures Through Electrical And Structural Coupling, Kamyar Ahmadi-Majlan

Material Science and Engineering Dissertations - Archive

Creating new materials that exhibit enhanced or novel behaviors is essential to meet the technological challenges we face today. Complex oxides are perfect candidates to overcome these challenges due to the range of electronic, optical, and ionic properties they exhibit. The research presented here, mainly focuses on overcoming two important challenges in oxide electronics. First,the ability of epitaxially growing multifunctional oxides on conventional semiconductor substrates and second, the successful integration of multifunctional oxide properties on semiconductors Oxide molecular beam epitaxy was utilized to grow transition metal oxides with unprecedented control, layer-by-layer, at the atomic scale. Such control of growth enables …

Go to article

An Investigation Of The Plasma Electrolytic Oxidation Mechanism For Coating Of Alumina-Zirconia Nanocomposite, Nastaran Barati Aug 2018

An Investigation Of The Plasma Electrolytic Oxidation Mechanism For Coating Of Alumina-Zirconia Nanocomposite, Nastaran Barati

Material Science and Engineering Dissertations - Archive

Plasma Electrolytic Oxidation (PEO) is an electrochemical surface modification technique which is able to coat ceramic coatings on valve metals from either cationic or anionic species in an aqueous electrolyte. Applying high voltage in the range of 300-600 V is required to achieve crystalline phases. PEO is a clean technology which offers several benefits including high deposition rates, excellent adhesion strength and mechanical properties. One of the interesting capabilities of the PEO process is its ability to form composite coatings. The following work aims to study the growth mechanism of nanocomposite layers coated by PEO. Two experimental routs have been …

Go to article

Spectral-Domain Phase-Sensitive Interferometry For Real-Time Probing Of Electrodeposition Processes, Yujen Chiu Aug 2018

Spectral-Domain Phase-Sensitive Interferometry For Real-Time Probing Of Electrodeposition Processes, Yujen Chiu

Material Science and Engineering Dissertations - Archive

Electrodeposition is a simple, versatile and scalable method for depositing thin metal films on conductive substrates, and it has long been used in large-scale industrial processes for metal film coating. In the last two decades, electrodeposition has entered into the manufacturing processes of electronic devices. Electrodeposition of Cu has become the standard process for the backend processes for almost all microelectronic devices. Electrodeposition of Cu and magnetic materials are used in the fabrication of write/read head in computer hard disk drive. More recently, a unique electrodeposition process, under potential deposition (UPD), has been utilized for atomic layer deposition to generate …

Go to article

Investigation Of Surface Contamination In A Cu-Based Al Alloy Occurring During Tem Sample Preparation, Kelly Claunch Aug 2018

Investigation Of Surface Contamination In A Cu-Based Al Alloy Occurring During Tem Sample Preparation, Kelly Claunch

Material Science and Engineering Theses - Archive

This thesis investigates the nature of surface contamination originating from the jet-polishing process on Cu-6 wt% Al TEM disks. During previous TEM imaging and diffraction analysis performed by our group, surface contamination particles, roughly 15-60 nm in diameter, were observed on the surface of the jet-polished TEM disks. Further, TEM diffraction analysis revealed that the contamination particles were growing epitaxially on the Cu matrix. HR-SEM was used to characterize the surface contamination in terms of shape, size, composition, and distribution on the surface of the disks. Through extensive HR-SEM imaging, it was found that surface contamination particles are present on …

Go to article

New Methods For Understanding And Controlling The Self-Assembly Of Reacting Systems Using Coarse-Grained Molecular Dynamics, Stephen Thomas Aug 2018

New Methods For Understanding And Controlling The Self-Assembly Of Reacting Systems Using Coarse-Grained Molecular Dynamics, Stephen Thomas

Boise State University Theses and Dissertations

This research aims at developing new computational methods to understand the molecular self-assembly of reacting systems whose complex structures depend on the thermodynamics of mixing, reaction kinetics, and diffusion kinetics. The specific reacting system examined in this study is epoxy, cured with linear chain thermoplastic tougheners whose complex microstructure is known from experiments to affect mechanical properties and to be sensitive to processing conditions. Mesoscale simulation techniques have helped to bridge the length and time scales needed to predict the microstructures of cured epoxies, but the prohibitive computational cost of simulating experimentally relevant system sizes has limited their impact. In …

Go to article

Incorporation Of Silica Nanoparticles Into The Underlayer Of Pda/Ptfe Thin Coatings, Adedoyin Abe Aug 2018

Incorporation Of Silica Nanoparticles Into The Underlayer Of Pda/Ptfe Thin Coatings, Adedoyin Abe

Mechanical Engineering Undergraduate Honors Theses

Polytetrafluoroethylene (PTFE) is one of the most low friction and corrosion resistant solid lubricants. Prior studies have shown that a polydopamine (PDA) underlayer enhances the durability of PTFE thin coating. In this study, 100, 200, and 300 µL of aqueous silica nanoparticle (NP) solutions were added to the PDA deposition solution. The durability and coefficient of friction of PDA/PTFE thin coatings on stainless steel substrates are investigated with and without incorporating the silica NPs. The coatings were tested in dry contact conditions using a Universal Mechanical Tester (UMT) with a ball-on-flat configuration in a reciprocating motion. It was found that …

Go to article

The Effects Of Atmospheric Heat Treatments On Tio2 Nanotube Anodes For Lithium-Ion Batteries, Andreas Savva Aug 2018

The Effects Of Atmospheric Heat Treatments On Tio2 Nanotube Anodes For Lithium-Ion Batteries, Andreas Savva

Boise State University Theses and Dissertations

The effects of various heat treatments on the physical and electrochemical properties of anatase TiO2 nanotubes were studied in this work. Well-ordered TiO2 nanotubes were grown via electrochemical anodization and annealed at 450°C to induce a phase transformation to anatase. The heat treatments were conducted under atmospheres of O2, Ar, N2, and water vapor (WV) to create different point defects. The oxygen-deficient atmospheres were used to generate oxygen vacancies in the TiO2 nanotubes, while the water vapor treatment was used to create Ti vacancies by stabilizing them via the protonation of O sites. …

Go to article

Irradiation Effects On Titanium Dioxide Electrodes For Lithium Ion Batteries, Kassiopeia Ann Smith Aug 2018

Irradiation Effects On Titanium Dioxide Electrodes For Lithium Ion Batteries, Kassiopeia Ann Smith

Boise State University Theses and Dissertations

This dissertation presents the mechanisms of irradiation induced defects and the resulting electrochemical response of TiO2 anode for ­lithium-ion-batteries. The objective is to realize pathways by which irradiation could be used to enhance the energy density of rechargeable lithium ion batteries in order to provide power to applications under extreme environments. Recent studies suggest that the presence of structural defects (e.g. vacancies and interstitials) in metal oxides may enhance the electrochemical charge storage capacity in electrode materials. One approach to induce defect formation in electrode materials is to use ion irradiation, which has been proven to produce point …

Go to article

Improving And Augmenting The Anm Model For Three-Dimensional Virtual Concrete, Stephen Thomas Aug 2018

Improving And Augmenting The Anm Model For Three-Dimensional Virtual Concrete, Stephen Thomas

Boise State University Theses and Dissertations

The Anm model used for creating virtual concrete consisting of irregular shapes has been improved by integrating two existing algorithms: the extent overlap box (EOB) method for detecting contact between two irregular shapes and the uniform thickness shell algorithm. The EOB method has been compared with the previously used Newton-Raphson method and shown to be able to detect inter-particle contact with better accuracy and with less computational cost. Two parameters that define the balance between accuracy and performance of the EOB method have been identified and studied. The uniform thickness shell has been used to specify the minimum inter-particle distance …

Go to article

Application Of Nano-Plasmonics For Sers Bio-Detection And Photocatalysis In The Same Platform, Muhammad R. Shattique Aug 2018

Application Of Nano-Plasmonics For Sers Bio-Detection And Photocatalysis In The Same Platform, Muhammad R. Shattique

Graduate Theses/Dissertations

Nano-biological systems interfacing nano-structured solid surfaces with biological compounds such as oligonucleotides or proteins are highly regarded as enabling materials for biosensing and biocatalysis applications. In particular, nanostructures of noble metals such as gold or silver, when exposed to light, exhibit a phenomenon known as surface plasmon resonance. When a proper metal nanostructure (plasmonic substrate) is exposed to light, very efficient absorption of incoming photons is possible, resulting in a buildup of localized high-energy regions, or “hot-spots”, where energetic carriers or “hot carriers” can be created. These hot-carriers can be used to catalyze desired chemical transformations in materials located nearby. …

Go to article

Investigations On Hydrothermally Synthesized Co3o4/Mnxco3-Xo4 Core-Shell Nanoparticles, Ning Bian Aug 2018

Investigations On Hydrothermally Synthesized Co3o4/Mnxco3-Xo4 Core-Shell Nanoparticles, Ning Bian

Graduate Theses/Dissertations

Two different morphologies (pseudo-spherical shaped or PS type and hexagonal nanoplate shaped or NP type) and two different concentrations (0.07 M and 0.1 M) of manganese incorporated Co3O4@MnxCo3-xO4 core-shell nanoparticles (CSNs) were investigated, respectively. The motivation of this work is to investigate the magnetic properties of, and specifically the exchange bias, between different shaped CSNs and between different Mn-doped CSNs. A two-step synthesis method was utilized to obtain the CSNs: a soft chemical approach was used to obtain Co3O4 nanoparticles and a hydrothermal nano-phase epitaxy was used to …

Go to article

High Dynamic Range Optical Devices And Applications., Elijah Robert Jensen Aug 2018

High Dynamic Range Optical Devices And Applications., Elijah Robert Jensen

Electronic Theses and Dissertations

Much of what we know about fundamental physical law and the universe derives from observations and measurements using optical methods. The passive use of the electromagnetic spectrum can be the best way of studying physical phenomenon in general with minimal disturbance of the system in the process. While for many applications ambient visible light is sufficient, light outside of the visible range may convey more information. The signals of interest are also often a small fraction of the background, and their changes occur on time scales so quickly that they are visually imperceptible. This thesis reports techniques and technologies developed …

Go to article

Design Survey Of Laminated Composite I-Beam, Mrinmoy Saha Aug 2018

Design Survey Of Laminated Composite I-Beam, Mrinmoy Saha

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Composite I-beams are popular for high-strength low-weight applications. Learning the macro-mechanics and designing the composite I-beam properly are necessary. In this report, a design overview of the composite I-beam is discussed which is based on classical lamination theory where it includes the homogenization approach, the plane stress assumption and the Kirchhoff hypothesis. Using these assumptions, a method was developed to come up with the effective material properties of a beam. Formulas to calculate maximum deflection and maximum bending stress and shear stress and the stress concentration at the connection of web-flange are discussed which describe ways for designing and manufacturing …

Go to article

Microstructure And Mechanical Properties Of Selective Laser Melted Superalloy Inconel 625., Md Ashabul Anam Aug 2018

Microstructure And Mechanical Properties Of Selective Laser Melted Superalloy Inconel 625., Md Ashabul Anam

Electronic Theses and Dissertations

Selective Laser Melting (SLM), a powder based Additive Manufacturing (AM) process, has gained considerable attention in the aerospace, biomedical and automotive industries due to its many potential benefits, such as, capability of fabricating complex three-dimensional components, shortened design to product time, reduction in process steps, component mass reduction and material flexibility. This process uses metallic powder and is capable of fabricating complex structures with excellent microstructure which make SLM not only an improvement over other manufacturing processes but also innovative material processing technology. Inconel 625, a nickel-based super alloy is widely popular in aerospace, chemical and nuclear industries. This alloy …

Go to article

Modeling And Validations Of Control Parameters For Material Extrusion-Based Additive Manufacturing Of Thixotropic Aluminum Alloys., Lars Herhold Aug 2018

Modeling And Validations Of Control Parameters For Material Extrusion-Based Additive Manufacturing Of Thixotropic Aluminum Alloys., Lars Herhold

Electronic Theses and Dissertations

Additive Manufacturing (AM) with metals has been accomplished mainly through powder bed fusion processes. Initial experiments and simulations using Material Extrusion Additive Manufacturing (MEAM) have been performed by various researchers especially using low melting alloys. Recently Stratasys Inc. submitted a patent application for the use of their Material Extrusion technology also called Fused Deposition Modeling (FDM) where they describe the process using thixotropic semi-solid alloys. Currently this process using semi-solid, engineering type alloys such as A356 or THIXALLOY 540 aluminum have not been researched to evaluate the control parameters. This research combines the in-depth knowledge of applying thixotropic semi-solid aluminum …

Go to article

Electrocatalytic Properties Of Ni-Fe Basedalloys Toward Oxygen Evolution Reaction, Xiaodan Cui Jul 2018

Electrocatalytic Properties Of Ni-Fe Basedalloys Toward Oxygen Evolution Reaction, Xiaodan Cui

LSU Doctoral Dissertations

In this dissertation, laser-based manufacturing was applied to develop NiFe-based alloys, with focus on their electrochemical characteristics toward oxygen evolution reaction during water electrocatalysis. The targeted electrocatalysts were designed by combining catalysis principles of absorption energy, electronic effect and geometry effect. Firstly, a one-step laser-based manufacturing method was applied to prepare a thin layer of NiFe-based electrodes with varied Ni to Fe ratios to replace high-cost noble metals as the electrocatalyst for oxygen evolution reaction (OER). Since each Ni has 0.6 d-vacancy and each Fe atom has 2.2 d-vacancies. The alloying of Ni-Fe allows electrons flowing from Ni to Fe, …

Go to article

Damage Simulation Of Pre-Forming V-Neck Plates With Variations In Material Type, Time And Temperature Using The Taguchi Method, Avita Ayu Permanasari, Rr. Poppy Puspitasari, Kevin Valiant Cahya, Mahfud Ihsan Jul 2018

Damage Simulation Of Pre-Forming V-Neck Plates With Variations In Material Type, Time And Temperature Using The Taguchi Method, Avita Ayu Permanasari, Rr. Poppy Puspitasari, Kevin Valiant Cahya, Mahfud Ihsan

Journal of Mechanical Engineering Science and Technology (JMEST)

In metal forming, damage can be caused by several factors: load on the workpiece, initial heating temperature, and temperature due to the friction between the die and the material for pre-forming. The metal forming process can be executed in 2 ways, namely by hot working and cold working. During these two types of mechanical working process, the metal undergoes plastic deformation. In hot working, the required deformation force is relatively low, and changes in mechanical properties are also insignificant. In cold working, a higher force is required, but the strength of the metal will increase significantly. The use of simulation …

Go to article

Mechanical Properties And Permeability Of Sand Casting Moulds With Eggshells Binder, Maryam Sharifi Jebeli Sharifi Jebeli, Wahyu Kurnianto, Wahono Wahono Jul 2018

Mechanical Properties And Permeability Of Sand Casting Moulds With Eggshells Binder, Maryam Sharifi Jebeli Sharifi Jebeli, Wahyu Kurnianto, Wahono Wahono

Journal of Mechanical Engineering Science and Technology (JMEST)

This research aimed to analyse whether or not eggshell could be a potential addition to sand mould composition as a binding material together with bentonite. Different amounts of eggshell material, i.e. 4%, 7%, 10% and 3%, were added to each sample. This study was a type of pre-experimental design called the one-shot case study. Among all sand moulds under study, sample 3 10% ES in dry conditions had the highest tensile, compressive and shear strengths of 0.09 Kg/cm2, 3.11 Kg/cm2 and 1.13 Kg/cm2, respectively. The results of the permeability test with heat treatment at 110˚C for 60 minutes showed that …

Go to article

Effect Of Mnfe2o4 Nanoparticles To Reduce Co And Hc Levels On Vehicle Exhaust Gas Emissions, Poppy Puspitasari, Sukarni Sukarni, Amir Hamzah Jul 2018

Effect Of Mnfe2o4 Nanoparticles To Reduce Co And Hc Levels On Vehicle Exhaust Gas Emissions, Poppy Puspitasari, Sukarni Sukarni, Amir Hamzah

Journal of Mechanical Engineering Science and Technology (JMEST)

The air pollution particle emitted from transportation in Indonesia Bay 2015 consist of 70.50% CO; 18.34% HC; 8.89% NOx; 0.88% SOx; 1.33%. These gases are very harmful to humans. To reduce the toxic gas effect, special treatment is needed, one of them is by applying catalyst on exhaust system. MnFe2O4 has the potential to bind the CO and HC elements contained in the exhaust gas. This study aims to investigate the effect of MnFe2O4 addition on catalityc converter towards CO gas and HC emissions of motor vehicles. Therefore, the percentage of exhaust reduction with and without applying MnFe2O4 on varied …

Go to article

The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin Jul 2018

The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin

Journal of Mechanical Engineering Science and Technology (JMEST)

Electric arc welding with covered electrodes is ideally suited for flat plates. If this technique is employed for welding rigid bodies, the results would be of poor quality. One viable solution to weld rigid bodies is through friction welding. The study aimed to investigate the tensile strength of specimens subjected to friction welding with variations in rotational speed, friction time, and pressure and to examine the microstructure of friction welding joints. This research used the one-shot case study design and involved descriptive analysis. The descriptive analysis described the results of tensile testing and microstructure of welding joints. Results showed that …

Go to article

Pine Flower Waste Innovation As A Plant Based Program Augmented Reality, Ayik Bela Saputra, Imam Muhtarom, Ni’Matul Rochmaniyah, Ardhana Iswari Citra Padmi, Ika Rahmawati Jul 2018

Pine Flower Waste Innovation As A Plant Based Program Augmented Reality, Ayik Bela Saputra, Imam Muhtarom, Ni’Matul Rochmaniyah, Ardhana Iswari Citra Padmi, Ika Rahmawati

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia one of the tropical countries in the world can not be separated from environment problems like other developing countries. One of the causes of declining environment quality is the decline of forests in Indonesia. In 2009, Indonesia’s forest area was by more than half, to about 88 million hectares. By the year 2013 the number is about 82 million hectares. One of the efforts to promote environment education is to familiarize planting plants to children from an early age from the school environment to the family environment. Therefore it is necessary an alternative in the form of planting media …

Go to article

Properties Of Cassava Starch Based Bioplastic Reinforced By Nanoclay, Nanang Eko Wahyuningtiyas, Heru Suryanto Jul 2018

Properties Of Cassava Starch Based Bioplastic Reinforced By Nanoclay, Nanang Eko Wahyuningtiyas, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Synthetic Synthetic plastic is chemical materials which cause severe environmental problems. Incinerating plastic waste leads to release of hazardous gases, which is not good for humans. Bioplastic can help reduce the dependence on fossil fuels and petroleum, that bioplastic can solve the problem of synthetic plastic use. This research aims to define the properties of the cassava starch-based bioplastic reinforced by nanoclay. Methods were experimental with bioplastic component of cassava starch, glycerol as plasticizer and nanoclay as reinforcement. The bioplastic was analyzed using XRD, tensile test, moisture absorption, biodegradability, and compared with another bioplastic. The results show that the addition …

Go to article

59th Annual Rocky Mountain Conference On Magnetic Resonance Jul 2018

59th Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 59th annual meeting of the Rocky Mountain Conference on Magnetic Resonance, co-endorsed by the Colorado Section of the American Chemical Society and the Society for Applied Spectroscopy. Held in Snowbird, Utah, July 22-27, 2018.

Go to article

First Prev Next Last