Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 7141 - 7170 of 16793

Full-Text Articles in Materials Science and Engineering

Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, Ahmet Ozkan Ozer, Emma J. Moore Nov 2018

Creating A Computational Tool To Simulate Vibration Control For Piezoelectric Devices, Ahmet Ozkan Ozer, Emma J. Moore

Posters-at-the-Capitol

Piezoelectric materials have the unique ability to convert electrical energy to mechanical vibrations and vice versa. This project takes a stab to develop a reliable computational tool to simulate the vibration control of a novel “partial differential equation” model for a piezoelectric device, which is designed by integrating electric conducting piezoelectric layers constraining a viscoelastic layer to provide an active and lightweight intelligent structure. Controlling unwanted vibrations on piezoelectric devices (or harvesting energy from ambient vibrations) through piezoelectric layers has been the major focus in cutting-edge engineering applications such as ultrasonic welders and inchworms. The corresponding mathematical models for piezoelectric …


Controlled Nanomorphology Of Hybrid Organic/Inorganic Multi-Component Composites Through Cooperative Non-Covalent Interactions, Lingyao Meng Nov 2018

Controlled Nanomorphology Of Hybrid Organic/Inorganic Multi-Component Composites Through Cooperative Non-Covalent Interactions, Lingyao Meng

Shared Knowledge Conference

Hybrid organic–inorganic nanocomposite polymers, with inorganic nanoparticles embedded in organic matrix have emerged as a special category of multifunctional materials. With rational materials design, these hybrids can show the synergistic effect of the properties from both phases. Homogenous dispersion and orderly arrangement of the organic and inorganic components are key in their functionalities. By controlling the interface and corresponding interfacial interactions between the organic and inorganic entities, we have developed a logical approach to form stable and controlled hybrid nanofiber structures. We demonstrate the formation of hybrid polymer/quantum dots (or iron oxide nanoparticles) nanocomposites through non-covalent interactions (hydrogen bonding, ionic …


Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra, Shreya Vemuganti Nov 2018

Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra, Shreya Vemuganti

Shared Knowledge Conference

Ultrasonic monitoring in cementitious materials is challenging due to the high degree of attenuation. In wellbore environments, monitoring becomes more challenging due to inaccessibility. Meta materials, also known as acoustic bandgap materials, exhibit an interesting feature of forbidding the propagation of elastic/sound waves and isolate vibration in a certain frequency band. Traditionally, acoustic bandgap materials are developed with inclusions such as tin, aluminum, gold, steel in a polymer matrix. In this study, we present the development of three-dimensional cementitious sensors capable of exhibiting stopbands in the acoustic transmission spectra using carbon nanotubes. Relatively wide stopbands were engineered using Floquet-Bloch periodic …


Achieving High Catalytic Activity And Redox Stability Of Doped Ceria Through A Novel Sol Gel Synthesis, Christopher Riley Nov 2018

Achieving High Catalytic Activity And Redox Stability Of Doped Ceria Through A Novel Sol Gel Synthesis, Christopher Riley

Shared Knowledge Conference

Ceria is widely studied in catalysis because of its high oxygen mobility and storage capacity. These properties are enhanced by the incorporation of dopant atoms into the ceria crystal structure. However, creating a homogenously doped structure requires a suitable synthesis technique. Otherwise, dopant atoms form an oxide phase on the ceria surface, which blocks highly active catalytic sites. Traditional production methods allow for cerium and dopant ions to segregate during synthesis. In this work, we demonstrate a novel sol gel synthesis method for producing homogeneously doped ceria. The method is easy and avoids the use of hazardous chemicals. Higher dopant …


Two-Dimensional Layered Materials (Graphene-Mos2) Nanocatalysts For Hydrogen Production, Jacob Dobler, Taylor Robinson, Sanju Gupta 7455940 Nov 2018

Two-Dimensional Layered Materials (Graphene-Mos2) Nanocatalysts For Hydrogen Production, Jacob Dobler, Taylor Robinson, Sanju Gupta 7455940

Posters-at-the-Capitol

Recent development of two-dimensional layered materials including graphene-family and related nanomaterials have arisen as potential game changer for energy, water and sensing applications. While graphene is a form of carbon arranged hexagonally within atomic thin sheet, MoS2 is becoming a popular, efficient, and cost-effective catalyst for electrochemical energy devices, in contrast to expensive platinum and palladium catalysts. In this work, we electrochemically desulfurize few-layer molybdenum disulfide (MoS2) and aerogels with reduced graphene oxide (rGO) prepared under hydrothermal conditions ((P< 20 bar, T< 200 oC), for improving hydrogen evolution reaction (HER) activity via point defects (S-vacancy). Moreover, the interactions between rGO …


On The Detection Of Carbon Fibre Storage Contamination And Its Effect On The Fibre-Matrix Interface, Quanxiang Li, Andrea L Woodhead, Jeffrey S Church, Minoo Naebe Nov 2018

On The Detection Of Carbon Fibre Storage Contamination And Its Effect On The Fibre-Matrix Interface, Quanxiang Li, Andrea L Woodhead, Jeffrey S Church, Minoo Naebe

Research outputs 2014 to 2021

Contamination caused by inappropriate carbon fibre (CF) storage may have an impact on their end use in reinforced composite materials. Due to the chemical complexity of CFs it is not easy to detect potential contaminants, especially at the early stage during manufacturing and handling. In this paper, X-ray Photoelectron Spectroscopy (XPS), Fourier Transform Infrared (FTIR) spectroscopy and Surface Energy Analysis (IGC-SEA) were used to assess the surfaces of CFs stored in polyolefin zip-lock bags for possible contamination. Only after over 2 months in-bag storage, was XPS capable of detecting a minor increase in nitrogen on the CF surface while FTIR …


A Systematic Investigation Of Condensation Heat Transfer Using Asymmetric Micro-Scale Surfaces, Emily Brown Nov 2018

A Systematic Investigation Of Condensation Heat Transfer Using Asymmetric Micro-Scale Surfaces, Emily Brown

LSU Master's Theses

Asymmetric surfaces been shown to inducing unidirectional motion in the Leidenfrost regime; however, very minimal research has been conducted to investigate whether these surface can enhance condensation through the same means. The investigation of heat transfer of ratchets in condensation is a relatively untapped area of study, specifically ratchets with superhydrophobic properties. Anticipated difficulty lies in creating surfaces features or coatings that retain the ratchets and can adequately sustain optimal wetting state of Cassie-Baxter required to improve heat transfer performance during condensation. This study serves to investigate whether ratchets are a feasible surface feature to enhance condensation heat transfer. First, …


Novel Design And Synthesis Of Composite Nanomaterials For Lithium And Multivalent Ion Batteries, Wangwang Xu Nov 2018

Novel Design And Synthesis Of Composite Nanomaterials For Lithium And Multivalent Ion Batteries, Wangwang Xu

LSU Doctoral Dissertations

Nowadays, the fast-increasing energy demand for efficient, sustainable and environmentally-friendly energy storage devices remains a significant and challenging issue. Lithium ion batteries (LIBs) have been widely used as commercial energy devices in portable electronics and also shown great promise in upcoming large-scale applications due to their advantages of environmental safety, efficiency in energy delivering and light weight. However, due to their limited capacity, energy densities and cycle ability, LIBs still need further improvement to expand their applications to a larger field, especially electric vehicle (EVs) and hybrid electric vehicles (HEVs), in which energy storage devices with large capacity and high …


First-Principles Study Of The Products Of Co2 Dissociation On Nickel-Based Alloys: Trends In Energetics With Alloying Element, Lynza H. Sprowl, Benjamin Adam, Julie D. Tucker, Líney Árnadóttir Nov 2018

First-Principles Study Of The Products Of Co2 Dissociation On Nickel-Based Alloys: Trends In Energetics With Alloying Element, Lynza H. Sprowl, Benjamin Adam, Julie D. Tucker, Líney Árnadóttir

Mechanical and Materials Engineering Faculty Publications and Presentations

Oxidation and corrosion of nickel and Ni-based alloys are a problem for many industrial applications, such as power plants that use supercritical CO2 as the working fluid. In supercritical CO2 environments, CO2 dissociates on the surface forming adsorbed CO and O, which can oxidize the surface. The adsorbed CO can further breakdown via direct CO dissociation or via the Boudouard reaction to form adsorbed C, which can in turn carburize the surface. Understanding how the adsorbed species interact with different Ni-based alloys can help guide the design of future alloys. The interactions of adsorbed O, C, and CO on the …


Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla Nov 2018

Self-Healing Microcapsules As Concrete Aggregates For Corrosion Inhibition In Reinforced Concrete, Homero Castaneda, Marwa Hassan, Miladin Radovic, Jose Milla

Publications

Reinforced Concrete (RC) structures are vital to the US’s civil infrastructure for their strength and versatility. Unfortunately, RC elements deteriorate rapidly when exposed to corrosive environments. One possible solution is to extend the life of RC elements and systems using microencapsulated corrosion inhibitors to reduce the rebar corrosion rate. The capsules house an anodic corrosion inhibitor agent including calcium nitrate (CN) and triethanolamine (TEA). The integration of such microencapsulated materials will enhance the durability and extend the useful life by controlling the corrosion precursors and the corrosion process during damage evolution. Therefore, this work aims to develop and characterize the …


Recent Advances In Continuous Models Of Electrochemical Supercapacitors, Hao-Tian Lu, Jing-Hong Zhou, Guang-Hua Ye, Xing-Gui Zhou Oct 2018

Recent Advances In Continuous Models Of Electrochemical Supercapacitors, Hao-Tian Lu, Jing-Hong Zhou, Guang-Hua Ye, Xing-Gui Zhou

Journal of Electrochemistry

Electrochemical capacitors (supercapacitors) have been developed as a new type of energy storage device with high energy and power densities, which have the advantages of both fast charging-discharging as traditional capacitors and high energy density as batteries. Notable improvements in their electrochemical performance have been achieved in recent years owing to the recent advances in understanding of charge storage mechanisms and the development of advanced nanostructured materials. Recently, modeling and simulation of these supercapacitors has been applied as a useful approach to better understand the working mechanisms of the supercapacitors by describing the concentrations and electric fields inside the capacitors. …


Recent Advances In Non-Noble Metal Nanomaterials For Oxygen Evolution Electrocatalysis, Dan-Dan Zhao, Nan Zhang, Ling-Zheng Bu, Qi Shao, Xiao-Qing Huang Oct 2018

Recent Advances In Non-Noble Metal Nanomaterials For Oxygen Evolution Electrocatalysis, Dan-Dan Zhao, Nan Zhang, Ling-Zheng Bu, Qi Shao, Xiao-Qing Huang

Journal of Electrochemistry

Hydrogen is a kind of renewable energies with the merits of environmentally friendly, abundance and high weight energy density, which can replace the fossil energy. The electrolysis of water is regarded as the most effective way to generate hydrogen. Owing to the sluggish kinetics and large overpotential of the anode oxygen evolution reaction (OER), the efficiency of the cathode hydrogen evolution reaction is greatly limited. Therefore, it is highly desirable to explore efficient, stable and low cost electrocatalysts to reduce the overpotential of OER and improve the efficiency of hydrogen evolution. Based on the natural characteristics of non-noble metal catalysts …


Synthesis Of Keggin Polyoxometalates Modified Carbon Paste Electrode As A Sensor For Dopamine Detection, Peng-Fei Dong, Na Li, Hai-Yan Zhao, Min Cui, Cong Zhang, Ju-Jie Ren, Xue-Ping Ji Oct 2018

Synthesis Of Keggin Polyoxometalates Modified Carbon Paste Electrode As A Sensor For Dopamine Detection, Peng-Fei Dong, Na Li, Hai-Yan Zhao, Min Cui, Cong Zhang, Ju-Jie Ren, Xue-Ping Ji

Journal of Electrochemistry

Polyoxometalates, a class of anionic clusters with structure diversity and size variability, make them very attractive in many fields such as electrochemistry, catalysis and medicine. The Co(C15N6H12)2[PW12O38]·5H2O(Co[PW12O38]) modified carbon paste electrode was prepared in this work, and its electrochemical performances as the sensor for dopamine detection were characterized with electrochemical impedance spectroscopy, cyclic voltammetry and differential pulse voltammetry. The preparation conditions and test conditions were optimized respectively. Under the optimized conditions, the POMs modified carbon paste electrode exhibited good selectivity and sensitivity …


Effects Of Sulfur-Containing Additive On Low Temperature Performance Of Graphite Anode, Ze-Li Wu, Ye-Zhen Zheng, Zhong-Ru Zhang, Yong Yang Oct 2018

Effects Of Sulfur-Containing Additive On Low Temperature Performance Of Graphite Anode, Ze-Li Wu, Ye-Zhen Zheng, Zhong-Ru Zhang, Yong Yang

Journal of Electrochemistry

The low temperature performance of lithium ion battery mainly depends on the graphite anode, and one of the research focuses is to improve the low temperature performance of the anode by additives. In this paper, the effects of different sulfur-containing functional groups such as DTD (ethylene sulfate), 1,3-PS (1,3-propane sultone) and ES (ethylene sulfite) on low temperature performances of artificial graphite materials were systematically studied. The results in density functional theory (DFT) calculations, cyclic voltammetry (CV), scanning electron microscopy (SEM) and charge-discharge measurement clearly demonstrated that all three sulfur-containing additives could participate in formation of films on the surface of …


Electrodeposition Of Cobalt From Eutectic-Based Ionic Liquid, Rostom Ali M., Sankar Saha S, Ziaur Rahman Md Oct 2018

Electrodeposition Of Cobalt From Eutectic-Based Ionic Liquid, Rostom Ali M., Sankar Saha S, Ziaur Rahman Md

Journal of Electrochemistry

The electrodeposition of cobalt from a solution containing cobalt chloride in either a urea-choline chloride based or an ethylene glycol (EG)-choline chloride based ionic liquid has been carried out onto copper and steel cathodes by constant current and constant potential methods at different temperatures. The influences of various experimental conditions on electrodeposition and morphology of the deposited layers have been investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD)technique. It has been shown that the smooth, shiny with good adherence and bright metallic coloured cobalt coatings were obtained from both urea and EG based ionic liquids at the applied …


Recent Progress In Organic Redox Flow Batteries, Li-Xing Xia, Hao Liu, Lin Liu, Zhan-Ao Tan Oct 2018

Recent Progress In Organic Redox Flow Batteries, Li-Xing Xia, Hao Liu, Lin Liu, Zhan-Ao Tan

Journal of Electrochemistry

Redox flow batteries (RFBs) are promising candidate for balancing instability of grids caused by integration of intermittent renewable energies such as solar energy and wind energy. Along with wide deployments in solar energy and wind energy due to abundance and declining installation cost, it can be predicted that RFBs will enter a period of rapid development. Basically,RFBs are electrochemical energy storage devices that decouple energy and power of the system by storing liquid electrolyte in tanks outside battery system itself. Such a unique framework makes RFBs flexible and fulfills the various demands of grids. During battery operation, redox-active species are …


Phonon Signature Of Charge Inhomogeneity In High Temperature Superconductors Yba2cu3o6+X, Y. Petrov, T. Egami, R. J. Mcqueeney, Mohana Yethiraj, Herbert A. Mook Oct 2018

Phonon Signature Of Charge Inhomogeneity In High Temperature Superconductors Yba2cu3o6+X, Y. Petrov, T. Egami, R. J. Mcqueeney, Mohana Yethiraj, Herbert A. Mook

Materials Science and Engineering Faculty Research & Creative Works

Temperature and composition dependences of high-energy longitudinal optical (LO) phonons in YBa2Cu3O6+x, studied by inelastic neutron scattering measurements, provide clear evidence for temperature dependent spatial inhomogeneity of doped charges. The measurements indicate that charge doping increases the volume fraction of the charged regions, while the local charge density remains unchanged. For the optimally doped sample the charge distribution changes sharply near the superconducting transition temperature, with stronger charge inhomogeneity below TC. The remarkable magnitude of the phonon response to charge suggests strong involvement of phonons in charge dynamics.


The New Application Of Battery-Electrode Reaction: Decoupled Hydrogen Production In Water Electrolysis, Yuan-Yuan Ma, Zhao-Wei Guo, Yong-Gang Wang, Yong-Yao Xia Oct 2018

The New Application Of Battery-Electrode Reaction: Decoupled Hydrogen Production In Water Electrolysis, Yuan-Yuan Ma, Zhao-Wei Guo, Yong-Gang Wang, Yong-Yao Xia

Journal of Electrochemistry

Hydrogen has been considered as a promising alternative to unsustainable fossil fuels because of its high calorific value, clean and abundant resources. Water electrolysis combined with renewable energy is regarded as the best way for hydrogen production, which will become the foundation of future hydrogen economy. For the past few years, many efforts have been employed to develop the cheap and high-performance catalyst for hydrogen evolution reaction and oxygen evolution reaction. However,the coupled hydrogen and oxygen evolution and the use of the expensive membrane have greatly restricted the flexibility of the conventional water electrolysis, and hindered the utilization of renewable …


Design Strategies Toward Highly Active Electrocatalysts For Oxygen Evolution Reaction, Tang Tang, Wen-Jie Jiang, Shuai Niu, Jin-Song Hu Oct 2018

Design Strategies Toward Highly Active Electrocatalysts For Oxygen Evolution Reaction, Tang Tang, Wen-Jie Jiang, Shuai Niu, Jin-Song Hu

Journal of Electrochemistry

Electrocatalytic water splitting is pivotal for efficient and economical production of hydrogen and oxygen gasses. However, the efficiency of the whole device is largely limited by the oxygen evolution reaction (OER) at the anode due to its sluggish kinetics. Thus, it is imperative to develop inexpensive, highly active OER catalysts to lower the reaction barriers. By examining the underlying critical factors for OER performance, this review outlines general principles for designing efficient nanosized OER catalysts, including (1) enhancing the intrinsic activity of active site by electronic modulation, crystallinity modulation, phase control, defect engineering and spin state engineering; (2) designing appropriate …


Research Progresses In Improvement For Low Temperature Performance Of Lithium-Ion Batteries, Yue-Ru Gu, Wei-Min Zhao, Chang-Hu Su, Chuan-Jun Luo, Zhong-Ru Zhang, Xu-Jin Xue, Yong Yang Oct 2018

Research Progresses In Improvement For Low Temperature Performance Of Lithium-Ion Batteries, Yue-Ru Gu, Wei-Min Zhao, Chang-Hu Su, Chuan-Jun Luo, Zhong-Ru Zhang, Xu-Jin Xue, Yong Yang

Journal of Electrochemistry

Lithium-ion batteries (LIBs) have become a new research hotspot due to their high energy density and long service life. However, the temperature characteristics, especially the poor performance at low temperatures, have seriously limited their wider applications. In this report, the research progresses in the low temperature performance of LIBs are reviewed. The main existing limitations of LIBs at low temperatures were systematically analyzed, and followed by discussion on the recent improvements in low temperature performances by developing novel cathode, electrolyte, and anode materials. The developments for improving the low temperature performance of LIBs are prospected. The three most important factors …


Recent Process In Transition-Metal-Oxide Based Catalysts For Oxygen Reduction Reaction, Yao Wang, Zi-Dong Wei Oct 2018

Recent Process In Transition-Metal-Oxide Based Catalysts For Oxygen Reduction Reaction, Yao Wang, Zi-Dong Wei

Journal of Electrochemistry

Transition metal oxides (TMOs) based catalysts have become the most promising catalysts to be employed in anion exchange membrane fuel cell for the sluggish oxygen reduction reaction (ORR). However, their ORR activity is still far from that of the Pt-based catalysts. Therefore, it is important to develop high performance TMO based catalysts. Electrical conductivity and intrinsic activity have been regarded as the two keys to affect the ORR activity of the TMOs based catalysts. In this review, we focused on the recent progresses in the fundamental viewpoints on the electrical conductivity and intrinsic activity of the TMOs based ORR catalysts. …


Magnetic Ordering In A Vanadium-Organic Coordination Polymer Using A Pyrrolo[2,3-D:5,4-D']Bis(Thiazole)-Based Ligand, Yulia A. Getmanenko, Christopher S. Mullins, Vladimir N. Nesterov, Stephanie Lake, Chad Risko, Ezekiel Johnston-Halperin Oct 2018

Magnetic Ordering In A Vanadium-Organic Coordination Polymer Using A Pyrrolo[2,3-D:5,4-D']Bis(Thiazole)-Based Ligand, Yulia A. Getmanenko, Christopher S. Mullins, Vladimir N. Nesterov, Stephanie Lake, Chad Risko, Ezekiel Johnston-Halperin

Chemistry Faculty Publications

Here we present the synthesis and characterization of a hybrid vanadium-organic coordination polymer with robust magnetic order, a Curie temperature TC of ∼110 K, a coercive field of ∼5 Oe at 5 K, and a maximum mass magnetization of about half that of the benchmark ferrimagnetic vanadium(tetracyanoethylene)~2 (V·(TCNE)~2). This material was prepared using a new tetracyano-substituted quinoidal organic small molecule 7 based on a tricyclic heterocycle 4-hexyl-4H-pyrrolo[2,3-d:5,4-d′]bis(thiazole) (C6-PBTz). Single crystal X-ray diffraction of the 2,6-diiodo derivative of the parent C6-PBTz, showed a disordered hexyl chain and …


The Impact Of Graphene Additives On Residual Stress In 3d Printed Parts, Garrett Carter, Sahar Rostom, Mark Dadmun Oct 2018

The Impact Of Graphene Additives On Residual Stress In 3d Printed Parts, Garrett Carter, Sahar Rostom, Mark Dadmun

Von Braun Symposium Student Posters

No abstract provided.


Micronutrient Availability In Alternative Foods During Agricultural Catastrophes, David C. Denkenberger, Joshua M. Pearce Oct 2018

Micronutrient Availability In Alternative Foods During Agricultural Catastrophes, David C. Denkenberger, Joshua M. Pearce

Department of Materials Science and Engineering Publications

Several catastrophes could block the sun, including asteroid/comet impact, super volcanic eruption, and nuclear war with the burning of cities (nuclear winter). Previous work has analyzed alternate food supplies (e.g., mushrooms growing on dead trees, bacteria growing on natural gas). This was shown to be technically capable of feeding everyone with macronutrients (protein, carbohydrates, and lipids) and minerals, although economics and politics remain uncertain. The present work analyzes vitamin availability in such alternative food scenarios. The vitamin content of various alternate foods is compared to the US recommended daily allowance (RDA) as well as the average requirement defined by the …


Hyperspectral Imaging For Characterizing Single Plasmonic Nanostructure And Single-Cell Analysis, Nishir Sanatkumar Mehta Oct 2018

Hyperspectral Imaging For Characterizing Single Plasmonic Nanostructure And Single-Cell Analysis, Nishir Sanatkumar Mehta

LSU Master's Theses

Orientation of plasmonic nanostructures is an important feature in many nanoscale applications such as photovoltaics, catalyst, biosensors DNA interactions, protein detections, hotspot of surface-enhanced Raman spectroscopy (SERS), and fluorescence resonant energy transfer (FRET) experiments. Silver nanocubes with significant spectral signatures between 400-700 nm are observed in this experimental research. Whereas study of single cells will enable the analysis of cell-to-cell variations within a heterogeneous population. These variations are important for further analysis and understanding of disease propagation, drug development, stem cell differentiation, embryos development, and how cells respond to each other and their environment. Adipose-derived mesenchymal stem cells possess the …


Magnetic And Electrocatalytic Properties Of Transition Metal Doped Mos2 Nanocrystals, Karthik Chinnathambi Oct 2018

Magnetic And Electrocatalytic Properties Of Transition Metal Doped Mos2 Nanocrystals, Karthik Chinnathambi

Materials Science and Engineering Faculty Publications and Presentations

In this paper, the magnetic and electrocatalytic properties of hydrothermally grown transition metal doped (10% of Co, Ni, Fe, and Mn) 2H-MoS2 nanocrystals (NCs) with a particle size 25–30 nm are reported. The pristine 2H-MoS2 NCs showed a mixture of canted anti-ferromagnetic and ferromagnetic behavior. While Co, Ni, and Fe doped MoS2 NCs revealed room temperature ferromagnetism, Mn doped MoS2 NCs showed room temperature paramagnetism, predominantly. The ground state of all the materials is found to be canted-antiferromagnetic phase. To study electrocatalytic performance for hydrogen evolution reaction, polarization curves were measured for undoped and the doped …


Three-Dimensional Forming Of Multi-Layered Materials: Material Heat Response And Quality Aspects, Sami-Seppo Ovaska, Pavel Geydt, Ville Leminen, Johanna Lyytikäinen, Sami Matthews, Panu Tanninen, Malte Wallmeier, Marek Hauptmann, Kaj Backfolk Oct 2018

Three-Dimensional Forming Of Multi-Layered Materials: Material Heat Response And Quality Aspects, Sami-Seppo Ovaska, Pavel Geydt, Ville Leminen, Johanna Lyytikäinen, Sami Matthews, Panu Tanninen, Malte Wallmeier, Marek Hauptmann, Kaj Backfolk

Journal of Applied Packaging Research

The micro- and macrostructural changes occurring in multi-layered substrates during three-dimensional forming were studied by atomic force microscopy (AFM), scanning electron microscopy (SEM) and optical analyses. Particular attention was paid to heat-induced deformations at the interface between of polymeric coating layer and the paperboard. With excessive heat transfer, occasional delamination of polyethylene terephthalate (PET) coating from the paperboard was observed. The mechanism behind delamination was studied in detail in-situ with an AFM at temperatures relevant to the converting process. Based on the analysis, the delamination could partially be linked to the widening of the initially-existing nano-scale cracks at the coating-paperboard …


Photocatalytic Activity: Experimental Features To Report In Heterogeneous Photocatalysis, Md. Ariful Hoque, Marcelo I. Guzman Oct 2018

Photocatalytic Activity: Experimental Features To Report In Heterogeneous Photocatalysis, Md. Ariful Hoque, Marcelo I. Guzman

Chemistry Faculty Publications

Heterogeneous photocatalysis is a prominent area of research with major applications in solar energy conversion, air pollution mitigation, and removal of contaminants from water. A large number of scientific papers related to the photocatalysis field and its environmental applications are published in different journals specializing in materials and nanomaterials. However, many problems exist in the conception of papers by authors unfamiliar with standard characterization methods of photocatalysts as well as with the procedures needed to determine photocatalytic activities based on the determination of “apparent quantum efficiencies” within a wavelength interval or “apparent quantum yields” in the case of using monochromatic …


Carbon-Coated Fep Nanoparticles Anchored On Carbon Nanotube Networks As Anode For Long-Life Sodium-Ion Storage, Chunrong Ma, Zhengguang Fu, Changjian Deng, Xiaozhen Liao, Yushi He, Zifeng Ma, Hui Xiong Oct 2018

Carbon-Coated Fep Nanoparticles Anchored On Carbon Nanotube Networks As Anode For Long-Life Sodium-Ion Storage, Chunrong Ma, Zhengguang Fu, Changjian Deng, Xiaozhen Liao, Yushi He, Zifeng Ma, Hui Xiong

Materials Science and Engineering Faculty Publications and Presentations

A novel electrode design strategy of carbon-coated FeP particles anchored on a conducting carbon nanotube network (CNT@FePC) is designed to achieve a superior sodium ion storage. Such a unique structure demonstrated excellent long-life cycling stability (a 95% capacity retention for more than 1200 cycles at 3 A g-1) and rate capability (delivered 272 mAh g-1 at 8 A g-1).


Highly Thiolated Poly (Beta-Amino Ester) Nanoparticles For Acute Redox Applications, Andrew L. Lakes, David A. Puleo, J. Zach Hilt, Thomas D. Dziubla Oct 2018

Highly Thiolated Poly (Beta-Amino Ester) Nanoparticles For Acute Redox Applications, Andrew L. Lakes, David A. Puleo, J. Zach Hilt, Thomas D. Dziubla

Chemical and Materials Engineering Faculty Publications

Disulfides are used extensively in reversible cross-linking because of the ease of reduction into click-reactive thiols. However, the free-radical scavenging properties upon reduction are often under-considered. The free thiols produced upon reduction of this disulfide material mimic the cellular reducing chemistry (glutathione) that serves as a buffer against acute oxidative stress. A nanoparticle formulation producing biologically relevant concentrations of thiols may not only provide ample chemical conjugation sites, but potentially be useful against severe acute oxidative stress exposure, such as in targeted radioprotection. In this work, we describe the synthesis and characterization of highly thiolated poly (β-amino ester) (PBAE) nanoparticles …