Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 6061 - 6090 of 16796

Full-Text Articles in Materials Science and Engineering

Synthesis Of Metal Oxide Surface And Interface Arrays By A Combined Solid-Liquid- Vapor/Vapor-Liquid-Solid Approach, Alexandra J. Riddle Jan 2020

Synthesis Of Metal Oxide Surface And Interface Arrays By A Combined Solid-Liquid- Vapor/Vapor-Liquid-Solid Approach, Alexandra J. Riddle

Theses and Dissertations--Chemistry

This project was motivated by an in situ heating experiment in the transmission electron microscope (TEM) in which gold (Au) nanoparticles were observed to dissolve tin dioxide (SnO2) nanowires (NWs) under vacuum. The explanation for this observation was that the high-temperature and low-pressure environment of the TEM caused the reverse reaction of the well-known vapor-liquid-solid (VLS) method commonly used to grow NWs. In the VLS process, a metal catalyst absorbs reactant vapor until it becomes supersaturated. The precipitation of the NW occurs at the liquid-solid interface, which ceases when there is no longer reactant vapor, and the diameter of the …

Go to article

Shape Tuning Of Silicon Nano-Tip Arrays Through Reactive Ion Etching For Cold Field Emission, Giridhar Tulasi Ram Sankabathula Jan 2020

Shape Tuning Of Silicon Nano-Tip Arrays Through Reactive Ion Etching For Cold Field Emission, Giridhar Tulasi Ram Sankabathula

Graduate Research Theses & Dissertations

Large area silicon nano-tip arrays have been predominantly used as cold cathode electron sources in the wide range of field emission applications. Various fabrication methodologies have been developed over the decades to obtain sharp-pointed field emitters. In this thesis, we mainly emphasized on reproducing high aspect ratio field emitters and to study their surface topographical changes encountered through reactive ion etching. A discrete set of high-density field emitters have been fabricated over the large area surfaces through a three-step nanofabrication process. The surface curvatures of the obtained emitter tips are finely tuned with multiple oxidation cycles to achieve a tip’s …

Go to article

Interfaces In Lead-Free Tin Perovskite Photovoltaics: An Investigation Of Energetics, Ion Mobility, Surface Modification, And Performance, Alex Boehm Jan 2020

Interfaces In Lead-Free Tin Perovskite Photovoltaics: An Investigation Of Energetics, Ion Mobility, Surface Modification, And Performance, Alex Boehm

Theses and Dissertations--Chemistry

Halide perovskites have generated tremendous interest as low-cost semiconductors for optoelectronics, such as photovoltaics, lasers, and light emitting diodes due to their extraordinary optical and transport properties. Perovskite photovoltaics in particular have demonstrated a meteoric rise in power conversion efficiencies and drawn considerable interest as a next-generation solar energy technology. The rapid development has centered around lead-based derivatives, and concerns regarding the toxicity of lead has sparked interest in low toxicity and more environmentally friendly perovskite derivatives. In this regime tin (Sn) is regarded as a prominent alternative owing to the ideal bandgap and reduced toxicity exhibited by Sn-halide perovskites. …

Go to article

Supercritical Processed Decellularized Extracellualr Matrix As Regeneration Therapeutics Applying 3d Printing, Seungwon Chung Jan 2020

Supercritical Processed Decellularized Extracellualr Matrix As Regeneration Therapeutics Applying 3d Printing, Seungwon Chung

Open Access Theses & Dissertations

Extracellular matrix has been broadly applied and show great promise in medical applications and tissue engineering. Product of extracellular matrix (ECM) should be treated with decellularization and purification process. Supercritical carbon dioxide treatment is of particular interest for purifying ECM because of its medically available and rapid speed of process. However, it is not fully researched in treatment of biomaterials for tissue engineering. Therefore, we investigated optimal conditions of supercritical carbon dioxide processing in different extracting parameters from porcine adipose tissue. The 3-day, dual treatment including enzymatic decellularization and supercritical fluid extraction of pork adipose tissue were performed. Two types …

Go to article

Open-Ended Capstone Project: Designing And Manufacturing Of A Low-Cost Carbon Fiber Reinforced Composite Suborbital Rocket Payload Housing Using A 3d Printed Core, Garam Kim, Sergey Dubikovsky, Peng Hao Wang, Ronald Sterkenburg Jan 2020

Open-Ended Capstone Project: Designing And Manufacturing Of A Low-Cost Carbon Fiber Reinforced Composite Suborbital Rocket Payload Housing Using A 3d Printed Core, Garam Kim, Sergey Dubikovsky, Peng Hao Wang, Ronald Sterkenburg

International Journal of Aviation, Aeronautics, and Aerospace

Composite materials are utilized in many industries today due to its high performance and lightweight. However, the part manufacturing process of traditional composites is complicated and often involves high cost. The molds used for composite manufacturing are usually one of the contributors to the high part manufacturing cost. The authors demonstrated in this paper a manufacturing process for a carbon fiber reinforced composite rocket payload housing using an additively manufactured polylactic acid (PLA) payload housing core. The paper also demonstrates the designing and manufacturing of a functional product, which was used in a real-life application, achieved by college undergraduate students. …

Go to article

Chloride Effect In Fly Ash Geopolymer Cement, Evan Dimmick Jan 2020

Chloride Effect In Fly Ash Geopolymer Cement, Evan Dimmick

Williams Honors College, Honors Research Projects

The production of ordinary portland cement (OPC) poses a significant impact on the world's carbon dioxide emissions through the wide global use of concrete. Geopolymer cements (GPC) made from alkali activated fly ash can serve as a replacement to OPCs, reducing the carbon dioxide emissions by as much as 80%. GPCs exhibit adequate or superior mechanical performance to OPCs. The corrosion of carbon steel rebar in concrete occurs largely from chloride ion attack. The focus of this project will be to experimentally determine the coefficient of diffusion for chloride ions in GPCs and OPCs and compare to the corrosion performance …

Go to article

Effects Of Sensitization On Intergranular Boundaries Of Aluminum Alloy 5083, Kyle Balentine Jan 2020

Effects Of Sensitization On Intergranular Boundaries Of Aluminum Alloy 5083, Kyle Balentine

Williams Honors College, Honors Research Projects

The purpose of this Honors Research Project is to show the effect of sensitization on intergranular corrosion (IGC) on AA5083. Sensitization is the process of a material to experience microstructural phase change, caused by thermal treatment, which promotes precipitation of secondary phases on the grain boundaries. The nitric acid mass loss test (NAMLT), SEM analysis, cyclic potentiodynamic polarization (CPP), and Electrochemical Impedance Spectroscopy (EIS) were performed to find a correlation to the degree of sensitization (DOS) and the pitting and IGC mechanisms. The DOS increased as heat treatment was applied. The SEM images displayed no clear precipitates on the grain …

Go to article

Behavior Of Sandwich Core Under Extreme Temperature Conditions, Mikayla L. Aowad Jan 2020

Behavior Of Sandwich Core Under Extreme Temperature Conditions, Mikayla L. Aowad

Williams Honors College, Honors Research Projects

Sandwich materials are growing in popularity as more research and data is collected. I am studying the inner foam of the sandwich composites. I am testing the bending strength of the material by performing a three point bend test on foam specimens of varying density and material. The specimens will be tested at room temperature as well as extreme low temperature. I am studying how the mechanical properties of the material change as the material’s surroundings change. Cell wall thickness and cell size will be analyzed to see if there is a correlation between those parameters and the strength of …

Go to article

Impact Of Chain Architecture On The Thickness Dependence Of Physical Aging Rate Of Thin Polystyrene Films, Gregory Brown, Elizabeth Lewis, Bryan D. Vogt Jan 2020

Impact Of Chain Architecture On The Thickness Dependence Of Physical Aging Rate Of Thin Polystyrene Films, Gregory Brown, Elizabeth Lewis, Bryan D. Vogt

Williams Honors College, Honors Research Projects

The dynamics of polymer thin films have been demonstrated to be significantly altered from the bulk, but the origins of such differences are not well defined. In this work, we seek to understand the differences in the structural dynamics (or physical aging) of polystyrene (PS) through branching and other well defined architectures (comb and centipede). The aging dynamics of ultrathin films (< 30 nm) differ from relatively thick films (100-150nm) with linear PS thin films aging more rapidly than the relatively “bulk-like” thick films. Ellipsometric measurements are used to characterize the physical aging rate of the films. The change in film thickness and refractive index as the films are held below the glass transition temperature (Tg) provides a simple measure of the physical aging. In this study, four different architectures (linear, comb, 4 arm star, and centipede) will be investigated. For each PS architecture, the aging rate will be determined for film …

Go to article

A Theoretical And Experimental Study Of Charge Transport In Organic Thermoelectric Materials And Charge Transfer States In Organic Photovoltaics, Ashkan Abtahi Jan 2020

A Theoretical And Experimental Study Of Charge Transport In Organic Thermoelectric Materials And Charge Transfer States In Organic Photovoltaics, Ashkan Abtahi

Theses and Dissertations--Physics and Astronomy

Applications of organic electronics have increased significantly over the past two decades. Organic semiconductors (OSC) can be used in mechanically flexible devices with potentially lower cost of fabrication than their inorganic counterparts, yet in many cases organic semiconductor-based devices suffer from lower performance and stability. Investigating the doping mechanism, charge transport, and charge transfer in such materials will allow us to address the parameters that limit performance and potentially resolve them. In this dissertation, organic materials are used in three different device structures to investigate charge transport and charge transfer. Chemically doped π-conjugated polymers are promising materials to be used …

Go to article

Classification And Biological Identity Of Complex Nano Shapes, Luca Boselli, Hender Lopez, Wei Zhang, Qi Cai, Valeria A. Giannone, Jingji Li, Alirio Moura, João M. De Araujo, Jennifer Cookman, Valentina Castagnola, Yan Yan, Kenneth A. Dawson Jan 2020

Classification And Biological Identity Of Complex Nano Shapes, Luca Boselli, Hender Lopez, Wei Zhang, Qi Cai, Valeria A. Giannone, Jingji Li, Alirio Moura, João M. De Araujo, Jennifer Cookman, Valentina Castagnola, Yan Yan, Kenneth A. Dawson

Articles

Everywhere in our surroundings we increasingly come in contact with nanostructures that have distinctive complex shape features on a scale comparable to the particle itself. Such shape ensembles can be made by modern nano-synthetic methods and many industrial processes. With the ever growing universe of nanoscale shapes, names such as “nanoflowers” and “nanostars” no longer precisely describe or characterise the distinct nature of the particles. Here we capture and digitise particle shape information on the relevant size scale and create a condensed representation in which the essential shape features can be captured, recognized and correlated. We find the natural emergence …

Go to article

Microstructure And Mechanical Behavior Of Metastable Beta Type Titanium Alloys, Chirag Dhirajlal Rabadia Jan 2020

Microstructure And Mechanical Behavior Of Metastable Beta Type Titanium Alloys, Chirag Dhirajlal Rabadia

Theses: Doctorates and Masters

Current biomaterials such as stainless steel, Co-Cr alloys, commercially pure titanium and Ti-6Al- 4V either possess poor mechanical compatibility and/or produce toxic effects in the human body after several years of usage. Consequently, there is an enormous demand for long-lasting biomaterials which provide a better combination of mechanical, corrosion and biological properties. In addition to this, alloys used in high-strength applications possess either high-strength or large plasticity. However, a high-strength alloy should possess a better blend of both strength and plasticity when used in high-strength applications. Metastable β-titanium alloys are the best suited alloys for biomedical and high-strength applications because …

Go to article

Fabrication Of Dielectric Elastomers With Improved Electromechanical Properties Using Silicone Rubber And Walnut Polyphenols Modified Dielectric Particles, Liang Jiang, Yuhao Wang, Shipeng Wen, Yanfen Zhou, Qingdao University, Stephen Jerrams Jan 2020

Fabrication Of Dielectric Elastomers With Improved Electromechanical Properties Using Silicone Rubber And Walnut Polyphenols Modified Dielectric Particles, Liang Jiang, Yuhao Wang, Shipeng Wen, Yanfen Zhou, Qingdao University, Stephen Jerrams

Articles

In this work, polyphenolic extract from walnut green husks (denoted as walnut polyphenols), which is an abun-dant agroindustrial residue/waste, was used to modify barium titanate (BT) particles in the preparation of sili-cone rubber (SR) based dielectric elastomer (DE) composites with enhanced electromechanical performance.By employing walnut polyphenols modification, the dispersibility of BT particles in the SR matrix and the com-patibility between BT and SR were greatly improved, which resulted in enhanced mechanical performance ofthe DE composites. Dielectric property measurement showed that DE composites containing walnut polyphenolsmodified BT particles (WNBT) had higher dielectric constants and lower dielectric losses than that of DEs …

Go to article

Enhanced Fatigue And Durability Of Carbon Black/Natural Rubber Composites Reinforced With Graphene Oxide And Carbon Nanotubes, Hao Guo, Stephen Jerrams, Zongchao Xu, Yanfen Shou, Liang Jiang, Liqun Zhang, Li Liu, Shipeng Wen Jan 2020

Enhanced Fatigue And Durability Of Carbon Black/Natural Rubber Composites Reinforced With Graphene Oxide And Carbon Nanotubes, Hao Guo, Stephen Jerrams, Zongchao Xu, Yanfen Shou, Liang Jiang, Liqun Zhang, Li Liu, Shipeng Wen

Articles

Graphene oxide (GO) sheets and carbon nanotubes (CNTs) are of nanometer size and offer large shape factors which are beneficial in reducing crack propagation rates of composites when used in carbon black (CB) reinforced natural rubber (NR), thereby prolonging the service lives of rubber composites. In this research, CNT-CB/NR and GO-CB/NR composites were prepared by partially replacing CB with one-dimensional CNTs and two-dimensional flaky graphene oxide GO, respectively. The results showed that the complex filler dispersion in NR matrices was improved due to the isolation effect between the different fillers. The strain-induced crystallization (SIC) ability of CB/NR was effectively enhanced …

Go to article

The Fabrication And Properties Of Magnetorheological Elastomers Employing Bio-Inspired Dopamine Modified Carbonyl Iron Particles, Yanfen Zhou, Lele Li, Wenyue Li, Shipeng Wen, Liang Jiang, Stephen Jerrams, Jianwei Ma, Shaojuan Chen Jan 2020

The Fabrication And Properties Of Magnetorheological Elastomers Employing Bio-Inspired Dopamine Modified Carbonyl Iron Particles, Yanfen Zhou, Lele Li, Wenyue Li, Shipeng Wen, Liang Jiang, Stephen Jerrams, Jianwei Ma, Shaojuan Chen

Articles

To obtain magnetorheological elastomers (MREs) with improved mechanical properties and exhibiting an enhanced magnetorheological (MR) effect, bio-inspired dopamine modification has been used to improve the functionality at the surface of carbonyl iron (CI) particles. Various techniques including x-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to confirm that a polydopamine (PDA) layer of about 27.5 nm had been successfully deposited on the surface of the carbonyl iron particles prior to their inclusion in the MRE composites. The magnetic properties of PDA modified CI particles were shown to be almost the same as those …

Go to article

Enhanced Covalent Interface, Crosslinked Network And Gas Barrier Property Of Functionalized Graphene Oxide/Styrene-Butadiene Rubber Composites Triggered By Thiol-Ene Click Reaction, Long Zheng, Stephen Jerrams, Tian Su, Zongchao Xu, Liqun Zhang, Li Liu, Shipeng Wen Jan 2020

Enhanced Covalent Interface, Crosslinked Network And Gas Barrier Property Of Functionalized Graphene Oxide/Styrene-Butadiene Rubber Composites Triggered By Thiol-Ene Click Reaction, Long Zheng, Stephen Jerrams, Tian Su, Zongchao Xu, Liqun Zhang, Li Liu, Shipeng Wen

Articles

The high gas barrier property of a rubber composite is of great significance for reducing the exhaust gas emissions due to tire rolling resistance and hence the contribution this factor makes to environmental protection. Enhanced covalent interfaces and crosslinked networks are crucial to the gas barrier property of rubber composites. In this research, γ-mercaptopropyltriethoxysilane (MPS) modified GO (MGO)/styrene-butadiene rubber (SBR) composites were prepared by a synergetic strategy of latex compounding method and thiol-ene click reaction. It was found that the mercapto groups in MGO reacted with the vinyl groups in SBR molecules through thiol-ene click reaction during the crosslinking process …

Go to article

Aging Response On The Stress Corrosion Cracking Behavior Of Wrought Precipitation-Hardened Magnesium Alloy, G. R. Argade, S. K. Panigrahi, R. S. Mishra Jan 2020

Aging Response On The Stress Corrosion Cracking Behavior Of Wrought Precipitation-Hardened Magnesium Alloy, G. R. Argade, S. K. Panigrahi, R. S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

Constant immersion testing and slow strain rate testing (SSRT) are conducted on wrought magnesium alloy in a 3.5 wt.% NaCl solution. After solution annealing (SA) at 525 °C for 8 h, the alloy was isothermally aged at 210 °C for 15 h, 48 h, and 144 h to obtain underaged (UA), peak-aged (PA), and overaged (OA) microstructures, respectively. After 32 days of constant exposure in chloride solution, the SA and UA samples showed the lowest (~ 0.10 mg cm−2 day−1) and the highest (~ 0.20 mg cm−2 day−1) weight loss, respectively. SSRT was carried out at an initial strain rate …

Go to article

Electron Tunneling And X-Ray Photoelectron Spectoscopy Studies Of The Superconductiong Properties Of Nitrogen-Doped Niobium Resonator Cavities, Eric M. Lechner, Basu Dev Oli, Junki Makita, Gianluigi Ciovati, Alex Gurevich, Maria Iavarone Jan 2020

Electron Tunneling And X-Ray Photoelectron Spectoscopy Studies Of The Superconductiong Properties Of Nitrogen-Doped Niobium Resonator Cavities, Eric M. Lechner, Basu Dev Oli, Junki Makita, Gianluigi Ciovati, Alex Gurevich, Maria Iavarone

Physics Faculty Publications

We use scanning tunneling microscopy (STM) and spectroscopy (STS), and x-ray photoelectron spectroscopy (XPS) to investigate the effect of nitrogen doping on the surface electronic and chemical structures of cutouts from superconducting Nb radio-frequency cavities. The goal of this work is to get insights into the fundamental physics and materials mechanisms behind the striking decrease of the surface resistance with the radio-frequency magnetic field, which has been observed on N-doped Nb cavities. Our XPS measurements reveal significantly more oxidized Nb 3d states and a thinner metallic suboxide layer on the N-doped Nb surfaces, which is also confirmed by tunneling spectroscopy …

Go to article

Potential Of Module Arrangements To Enhance Convective Cooling In Solar Photovoltaic Arrays, B. Stanislawski, Fabien Margairaz, Raúl Bayoán Cal, Marc Calaf Jan 2020

Potential Of Module Arrangements To Enhance Convective Cooling In Solar Photovoltaic Arrays, B. Stanislawski, Fabien Margairaz, Raúl Bayoán Cal, Marc Calaf

Mechanical and Materials Engineering Faculty Publications and Presentations

When solar photovoltaic (PV) module temperatures rise during operation, commonly-installed modules experience an efficiency loss between 0.1 and 0.5% per degree above 25+C. Thus, extensive research has aimed to reduce the operating temperature of solar modules. However, many cooling solutions require additional cost or equipment that precludes their implementation in utility-scale PV plants. Based on previous studies of land-atmosphere interactions of surface thermal heterogeneity, we hypothesize that certain solar farm arrangements may enhance natural convective heat transfer between the solar modules and surrounding flow. Due to the strong non-linear relationship between module temperature and convective heat transfer, enhancing the convective …

Go to article

Thei Student Applied Research Presentations Sarp 2020, Research Office, Technological And Higher Education Institute Of Hong Kong Jan 2020

Thei Student Applied Research Presentations Sarp 2020, Research Office, Technological And Higher Education Institute Of Hong Kong

THEi Student Applied Research Presentations (SARP)

No abstract provided.

Go to article

Texture Evolution Induced By Twinning And Dynamic Recrystallization In Dilute Mg-1sn-1zn-1al Alloy During Hot Compression, Meijuan Hao, Weili Cheng, Lifei Wang, Ehsan Mostaed, Liping Bian, Hongxia Wang, Xiaofeng Niu Jan 2020

Texture Evolution Induced By Twinning And Dynamic Recrystallization In Dilute Mg-1sn-1zn-1al Alloy During Hot Compression, Meijuan Hao, Weili Cheng, Lifei Wang, Ehsan Mostaed, Liping Bian, Hongxia Wang, Xiaofeng Niu

Michigan Tech Publications, Part 1

Texture evolution of an extruded dilute Mg-1Sn-1Zn-1Al alloy was thoroughly investigated based on the twinning and dynamic recrystallization (DRX) behavior via hot compression at a strain rate of 10 s−1 and temperature of 225°C. It was found that the types and intensities of the texture are strongly dependent on the fraction of twins and DRX modes as well as regions where sub-grain boundaries (sub-GBs) are intensively accumulated. At the initial stage of deformation, the formation of compression direction (CD)-tilted basal texture was mainly determined by the occurrence of {101¯2} extension twins. As the strain increases, the variation in the texture …

Go to article

Very High Cycle Fatigue Behavior Of Laser Beam-Powder Bed Fused Inconel 718 Considering The Layer Orientation And Surface Finish Effects, Palmer Frye Jan 2020

Very High Cycle Fatigue Behavior Of Laser Beam-Powder Bed Fused Inconel 718 Considering The Layer Orientation And Surface Finish Effects, Palmer Frye

UNF Graduate Theses and Dissertations

Additive Manufacturing (AM) techniques have recently gained popularity for fabrication of parts used in aerospace applications. Some of these parts may be subjected to cyclic loading at very high frequencies, leading to service life requirements exceeding ten-million cycles (>107 cycles). Therefore, understanding the very high-cycle fatigue (VHCF) behavior of these AM parts is an important step in their design and qualification processes. In this thesis, both high-cycle fatigue (HCF) and VHCF behaviors of Inconel 718, a Ni-base superalloy, manufactured via a Laser Beam-Powder Bed Fusion (LB-PBF) process, are investigated. Uniaxial, fully reversed force-controlled fatigue tests were conducted utilizing …

Go to article

Thermodynamic Investigations Of Pure And Blended Cement Mixtures, Jonathan Lapeyre Jan 2020

Thermodynamic Investigations Of Pure And Blended Cement Mixtures, Jonathan Lapeyre

Doctoral Dissertations

” This research is made up of several studies. The first study focused on understanding the reaction kinetics of Ca3SiO5 and metakaolin (MK) mixtures compared to Ca3SiO5 and silica fume (SF) mixtures. It was shown that MK was a more effective additive than SF at small replacement levels (i.e. ≥ 10% by mass) while higher replacement levels of MK became a detriment due to excess (Al(OH)4¯) ions preventing the nucleation and growth of C-S-H. In a follow-up study where the MK particle size distribution (PSD) was modified, similar effects were observed but …

Go to article

From Open Access To Open Science: The Path From Scientific Reality To Open Scientific Communication, Christian Heise, Joshua M. Pearce Jan 2020

From Open Access To Open Science: The Path From Scientific Reality To Open Scientific Communication, Christian Heise, Joshua M. Pearce

Michigan Tech Publications, Part 1

Although opening up of research is considered an appropriate and trend-setting model for future scientific communication, it can still be difficult to put open science into practice. How open and transparent can a scientific work be? This article investigates the potential to make all information and the whole work process of a qualification project such as a doctoral thesis comprehensively and freely accessible on the internet with an open free license both in the final form and completely traceable in development. The answer to the initial question, the self-experiment and the associated demand for openness, posed several challenges for a …

Go to article

Artificial Intelligence In Plasma Electrolytic Micro-Oxidation For Surface Hardening - Insights From Scholarly Citation Networks And Patents., Priya Jadhav, Dr.Arun Bongale, Dr.Satish Kumar, Dr.Amit Kumar Tiwari Jan 2020

Artificial Intelligence In Plasma Electrolytic Micro-Oxidation For Surface Hardening - Insights From Scholarly Citation Networks And Patents., Priya Jadhav, Dr.Arun Bongale, Dr.Satish Kumar, Dr.Amit Kumar Tiwari

Library Philosophy and Practice (e-journal)

Objective - The purpose of this article is to analyze the top work areas and patent domains in the field of surface hardening by micro-arc oxidation. Also, it is directed on the opportunities of data analysis by different machine learning tools. Material and methods - The www.lens.org database is used to collect articles from Elsevier, Trans tech publications, Springer New York, MDPI, etc. to review the relevant articles as well as patents related to the topic. The result - A total of 1057 articles were published in 60 different journals and 756 patents in the area of research under various …

Go to article

Electrospun Fibers With Smart Delivery Of Therapeutic Agents, Zahra Mahdieh Jan 2020

Electrospun Fibers With Smart Delivery Of Therapeutic Agents, Zahra Mahdieh

Graduate Student Theses, Dissertations, & Professional Papers

Electrospinning is the most widely studied technique of producing fibers. Delivery of nanoparticles and therapeutic agents from electrospun fibers have potential uses in various fields including drug delivery, filtration, and cosmetics. However, controlling the delivery rate remains the main challenge. In the current study, core-shell structure fibers were developed with zinc oxide nanoparticles applied in the shell composition to improve the pore structure (release pathway) and mechanical stability. Fine-tuned delivery rates were achieved via loading different sizes of silver nanoparticles (Ag NP) inside the fiber core. In vitro drug release assays showed fast, slow, and intermediate delivery rates of 20 …

Go to article

Hot Deformation Data For Haynes 214, Haynes 230 And Inconel 740h, Benjamin Adam, Julie Tucker, Graham Tewksbury Jan 2020

Hot Deformation Data For Haynes 214, Haynes 230 And Inconel 740h, Benjamin Adam, Julie Tucker, Graham Tewksbury

Mechanical and Materials Engineering Faculty Publications and Presentations

This article presents the datasets gathered for the hot processing of three Ni-based superalloys intended for A-USC application, Haynes 214, Haynes 230 and Inconel 740H. Isothermal compression tests were conducted with a Gleeble 3500 at temperatures between 1000 C and 1200 C and strain rates between 0.01/s and 1/s to a full true strain of 0.7. The obtained true stress-true strain curves were used as basis for hot processing maps, linking temperature, stress and strain rate. Subsequently, all samples were sectioned through the geometric centre to provide microstructural information, captured using EBSD, as well as EDX for the evolution of …

Go to article

Synthesis And Characterization Of Novel Lithium Gallium Phosphate (Ligap2o7) For Extreme Environment Applications, Mohan Raj Rajkumar Jan 2020

Synthesis And Characterization Of Novel Lithium Gallium Phosphate (Ligap2o7) For Extreme Environment Applications, Mohan Raj Rajkumar

Open Access Theses & Dissertations

In this work, we report on the synthesis, characterization, and performance of LiGaP2O7 (LGP), a novel material and fairly new to the scientific & engineering community. LiGaP2O7 materials were was synthesized using the conventional high-temperature, solid-state ceramic reaction. Calcination was done in three steps at the temperatures of 300 °C, 500 °C, and 650 °C for 8 h each to ensure a single phase. Utilizing this, different green pellets were sintered at 800 °C for varying times of 3 h, 6 h, 12 h, and 24 h. The structure, phase, and morphology were analyzed using X-ray diffraction (XRD) and scanning …

Go to article

Effect Of Flow Velocity And Geometry On The Signal From A Piezoelectric Flow Rate Sensor, Jad Gerges Aboud Jan 2020

Effect Of Flow Velocity And Geometry On The Signal From A Piezoelectric Flow Rate Sensor, Jad Gerges Aboud

Open Access Theses & Dissertations

.

Go to article

Development Of Software Tools And Experimental In Situ Electron Spin Resonance For Characterizing The Magnetic And Electrocatalytic Properties Of Transition Metal Chalcogenide Crystals, Jose Armando Delgado Jan 2020

Development Of Software Tools And Experimental In Situ Electron Spin Resonance For Characterizing The Magnetic And Electrocatalytic Properties Of Transition Metal Chalcogenide Crystals, Jose Armando Delgado

Open Access Theses & Dissertations

Studying the magnetic properties and crystal defects of transition metal chalcogenide crystals is of paramount importance for utilizing them for next generation spintronics devices and hydrogen evolution reaction catalysts. Hydrothermally grown transition metal chalcogenide nanocrystals (MoS2, Ru2S3, Rh2S3, Co2S8) were chosen as catalysts for the hydrogen evolution reaction due to their low dimensionality and previous utilization as catalysts for hydrodesulfurization. The relationship between crystal defect sites and catalytic activity must be discerned to maximize the efficiency of hydrogen production during the hydrogen evolution reaction. ESR spectroscopy was utilized as a spin sensitive technique to study the defects and local changes …

Go to article

First Prev Next Last