Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4861 - 4890 of 16387

Full-Text Articles in Materials Science and Engineering

Extraction Of Cellulose Nanofibers From Empty Palm Fruit Bunches Via Mechanical Defibrillation, Zi-Qian Tan, Takaomi Kobayashi, Duangdao Aht-Ong Jan 2021

Extraction Of Cellulose Nanofibers From Empty Palm Fruit Bunches Via Mechanical Defibrillation, Zi-Qian Tan, Takaomi Kobayashi, Duangdao Aht-Ong

Journal of Metals, Materials and Minerals

In recent years, there has been an increasing interest in finding alternative material to replace fossil-oil based product due to the environmental concern. Lignocellulosic biomass has emerged as the promising candidate due to its low-cost and sustainability. The objective of this work was to prepare cellulose nanofibers (CNFs) from empty palm fruit bunches (EPFB), which are the waste originating from palm oil industry. Cellulose fibers were first extracted from EPFB by chemical treatment, followed by mechanical disintegration using high-pressure homogenization. Fiber concentration and defibrillation time during mechanical treatment were studied to investigate their effects on the properties of produced nanofibers. …

Go to article

Investigations On Phase Coexistence And Functional Properties Of Bczt Lead-Free Piezoceramic, Jirapa Tangsritrakul, Thiyanee Sonkami, Chumpon Wichittanakom, Chotiros Dokkhan, Panithi Wiroonpochit Jan 2021

Investigations On Phase Coexistence And Functional Properties Of Bczt Lead-Free Piezoceramic, Jirapa Tangsritrakul, Thiyanee Sonkami, Chumpon Wichittanakom, Chotiros Dokkhan, Panithi Wiroonpochit

Journal of Metals, Materials and Minerals

Large piezoelectric properties was observed in (1-x)BZT-(x)BCT where x=0.5 or Ba0.85Ca0.15Ti0.9Zr0.1O3 (denoted as BCZT), leading to a promising candidate for lead-free piezoelectric materials. However, phase formation of the BCZT is controversial and still unclear since various phase coexistences were identified in the literatures, for instances, the mixed phases of rhombohedral-tetragonal (R-T), ortho-rhombic-tetragonal (O-T) or rhombohedral-orthorhombic-tetragonal (R-O-T). Additionally, it is well known that the crystal structure plays a crucial role on the occurrence of polarization in the piezoceramics. Therefore, this work aims to investigate the coexistence of phase formation at room temperature for the BCZT powder and ceramic. Moreover, the electrical …

Go to article

The Effect Of Phosphogypsum On Stabilizing Clay Soil And Improving Its Properties For Use As Foundation Soil, Mai Yahya Maaitah, Mus'ab Ziad Banat Jan 2021

The Effect Of Phosphogypsum On Stabilizing Clay Soil And Improving Its Properties For Use As Foundation Soil, Mai Yahya Maaitah, Mus'ab Ziad Banat

Journal of Metals, Materials and Minerals

Expansive soil covers large areas in a variety of regions in Jordan which is insufficient to meet the engineering specifications in construction. Phosphogypsum is considered to be the main by-product material which comes from phosphate rock deposits that is available in Jordan. The main purpose of this research is to study the effects of stabilization by phosphogypsum on expansive soil properties. Three Jordanian regions were chosen to represent the expansive soils, Irbid, Madaba, and Abu-Nusire city. Soils were mixed with phosphogypsum at different percentages by dry weight of soil. Some of the representative laboratory tests for swell properties were conducted: …

Go to article

Influence Of Precursor Preparation On The Synthesis Of Boron Carbide From Glutinous Rice Flour, Kannigar Dateraksa, Sujarinee Sinchai Jan 2021

Influence Of Precursor Preparation On The Synthesis Of Boron Carbide From Glutinous Rice Flour, Kannigar Dateraksa, Sujarinee Sinchai

Journal of Metals, Materials and Minerals

Boron carbide is a promising candidate for a variety of applications, including blasting nozzles, neutron moderators, and lightweight armor. Using of inexpensive and readily available starting materials which can react with boric acid to form B-O-C bonds, e.g., glutinous rice flour, is one of alternative means to produce high purity boron carbide powder at low temperature. In this study, boric acid and glutinous rice flour, boron and carbon sources, were used for synthesizing B4C powder by the carbothermic reduction. The mole ratios of boric acid to glutinous rice flour ranging from 1:1 to 2.5:1 were formulated and mixed by continuous …

Go to article

The Effect Of Artificial Defects On The Fatigue Characteristics Of Aisi 4340 Steel, Yakov B. Unigovski, Dmitry Fishman, Liat Fishman, Liron Shichman, Ofir Moshe, Roni Shneck, Emmanuel Gutman Jan 2021

The Effect Of Artificial Defects On The Fatigue Characteristics Of Aisi 4340 Steel, Yakov B. Unigovski, Dmitry Fishman, Liat Fishman, Liron Shichman, Ofir Moshe, Roni Shneck, Emmanuel Gutman

Journal of Metals, Materials and Minerals

This study examined the fatigue life (Nf) and fatigue limit (FL) of AISI 4340 steel in relation to surface roughness, artificial defects and shot peening. Artificial surface defects on fatigue specimens were obtained by electrical discharge machining (EDM) or by pre-corrosion in 3.5% NaCl and perchloric acid solutions, followed by a fatigue test. The presence of artificial defects of various sizes, taken into account by the area  parameter, led to a significant decrease in fatigue characteristics, while shot peening contributed to their noticeable improvement. Defects resulting from electrochemical corrosion had a much greater negative effect on fatigue …

Go to article

Experimental And Numerical Characterization Of Fatigue Crack Propagation In High-Speed Railway Wheel Er8 Steel, Chaichayo Suetrong, Vitoon Uthaisangsuk Jan 2021

Experimental And Numerical Characterization Of Fatigue Crack Propagation In High-Speed Railway Wheel Er8 Steel, Chaichayo Suetrong, Vitoon Uthaisangsuk

Journal of Metals, Materials and Minerals

In this work, characteristics of fatigue crack growth in the Paris regime of the rail wheel steel grade ER8 were investigated. Experimental crack growth tests under different cyclic loads of a compact tension (CT) specimen and corresponding FE simulations were carried out. The extended FE method (XFEM) coupled with damage evolution based on the strain energy release rate or the Paris law was applied to describe the crack propagation mechanism in the tested CT samples. Hereby, the fatigue fracture model parameters were firstly determined from the experimental data. It was found that the predicted crack growth rates agreed well with …

Go to article

Effect Of Cladding Of Stellite-6 Filler Wire On The Surface Of Ss316l Alloy Through Cold Metal Arc Transfer Process, Thinesh Babu Thiagarajan, Sengottuvel Ponnusamy Jan 2021

Effect Of Cladding Of Stellite-6 Filler Wire On The Surface Of Ss316l Alloy Through Cold Metal Arc Transfer Process, Thinesh Babu Thiagarajan, Sengottuvel Ponnusamy

Journal of Metals, Materials and Minerals

In this work, Cladding was done on SS316L alloy through the CMT process using Stellite-6 filler wire. 31 experiments were done at different welding conditions as per CCD matrix. The cladding specimens were characterized by macro and micro-study, Vickers microhardness evaluation and corrosion resistance analysis. An optical microscope, SEM-EDAX, and XRD were used to predict the structural characterizations, presence and the distributions of the elements. Based on the study higher voltage & welding speed showed appreciable hardness at the interface & cladding regions. The thickness of the interface was noted at a maximum of 190 μm. The EDS spectra showed …

Go to article

Preparation Of A Mixed Al/Sc Nano-Oxide Derived From The Bauxite Residue (Red Mud) Via The Sulfuric Acid Roasting–Leaching–Precipitation Process, Razieh Habibpour, Eslam Kashi, Mehdi Janfada Jan 2021

Preparation Of A Mixed Al/Sc Nano-Oxide Derived From The Bauxite Residue (Red Mud) Via The Sulfuric Acid Roasting–Leaching–Precipitation Process, Razieh Habibpour, Eslam Kashi, Mehdi Janfada

Journal of Metals, Materials and Minerals

In this study, three methods were used and compared for the selectable extraction of aluminum/ scandium with the least amount of iron in red mud (RM) samples from the Iran alumina plant in Jajarm as follows: 1) RM direct acid leaching with H2SO4, 2) RM washing with hydrochloric acid and oxalic acid before leaching with H2SO4, and 3) RM sulfuric acid roasting-leaching-precipitation.  The aim was to extract the highest amount of scandium while preventing the leaching of other metals, especially iron. Due to any discriminative features, the selective separation of Al/Sc with …

Go to article

Study Of Mechanical Properties And Characteristics Of Eco-Fibres For Sustainable Children's Clothing, Siti Shukhaila Shaharuddin, Marzie Hatef Jalil, Kaveh Moghadasi Jan 2021

Study Of Mechanical Properties And Characteristics Of Eco-Fibres For Sustainable Children's Clothing, Siti Shukhaila Shaharuddin, Marzie Hatef Jalil, Kaveh Moghadasi

Journal of Metals, Materials and Minerals

The aim of this paper is to study the application of eco-fibres as a new approach to achieve the multifunctional design for children’s clothing toward sustainability in the clothing industry. In this regard, this study focuses on the evaluation of the fabrics’ mechanical properties including tensile strength and microstructural details as critical points for multifunctional children's clothing purposes. The eco-fibre fabrics studied are organic cotton twill and recycled polyester. Studies have proven that frequent laundering and dry-cleaning result in increased pilling. Furthermore, high quality of colour fastness properties was found in 100% organic woven cotton fabric and recycled polyester fabric …

Go to article

Effect Of Micro Graphite Particles On The Microstructure And Mechanical Behavior Of Aluminium 6061 (Al-Mg-Si) Alloy Composites Developed By Novel Two Step Casting Technique, Madeva Nagaral, Raghavendra Pai K., V. Auradi, Bharath V., Shanawaz Patil, Mahantesh S. Tattimani Jan 2021

Effect Of Micro Graphite Particles On The Microstructure And Mechanical Behavior Of Aluminium 6061 (Al-Mg-Si) Alloy Composites Developed By Novel Two Step Casting Technique, Madeva Nagaral, Raghavendra Pai K., V. Auradi, Bharath V., Shanawaz Patil, Mahantesh S. Tattimani

Journal of Metals, Materials and Minerals

In the present research, the effect of micron sized graphite addition on the microstructure and tensile failure of Al6061 alloy has been studied. The Al6061 alloy metal matrix composites reinforced with 6, 9 and 12 varying weight percentages of graphite particles were fabricated by novel two step stir cast route which helps in improving the wettability of Al6061 alloy matrix with graphite particles. The synthesized composites were subjected to microstructural studies, density, hardness and tensile properties testing. Microstructural characterizations of obtained samples were carried out by SEM microscopy, EDS and XRD patterns. The occurrence of graphite particles were confirmed by …

Go to article

Assessment Of Hydrothermal Parameters On Alkaline Activation Of Fly Ashes Using A Central Composite Design, Ivan Supelano García, César Armando Ortíz Otálora, Carlos Arturo Parra Vargas, Julieth Alexandr Mejía Gómez Jan 2021

Assessment Of Hydrothermal Parameters On Alkaline Activation Of Fly Ashes Using A Central Composite Design, Ivan Supelano García, César Armando Ortíz Otálora, Carlos Arturo Parra Vargas, Julieth Alexandr Mejía Gómez

Journal of Metals, Materials and Minerals

Coal fly ash (CFA) is a powder generated during combustion of coal; its improper disposal constitutes an environmental issue. To minimize this problem, one of the uses of CFA is as feedstock for production of zeolite. Different studies have shown that zeolites may be easily obtained from CFA by relatively cheap and fast conversion processes. Most of these studies have been focused on the study of the zeolite synthesis using classical methods through changing one factor per time and fixing the other factors, where it illustrates the impact of each variable individually via a huge number of experiments, however it …

Go to article

The Enhancement Of Ethanol Gas Sensors Response Based On Calcium And Zinc Co-Doped Lafeo3/Fe2o3 Thick Film Ceramics Utilizing Yarosite Minerals Extraction As Fe2o3 Precursor, Endi Suhendi, Zeany Luckyta Amanda, Muhamad Taufik Ulhakim, Andhy Setiawan, Dani Gustaman Syarif Jan 2021

The Enhancement Of Ethanol Gas Sensors Response Based On Calcium And Zinc Co-Doped Lafeo3/Fe2o3 Thick Film Ceramics Utilizing Yarosite Minerals Extraction As Fe2o3 Precursor, Endi Suhendi, Zeany Luckyta Amanda, Muhamad Taufik Ulhakim, Andhy Setiawan, Dani Gustaman Syarif

Journal of Metals, Materials and Minerals

A gas sensor is a renewed interest of research which has been developed to make a device that can be detected the harmful gases and applied in the several fields of industries. In this paper, we report the modified of gas sensor based thick film ceramic LaFeO3/Fe2O3 by added calcium and zinc co-doping prepared by screen-printed technique. In this work, yarosite mineral was utilized as Fe2O3 precursor. It aims to take the advantages of abundance natural resources in Indonesia to save a cost in gas sensor fabrication. Then, x-ray diffraction (XRD), scanning electron microscopy (SEM) and electrical properties characterization were …

Go to article

Investigation Of Deposition Parameters On The Structural Properties And Hardness Of Tialn Films Deposited Via Reactive Pulsed Dc Magnetron Sputteringinvestigation Of Deposition Parameters On Structural Properties And Hardness Of Tialn Films Deposited By Reactive Pulsed Dc Magnetron Sputtering, Jariyaporn Rukkun, Kamon Aiempanakit, Pimchanok Reakaukot, Witthawat Wongpisan, Kirati Waree, Montri Aiempanakit Jan 2021

Investigation Of Deposition Parameters On The Structural Properties And Hardness Of Tialn Films Deposited Via Reactive Pulsed Dc Magnetron Sputteringinvestigation Of Deposition Parameters On Structural Properties And Hardness Of Tialn Films Deposited By Reactive Pulsed Dc Magnetron Sputtering, Jariyaporn Rukkun, Kamon Aiempanakit, Pimchanok Reakaukot, Witthawat Wongpisan, Kirati Waree, Montri Aiempanakit

Journal of Metals, Materials and Minerals

In this work, titanium aluminum nitride (TiAlN) films were deposited on a silicon substrate via reactive pulsed DC magnetron sputtering. The effect of deposition parameters such as nitrogen gas flow rate, substrate temperature, and bias voltage on the structural and mechanical properties of TiAlN films was investigated. The crystal structure, morphology, and hardness of TiAlN films were characterized via X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM, and nanoindentation. An improved crystallinity of TiAlN films was obtained by varying the substrate temperature and bias voltage. The morphology of the TiAlN film exhibited a columnar structure, and the morphology gradually …

Go to article

Electrochromic Property Of Tungsten Trioxide Films Prepared By Dc Magnetron Sputtering With Oblique Angle Deposition And Thermal Oxidation, Chantana Aiempanakit, Areeya Chanachai, Nattaya Kanchai, Montri Aiempanaki, Kamon Aiempanakit Jan 2021

Electrochromic Property Of Tungsten Trioxide Films Prepared By Dc Magnetron Sputtering With Oblique Angle Deposition And Thermal Oxidation, Chantana Aiempanakit, Areeya Chanachai, Nattaya Kanchai, Montri Aiempanaki, Kamon Aiempanakit

Journal of Metals, Materials and Minerals

In this work, WO3 thin films were prepared in two steps: First, tungsten (W) films with thickness of 100-300 nm were deposited by DC magnetron sputtering with oblique angle deposition (OAD) technique at 0 and 85. Second, sputtered W films were annealed under air atmosphere at a temperature of 500℃ and different oxidation times for 1-3 h. The structure of WO3 thin films were examined by X-ray diffraction and field emission scanning electron microscope. In addition, the optical and electrochromic properties of the WO3 thin films were measured by a spectrophotometer before and after testing in potassium hydroxide electrolytes. The …

Go to article

Improving Corrosion Resistance Of 3d Printed Ti-6al-4v By Tin Coating, Surada Nisaimun, Phitsanu Poolcharuansin, Patama Visuttipitukul, Pitichon Klomjit Jan 2021

Improving Corrosion Resistance Of 3d Printed Ti-6al-4v By Tin Coating, Surada Nisaimun, Phitsanu Poolcharuansin, Patama Visuttipitukul, Pitichon Klomjit

Journal of Metals, Materials and Minerals

TiN thin films were deposited on biomaterial 3D printed Ti-6Al-4V substrates using two methods including direct current magnetron sputtering (DCMS) and high-power impulse magnetron sputtering (HiPIMS). The coating times were compared between 5 min and 25 min. HiPIMS was developed based on DCMS by increasing degree of ionization in plasma and power densities in the order of kWcm-2 compared to Wcm-2 of DCMS. The film characteristics and mechanical properties were investigated by glancing incident x-ray diffractometer (GIXRD), field emission scanning electron microscope (FE-SEM), and atomic force microscope (AFM). Electrochemical behavior was analyzed by electrochemical impedance spectroscopy (EIS) in 1 M …

Go to article

Improvement Of Alkali Resistance Of Glass Fiber From Basalt And Lignite Bottom Ash Mixture By Addition Of Zro2 Content, Apirat Theerapapvisetpong, Phraethong Kwanpanngam, Thanapat Tamrongwongwi Jan 2021

Improvement Of Alkali Resistance Of Glass Fiber From Basalt And Lignite Bottom Ash Mixture By Addition Of Zro2 Content, Apirat Theerapapvisetpong, Phraethong Kwanpanngam, Thanapat Tamrongwongwi

Journal of Metals, Materials and Minerals

No abstract provided.

Go to article

New Views On The Ingenious Applications Of Ag Nanoparticles As A Sensor For Antibiotic Detection And As A Potent Antimicrobial Agent, Keyur Bhatt, Anita Kongor, Mohd Atharb, Vinod Jain Jan 2021

New Views On The Ingenious Applications Of Ag Nanoparticles As A Sensor For Antibiotic Detection And As A Potent Antimicrobial Agent, Keyur Bhatt, Anita Kongor, Mohd Atharb, Vinod Jain

Journal of Metals, Materials and Minerals

Nanotechnology uses exceptional approaches for the control of bacterial infections which uncovers the potential function of bio-systems at nano-scale level. Compared to silver ions, silver nanoparticles possess enhanced physicochemical stability and low bio-toxicity properties. The intrinsic chemical framework of silver nanoparticles is prone to exhibit a significant chemistry when used as sensor and as therapeutic. Nowadays, silver is used in (nano-) medicine, in the form of nanoparticles to optimize its therapeutic property for controlling infections caused by multidrug-resistant bacteria. Exclusive use of antibiotics as medicines and its discharge from the body of the infected person or animals into the sewage …

Go to article

Effect Of Zinc-Hydroxo Species On The Growth Of One-Dimensional Zno Nanostructures, Nontakoch Siriphongsapak, Somyod Denchitcharoen Jan 2021

Effect Of Zinc-Hydroxo Species On The Growth Of One-Dimensional Zno Nanostructures, Nontakoch Siriphongsapak, Somyod Denchitcharoen

Journal of Metals, Materials and Minerals

One-dimensional ZnO nanostructures were grown on ZnO seed layer by hydrothermal method using zinc nitrate (Zn(NO3)2) and sodium hydroxide (NaOH) as precursors. The concentrations of NaOH and Zn(NO3)2 were varied from 40 mM to 680 mM and kept constant, respectively. Effects of increasing the hydroxide ions on the concentration of zinc-hydroxo species in the solution were studied using thermodynamic simulation software. The simulated results showed that Zn(OH)2 and Zn(OH)3- concentrations tended to decrease but Zn(OH)42- was non-linearly increased when the concentration of NaOH at room temperature was increased. After the growth of ZnO, the samples were characterized by FESEM and …

Go to article

Development And Characterization Of Sic Fiber Reinforced B4c Composite, Jitendra Kumar Sonber, Sanjib Majumdar, Vivekanand Kain Jan 2021

Development And Characterization Of Sic Fiber Reinforced B4c Composite, Jitendra Kumar Sonber, Sanjib Majumdar, Vivekanand Kain

Journal of Metals, Materials and Minerals

This study is conducted to investigate the effects of silicon carbide short fiber (SiCf) reinforcement on processing and properties of boron carbide ceramic. Studies have been carried out on the hot pressing, mechanical property measurement, microstructure evolution and oxidation study of SiCf reinforced B4C composite. B4C-SiCf composites have been prepared by hot pressing at 1950℃ with varying SiCf content in the range of 10 vol% to 30 vol%. All the composites are densified to near theoretical density. It is noticed that hardness of composite is decreased and fracture toughness of composite is increased by addition of SiC fiber. Hardness of …

Go to article

Wollastonite And Talc Reinforced Polypropylene Hybrid Composites: Mechanical, Morphological And Thermal Properties, Naruedee Putfak, Amnouy Larpkasemsuk Jan 2021

Wollastonite And Talc Reinforced Polypropylene Hybrid Composites: Mechanical, Morphological And Thermal Properties, Naruedee Putfak, Amnouy Larpkasemsuk

Journal of Metals, Materials and Minerals

This study focused on evaluating the mechanical, thermal, and morphological properties of polypropylene (PP) hybrid composites containing two different inorganic mineral fillers, namely wollastonite (WO) and talc. The composites were prepared by melt mixing process using a twin screw extruder and an injection molding machine. All composites contained a constant filler loading at 20 wt% with varying WO/talc weight ratios (20/0, 15/5, 10/10, 5/15, and 0/20). Melt flow index (MFI), mechanical properties (impact strength and tensile properties), heat distortion temperature (HDT) fractured surface morphology, and thermal behaviors of the resulting composites were investigated. The results revealed an enhancement in the …

Go to article

Facile Purification Of Locally Mined Gypsum And Its Use For Preparing Nano-Hemihydrates, Luqman Ayodeji Adams, Enobong Essien, Taiwo Aiyeloro, Stella Oseyomon, John Makanjuola Jan 2021

Facile Purification Of Locally Mined Gypsum And Its Use For Preparing Nano-Hemihydrates, Luqman Ayodeji Adams, Enobong Essien, Taiwo Aiyeloro, Stella Oseyomon, John Makanjuola

Journal of Metals, Materials and Minerals

Gypsum has a wide range of applications, in interior decorations, building construction, supplements or implants in orthopaedics to mention a few. However, in many developing countries including Nigeria, there is still a large-scale importation despite huge available natural deposits. In this study, a facile method to purify locally-mined gypsum has been explored based on the mineral retrograde solubility in water. The purified gypsum was investigated for its elemental composition in comparison to the crude sample and a commercially obtained medical-grade gypsum using X-ray fluorescence (XRF). The results showed that the purified gypsum contained 94.05% CaSO4 compared with the crude which …

Go to article

Efficiency Of 2-Dodecylaminopyridine For The Liquid-Liquid Extraction Of Gold(Iii) From Succinic Acid Medium, Umrao Shep, Rucha Pawar, Balasaheb Arbad Jan 2021

Efficiency Of 2-Dodecylaminopyridine For The Liquid-Liquid Extraction Of Gold(Iii) From Succinic Acid Medium, Umrao Shep, Rucha Pawar, Balasaheb Arbad

Journal of Metals, Materials and Minerals

Extractive recovery of gold(III) from succinic acid solution with high molecular weight amine: 2-dodecylaminopyridine (2-DDAP) as a new extractant in xylene has been investigated. Extraction data indicates that 5 × 10-4 mol⋅L-1 2-DDAP is a very efficient and fast extractant. Gold(III) can be effectively extracted (D = 414.16) with 2-DDAP from 0.04 M succinic acid solution. The equilibrium of gold(III) from aqueous phase of succinic acid with 2-DDAP is achieved within 60 sec. The extraction of gold(III) with 2-DDAP proceed at the interface according to ion pair formation mechanism. The best stripping solution from among the studied ones is the …

Go to article

Effect Of Dc Power On The Thickness, Hardness And Adhesion Strength Of Ti-51 At% Ni Coated Ti/Tin, Ishiaka Shaibu Arudi, Esah Hamzah, Muhammad Azizi Mat Yajid, Bushroa Abdul Razak Jan 2021

Effect Of Dc Power On The Thickness, Hardness And Adhesion Strength Of Ti-51 At% Ni Coated Ti/Tin, Ishiaka Shaibu Arudi, Esah Hamzah, Muhammad Azizi Mat Yajid, Bushroa Abdul Razak

Journal of Metals, Materials and Minerals

The coating of Ti/TiN was successfully deposited on Ti-51 at% Ni substrates by using direct current (DC) magnetron sputtering technique and the effect of different sputtering power on the thickness, surface hardness and adhesion strength of the coatings were studied. The microstructural characterization was carried out using scanning electron microscope (SEM), energy-dispersive X-ray (EDX) and X-ray diffractometer (XRD). The coating thicknesses were detected and measured using SEM. The surface hardness test was performed using microhardness tester, and the adhesion strength was carried out by scratch testing. The results showed that the TiN crystallites growth orientation, thickness, surface hardness and adhesion …

Go to article

Developments Of Biodegradable Polymer Based On Polylactic Acid (Pla) With Natural Color Extracts For Packaging Film Applications, Worraphol Nansu, Passarawan Chaiwut, Sukunya Ross, Gareth Ross, Nungruthai Suphrom, Sararat Mahasaranon Jan 2021

Developments Of Biodegradable Polymer Based On Polylactic Acid (Pla) With Natural Color Extracts For Packaging Film Applications, Worraphol Nansu, Passarawan Chaiwut, Sukunya Ross, Gareth Ross, Nungruthai Suphrom, Sararat Mahasaranon

Journal of Metals, Materials and Minerals

This research was interested in the use of natural colorants to replace hazardous synthetic pigments in the plastic polymer industry. The natural colors were selected from local plants indigenous to southeast Asia, which were Hibiscus sabdariffa roselle calyx (RS) and Caesapinia sappan Linn heartwood (SP). Natural colorant extracts were used as additives in poly(lactic acid ) (PLA). These were manufactured using a twin screws extruder and blow film extruder to obtain biodegradable thin films for use as packaging materials. Biodegradable films were characterized by color index, light barrier properties, water vapor transmission (WVTR), morphology, mechanical and chemical properties. The results …

Go to article

Effects Of Delay Time And Curing Temperature On Compressive Strength And Porosity Of Ground Bottom Ash Geopolymer Mortar, Nattapong Makaratat, Sumrerng Rukzon, Prinya Chindaprasirt Jan 2021

Effects Of Delay Time And Curing Temperature On Compressive Strength And Porosity Of Ground Bottom Ash Geopolymer Mortar, Nattapong Makaratat, Sumrerng Rukzon, Prinya Chindaprasirt

Journal of Metals, Materials and Minerals

This research investigated development of ground bottom ash (GBA) for a new geopolymer material. The compressive strength and porosity of the geopolymer mortar containing GBA were tested. The GBA-based geopolymer mortar mixtures were designed by control liquid to GBA ratio for all tests. Extra water was also used to maintain the workability of geopolymer mortar. The sodium hydroxide (NaOH) concentrations of 10 M and 15 M were used. Furthermore, sodium silicate (Na2SiO3) to sodium hydroxide (NaOH) ratios by mass such as 0.50, 1.50 and 2.50 were also used as alkali activator solutions. Effects of delay time and no-delay time, heat …

Go to article

Characteristic Of Fluorescence Spectroscopy Response Of Tetrakis (4-Sulfonatophenyl) Porphyrin Doped Polyaniline Toward Fe3+ Ion, Chatr Panithipongwut Kowalsk, Meatawadee Buntee, Prasit Pattananuwat Jan 2021

Characteristic Of Fluorescence Spectroscopy Response Of Tetrakis (4-Sulfonatophenyl) Porphyrin Doped Polyaniline Toward Fe3+ Ion, Chatr Panithipongwut Kowalsk, Meatawadee Buntee, Prasit Pattananuwat

Journal of Metals, Materials and Minerals

Here, we report a selective colorimetric chemosensor toward Fe3+ ion detection by the combination of sensitizer and hole transport consisting of polyaniline and tetrakis (4-sulfonatophenyl) porphyrin. Interestingly, the presence of tetrakis (4-sulfonatophenyl) porphyrin moiety on polyaniline can enhance the optical limiting properties of polyaniline, allowing the fluorophore signal for chemical sensor. The performance sensing behaviors toward metal ion are observed by the ultraviolet-Visible and fluorescence properties. The sensing of polyaniline-tetrakis (4-sulfonatophenyl) porphyrin toward Fe3+ ion exhibits a linear response in the concentration range of 0.01 M to 1.0 × 10-4 M over the other transition metals (Cu2+, Ni2+, Zn2+, Pb2+, …

Go to article

A Review Of Rice Husk Silica As A Heterogeneous Catalyst Support, Izzati Nasir, Nadiah Ameram, Arlina Ali, Siti Roshayu Hassan, Nurul Akmar Che Zaudin, Jamil Mohamed Sapari Jan 2021

A Review Of Rice Husk Silica As A Heterogeneous Catalyst Support, Izzati Nasir, Nadiah Ameram, Arlina Ali, Siti Roshayu Hassan, Nurul Akmar Che Zaudin, Jamil Mohamed Sapari

Journal of Metals, Materials and Minerals

The yield of amorphous silica has less residue of mineral content in rice husk (RH) and a high specific surface area through the simple alkaline extraction process at first, then acid precipitation of RH. At this time, the leaching process using alkali and calcination of RH is the best method to acquire amorphous silica with a high surface area. The different temperatures were used for the calcination of RH and continue with sodium hydroxide (NaOH) treatment by using different concentration. The sample titrated using hydrochloric acid (HCl) to extract silica. Pretreatment with acid leaching for the RH was also conducted …

Go to article

Enhanced Mechanical And Thermal Properties Of Fly Ash-Based Geopolymer Composites By Wollastonite Reinforcement, Khanthima Hemra, Takaomi Kobayashi, Pavadee Aungkavattana, Sirithan Jiemsirilers Jan 2021

Enhanced Mechanical And Thermal Properties Of Fly Ash-Based Geopolymer Composites By Wollastonite Reinforcement, Khanthima Hemra, Takaomi Kobayashi, Pavadee Aungkavattana, Sirithan Jiemsirilers

Journal of Metals, Materials and Minerals

The present study investigated the mechanical and thermal properties of geopolymer composite. The geopolymer composite was prepared by mixing fly ash and wollastonite with the alkaline activator, which was 6 M KOH:K2SiO3 in a mass ratio of 1:1 and a solid:liquid mass ratio of 3:2. The compressive strength at 28 days of geopolymer was 33.3 MPa and possessed the highest strength of 38.3 MPa when 30 wt% wollastonite was added. The flexural strength presented differently whereby it increased from 2.1 MPa to 6.8 MPa. It increased remarkably up to 200% with the addition of 50 wt% wollastonite. The geopolymer composites …

Go to article

Effect Of Nitrocarburizing And Argon Admixing On Low Carbon Steel For Component Facility In Radiometallurgical Installation, Erwan Hermawan, Suprapto Suprapto, Usman Sudjadi, Siti Shaleha, Maman Kartaman Ajiriyanto Jan 2021

Effect Of Nitrocarburizing And Argon Admixing On Low Carbon Steel For Component Facility In Radiometallurgical Installation, Erwan Hermawan, Suprapto Suprapto, Usman Sudjadi, Siti Shaleha, Maman Kartaman Ajiriyanto

Journal of Metals, Materials and Minerals

Steel is an important component in the industrialized world with rising growth in world consumption. Steel has wide applications due to its high strength, durability, and cost-effectiveness. This has applications in the nuclear power plant. In Indonesian nuclear industry, low carbon steel is used not only for the fabrication of reactor components but also for the radiometallurgical facilities. However, to avoid the risk of premature failure and enhance the longevity of the components in the service condition, surface modification for the improvement of hardness has been realized. Amongst several methods, surface hardening by following nitrocarburizing has been found to be …

Go to article

Raman Signal Enhancement Of Low-Cost Metal Sheet Sers With Gold Decoration, Nampueng Pangpaiboon, Kawinphob Phetnam, Sukon Kalasung, Chanunthorn Chananonawathorn, Viyapol Patthanasettakul, Mati Horprathum, Pitak Eiamchai, Noppadon Nuntawong, Saksorn Limwichean Jan 2021

Raman Signal Enhancement Of Low-Cost Metal Sheet Sers With Gold Decoration, Nampueng Pangpaiboon, Kawinphob Phetnam, Sukon Kalasung, Chanunthorn Chananonawathorn, Viyapol Patthanasettakul, Mati Horprathum, Pitak Eiamchai, Noppadon Nuntawong, Saksorn Limwichean

Journal of Metals, Materials and Minerals

Surface Enhance Raman Spectroscopy (SERS) is a sensitive surface creating plasmonic resonance for the Raman scattering. SERS is considered as a powerful technique to enhance the Raman signal, when quantity of sample is limited. Recently, our lab team has discovered a low-cost SERS template fabrication, laser-engraving method, which is suitable with gold nanoparticles decoration. In this work, two different materials, zinc and copper, are used as metal sheet SERS substrate. Gold nanoparticles sputtered with 270 s of sputtering time are used as decorated noble metal. FE-SEM images illustrate the nano-in-microstructure of the engraved metal sheets. The decorated Au nanoparticles are …

Go to article

First Prev Next Last