Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2941 - 2970 of 16776

Full-Text Articles in Materials Science and Engineering

The Combustion Characteristics Of Calophyllum Inophyllum Fuel In The Presence Of Magnetic Field, Imam Rudi Sugara, Nasrul Ilminnafik, Salahuddin Junus, Muh Nurkoyim Kustanto, Yuni Hermawan Jul 2023

The Combustion Characteristics Of Calophyllum Inophyllum Fuel In The Presence Of Magnetic Field, Imam Rudi Sugara, Nasrul Ilminnafik, Salahuddin Junus, Muh Nurkoyim Kustanto, Yuni Hermawan

Journal of Mechanical Engineering Science and Technology (JMEST)

The study objective is to investigate the combustion characteristics of Callophyllum inophyllum fuel in presence of a magnetic fields. To conduct the experiment, a bunsen burner was utilized, with fuel and air being dispensed via a syringe pump and compressor, both regulated by a flowmeter. The fuel and air pipes were heated to 532.15 (K) to facilitate fuel evaporation. The equivalent ratio of 0.5, 1, and 1.5 was adjusted to control air discharge and fuel. An 11,000 gausses artificial magnet was used, with N-S, N-S, N-N, and SS being the various magnetic pole configurations. The study found that the magnetic …

Go to article

Lap Joint On St.37 Steel Plate With Friction Welding Clamping Method, Widia Setiawan, Nugroho Santoso, Wiyadi Wiyadi, Muhammad Sulistiyo Aji, Rachmat Alamin, Achsan Tarmudi Jul 2023

Lap Joint On St.37 Steel Plate With Friction Welding Clamping Method, Widia Setiawan, Nugroho Santoso, Wiyadi Wiyadi, Muhammad Sulistiyo Aji, Rachmat Alamin, Achsan Tarmudi

Journal of Mechanical Engineering Science and Technology (JMEST)

Friction stir (FW) welding is a relatively fresh method that was created and has been continually refined and adapted to industrial applications due to its benefits. This approach for solid-state joining entails connecting the components at a temperature below their melting point and then heating them up. Clamp joint applications are widely used using external heating and hitting with high strength, but the clamped joints with the FW method are rarely done. The research studied the characteristic of clamped joints at various plate thicknesses using the FW method. In this study, 30 specimens were used in the form of a …

Go to article

Mechanical Properties Of Biocomposite With Various Composition Of Caco3 And Starch, Agris Setiawan, Fransisca Diana Wahyuningsih, Riria Zendy Mirahati Jul 2023

Mechanical Properties Of Biocomposite With Various Composition Of Caco3 And Starch, Agris Setiawan, Fransisca Diana Wahyuningsih, Riria Zendy Mirahati

Journal of Mechanical Engineering Science and Technology (JMEST)

Calcium carbonate has the potential to be used in the development of medical materials, including biomaterials. Biocomposite is composed of CaCO3 as matrix material and bioplastic from the combination of corn starch and cassava starch as reinforcement. This study aims to determine mechanical properties such as tensile strength and bending/flexural strength with varying compositions of CaCO3 and bioplastic. Characterization of the biocomposite uses Scanning Electron Microscope to observe the microstructure and composition elements of their structure. This study used 4 variations in the ratio of CaCO3 suspension: (Corn Starch + Cassava Starch). Each sample was characterized using specimen code A …

Go to article

Effect Of Temperature Variations Of Corn (Maize) Oil Biodiesel On Torque Values And Thermal Efficiency Of Diesel Engines, Suardi Suardi, Rodlian Jamal Ikhwani, Ade Putri Rezki Aulia Jul 2023

Effect Of Temperature Variations Of Corn (Maize) Oil Biodiesel On Torque Values And Thermal Efficiency Of Diesel Engines, Suardi Suardi, Rodlian Jamal Ikhwani, Ade Putri Rezki Aulia

Journal of Mechanical Engineering Science and Technology (JMEST)

The trend of consumption of hydrocarbon fuels in Indonesia, which is increasing every year, is not accompanied by the amount of production, which is decreasing. Alternative fuels to reduce dependence on hydrocarbon fuels. One form of alternative fuel is biodiesel, which is made from corn (maize) oil. Corn oil itself, if processed, can be an option for clean and environmentally friendly energy option and that is the main objective of this research is to determine the performance of biodiesel corn oil on diesel engines. The method used in this study is an experimental method where corn oil biodiesel is tested …

Go to article

Analysis Of Fire And Smoke Spread In Ki Hajar Dewantara Auditorium, State University Of Jakarta, Using Fire Dynamics Simulator, Pratomo Setyadi, Ariq Harits Arrizq Jul 2023

Analysis Of Fire And Smoke Spread In Ki Hajar Dewantara Auditorium, State University Of Jakarta, Using Fire Dynamics Simulator, Pratomo Setyadi, Ariq Harits Arrizq

Journal of Mechanical Engineering Science and Technology (JMEST)

Fire behavior and smoke spread are influenced by various factors, including the amount and condition of combustible material, ventilation openings, and ceiling height. A high amount of combustible material in the auditorium poses a significant fire hazard, hence, efforts need to be made to minimize the risk. One approach is to use Computational Fluid Dynamic software, such as Fire Dynamics Simulator (FDS), to model fire combustion. In this research, it provides an overview of the heat release rate (HRR) of fires that occur as well as the effect of differences in ceiling height and the effect of ventilation on fire …

Go to article

Effect Of Grafting Nano-Tio2 On Sansevieria Cylindrica Fiber Properties, Chrisrulita Sekaradi Wiguna, Heru Suryanto, Aminuddin Aminuddin, Jibril Maulana, Joseph Selvi Binoj, Alamry Ali Jul 2023

Effect Of Grafting Nano-Tio2 On Sansevieria Cylindrica Fiber Properties, Chrisrulita Sekaradi Wiguna, Heru Suryanto, Aminuddin Aminuddin, Jibril Maulana, Joseph Selvi Binoj, Alamry Ali

Journal of Mechanical Engineering Science and Technology (JMEST)

Natural fibers, which are abundant, environmentally friendly, and biodegradable, are used as a replacement for synthetic fibers. The composite strength can be increased by treating the surfaces of natural fibers with suitable chemicals, which can also improve the interface interaction between fiber and matrix. Application of a coupling agent in chemical treatment is utilized to reinforce the bonding between fiber and matrix. The objective of the study is to determine the influence of silane concentration on the Sansevieria cylindrica fiber properties. The methods included fibers treatment using ethanol and coupling agent as dissolving and TiO2 with concentrations of 0%, 0.25%, …

Go to article

Effect Of Current And Pulse-On Time On Material Removal Rate And Surface Roughness Of Tungsten Carbide In Electric Discharge Machine Die-Sinking, Mochamad Deny Riyanto, Andoko Andoko, Heru Suryanto Jul 2023

Effect Of Current And Pulse-On Time On Material Removal Rate And Surface Roughness Of Tungsten Carbide In Electric Discharge Machine Die-Sinking, Mochamad Deny Riyanto, Andoko Andoko, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

The focus of manufacturing for tungsten carbide applications often demands a smooth surface quality as the result of the Electric Discharge Machine (EDM) die-sinking process, especially in the manufacture of die and mold with tungsten carbide material processed using a die-sinking EDM machine. The purpose of this study is to analyze the effect of electric current and pulse-on time on the Material Removal Rate (MRR) and surface roughness of tungsten carbide. Through the experimental method, the parameters varied, namely electric current 17 A, 20 A, 23 A, and pulse-on time 30 µs, 55 µs, and 80 µs. MRR was calculated …

Go to article

The Effect Of Cutting Speed Of Nitrogen Laser Cutting On The Surface Texture Of Sus 304 Plate, Yanuar Rohmat Aji Pradana, Raka Afrianto, Chandra Hairat Abdul Rahman, Andoko Andoko Jul 2023

The Effect Of Cutting Speed Of Nitrogen Laser Cutting On The Surface Texture Of Sus 304 Plate, Yanuar Rohmat Aji Pradana, Raka Afrianto, Chandra Hairat Abdul Rahman, Andoko Andoko

Journal of Mechanical Engineering Science and Technology (JMEST)

The focus of today’s machining industry is on how to maintain high productivity and low cost achieved by high tool life during the operation. Laser cutting is considered the right solution because it offers cutting speeds of up to 170000 mm/min through a non-contact process regardless of the workpiece material hardness. The aim of this study is to analyze the effect of cutting speed on the surface texture aspects namely surface roughness, kerf shape, and dross height on the stainless steel 304 plate after laser cutting. The nitrogen laser was utilized with the cutting speed of 400, 1700, and 2000 …

Go to article

Molybdenum Disulfide (Mos₂) As A Nanocellulose Substrate, Mariana Torres, Dylan Seiffert, Elise Hong-Miller, T. E. Kidd Jul 2023

Molybdenum Disulfide (Mos₂) As A Nanocellulose Substrate, Mariana Torres, Dylan Seiffert, Elise Hong-Miller, T. E. Kidd

Summer Undergraduate Research Program (SURP) Symposium

Cellulose is a substance abundant in nature, found in fruits and vegetables, plant cell walls (National Center for Biotechnology Information, 2023), and wood (Sjostrom, 1993). The abundance of cellulose is attributable to its linear chemical structure, as it is composed of long strands of glucose molecules linked together by hydrogen atoms, which enable the substance to withstand significant pressure without breaking (Rongpipi et al., 2019). This property—known as high tensile strength—is joined by its non-toxicity and sustainability, given cellulose may be degraded and renewed naturally (Kaur, 2021). These various properties indicate versatility, and its resultant current and desired uses—such as …

Go to article

Flow Through Processing Of Nanocellulose For Space Exploration Applications, Dylan Seiffert, T. E. Kidd Jul 2023

Flow Through Processing Of Nanocellulose For Space Exploration Applications, Dylan Seiffert, T. E. Kidd

Summer Undergraduate Research Program (SURP) Symposium

Nanocellulose is synthesized from cellulose, which is the most abundant organic molecule found in nature. Nanocellulose solids are biodegradable and have a strength-to-weight ratio eight times that of steel1. The production of nanocellulose solids is challenging due to the large volume loss that occurs during the curing process as well as the time and cost associated with ultrasonic processing. The loss of volume during curing often results in cracking and deformation of the cured solid. The issues caused by the large volume loss can be mitigated using additives that do not compromise the strength, shape, or machineability of …

Go to article

Impacts And Applications Of Vegetable Glycerin On Nanocellulose, Elise Hong-Miller, Dylan Seiffert, T. E. Kidd Jul 2023

Impacts And Applications Of Vegetable Glycerin On Nanocellulose, Elise Hong-Miller, Dylan Seiffert, T. E. Kidd

Summer Undergraduate Research Program (SURP) Symposium

Nanocellulose is created by breaking down cellulose, the most common organic molecule found in nature. Nanocellulose has attractive properties, such as a very high strength-to-weight ratio, for many different applications. A major challenge is that nanocellulose has a very high shrinkage % (~90%) when it is dried, as well as a strong probability to crack. Different additives can be added in varying amounts to either mitigate or intensify these aspects, as well as affect its drying conditions. This investigation is helping the National Aeronautics and Space Administration (NASA) and the U.S. Army to find a use for this highly renewable …

Go to article

Recent Progress Of Bifunctional Electrocatalysts For Oxygen Electrodes In Unitized Regenerative Fuel Cells, Tian-Long Zheng, Ming-Yu Ou, Song Xu, Xin-Biao Mao, Shi-Yi Wang, Qing-Gang He Jul 2023

Recent Progress Of Bifunctional Electrocatalysts For Oxygen Electrodes In Unitized Regenerative Fuel Cells, Tian-Long Zheng, Ming-Yu Ou, Song Xu, Xin-Biao Mao, Shi-Yi Wang, Qing-Gang He

Journal of Electrochemistry

Unitized regenerative fuel cells (URFCs), which oxidize hydrogen to water to generate electrical power under thefuel cells (FCs) mode and electrolyze water to hydrogen under the water electrolysis (WE) mode for recycling, areknown as clean and sustainable energy conversion devices. In contrast to the hydrogen oxidation reaction (HOR) andhydrogen evolution reaction (HER) on the hydrogen electrode side, the sluggish kinetics of oxygen reduction reaction(ORR) and oxygen evolution reaction (OER) on the oxygen electrode side requires highly efficient bifunctional oxygencatalysts. Conventional precious metal oxygen catalysts combine Pt and IrO2 with excellent ORR and OER activities toachieve bifunctional electrocatalysis performance, but …

Go to article

Ultramicroelectrode Experiments: Principles, Fabrications And Voltmmetric Behaviors, Zhen Ma, Jia-Yang Lin, Wen-Jing Nan, Lian-Huan Han, Dong-Ping Zhan Jul 2023

Ultramicroelectrode Experiments: Principles, Fabrications And Voltmmetric Behaviors, Zhen Ma, Jia-Yang Lin, Wen-Jing Nan, Lian-Huan Han, Dong-Ping Zhan

Journal of Electrochemistry

Due to the small size at least in one dimension (< 25 μm), ultramicroelectrode (UME) has small electric-double-layer capacitance, low IR drop, rapid mass transfer rate, fast response, high signal/noise ratio and high spatiotenporal resolution. UME is qualified not only to study the kinetics of fast electrode processes, but also to act as the probe of scanning electrochemical microscopies to obtain the localized chemical or electrochemical reactivity of the substrates. Thus, UMEs play a significant role in various research domains of electrochemistry, and have become an important electrochemical experimental method. Herein, we will introduce the basic principles, a simple fabrication method and voltammetric experimental protocols of UME, providing a guide to carry out the UME experiments.

Go to article

Band Alignments Of Metal/Oxides-Water Interfaces Using Ab Initio Molecular Dynamics, Yong-Bin Zhuang, Jun Cheng Jul 2023

Band Alignments Of Metal/Oxides-Water Interfaces Using Ab Initio Molecular Dynamics, Yong-Bin Zhuang, Jun Cheng

Journal of Electrochemistry

Band alignments of electrode-water interfaces are of crucial importance for understanding electrochemical interfaces. In the scenario of electrocatalysis, applied potentials are equivalent to the Fermi levels of metals in the electrochemical cells; in the scenario of photo(electro)catalysis, semiconducting oxides under illumination have chemical reactivities toward redox reactions if the redox potentials of the reactions straddle the conduction band minimums (CBMs) or valence band maximums (VBMs) of the oxides. Computational band alignments allow us to obtain the Fermi level of metals, as well as the CBM and VBM of semiconducting oxides with respect to reference electrodes. In this tutorial, we describe …

Go to article

Electrochemical Scanning Tunneling Microscopy: Taking The Initial Stage Of Cu Electrodeposition On Au(111) As An Example, Zhuo Tan, Kai-Xuan Li, Bing-Wei Mao, Jia-Wei Yan Jul 2023

Electrochemical Scanning Tunneling Microscopy: Taking The Initial Stage Of Cu Electrodeposition On Au(111) As An Example, Zhuo Tan, Kai-Xuan Li, Bing-Wei Mao, Jia-Wei Yan

Journal of Electrochemistry

Electrochemical scanning tunneling microscopy (ECSTM) plays an important role in the field of electrochemistry, which can obtain potential-dependent structural information of electrode surface with high spatial resolution and observe some reaction processes in electrolyte solutions, and provide a powerful way to understand the interfacial structure and electrode processes from the perspective of high spatial resolution. In this article, the study of electrodeposition of Cu on Au (111) by ECSTM is taken as an example to introduce the experimental methods required for ECSTM and share our experience with other electrochemical groups. Firstly, the working principle of STM is introduced so that …

Go to article

62nd Annual Rocky Mountain Conference On Magnetic Resonance Jul 2023

62nd Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 62nd annual meeting of the Rocky Mountain Conference on Magnetic Resonance, co-endorsed by the Colorado Section of the American Chemical Society and the Society for Applied Spectroscopy. Held in Sonesta Denver Downtown, Denver, Colorado, July 23-27, 2023.

Go to article

Exfoliation And Spray Deposition Of Graphene Nanoplatelets In Ethyl Acetate And Acetone: Implications For Additive Manufacturing Of Low-Cost Electrodes And Heat Sinks, Muhammed Ramazan Oduncu, Zhifan Ke, Bingyuan Zhao, Zhongxia Shang, Robin Simpson, Haiyan Wang, Alexander Wei Jul 2023

Exfoliation And Spray Deposition Of Graphene Nanoplatelets In Ethyl Acetate And Acetone: Implications For Additive Manufacturing Of Low-Cost Electrodes And Heat Sinks, Muhammed Ramazan Oduncu, Zhifan Ke, Bingyuan Zhao, Zhongxia Shang, Robin Simpson, Haiyan Wang, Alexander Wei

Department of Chemistry Faculty Publications

Nonaqueous dispersions of graphene nanoplatelets (GrNPs) can be used to prepare thin films and coatings free of surfactants, but typically involve polar organic solvents with high boiling points and low exposure limits. Here, we describe the mechanochemical exfoliation and dispersion of GrNPs in volatile aprotic solvents such as ethyl acetate (EtOAc) and acetone, which rank favorably in green solvent selection guides. GrNPs in powder form were exfoliated with a solvent on a horizontal ball mill for 48 h and then sonicated at moderate power to produce suspensions in excess of 300 μg/mL with minimum loss of dispersion stability over 7 …

Go to article

Research Progress On Properties Of Fiber Modified Asphalt Mixture, Liang Bo, Zhang Haitao, Liu Zheng, Liao Wei Jul 2023

Research Progress On Properties Of Fiber Modified Asphalt Mixture, Liang Bo, Zhang Haitao, Liu Zheng, Liao Wei

Journal of China & Foreign Highway

As a kind of asphalt mixture additive and stabilizer, fiber can effectively improve the performance index of asphalt pavement and extend the service life of asphalt pavement. Based on the analysis of relevant literature in China and abroad, this paper summarized the action mechanism of fiber modified asphalt and asphalt mixture, the effect of fiber content on properties, and the characteristics of different types of fiber modified asphalt. Fiber can effectively improve the high temperature property, low temperature property, and fatigue property of asphalt mixture, especially the resistance to low temperature and fatigue cracking of asphalt mixture. The modification effect …

Go to article

Review Of Research Progress Of Frame Beam Anchore D Structure In Slope Supporting, Zhang Junhui, Zhou Qinwei, Li Feng, Zhang Shiping Jul 2023

Review Of Research Progress Of Frame Beam Anchore D Structure In Slope Supporting, Zhang Junhui, Zhou Qinwei, Li Feng, Zhang Shiping

Journal of China & Foreign Highway

This paper summarized the research status of frame beam anchored structures in slope supporting and reinforcement engineering in China and abroad. It analyzed the results of structural design, model test, and field construction. Through induction and analysis, it is found that the current design of frame beam anchored structure has certain limitations, and it is necessary to form a universal design theory and method. The model test of frame beam anchored structure in slope supporting is limited by the test equipment and conditions and fails to be carried out on a large scale. The key points and standards of the …

Go to article

Numerical Analysis Of Structural Characteristics Of Prefabricated Ecological Grid Retaining Walls, Wang Xinquan, Zhu Cong, Huang Tianyuan, Diao Hongguo, Peng Xijian Jul 2023

Numerical Analysis Of Structural Characteristics Of Prefabricated Ecological Grid Retaining Walls, Wang Xinquan, Zhu Cong, Huang Tianyuan, Diao Hongguo, Peng Xijian

Journal of China & Foreign Highway

The retaining wall is a common slope protection structure. In view of the current insufficient greening and high prefabricated retaining walls, prefabricated ecological grid retaining walls with high construction efficiency and greening features emerge. In order to explore the mechanical characteristics and influencing factors of prefabricated ecological grid retaining walls, Abaqus finite element software was used to discuss the mechanical characteristics of prefabricated ecological grid retaining wall columns and inclined shelves with different embankment heights and different fillings. The results show that different fill heights have different effects on the lateral displacement of the column, and the effect of fill …

Go to article

Study On Effectiveness Evaluation Method Of Expressway Drainage System In Rainy Area, Luo Datian, Li Jiayi, Zou Jingrong Jul 2023

Study On Effectiveness Evaluation Method Of Expressway Drainage System In Rainy Area, Luo Datian, Li Jiayi, Zou Jingrong

Journal of China & Foreign Highway

In order to comprehensively evaluate the effectiveness of expressway drainage systems in rainy areas and comprehensively analyze the factors affecting the effectiveness of drainage systems, this paper took the perfection of drainage system, stability of drainage facilities, and road traffic safety as the first-level evaluation index and six kinds of influencing factors such as the degree of integrity as the second-level index, and it put forward the evaluation criteria of the effectiveness of expressway drainage system in rainy areas. The fuzzy comprehensive evaluation method was used to determine the membership degree of expert scoring through the trapezoid membership function, and …

Go to article

Macro And Micro Analysis Of Influence Mechanism Of Anti⁃Slide Pile Position On Slope Stability, Liu Ping, Wang Meijing, Zhang Shaoqiang, Zhang Yongsheng, Wang Denghua, Li Dongdong Jul 2023

Macro And Micro Analysis Of Influence Mechanism Of Anti⁃Slide Pile Position On Slope Stability, Liu Ping, Wang Meijing, Zhang Shaoqiang, Zhang Yongsheng, Wang Denghua, Li Dongdong

Journal of China & Foreign Highway

In order to study the influence mechanism of anti-slide pile position on the stability of the slope and optimize the supporting parameters of anti-slide piles reasonably, a three-dimensional continuous and discrete coupled numerical model of the slope was established based on the finite difference theory and discrete element theory of a highway cut slope in southwest China. The influence mechanism of anti-slide pile position on the stability of the cut slope was analyzed from macro and micro perspectives. The results show that the force chain of particles on the sliding surface is thin at the top and dense at the …

Go to article

Experimental Study On Interface Fatigue C Haracteristics Of Asphalt P Avement Pothole Patch Under External Factors, Ai Changfa, Shao Zhutao, Huang Yangquan, Ren Dongya Jul 2023

Experimental Study On Interface Fatigue C Haracteristics Of Asphalt P Avement Pothole Patch Under External Factors, Ai Changfa, Shao Zhutao, Huang Yangquan, Ren Dongya

Journal of China & Foreign Highway

After the asphalt pavement patch for potholes is put into use, the interface joints around it are prone to fatigue and durability problems under the action of external factors such as the natural environment and driving load effect. In order to analyze the fatigue characteristics of the repaired interface joints under the action of external factors, the four-point bending fatigue test and pull-out test, combined with the results of orthogonal analysis, were used to determine the best bonding scheme of the repaired interface. The influence of external factors such as temperature, frequency, and strain level on the fatigue life of …

Go to article

Study On Improvement Of Early Skid Resistance Of Sma Asphalt Pavement Based On Spreading Grit, Jiang Zhaowei, Wei Jincheng, Liu Hang, Sun Qiang, Li Xia Jul 2023

Study On Improvement Of Early Skid Resistance Of Sma Asphalt Pavement Based On Spreading Grit, Jiang Zhaowei, Wei Jincheng, Liu Hang, Sun Qiang, Li Xia

Journal of China & Foreign Highway

The early skid resistance of SMA 13 pavement is poor. To address this issue, the existing research results were analyzed, and physical detection was conducted. It was found that the large structure pavement failed to provide good early skid resistance detection value. Based on the principle of spreading abrasive materials, two methods to improve the early skid resistance of SMA pavement were proposed. The particle size of abrasive material was determined to be 2.36–4.75 mm, and the spreading amount was 0.82 kg/m2, which verified the safety of the methods. The test results show that the two methods can slightly improve …

Go to article

Crack Resistance Of Basalt Fiber Asphalt Pavement Under The Coupling Effect Of Low Temperature⁃Load In Heavy Freezing Area, Guo Yinchuan, Hao Chenwei, Guo Han, Fan Li, Shen Aiqin, Wang Lusheng Jul 2023

Crack Resistance Of Basalt Fiber Asphalt Pavement Under The Coupling Effect Of Low Temperature⁃Load In Heavy Freezing Area, Guo Yinchuan, Hao Chenwei, Guo Han, Fan Li, Shen Aiqin, Wang Lusheng

Journal of China & Foreign Highway

In view of the cold working environment and road diseases of asphalt pavement in the heavy freezing area of Inner Mongolia, a control index of pavement structure based on crack resistance was proposed. The calculation models of the newly built basalt fiber asphalt pavement structure and the pavement after cracks were established by using Ansys finite element software. The mechanical parameters, thermophysical parameters, and other parameters of the basalt fiber asphalt pavement were determined through laboratory tests, and the crack resistance indexes under the coupling action of low temperature and load were calculated, respectively. The fatigue life of basalt fiber …

Go to article

Detailed Structure Of Double ⁃Layer Porous Asphalt Pavement Under Three Paving Technologies, Zhang Zhenshan, Liao Gongyun, Wang Can, Zhang Yi, Cai Yang, Fang Xin, Wu Wei Jul 2023

Detailed Structure Of Double ⁃Layer Porous Asphalt Pavement Under Three Paving Technologies, Zhang Zhenshan, Liao Gongyun, Wang Can, Zhang Yi, Cai Yang, Fang Xin, Wu Wei

Journal of China & Foreign Highway

For three kinds of construction technologies of double-layer drainage pavement (traditional “hot + cold” paving technology, “hot + warm” paving technology, and “hot + hot” integrated molding technology), the discrete element method and laboratory test were used to make plate specimens and cylindrical specimens, respectively, and the interlayer morphology of double-layer drainage pavement under the three kinds of construction technologies was compared. Based on the virtual shear test and laboratory direct shear test, the effects of construction technologies and amount of adhesive oil on the interlayer shear strength of double-layer drainage pavement were analyzed. By means of visualization, the distribution …

Go to article

Design And Stress Analysis Of Baqiutian Jointless Arch Br Idge In Yunnan, Chen Baochun, Sun Tongqing, Huang Qingwei, Han Yu, Shi Zhi Jul 2023

Design And Stress Analysis Of Baqiutian Jointless Arch Br Idge In Yunnan, Chen Baochun, Sun Tongqing, Huang Qingwei, Han Yu, Shi Zhi

Journal of China & Foreign Highway

The bridge without expansion joints, with the expansion device removed, can completely solve the maintenance problem of the expansion device and is sustainable. Its application is mainly in beam bridges and relatively few in arch bridges. In this paper, the Baqiutian Bridge in Yunnan Province was taken as an example, which is an upper bearing arch bridge. The arch path structure is directly connected with the two approach spans to form a continuous structure and extends to the guide plate (approach slab) behind the platform, thus eliminating the expansion joints of the whole bridge floor and making it an arch …

Go to article

Optimization Design Of Uhpc ⁃Nc Continuous Box Girder Bridge Based On Response Surface Method, Guan Weiyi, Duan Luqi Jul 2023

Optimization Design Of Uhpc ⁃Nc Continuous Box Girder Bridge Based On Response Surface Method, Guan Weiyi, Duan Luqi

Journal of China & Foreign Highway

In order to solve the two major problems of mid-span deflection and cracking in the late stage of the long-span bridge, a UHPC-NC hybrid beam design scheme was proposed, and some design parameters were optimized based on the response surface method. By optimizing the local parameters, namely the thickness of the roof, web, and bottom plates of the mid-span section, and the overall parameters, such as the UHPC replacement ratio, the number of beam curves, and the height of the mid-span beam, the optimal parameter combination was obtained as follows: roof thickness of 22 cm, web plate thickness of 25 …

Go to article

Analysis And Optimal Adjustment Of Manufacturing Errors Of Main Girder Of Long ⁃Span Steel Box Cable ⁃Stayed Bridge, Tu Guangya, Zhou Zhizhe Jul 2023

Analysis And Optimal Adjustment Of Manufacturing Errors Of Main Girder Of Long ⁃Span Steel Box Cable ⁃Stayed Bridge, Tu Guangya, Zhou Zhizhe

Journal of China & Foreign Highway

In order to study the influence of the random manufacturing error of the main girder permitted by the research specification on the alignment of the finished long-span steel box cable-stayed bridge, guided by the adaptive stress-free configuration construction control theory, the Shishou Yangtze River Highway Bridge, a long-span twin-tower cable-stayed bridge, was studied. The influence and propagation characteristics of the random error effect of the main girder members on the main structure of the cable-stayed bridge were analyzed. The adverse effects of random manufacturing errors of the main girder on the structure of the cable-stayed bridge were studied. The results …

Go to article

Research On Budget Quota Of Highway Bridge Crack Treatment, Chang Ding, Yu Licun Jul 2023

Research On Budget Quota Of Highway Bridge Crack Treatment, Chang Ding, Yu Licun

Journal of China & Foreign Highway

In view of the lack of a unified budget quota for concrete structure crack treatment, a large number of measured data and fuzzy analytic hierarchy process were used to calculate the consumption of budget quota through the amplitude difference coefficient of construction quota. According to the technical specifications of highway bridge reinforcement engineering, reasonable crack treatment methods and engineering contents were determined, and the quota of structure crack treatment was prepared by using the physical quantity. The quota cost was compared with actual engineering cases. The results show that the quota cost and the actual project cost are basically at …

Go to article

First Prev Next Last