Materials Science and Engineering Commons^™

Experimental Study Of Drag Characteristics And Dust Removal Performance Of A Hybrid Wet-Filter Precipitator, Hang Yi, Zifeng Yang, Deqiang Chang, Xinjiao Tian, Jingxian Liu

Mechanical and Materials Engineering Faculty Publications

With their advantages of high dust removal efficiency and low drag characteristics, hybrid wet-filter precipitators have great potential for dust control in coal mines, but the underlying mechanisms are not well understood. In this study, to help fill this knowledge gap, a hybrid wet-filter precipitator consisting of a 40-layer metal filter and a defogger device is designed and a prototype is constructed. Experiments are conducted to investigate its drag characteristics under wind velocities from 0.85 to 5.68 m/s and its dust removal performance under wind velocities of 2 and 4 m/s. On the basis of results with the initial design, …

Investigation Of Temperature, Solution Strength, And Applied Stress Effects On Cation Exchange Processes In Different Geosynthetic Clay Liner Products, Kendra Fuller

Master's Theses

An extensive laboratory test program was conducted to analyze and compare the cation exchange processes in three different varieties of sodium bentonite (Na-B) geosynthetic clay liners (GCLs) over increased conditioning durations up to 32 days and investigate the effects of temperature, solution strength, and applied stress. The goal of this test program was to establish whether the variables of temperature, solution strength, and applied stress improved or degraded the engineering properties of GCLs in laboratory testing and municipal solid waste (MSW) landfill applications. The GCLs were conditioned in liquids of increasing ionic strength, using deionized water and 2, 50, and …

Response Of ¹¹B Enriched Zrb2 Ultra-High Temperature Ceramic To Neutron Irradiation At Elevated Temperatures, Yan Ru Lin, Takaaki Koyanagi, David J. Sprouster, Christian M. Petrie, William Fahrenholtz, Greg Hilmas, Yutai Katoh

Materials Science and Engineering Faculty Research & Creative Works

ZrB₂, an ultra-high temperature ceramic (UHTC) is being considered for use in fusion reactor first-wall structures, yet its response to irradiation remains poorly understood. This study employed scanning/transmission electron microscopy (S/TEM), synchrotron X-ray diffraction (XRD), finite element calculations, and thermal property measurements to thoroughly investigate the neutron-irradiation effects on ¹¹B-enriched ZrB₂. Neutron irradiations were conducted at 220 °C and 620 °C, with a neutron fluence of 2.2 x 1025 neutron/m2 (energy > 0.1 MeV), resulting in 3.9 dpa and 4200 appm He. The study revealed the unusual prevalence of prism loops and a > c anisotropic lattice …

Study Of The Structure Of Zn And Na Borophosphate Glasses Using X-Ray And Neutron Scattering Techniques, Uwe Hoppe, Parker T. Freudenberger, Richard K. Brow, Jozef Bednarčik, Alex C. Hannon

Materials Science and Engineering Faculty Research & Creative Works

The atomic structures of Zn and Na borophosphate glasses were studied using X-ray and neutron scattering techniques. Peaks assigned to the B−O, P−O, and O−O distances confirm that only BO₄ units co-exist with the PO₄ tetrahedra. The Zn−O and Na−O coordination numbers are found to be a little larger than four. The narrowest peaks of the Zn−O first-neighbor distances exist for the glasses along a line connecting the Zn (PO₃)₂ and BPO₄ compositions (50 mol% P₂O₅), which is explained by networks of ZnO₄, BO₄, and PO …

First-Principles Simulation Of The Interaction Between Dna Nucleotides And One-Dimensional Carbon Chain In Electrical Based Sequencing, Zeina Salman, Jin-Woo Kim, Steve Tung

Biological and Agricultural Engineering Faculty Publications and Presentations

Electrical DNA sequencing has attracted significant attention in recent years due to its simplified sequencing protocol, compact sequencing system, and relatively low sequencing cost. In the design and fabrication of the sequencing device, carbon-based nanomaterials such as graphene have been explored as a promising sensing material that provides an excellent combination of spatial resolution and base specificity. Using first-principles simulation, we determined the effect on the electrical conductivity of a one-dimensional carbon chain due to the presence of four DNA bases. The simulation results indicate that the interaction between the carbon chain and different DNA bases leads to different levels …

Analysis Of The Thermal Aging Kinetics Of Tallow, Chicken Oil, Lard, And Sheep Oil, Yun-Chuan Hsieh, Hao Ouyang, Yulin Zhang, Donyau Chiang, Fuqian Yang, Hsin-Lung Chen, Sanboh Lee

Chemical and Materials Engineering Faculty Publications

Understanding the thermal aging kinetics of animal oils is of vital importance in the storage and applications of animal oils. In this work, we use four different techniques, including UV-Vis spectrometry, viscometry, impedance spectroscopy, and acid–base titration, to study the thermal aging kinetics of tallow, chicken oil, lard, and sheep oil in the temperature range from 120 ◦C to 180 ◦C. The evolutions of the UV-Vis absorbance, dynamic viscosity, electric impedance, and acid titration are discussed with the defect kinetics. The evolutions of the color centers, defects for dynamic viscosity, and electric dipoles follow second-order, first-order, and zero-order kinetics, respectively. …

Development Of Tissue-Engineered Model Of Fibrotic Scarring After Spinal Cord Injury To Study Astrocyte Activation And Neurite Outgrowth In Vitro, Nikolas Ala-Kokko, Inha Baek, Younghye Song

Biomedical Engineering Faculty Publications and Presentations

Traumatic spinal cord injuries (SCI) are debilitating injuries affecting twenty-seven million people worldwide and cause functional impairments. Despite decades of research and medical advancements, current treatment options for SCI remain limited, in part due to the complex pathophysiology of spinal cord lesions including cellular transformation and extracellular matrix (ECM) remodeling. Recent studies have increased focus on fibrotic scarring after SCI, and yet much remains unclear about the impact of fibrotic scarring on SCI lesion progression. Here, using collagen and decellularized spinal cord-based composite hydrogels, a three-dimensional (3D) cell culture model mimicking the fibrous core of spinal cord lesions was implemented …

Growth And Faceting Of Tungsten And Oxides In Scandate Cathode Particles During In Situ Heating In The Scanning Electron Microscope, Huanhuan Bai, Thomas John Balk

Chemical and Materials Engineering Faculty Publications

Tungsten-based scandate dispenser cathodes are promising next-generation thermionic electron sources for vacuum electron devices, due to their excellent emission performance at tempera- tures lower than those required for conventional cathodes. There has been a significant recent effort to understand scandate cathode performance and to characterize the tungsten and other materials on the emitting surface, primarily via the study of cathodes before and after emission testing. Moreover, these scandate cathodes have typically been characterized at room temperature only. In situ obser- vations of scandate cathodes is challenging, as these devices are thermionic emitters that operate in a high-vacuum environment, and because …

Effects Of External Pressure On Cycling Performance Of Silicon-Based Lithium-Ion Battery: Modelling And Experimental Validation, Kai Zhang, Yinan He, Junwu Zhou, Xinyang Wang, Yong Li, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Controlling the stress state of electrodes during electrochemical cycling can have a positive effect on the cycling performance of lithium-ion battery. In this work, we study the cycling performance of silicon-based lithium-ion half cells under the action of pressure in a range of 0.1 to 0.4 MPa. The cycling performance of the silicon-based lithium-ion half cells increases first with increasing the pressure to 0.2 MPa and then decreases with further increasing the pressure. The analysis of the surface morphologies of cycled electrodes reveals that applying a pressure of 0.2 MPa leads to the formation of fine electrode surface with the …

Electrified Membrane For Water Treatment And Resource Recovery: Advancing Multiscale Strategies In Gas-Involving Reactions, Jianan Gao

Dissertations

Multifunctional, modular, and scalable water treatment technologies that operate without chemical additives are crucial for addressing global water pollution challenges. While traditional membrane-based separation processes are crucial for ensuring clean water supplies, they primarily focus on pollutant removal rather than on the upcycling of pollutants into valuable resources. Electrified membrane filtration presents a robust alternative, utilizing minimal or no chemical additives and harnessing electrical power to directly reduce contaminants or produce reactive oxidants or reductants on-site.

This dissertation is dedicated to the development of innovative electrochemically reactive membranes designed to address three major challenges: (1) the engineering of electrocatalysts with …

Experimental Investigation And Evaluation Of Mechanical Properties And Microstructural Characterization On Chromium Molybdenum Steel Processed Through Laser Based Welding, Rakesh S

Theses and Dissertations

Creep Strength Enhanced Ferritic (CSEF) martensitic modified 9Cr-1Mo (P91) steel is extensively employed in fast breeder nuclear reactors and thermal power plants owing to its superior resistance to thermal fatigue and oxidation corrosion compared with other low-alloy steels. Despite its excellent high-temperature performance, the weldability of this steel remains a critical concern.

Conventional arc welding processes generate excessive heat input and complex thermal cycles, resulting in heterogeneous microstructures, retention of δ-ferrite, and subsequent degradation in service life. In contrast, high energy density beam welding techniques such as laser and electron beam welding offer precise thermal control and minimal heat-affected zones …

Improving Fatigue Characteristics Of Cold Formed Low Carbon Steel, Venkatesan D

Theses and Dissertations

EN353 is a low carbon alloy steel, predominantly used in the manufacturing of heavy-duty gears, shafts, and pinions, especially crown wheel and pinions. It is usually carburized, hardened, and tempered to produce a hard, wear-resistant case. Heat- treated EN353 steel exhibits enhancement in ductility, toughness, strength, and hardness as the internal stresses get relieved in the material. Spheroidizing of medium and high carbon steel is a method of prolonged heating at a temperature below the eutectoid temperature, where pearlite, the lowest energy arrangement of steel, gets converted to ferrite and cementite.

The graphite content of steel assumes a spheroidal shape, …

Thermomechanical Analysis Of Biomass Plastic Composite (Bpc), Solomon Chijioke Madu, Victor Sunday Aigbodion, Ikechukwu Ike-Eze

Makara Journal of Technology

High-performance electrical insulation material can be manufactured using biomass plastic composite (BPC), which is a new type of composite material that is either made up of one or a combination of natural plant fibers/particulates, such as bamboo, cellulose fiber, rice husks, or hemp, and thermoplastic granules. In this study, the BPC composite material that was developed comprised polyethylene (PE), rice husk, and oyster shell. The results of the study showed a significant optimal improvement in the morphological, thermodynamic, and mechanical properties during the addition of 20% to 30% biomass particulates (i.e., rice husk and oyster shell). The thermogravimetric analysis, storage …

Rate Law For Photoelectrochemical Water Splitting Over Cuo, Bo-Yuan Gao, Wen-Hua Leng

Journal of Electrochemistry

Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen. However, the determination of rate law is rarely reported. To this purpose, copper oxide (CuO) is selected as a model photocathode in this study, and the photogenerated surface charge density, interfacial charge transfer rate constant and their relation to the water reduction rate (in terms of photocurrent) were investigated by a combination of (photo)electrochemical techniques. The results showed that the charge transfer rate constant is exponential-dependent on the surface charge density, and that the photocurrent equals to the product of the charge transfer rate constant …

Winning Works From Journal Of Electrochemistry: The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Recent Advances On Ruthenium-Based Electrocatalysts For Lithium-Oxygen Batteries, Yu-Zhe Wang, Zhuo-Liang Jiang, Bo Wen, Yao-Hui Huang, Fu-Jun Li

Journal of Electrochemistry

Rechargeable lithium-oxygen (Li-O₂) batteries have attracted wide attention due to their high energy density. However, the sluggish cathode kinetics results in high overvoltage and poor cycling performance. Ruthenium (Ru)-based electrocatalysts have been demonstrated to be promising cathode catalysts to promote oxygen evolution reaction (OER). It facilitates decomposition of lithium peroxide (Li₂O₂) by adjusting Li₂O₂ morphologies, which is due to the strong interaction between Ru-based catalyst and superoxide anion (O₂^–) intermediate. In this review, the design strategies of Ru-based electrocatalysts are introduced to enhance their OER catalytic kinetics in …

Numerical Analysis Of Explosion Characteristics Of Vent Gas From 18650 Lifepo4 Batteries With Different States Of Charge, Shi-Lin Wang, Xu Gong, Li-Na Liu, Yi-Tong Li, Chen-Yu Zhang, Le-Jun Xu, Xu-Ning Feng, Huai-Bin Wang

Journal of Electrochemistry

The combustion and explosion characteristics of lithium-ion battery vent gas is a key factor in determining the fire hazard of lithium-ion batteries. Investigating the combustion and explosion hazards of lithium-ion batteries vent gas can provide guidance for rescue and protection in explosion accidents in energy storage stations and new energy vehicles, thereby promoting the application and development of lithium-ion batteries. Based on this understanding and combined with previous research on gas production from lithium-ion batteries, this article conducted a study on the combustion and explosion risks of vent gas from thermal runaway of 18650 LFP batteries with different states of …

Winning Results Of The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 World Fuel Cell Conference Held In Ningbo, Zhejiang, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Investigation Of Distributed Additive Manufacturing For 3d Printed Headband Component During Global Supply Chain Disruptions, Elizabeth M. Mamros, Saketh Kantipudi, Matthew C. Eaton, Jinjin Ha, Brad L. Kinsey

Faculty Conference Papers and Presentations

During the COVID-19 global pandemic, a shortage of personal protective equipment (PPE) occurred. Manufacturers of these critical products were unable to keep up with the growing demands as the situation evolved. Most face shields, a common type of PPE, include a headband component to provide the appropriate fit for the user and curvature for the clear face shield attachment. To mitigate this shortage in the local region, the Portsmouth Naval Shipyard (PNSY) generated a computeraided design (CAD) file for the headband component and asked the University of New Hampshire (UNH) to manufacture it with all available 3D printers, including printers …

Metal Organic Frameworks Modified Textiles For The Detoxification Of Chemical Warfare Agent / Simulant, Selva Balasubramanian S

Theses and Dissertations

Chemical Warfare Agents (CWAs) have been listed as lethal weapons of mass destruction due to their extreme toxicity and devastating effects. Malfeasant usage of CWAs involved in the current world praxis poses threat to humankind. Owing to their acute lethal toxicity, the pursuit of favorable approaches for the detoxification/degradation are in continuous progress. In current trends, an imminent development of self-detoxification filters is highly desirable against the CWAs exposure. Exploiting protective materials that can be applicable in day – today life for an instantaneous detoxification will be of prodigious importance.

With this background, a series of Zirconium based UiO-66 and …

Utilization Of Sodium Flame Synthesis For The Formation And Deposition Of Pure Metal Materials For Applications In Additive Manufacturing, Zachariah Wargel

McKelvey School of Engineering Graduate Student Theses & Dissertations

Advanced material classes, such as high temperature alloys, ceramics, and refractory materials have become a key area of focus for expansion in the realm of additive manufacturing. Factors such as high melting points, material homogeneity, and physical properties such as ductility limit the application of popular additive manufacturing methods to these material classes. By utilizing sodium flame synthesis and deposition (SFD) technology, nanoparticle materials can be synthesized via combustion in a laminar co-flow diffusion burner and impacted such that the deposits can be used to manufacture designed components. By using the applicable precursor materials of metal chlorides and elemental sodium …

Zno Based Chemiresistive Sensor For Ammonia Detection, Anna Thomas

Theses and Dissertations

This work aims on the development of nanostructured sensing elements based on ZnO for detecting ammonia, specifically designed for applications in poultry and farm fields. To achieve this objective, we prepared sensing elements, including ZnO, CuO, WO3, NiO, ZnO/CuO, ZnO/WO3, ZnO/NiO, and rGO/ZnO, using the spray pyrolysis technique. Structural, morphological, and compositional analyses were studied using X-ray Diffraction (XRD), Field Emission Microscope (FESEM), and X-ray Photoelectron Spectroscopy (XPS), respectively. The vapour/gas detection studies of fabricated sensing elements were carried out in a home built sensing chamber.

The single oxides, ZnO, CuO, WO3, demonstrated ammonia detection in the range of 5-100 …

63rd Annual Rocky Mountain Conference On Magnetic Resonance

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 63rd annual meeting of the Rocky Mountain Conference on Magnetic Resonance, co-endorsed by the Colorado Section of the American Chemical Society and the Society for Applied Spectroscopy. Held in the Copper Conference Center, Copper Mountain, Colorado, August 4-8, 2024.

Implementation Of Machine Learning Using Deep Neural Networks To Estimate The Failure Risk Caused By Leakage In Pressure Relief Devices, Adi Yudho Wijayanto, Yossi Andreano, M. Ali Yafi Rizky, Dedi Priadi

Journal of Materials Exploration and Findings

The primary objective of deploying Pressure Relief Device (PRD) equipment is to ensure the safety of pressure vessels within a pressurized system. Over time, PRD equipment may degrade and fail to perform its intended function, which must be identified as a failure mode. To mitigate potential risks associated with this, it is recommended that an approach such as risk-based inspection (RBI) be implemented. Despite the widespread adoption of RBI, the method relies on qualitative techniques, leading to significant variations in equipment risk assessments. This study proposes a novel risk analysis method that uses deep learning-based machine learning to develop a …

Inspection Planning Of Subsea Pipeline Using Risk-Based Inspection, Ni Luh Triska Adelia, Badrul Munir, Johny Wahyuadi Soedarsono

Journal of Materials Exploration and Findings

Pipelines are an important tool in oil and gas exploration. Pipeline is a transmission and liquid collection lines, including their accessories, which transport fluids from one plant to another. In transmission and collection process, there is a possibility of failure which can have minor to major impact on personnel injury, the environment and interrupt the business process. To maintain safety and to prevent accidents, the source and cause of failure needs to be calculated. Risk-based inspection (RBI) is a method that can be used to calculate the risk and determine the inspection planning both schedule and method, by combining the …

Effect Of Impurities In Supercritical Co2 Environment On Steel Corrosion Behavior – An Overview, Shilla Rizqi Widianto, Johny Wahyuadi Soedarsono, Rini Riastuti, Badrul Munir

Journal of Materials Exploration and Findings

Carbon capture, utilization, and storage (CCUS) technology is one of the available technologies to reduce presence of greenhouse gasses. Implementation of CCUS technology strongly relates with the CO₂ transportation from the capturing facility to the storage in the geological reservoir. The most economical method for large-scale and long-distance CO₂ transportation is using pipeline in supercritical phase. Moreover, presence of impurities such as water, O₂, SO₂, H₂S, NO₂ may cause detrimental effect towards carbon steel pipeline. This paper intends to provide an initial information for supercritical CO₂ pipeline material selection, which …

Feasibility Study Of Using Energy Extracted From The Process Of Electrochemically Consumed Of Al 2024 For Powering Daily Used Electric Car, Yanuar Mohamad Marda, Rini Riastuti, Muhammad Hamka Ibrahim

Journal of Materials Exploration and Findings

Usage of green energy for transportation has become important due to the contribution of transportation activity to climate change. Electrochemical energy has been used as a source of green energy. The objective of this work is to evaluate sufficiency of energy provided by electrochemically consumed Al 2024 for supplying energy to daily used PHEV electric car. Study of previous articles, observation of typical amount of energy required, electrochemical galvanic cell experiments, and simple calculations have been conducted to determine produced energy feasibility. Electrical energy produced by consuming 340 gr of Al 2024 in galvanic cells has the total lifetime of …