Materials Science and Engineering Commons^™

The Structure, Properties And Dissolution Behaviors Of Phosphate Glasses, Han Zhang

Doctoral Dissertations

The poor chemical durability remains a critical challenge for the application of phosphate glasses. This study investigates the compositional influences on the structure, properties and chemical durability of Li2O-ZnO-P₂O₅ glasses. Their structural characteristics were analyzed utilizing high-performance liquid chromatography, Raman spectroscopy, and X-ray photoelectron spectroscopy. The incorporation of (Li2O+ZnO) in LZeq glasses depolymerizes the phosphate network. In LZ40P and LZ45P glasses, Li⁺ initially replaces Zn²⁺ associated with non-bridging oxygens (NBOs) in Q² tetrahedra. Once the substitution in Q² is complete, further Li⁺ incorporation leads to the replacement of Zn²⁺ in Q^{1 …}

Development, Characterization And Testing Of Traditonal And Advanced Nuclear Fuel Cladding Materials, Joshua Eddy Rittenhouse

Doctoral Dissertations

Kanthal D and FeCrAl alloys in general, are prospective candidates as accident tolerant nuclear fuel cladding materials. The work presented herein focuses on applying two techniques of severe plastic deformation, equal channel angular pressing (ECAP) and high-pressure torsion (HPT), as means of grain refinement to improve irradiation resistance. Samples of as-received, ECAP, and HPT processed Kanthal D were exposed to neutron irradiation to a dose of 2 DPA at two different temperatures, 300 °C and 500 °C. Detailed characterization was performed including mechanical and microstructural, and several positive improvements with regards to irradiation resistance were identified in the ECAP and …

Investigating The Effects Of Fly Ash On The Properties Of Silica-Deficient High Alumina Materials, Sai Akshay Ponduru

Doctoral Dissertations

This research is made up of five studies mainly focused on attaining sustainability in high alumina cements like calcium aluminate cement (CAC) and calcium sulfoaluminate belite cements (CSAB) by partially replacing them with additives and supplementary cementitious materials (SCMs) like fly ash (FA). The first study focused on understanding the reaction kinetics of CAC and FA binders at different replacement levels (i.e. between 10%-to-50% by mass) and their effect on mechanical properties. It was also shown that the reactive nature of FAs can be determined by calculating a single parameter called number of constraints (nc) derived from topological constraint theory. …

Characterization And Deportment Of Anode Impurities In Copper Electrorefining, Charles Michael Campbell

Doctoral Dissertations

The objective of this research was to study the deportment of the group 15 elements, arsenic, antimony and bismuth during copper electrorefining. Samples were collected from six industrial copper anodes with different compositions. Specimens were physically characterized and electro refined to understand the differences in the behavior of selected impurities. Inclusions in the cast metal structures were characterized using automated scanning electron microscopy and energy dispersive spectroscopy to measure and correlate their size, shape and composition. Arsenic and lead were found to have a positive correlation between concentration and size of inclusions. Using wavelength dispersive spectroscopy, multiphase inclusions were examined, …

Optical Sensor Instrumentation For Enhanced Continuous Caster Development, Hanok Wondimagegnehu Tekle

Doctoral Dissertations

Fiber-optic sensors are an emerging technology that can enhance process monitoring and control in steelmaking. They are especially valuable in the continuous caster’s harsh environment. This dissertation presents the industrial application and demonstration of three sensor types: single-mode silica fiber with Rayleigh-based Optical Frequency Domain Reflectometry (OFDR), sapphire fiber (single-crystal alumina) with Fiber Bragg Gratings (sFBG), and an in-line Raman spectroscopy probe. Each sensor served a distinct role in the continuous caster. Rayleigh OFDR sensors were embedded in tundishes for distributed thermal mapping at 7-mm spatial resolution across ≈4 m. Measurements were taken during preheating, casting, and ladle exchanges, and …

Investigation Of New Superconducting Materials For The Next Generation High-Performance Rf Superconducting Cavities For Particle Accelerators, Alex Gurevich, Jean Delayen, Chang-Beom Eom, Gianluigi Ciovati

Physics Faculty Publications

In this DOE-funded project DE-SC0010081-020 Old Dominion University (ODU) in collaboration with University of Wisconsin (UW) and Jefferson Laboratory have investigated both experimentally and theoretically electromagnetic response and losses in multilayered superconducting structures made of new SRF materials which can push the field and Q performance limits of accelerating cavities.

Preparation Of Mocvd-Grown Photocathodes Containing A Strained Gaas/Gaasp Superlattice, G. Blume, A. Masters, J. Grames, M. Stutzman, M. Grau, S. Marsillac

Physics Faculty Publications

In this work, we investigate heat cleaning options for high-polarization GaAs/GaAsP strained-superlattice (SSL) photocathodes with a distributed Bragg reflector (DBR) that were grown using metalorganic chemical vapor deposition (MOCVD). This was done using a microMott polarimeter at Jefferson Lab to optimize both quantum efficiency and polarization. The fabrication process for MOCVD-grown photocathodes does not allow for the inclusion of an arsenic cap, contrary to what is done when fabricating photocathodes using molecular-beam epitaxy (MBE). Without proper preparation, the performance of MOCVD-grown photocathodes can be limited due to surface contamination. Here, we varied both duration and temperature of the heat cleaning …

Effect Of Thermomechanical Processing And Heat Treatment On The Microstructure And Mechanical Properties Of Ultra-High Strength Steels, Rogerio Antao Cardoso

Doctoral Dissertations

"A martensite-based and an austenite-based Fe-Mn-Al steels were investigated aiming the pilot-scale production of steels that meet military specifications for Rolled Homogeneous Armor (RHA) and High-hardness Armor (HHA) plates. Each material underwent specific thermomechanical processes and the following hardness, Charpy V-notch (CVN) impact toughness at -40 °C and room-temperature tensile properties were correlated with the resulting microstructures.

Specimens of the martensitic steel were austenitized at 1010 °C, quenched and tempered at 150, 175, 200, 225 and 250 °C for times up to four hours. As for the Fe-Mn-Al steel, its hot rolling schedule was design to promote strain accumulation in …

Processing And Densification Of Multi-Phase High-Entropy Ceramics, Steven Smith

Doctoral Dissertations

"This work focuses on the processing and densification of multiphase, high-entropy ceramics to promote their use in friction stir welding technologies. Several high-entropy systems including high-entropy borides, carbides, and their composites were produced. Boro/carbothermal and carbothermal synthesis were used to produce high-entropy powders from oxide powder mixtures. Composites of high-entropy borides and high-entropy carbides were produced using a sequential approach to produce both phases. The carbide was first produced using carbothermal reduction, then ZrH2 and B4C were added to the carbide powder to produce the high-entropy boride phase. The resulting powder was densified by spark plasma sintering and pressureless sintering, …

Raft-Based Polymer And Nanoparticle Materials For Traumatic Brain Injury Treatment And Diagnostics, Aaron Priester

Doctoral Dissertations

"Traumatic brain injury (TBI) is a leading cause of death and disability worldwide. Neurodegenerative diseases that develop post-TBI can be, in part, attributed to DNA and cell-damaging reactive oxygen species (ROS) and lipid peroxidation products (LPOx). This thesis focused on overcoming the limits of current TBI material treatment approaches by employing a RAFT (reversible-addition fragmentation chain transfer) polymer approach that incorporated novel therapeutic, diagnostic and peptide-targeting monomers. An improved nanoparticle synthesis approach was also developed. Thiol and thioether-containing monomers neutralize both ROS and LPOx while Gd-containing monomers with enhanced magnetic resonance imaging (MRI) contrast provide diagnostics and material tracking in …

Oxidation Behavior Of Silicon Carbide, Matrix Graphite, And Refractory Multi-Principal Element Alloy, Visharad Jalan

Doctoral Dissertations

"The present study focuses on the investigation of the oxidation behavior of silicon carbide, matrix graphite in a water vapor environment. It also examines the oxidation behavior of refractory multi-principal element alloys when exposed to air. The oxidation behavior of silicon carbide and matrix graphite were investigated in conditions pertaining to off-normal incidents in high-temperature gas-cooled nuclear reactors. Understanding this is crucial for the prediction of their performance in such accidents and ensuring that the nuclear reactor is accident tolerant. Upon exposure to water vapor, the two A3-based matrix graphite exhibited different behaviors. The A3-27 type showed oxidation in all …

Development And Testing Of Irradiation-Tolerant High-Entropy Alloys, Matthew John Luebbe

Doctoral Dissertations

"High entropy alloys (HEAs) are a novel class of alloys made of multiple principal elements in near equal proportions. They have been observed to possess an array of useful engineering properties, such as good ductility and fracture toughness, high temperature strength, oxidation and corrosion resistance and irradiation resistance. This makes them promising candidates for harsh environments, especially nuclear reactors. These properties could potentially realize advanced Gen IV nuclear reactor designs. However, most HEA compositions contain Co, which activates under irradiation, generating safety and waste management concerns. This work studies three compositions of Co-free HEAs whose strength and microstructures are evaluated …

Ceramic Dielectrics For High Temperature Capacitor Applications, Alan Daniel Devoe

Doctoral Dissertations

Technical progress in microelectronics is allowing operation in environments that were previously considered impossible. Building complete electronic circuits for applications above 450 degrees C, such as the planned NASA missions to Venus, require a variety of active and passive components, including multilayer ceramic capacitors (MLCC).

This study explores calcium zirconate CaZrO3 and magnesium oxide MgO based dielectric compositions for MLCC applications that are capable of operating at extreme temperatures between 450 degrees C and 600 degrees C. Both materials were characterized with respect to impurities, dopants, crystal structure and microstructural development. Dielectric properties were measured to determine permittivity, dissipation factor, …

Characterization And Optimization Of Sand And Tung Oil-Based Resins For Binder-Jet 3d Printing, Daniel I. Ajiola

College of Graduate Studies: Theses & Dissertations

Binder-jet 3D printing as a transformative technology in additive manufacturing, offers the ability to fabricate complex structures with diverse materials. This thesis investigates the use of a sustainable tung oil-based resin to create composites, exploring the potential for an eco-friendly alternative to synthetic binders.

The aim of this research is to develop and characterize a bio-based resin formulation, using tung oil as the primary binder, for application in binder-jet 3D printing with sand as the reinforcement. The resin formulation was prepared by combining tung oil, n-butyl methacrylate, divinylbenzene, and di-tert-butyl peroxide in precise proportions, ensuring a balanced mixture that supports …

Effect Of Metal Ions On The Reactive Oxygen Species Scavenging Capabilities Of Cerium Oxide For Biological Applications, Agastya Mittal

Honors Undergraduate Theses

Ceria nanoparticles' capabilities to defend cells against oxidative stress through superoxide dismutase activity are well-documented. Ceria nanoparticles demonstrate a ratio between 3⁺/4⁺ oxidative states on the surface of the particles to exhibit oxygen vacancies, a feature that allows these particles to scavenge Reactive Oxygen Species (ROS) in times of Oxidative Stress. Oxidative stress arises from many wounds in the body, such as wounds in the skin, and can have significant impacts on the health of an individual. Even when receiving treatment for the skin wound, ROS can circulate from around the wound, be generated from an imbalance …

A Signal Processing And Mechanical Design Approach To Understanding Triboelectric And Piezoelectric Nanogenerators’ Output, Nicholas Rose

Honors Undergraduate Theses

Scalable energy harvesters—capable of converting motion into electrical output—provide promising solutions to increasing energy demands. This thesis was inspired by the potential biomedical applications of piezoelectric nanogenerators (PENG) and triboelectric nanogenerators (TENG). In theory, these devices could convert mechanical energy from the body into usable electricity for self-powered electronics such as pacemakers or cochlear implants. In line with this goal, this project worked to design a sustainable and biocompatible PENG; however, early devices produced inconsistent voltage. These output inconsistencies motivated an exploration of device reproducibility, but characterizing piezoelectric output signals is a particular challenge in the field. Subtle to significant …

Effect Of Aging Duration On The Microstructure And Corrosion Characteristics Of 17-4 Ph Stainless Steel, G. Narasinga Rao, Subrat Kumar Baral, Y. Madhavi, Sriram Vijayan, Ravikumar Dumpala

Michigan Tech Publications

Heat treatment plays a critical role in inducing key microstructural changes necessary to enhance corrosion resistance of 17-4 PH stainless steel (SS). During the process, precipitates form within the metal matrix, contributing to the strength of the martensitic steel. Inconsistencies in the literature concerning the response of 17-4PH SS to heat treatment have been noted. Therefore, this study examines the impact of aging duration on microstructural characteristics, microhardness, and corrosion resistance of material. The solution heat-treatment process consisted of heating the material to 1040 °C for one hour and rapid cooling in water. Subsequently, aging treatment was carried out at …

Multifunctional Nanoscale Pigments: Emerging Risks And Circular Strategies For A Sustainable Future, Ajay Vikram Singh, Preeti Bhardwaj, Vimal Kishore, Sunil Choudhary, Akihiko Hirose, Neha Gupta, Madleen Busse, Swarn Lata Singh, Christopher J. Osgood

Biological Sciences Faculty Publications

The substantial penetration of nanoscale pigments into a range of sectors has changed the dynamics of industries such as medical, material science, and many more. Nonetheless, their persistence in the environment and probable adverse impacts on health require that an assessment of such risks be formulated considering the One Health perspective. This viewpoint considers the crossing of boundaries of progress in the nanotechnology of nanoscale pigments with environmental, animal, and human health and emphasizes the significance of collaborative activity. Traditional perspectives explain the distribution of pigment history, while the nanotechnology of today's accessibility poses problems regarding utilization, toxicities, and interactions …

First-Principles Study Of Ferroelectric Properties And Co2 Reduction Reaction Capabilities In Two-Dimensional Monolayers And Heterostructures, Mo Li

Dissertations

Two-dimensional (2D) materials hold significant potential for CO₂ reduction reactions (CO₂RR) due to their high surface-to-volume ratio. However, achieving high selectivity for desired products and overcoming limitations posed by scaling relationships remain challenging. Recent studies suggest that ferroelectric (FE) materials with switchable out-of-plane polarization (OOP) can effectively tune the adsorption behavior, thermodynamics, and kinetics of CO₂RR, offering promising solutions to these challenges. Using density functional theory (DFT) and the Berry phase approach, this work expands the family of 2D ferroelectrics by theoretically identifying Y₂CO₂, Y₂CS₂, and Sc …

Determination Of Electrochemical Parameters For Predicting Reaction Mechanism And Algorithmic Approaches To Pain Assessment, Huize Xue

Dissertations

This dissertation introduces novel advancements in electrochemical kinetics and pain assessment, structured into two main parts. The first part focuses on the comprehensive analysis of the kinetic and mechanistic aspects of electrochemical reactions, utilizing a combination of experimental techniques and simulation methods. A new software tool, Envismetrics, was developed using Python to facilitate the analysis of complex electrochemical data, including cyclic voltammetry (CV), chronoamperometry (CA), and hydrodynamic voltammetry (HDV). The software was rigorously tested and validated with well-characterized redox systems such as the ferricyanide/ferrocyanide couple, dimethylamine borane (DMAB), and Per- and Polyfluoroalkyl Substances (PFAS). It was successfully used to determine …

Gas-Generating Reactive Materials: Design, Evaluation And Effect Of Morphology On Their Ignition And Combustion, Purvam Mehulkumar Gandhi

Dissertations

This work investigates optimizing gas-generating reactive materials, focusing on particle morphology's effect on ignition and combustion behavior. Metal-based gas-generating energetic materials (EMs) are promising alternatives to replace traditional CHNO compounds. Design of advanced metal-based EMs requires consistent ways of evaluating how their characteristics affect their ignition and combustion. Many relevant evaluation approaches exist; however, the results may be difficult to compare directly across different studies. Commonly, experimentalists ignite metal-based EMs in enclosed chambers and report pressures, P. However, direct comparison of these pressures is hindered by variations in the chamber volume, V, and the EM mass, m. To standardize the …

Decomposition Of Diisopropyl Methylphosphonate (Dimp) Exposed To Elevated Temperatures And Combustion Products Of Reactive Materials, Elif Irem Senyurt

Dissertations

The safe and efficient destruction of chemical weapon agents (CWAs) stockpiles remains a critical global challenge. Understanding the thermophysical properties, decomposition mechanisms, and interactions of CWAs with their environment is crucial for developing effective strategies to mitigate their threats. Diisopropyl methylphosphonate (DIMP) and Dimethyl methylphosphonate are commonly used nerve agent surrogates. This dissertation focuses on DIMP and DMMP, investigates their properties and behavior under conditions relevant to prompt defeat scenarios.

The thermophysical properties of DIMP and DMMP were experimentally characterized, including vapor-liquid surface tension (3-60 °C) and viscosities of neat and aqueous solutions. Results revealed significant non-ideal behavior in aqueous …

High-Frequency Gold Price Forecasting: Optimizing Multi-Layer Perceptron With Genetic Algorithm, Vrtagic Sabahudin, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Accurately forecasting gold price actions is critical in financial markets due to gold's role as a safe-haven asset. This paper addresses the challenge of forecasting gold prices by applying a Genetic Algorithm (GA) with a Multi-Layer Perceptron (MLP) model. The research exploits historical financial data from various instruments, including gold futures, Bitcoin, and key currency pairs, to improve prediction accuracy. By optimizing the MLP's hyper parameters through GA, the model efficiently captures complex relationships in high-frequency data, achieving a remarkable R² score of 0.9993. This level of precision demonstrates the model's potential for providing actionable insights for traders and investors. …

Single-Step Synthesis Of Activated Carbon From Arabica Spent Coffee Ground Using K2co3 As Activator Agent, Ghina Ivana Mieldan, Yuliusman Yuliusman

Journal of Materials Exploration and Findings

Activated carbon is a nanomaterial that is often used as an effective adsorbent. Activated carbon raw materials can use biomass, such as coffee grounds, which can be found along with the growth of public interest in coffee drinks. Chemical activators are used for activation to increase biomass carbon's adsorption capacity. Using K₂CO₃ activator to increase the specific surface area of activated carbon is more harmless than KOH. The use of spent coffee grounds as carbon source and food additive K₂CO₃ as an activator can make food-grade activated carbon that can be used for food. …

Effect Of Alkyd And Polyester Resin Compositions On Corrosion Resistance, Blistering, And Adhesion In Utilization Of Oily Sludge As Anti-Rust Coating Material, Gerets Land Kakalang, Yohanes David Kristianto, Johny Wahyuadi Mudaryoto

Journal of Materials Exploration and Findings

Oil sludge is a waste derived from upstream and downstream activities of the oil and gas industry which is estimated at 10,000 tonnes generated from all PERTAMINA downstream activities spread across various fields, processing units and depots throughout Indonesia. Oil sludge has the same characteristics as asphalt, where asphalt in previous studies can be used as an anti-rust coating, so that the handling of oily sludge can be topped up by reusing and having its own added value. The purpose of this research is to utilise waste oily sludge as an alternative anti-rust coating material and compare alkyd resin and …

A Comparative Study Of Conventional And Statistically Active Corrosion Methods For Corrosion Growth Assessment Of A 24-Inch Gas Pipeline, Rudi Rinaldi, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

Component failures in oil and gas pipelines can have fatal consequences, leading to operational downtimes and environmental damage. Knowledge of the corrosion growth rate is fundamental to pipeline integrity management, as it is essential for risk assessment and decisions related to asset management. This article aimed to compare two approaches for the corrosion growth estimation of the 24-inch offshore gas pipeline: the conventional method versus the Statistically Active Corrosion (SAC) method. This article is based on the in-line inspection (ILI) results of two consecutive assessments from 2020 to 2023 of the entire 73 km of the pipeline. The results show …

Comparative Analysis Of Risk-Based And Time-Based Inspection Application In Hydrocarbon And Chemical Industries: A Review, Azizar Azizar, Nofrijon Sofyan

Journal of Materials Exploration and Findings

RBI and TBI strategies are comparatively reviewed in terms of their contribution to maintaining asset integrity for asset owners in the hydrocarbon and chemical industries. The objective is to assess various methods on a cost-efficient and risk-managed operational safety basis. It utilizes common industry standards such as API 580 for RBI, and API 510, API 570, and API 653 for TBI, and also case studies and literature analysis. The analysis of data was conducted to examine how each approach deals with inspection planning and decision-making. They suggest that RBI's risk-based prioritization strategy leads to more effective management of high-risk assets, …

Cropsync: Ai-Powered Sustainable Crop Management, Ziad Doughan, Ibrahim Mneimneh, Zouheir Nakouzi, Noor Al Khaib, Samer Damaj, Jamal Chaaban, Hamza Mrad, Sari Itani

BAU Journal - Science and Technology

CropSync is a smart agriculture system that uses AI and IoT technologies to enable sustain- able crop management and precision farming. The system aims to address the challenges faced by the agriculture sector, such as increasing food production to meet global population demands while minimizing environmental impact. CropSync integrates sensors, cameras, and cloud-based analytics to provide farmers with real-time insights and recommendations for optimizing crop cul- tivation. The system upholds engineering professional and ethical standards, considering broader social, environmental, and economic implications. From a social perspective, CropSync improves food security and enhances farmers’ livelihoods through increased productivity and efficient re- …

Dendrite-Free Strategies For Aqueous Zinc-Ion Batteries: Structure, Electrolyte, And Separator, Gang Wu, Wu-Hai Yang, Yang Yang, Hui-Jun Yang

Journal of Electrochemistry

Continued growth in energy demand and increased environmental pollution constitute major challenges that need to be addressed urgently. The development and utilization of renewable, sustainable, and clean energy sources, such as wind and solar, are crucial. However, the instability of these intermittent energy sources makes the need for energy storage systems increasingly urgent. Aqueous zinc-ion batteries (AZIBs) have received widespread attention due to their unique advantages, such as high energy density, cost-effectiveness, environmental friendliness, and safety. However, AZIBs face significant challenges, mainly the formation of zinc dendrites that seriously affect the stability and lifetime of the batteries, leading to battery …

Electrochemical-Method-Induced Strong Metal-Support Interaction In Pt-Cnt@Sno2 For Co-Tolerant Hydrogen Oxidation Reaction, Shen-Zhou Li, Zi-Jie Lin, Qi-An Chen, Zhao Cai, Qing Li

Journal of Electrochemistry

Inducing the classic strong metal-support interaction (SMSI) is an effective approach to enhance the performance of supported metal catalysts by encapsulating the metal nanoparticles (NPs) with supports. Conventional thermal reduction method for inducing SMSI processes is often accompanied by undesirable structural evolution of metal NPs. In this study, a mild electrochemical method has been developed as a new approach to induce SMSI, using the cable structured core@shell CNT@SnO₂ loaded Pt NPs as a proof of concept. The induced SnO_x encapsulation layer on the surface of Pt NPs can protect Pt NPs from the poisoned of CO impurity in …