Computational Engineering Commons^™

Analysis Of Strength Of Glass Fibre Composite Leaf Spring Using Finite Element Method, Andoko Andoko, Poppy Puspitasari, Avita Ayu Permanasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Leaf spring, as one of the main components of the suspension system, serves the function of absorbing road shocks and any wheel vibrations, preventing them from being transmitted directly to the vehicle body. Moreover, it can increase the tire traction as well as support the weight of the vehicle and various kinds of external forces. Various studies on the use of composite materials for leaf springs have shown that the strength of composite leaf spring is similar to steel leaf spring with the same load carrying capacity. However, the composite leaf spring has the added advantage of being more lightweight. …

Factors Affecting The Surface Roughness In Sinking Edm Process, Ahmad Atif Fikri, Maftuchin Romlie, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

The purpose of this study is to gain insights into the surface quality (smoothness) of sinking EDM machining products. Among other non-conventional machining processes, Electrical Discharge Machining (EDM) is the most commonly used process. EDM is a machining process that uses electric sparks created between a workpiece and a tool (electrode). As a manufacturing process, EDM is used for workpieces which have intricate contours and precise dimensions, and works by using electric discharges (sparks) applied in a rapid series of repetitive electrical discharges between the two electrodes, separated by a dielectric fluid, and subject to an electric voltage. Since the …

Effect Of Magnetic Field On Diesel Engine Power Fuelled With Jatropha-Diesel Oil, Sukarni Sukarni, Partono Partono, Deni Krisdianto, Retno Wulandari

Journal of Mechanical Engineering Science and Technology (JMEST)

Jatropha oil has characteristics very close to the diesel fuel, so it has good prospects as a substitute or as a mixture of diesel fuel. Previous research showed that jatropha oil usage in diesel engines caused power to decrease. It was probably owing to the higher viscosity of the Jatropha oil compared to that of diesel oil. Installing the magnetic field in the fuel line of a diesel engine fueled with jatropha-diesel oil is expected to reduce the viscosity of jatropha-diesel oil mixture, hence improve the combustion reaction process. This research aims to know the influence of the magnetic field …

Optimum Conditions For Eor Using Nanofluids Subjected To Em Waves, Muhammad Kashif, Poppy Puspitasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Today’s major challenge for oil industry is to improve the oil recovery from the reservoir. Various enhanced oil recovery (EOR) methods have been applied in the field and the steam injection is one of the most favourable methods. The deep reservoir will result in failure of this method due to excessive heat dissipation. In this situation, generating and injecting steam may be uneconomical due to the tremendous reduction of the recovery. Some methods using nanotechnology have been introduced and elaborated. However, we propose the electromagnetic (EM) method as an alternative due to its long range transmission of the transverse waves. …

Analysis Of Biodegradation Of Bioplastics Made Of Cassava Starch, Nanang Eko Wahyuningtiyas, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Environmental pollution due to plastic waste taking too long to decompose has become a global problem. There have been numerous solutions proposed, one of which is the use of bioplastics. The use of cassava starch as the main ingredient in the manufacture of bioplastics shows great potential, since Indonesia has a diverse range of starch-producing plants. The aim of the present study is to analyse the effect of glycerol on microbial degradation. This experimental research investigated the use of cassava flour mixed with glycerol plasticizer at various concentrations (0, 2, 2.5, 3%) in the synthesis of bioplastics. The aspects studied …

Utilization Of Carbon Nanotubes In Electromagnetic Wave Detectors, Muhammad Hanis Zakariah, Poppy Puspitasari

Journal of Mechanical Engineering Science and Technology (JMEST)

Direct detection of hydrocarbon by an active source using electromagnetic (EM) energy termed seabed logging (SBL) has shown very promising results. However, currently available electromagnetic wave technology has a number of challenges include sensitivity and frequency matching. This paper presents development of the carbon nanotubes (CNTs) as electromagnetic wave detector due to outstanding properties of carbon nanotubes. They are currently one of the desired materials for advanced technologies. Two types of detectors were developed in this work, carbon nanotube-based (D1) and without nanotubebased (D2) detectors. Various configuration and arrangement for each type of detector were investigated to determine the one …

Evaluation And Enhancement Of Clean Energy Systems: Analytical, Computational And Experimental Study Of Solar And Nuclear Cycles, Nima Fathi

Mechanical Engineering ETDs

Clean (and specifically renewable) energy is steadily improving its global share. However, finite availability of fossil fuels and the growing effects of climate change make it an urgent priority to convince the industry and governments to incentivize investment in the renewable energy field and to make it more attractive by decreasing the capital cost. Until recently, uncertainties in funding limited renewable energy development, especially in the US. That limitation has been one of the barriers to progress. Another limitation of many renewable energy systems is the variability in their output, which makes them unsuitable for baseline power production. Therefore, fossil …

Ion Size Effects On The Properties Of Charge Regulating Electric Double Layers, Divya Jyoti Prakash

Nanoscience and Microsystems ETDs

The behavior of charged interfaces formed in various systems like colloidal solution, fuel cells, battery, electro-deposition, catalysis is governed by the properties of electrical double layer(EDL). Civilized model with charge regulation boundary condition determined by thermodynamic equilibrium at the interface has been used to model electrical double layer and shows that size of the solvent plays a critical role in characterizing the properties of EDL using classical density functional theory.This thesis investigates the impact of ion size in electrolyte solutions on the electrical double layer formed at the interface using a similar model. It is found that ion size greatly …

Iota: Internet Of Things Assistant, Brandon M. Okumura

Master's Theses

The Internet of Things is the networking of electronic devices, or “Things”, that enables them to collect and share data, as well as interact with their physical surround- ings. Analyzing this collected data allows us to make smarter economic decisions. These interconnected networks are usually driven by low-powered micro-controllers or cheap CPUs that are designed to function optimally with very little hardware. As scale and computational requirements increase, these micro-controllers are unable to grow without being physically replaced.

This thesis proposes a system, IoTA, that assists the Internet of Things by pro- viding a shared computational resource for endpoint devices. …

The Effect Of Bone And Ligament Morphology Of Ankle Joint Loading In The Neutral Position, Jinhyuk Kim

Mechanical & Aerospace Engineering Theses & Dissertations

Computational modeling of joints is used to investigate the effect of injuries, to plan surgeries, and to answer questions about joints that cannot be answered experimentally. Existing models of the ankle joint are moving toward being able to model specific patients, however, they do not include all of the anatomy (e.g., bones and/or ligaments) and have restrictive boundary conditions. These simplification in anatomy are made to minimize pre-processing and computation time. Because biomechanical modeling is increasingly focused on the implementation of patient specific cases, the effects of including more anatomical structures and determining how they affect the model results is …

A Hardware One-Time Pad Prototype Generator For Localising Cloud Security, Paul Tobin, Lee Tobin, Michael Mckeever, Jonathan Blackledge

Conference papers

In this paper, we examine a system for encrypting data before storing in the Cloud. Adopting this system gives excellent security to stored data and complete control for accessing data by the client at different locations. The motivation for developing this personal encryption came about because of poor Cloud security and doubts over the safety of public encryption algorithms which might contain backdoors. However, side-channel attacks and other unwanted third-party interventions in Cloud security, probably contribute more to the poor security record history. These factors led to the development of a prototype for personalising security locally which defeats cryptanalysis. The …

Poly Drop, Zachary T. Scott, Lilly J. Paul

Computer Engineering

Poly Drop is a software interface to control an Open Drop digital micro-fluidics system. We obtained a hardware system from Gaudi labs. Our task was to create a Graphical User Interface that made the control of the device easier and more automated for better testing. We created software that had 3 parts: a control GUI, arduino code to control the hardware, and Image Analysis that gives the user information such as location and color of liquid drops as they move across the electrode grid of the Open Drop system. The GUI was developed using Java Swing. The communication between the …

Djukebox: A Mobile Application Senior Project, Alexander M. Mitchell

Computer Science and Software Engineering

I’m going to discuss the process used to research, design, and develop a mobile application to handle song requests from patrons to disc jockeys. The research phase was completed in the first half of the project, during CSC-491, along with much of the design. The rest of the design and all of the development was completed during CSC-492. Once development began there were times when reverting back to the design phase was needed, which became apparent as more was learned about the mobile platform chosen for development, Android, and the backend server utilized, Google Firebase. Ultimately the project was purely …

Complementary Companion Behavior In Video Games, Gavin Scott

Master's Theses

Companion characters in are present in many video games across genres, serving the role of the player's partner. Their goal is to support the player's strategy and to immerse the player by providing a believable companion. These companions often only perform rigidly scripted actions and fail to adapt to an individual player's play-style, detracting from their usefulness. Behavior like this can also become frustrating to the player if the companions become more of a hindrance than they are a benefit. Other work, including this project's precursor, focused on building companions that mimic the player. These strategies customize the companion's actions …

On The Impact Of Android Api Evolution On Education Materials, Kennedy Owen

Master's Theses

The recent growing popularity of mobile devices has led to the establishment of several popular mobile platforms such as the Android operating system. To foster growth in this evolving market, Application Programming Interfaces (APIs) were created to enable developers to create mobile device applications that utilize mobile device features and functionality for personal or widespread commercial use. However, as a result of excessive device and API evolution, mobile development faces increasingly complex issues, including an alarmingly rapid decay of development resources.

This thesis conducts a case study around one such resource: a series of Android app development lab …

Advanced Text Analytics And Machine Learning Approach For Document Classification, Chaitanya Anne

LSU New Orleans Theses and Dissertations

Text classification is used in information extraction and retrieval from a given text, and text classification has been considered as an important step to manage a vast number of records given in digital form that is far-reaching and expanding. This thesis addresses patent document classification problem into fifteen different categories or classes, where some classes overlap with other classes for practical reasons. For the development of the classification model using machine learning techniques, useful features have been extracted from the given documents. The features are used to classify patent document as well as to generate useful tag-words. The overall objective …

Uncertainty Quantification Of Turbulence Model Closure Coefficients On Openfoam And Fluent For Mildly Separated Flows, Ike Witte

McKelvey School of Engineering Graduate Student Theses & Dissertations

In this thesis, detailed uncertainty quantification studies focusing on the closure coefficients of eddy-viscosity turbulence models for several flows using two CFD solvers have been performed. Three eddy viscosity turbulence models considered are: the one-equation Spalart-Allmaras (SA) model, the two-equation Shear Stress Transport (SST) k-ω model, and the one-equation Wray-Agarwal (WA) model. OpenFOAM and ANSYS Fluent are used as flow solvers. Uncertainty quantification analyses are performed for subsonic flow over a flat plate, subsonic flow over a backward-facing step, and transonic flow past an axisymmetric bump. In the case of flat plate, coefficients of pressure, lift, drag, and skin friction …

An Exact Analysis For Four-Order Acousto-Optic Bragg Diffraction Which Incorporates Both Incident Light Angle And Sound Frequency Dependencies, Adeyinka Sunday Ademola

Electrical Engineering Theses

This thesis extends the prior work which produced an exact solution to the four-order acousto-optic (AO) Bragg cell with assumed fixed center frequency and with exact Bragg angle incident light. The extension predicts the model that incorporates the dependencies of both the input angle of light and the sound frequency. Specifically, a generalized 4^th order linear differential equation (DE), is developed from a simultaneous analysis of four coupled AO system of DEs. Through standard methods, the characteristic roots, which requires solving a quartic equation, is produced. Subsequently, a derived system of homogeneous solutions, which absorbs the roots obtained using …

Generation And Analysis Of A Social Network: Hamlet, Preston Evans

Computer Science and Computer Engineering Undergraduate Honors Theses

This paper examines the generation and analysis of a social network produced from Shakespeare’s play Hamlet. An XML file of Hamlet was parsed to extract the characters within the play and also identify when the characters appeared within the same scene. After parsing the speakers and the connections between characters, a network graph was generated that displayed all the characters in Hamlet, represented by nodes, and edges that represented the connections between characters as measured by their scene co-appearance. The results of the network graph were then compared to a published social network for Hamlet created by hand. The two …

Simulating Foodborne Pathogens In Poultry Production And Processing To Defend Against Intentional Contamination, Silas B. Lankford

Computer Science and Computer Engineering Undergraduate Honors Theses

There is a lack of data in recent history of food terrorism attacks, and as such, it is difficult to predict its impact. The food supply industry is one of the most vulnerable industries for terrorist threats while the poultry industry is one of the largest food industries in the United States. A small food terrorism attack against just a single poultry processing center has the potential to affect a much larger population than its immediate consumers. In this work, the spread of foodborne pathogens is simulated in a poultry production and processing system to defend against intentional contamination. An …

Effects Of Computer Simulation And Animation (Csa) On Students’ Problem Solving In Engineering Dynamics: What And How, Seyed Mohammad Tajvidi

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Previous studies have shown that in many fields, computer simulation and animation (CSA) improve students’ learning and problem solving. However, despite the massive body of research on the role of computers in education, little research has been conducted to qualitatively examine how they affect the learning of engineering students. The purpose of this study was to explore how learning and problem solving were affected by computer modules and what similarities and differences existed between computer representations and paper-based examples.

An analysis of collected data, observations of participants’ problem-solving activities, and interviews revealed that computers can enhance students’ analytical thinking, organizing, …

Detection Of Leukocytes Stained With Acridine Orange Using Unique Spectral Features Acquired From An Image-Based Spectrometer, Courtney J. Hunter

Biomedical Engineering Undergraduate Honors Theses

A leukocyte differential count can be used to diagnosis a myriad blood disorders, such as infections, allergies, and efficacy of disease treatments. In recent years, attention has been focused on developing point-of-care (POC) systems to provide this test in global health settings. Acridine orange (AO) is an amphipathic, vital dye that intercalates leukocyte nucleic acids and acidic vesicles. It has been utilized by POC systems to identify the three main leukocyte subtypes: granulocytes, monocytes, and lymphocytes. Subtypes of leukocytes can be characterized using a fluorescence microscope, where the AO has a 450 nm excitation wavelength and has two peak emission …

A Framework For Post-Stroke Quality Of Life Prediction Using Structured Prediction, Andrew Hines, John D. Kelleher

Conference papers

This paper presents a conceptual model that relates Quality of Life to the established Quality of Experience formation process. It uses concepts developed by the Quality of Experience community to propose an adapted framework for developing predictive models for Quality of Life. A mapping of common factors that can be applied to health related quality of life is proposed and practical challenges for modelling and applications are presented and discussed. The process of identifying and categorising factors and features is illustrated using stroke patient treatment as an example use case.

Detection Of Pheromone Laying Event In Foraging Data Of Harvester Ants Using Change Point Analysis Method, Safeeul Bashir Safee

Computer Science ETDs

Communication is an important factor in the foraging performance of social insects, such as ants. During foraging, ants keep track of food sources by using memory (site fidelity) or by communicating through pheromones. Previous field experiments showed that the rate of seed collection depends on the distribution of food in the environment. If food is spatially clustered, then it is beneficial for ants recruit nest mates to collect seeds from large clusters. However, we do not know when the recruitment occurs in natural ant population. To explore this question, we used a power law distribution to arrange seeds in piles …

On Intelligent Mitigation Of Process Starvation In Multilevel Feedback Queue Scheduling, Joseph E. Brown

Master of Science in Computer Science Theses

CPU time-share process schedulers for computer operating systems have existed since Corbato published his paper on the Compatible Time Sharing System in 1962 [8]. With this new type of scheduler came the need to effectively divide CPU time between N processes, where N could be 2 or more processes. Modern time-sharing process schedulers which have been developed in the decades since have been designed to favor shorter, interactive processes over long-running processes, especially when incoming demand for CPU time exceeds supply and process starvation is inevitable. These schedulers, including Linux CFS, FreeBSD Ule, and the Solaris Fair Share Scheduler, are …

Aspect Extraction From Product Reviews Using Category Hierarchy Information, Yifeng Yang, Chen Cen, Minghui Qiu, Forrest Sheng Bao

Research Collection School Of Computing and Information Systems

Aspect extraction is a task to abstract the common properties of objects from corpora discussing them, such as reviews of products. Recent work on aspect extraction is leveraging the hierarchical relationship between products and their categories. However, such effort focuses on the aspects of child categories but ignores those from parent categories. Hence, we propose an LDA-based generative topic model inducing the two-layer categorical information (CAT-LDA), to balance the aspects of both a parent category and its child categories. Our hypothesis is that child categories inherit aspects from parent categories, controlled by the hierarchy between them. Experimental results on 5 …

Corgi: Compute Oriented Recumbent Generation Infrastructure, Christopher Allen Hunt

Master's Theses

Creating a bicycle with a rideable geometry is more complicated than it may appear, with today’s mainstay designs having evolved through years of iteration. This slow evolution coupled with the bicycle’s intricate mechanical system has lead most builders to base their new geometries off of previous work rather than expand into new design spaces. This crutch can lead to slow bicycle iteration rates, often causing bicycles to all look about the same. To combat this, several bicycle design models have been created over the years, with each attempting to define a bicycle’s handling characteristics given its physical geometry. However, these …

On The Development Of A One-Time Pad Generator For Personalising Cloud Security, Paul Tobin, Lee Tobin, Michael Mckeever, Jonathan Blackledge

Conference papers

Cloud computing security issues are being reported in newspapers, television, and on the Internet, on a daily basis. Furthermore, in 2013, Edward Snowden alleged backdoors were placed in a number of encryption systems by the National Security Agency causing confidence in public encryption to drop even further. Our solution allows the end-user to add a layer of unbreakable security by encrypting the data locally with a random number generator prior to uploading data to the Cloud. The prototype one-time pad generator is impervious to cryptanalysis because it generates unbreakable random binary sequences from chaos sources initiated from a natural noise. …

A Multiscale Model For Damage Progression And Detection In Piezo/Pyroelectric Composite Laminates, Yehia Bahei-El-Din, Amany Micheal

Centre for Advanced Materials

Assessment of damage initiation and progression in composite structures reinforced with electrically active filaments is modelled in a multiscale analysis. The analysis developed is a two-tier, interactive analysis, which involves two length scales; macroscopic, and microscopic. The proposed multiscale analysis provides seamless integration of the mechanics at the two length scales, including piezoelectric and pyroelectric coupling effects and damage under overall thermomechanical loads and an electric field applied to electroactive fibers. The macromechanical analysis is performed for multidirectional, fibrous laminates using the lamination theory, including bending, and the micromechanical analysis is performed using a two-phase model and a periodic array …

Detecting Laminate Damage Using Embedded Electrically Active Plies – An Analytical Approach, Amany Micheal, Yehia Bahei-El-Din

Centre for Advanced Materials

Assessment of damage initiation and progression in composite laminates with embedded electrically active plies is modeled. Utilizing electrically active layers embedded in composite laminates as damage sensors is proposed by several researchers and is mainly assessed experimentally. Sensing damage using embedded electrically active plies is generally preferred over the use of surface mounted PZT wafers since the range of the latter is limited to a very narrow area underneath the surface, while multiple damage mechanisms can generally be found in several plies of the laminate. The solution presented invokes two levels of analysis. Firstly, on the laminate level, applied membrane …