Computational Engineering Commons^™

Modeling Of Supersonic Wave And Shock Propagation Using The Lattice Boltzmann Method, Timothy P. Schroeder

Beyond: Undergraduate Research Journal

The lattice Boltzmann method (LBM) has emerged as a mesoscopic alternative to traditional Navier-Stokes solvers for modeling fluid dynamics offering advantages in computational efficiency, parallelization, and handling of complex boundaries. Despite these strengths, accurately reproducing compressible, shock-driven phenomena remains challenging. This study investigates the performance of LBM in simulating the Sod shock tube problem, a classical benchmark for compressible flow-using both single and double distribution function formulations across one- and two-dimensional lattice stencils. A MATLAB-based solver was developed to model the flow under isothermal conditions and compared to the analytical solution using the L2 norm error. The one-dimensional models achieved …

From Code To Cube: Interactive Fluid Simulation With Real Time Motion Control, Dominic Ziccardi, Carter Groezinger

Discovery Day - Daytona Beach

This research project explores the use of FluidX3D, an open-source lattice Boltzmann method (LBM) solver, to simulate fluid behavior within a three-dimensional cube container. The system supports both standard water models and rheoscopic fluid visualization, allowing detailed observation of complex flow dynamics in real time. The simulation accurately represents fluid motion, gravity-driven behavior, and rotational response within a bounded cubic domain. The longterm objective is to extend this digital simulation into a physical installation consisting of six synchronized square displays arranged to form a cube. This configuration will create a volumetric illusion of fluid occupying a tangible, handheld structure. An …

Extending The Essentially Entropic Lattice Boltzmann Method To Three-Dimensional Turbulent Flows, Michael Derderian

Discovery Day - Daytona Beach

The Entropic Lattice Boltzmann Method (EELBM) has demonstrated strong numerical stability and accuracy for two-dimensional simulations, particularly at higher resolutions where the entropic formulation introduces only minimal stabilizing turbulent viscosity and eventually converges to the Lattice Bhatnagar–Gross–Krook (LBGK) formulation. This built-in stabilization can be interpreted as an implicit large-eddy simulation (LES) model, allowing EELBM to capture complex turbulent behavior without requiring explicit subgrid-scale closures. While these advantages have been thoroughly validated in 2D, understanding how the entropic constraint regulates dissipation in three dimensions is essential for assessing EELBM’s suitability for practical, turbulence-dominated applications. This work focuses on the development and …

Multi-Dimensional Particle-In-Cell With Monte Carlo Collisions (Pic-Mcc) Simulation For Visualizing Plasma Flow And Secondary Ionization In Constricted-Anode Geometries, Parth Thakar

Discovery Day - Daytona Beach

Constricted-anode plasma sources generate locally intensified electric fields that enhance ionization near the anode, making them valuable in propulsion and laboratory plasma systems. However, the narrow geometry produces complex charge accumulation and secondary ionization effects that remain difficult to measure experimentally. To address this challenge, our research develops and applies a multi-dimensional Particle-in-Cell with Monte Carlo Collisions (PIC-MCC) simulation of a DC discharge in 1-D, 2-D, and 3-D configurations that model a constricted-anode device. PIC-MCC is a first-principles method that tracks electrons and ions individually while computing self-consistent electric fields and incorporating energy-dependent collision processes. This approach enables direct visualization …

Application Of Navier Stokes In Cfd, Hayden Kerkhoff, Gavin Palmer, Garret Seckinger

Discovery Day - Daytona Beach

This project investigates the use of 2-Dimensional Computational Fluid Dynamics (CFD) to analyze aerodynamic behavior, then compare data with the numerical solution of the Navier–Stokes equations run by MATLAB. By leveraging open‑source and possible industry CFD platforms—including OpenFOAM and commercial solvers such as ANSYS Fluent and Inventor Professional—the study evaluates how computational methods simulate, optimize, and predict key aerodynamic quantities such as lift, drag, stall angle, and Reynolds number.   The project focuses on modeling an airflow over specific parameters, such as different angles of attacks and ISA Atmospheric Conditions. Parametric variations in density, angle of attack, chord length, and temperature …

Experimental-Motion-Driven Cfd Investigation Of Slosh Dynamics In Propellant Tanks Of Spacecraft And Launch Vehicles, Priyanshu Savaliya

Doctoral Dissertations and Master's Theses

Liquid sloshing in partially filled propellant tanks can generate transient forces and moments that affect spacecraft and launch vehicle stability, guidance, and control. This research develops a one-way experimental-to-Computational Fluid Dynamics (CFD) integration framework to investigate free-surface slosh behavior under realistic excitation conditions.

The overarching goal of this thesis is to develop and evaluate a one-way experimental-motion-driven computational framework for predicting liquid slosh response in a partially filled cylindrical tank. Rather than relying on idealized sinusoidal inputs, this work uses experimentally measured actuator-feedback motion as the prescribed excitation for high-fidelity CFD. The central objective is to establish the experimental and …

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

Exploration Of Physics-Informed Grid Generation Technique For Wall-Modeled Les Using Eagle3d, Dominic Schneider

Doctoral Dissertations and Master's Theses

Wall-Modeled Large Eddy Simulation (WMLES) is an area of interest due to its ability to lower computational costs of LES. Even with the application of wall models, LES still proves to have practicality issues when it comes to use in industry, due to the expertise, time, and computational resources required. A novel technique for generating a lean, physics based WMLES grid is described.

The technique utilizes a RANS solution to extract turbulence information, user-specified values related to resolution of turbulent energy levels, acoustics waves, and shock waves, to generate a point cloud for producing a lean WMLES grid with in-house …

Mitigating Information Overload In Aviation Safety: Ai-Driven Hierarchical Tagging And Summarization Of Notam For Pre-Flight Information Bulletin, Rutong Gu, Yefeng Qu, Dongling Chen, Yu Tang, Ailin Zhou

International Journal of Aviation, Aeronautics, and Aerospace

To address the challenges of aviation safety information overload in Pre-flight Information Bulletin (PIB) systems, this study proposes an intelligent classification framework (ERNIE-DPCNN) that integrates knowledge-enhanced semantic representation with a Deep Pyramid Convolutional Network. Traditional systems relying on rule-based filtering mechanisms suffer from inefficiencies in critical information identification and high risks of human misjudgment. The proposed framework achieves breakthroughs through three technical innovations: (1) An aviation domain-adapted ERNIE model is constructed, leveraging phrase-level masking strategies to enhance semantic representation of compound identifiers; (2) A Deep Pyramid Convolutional Network (DPCNN) is designed to extract multi-granularity features via hierarchical convolution-pooling architecture, optimized …

Assessing The Impact Of Femur Morphological Variations On Pediatric Hip Joint Biomechanics Using Statistical Shape Modeling, Tamara Chambers

Doctoral Dissertations and Master's Theses

This dissertation aimed to (1) quantify morphological variations in the pediatric hip joint and (2) evaluate the sensitivity of an infant musculoskeletal model (MSM) to these variations, considering hip joint center estimation errors. A shape statistical model (SSM) of decedent infant femurs from the Ortolani collection was created using ShapeWorks, capturing key morphological features, such as variations in the femoral neck-shaft and anteversion angles. Seven synthetic femurs were generated from the SSM to create SSM-informed MSMs, which were systematically evaluated through kinematics and kinetics analyses in OpenSim. Incorporating the SSM led to slight changes in the pediatric MSMs’ kinematics but …

Development Of On-The-Fly Quasi-Steady State Approximation For Chemical Kinetics In Cfd, Abhinav Balamurugan

Doctoral Dissertations and Master's Theses

This study analyzes the feasibility of On-The-Fly Quasi-Steady-State Approximation (OTF-QSSA) application for solving chemical kinetics within Computational Fluid Dynamics (CFD) simulations, aiming to reduce the computational demand of detailed mechanisms. An algorithm that dynamically identifies and designates Quasi-Steady-State (QSS) species at specific grid locations and instances during the simulation was developed. With this information, our method pseudo-delays the advancement of concentrations for these QSS species—effectively setting their rate of concentration change to zero for a set number iteration before updating using the detailed mechanism and thereby omitting the computationally intensive processes typically required for their calculation during those skipped iteration. …

Immersive Framework For Designing Trajectories Using Augmented Reality, Joseph Anderson, Leo Materne, Karis Cooks, Michelle Aros, Jaia Huggins, Jesika Geliga-Torres, Kamden Kuykendall, David Canales, Barbara Chaparro

Publications

The intuitive interaction capabilities of augmented reality make it ideal for solving complex 3D problems that require complex spatial representations, which is key for astrodynamics and space mission planning. By implementing common and complex orbital mechanics algorithms in augmented reality, a hands-on method for designing orbit solutions and spacecraft missions is created. This effort explores the aforementioned implementation with the Microsoft Hololens 2 as well as its applications in industry and academia. Furthermore, a human-centered design process and study are utilized to ensure the tool is user-friendly while maintaining accuracy and applicability to higher-fidelity problems.

Deep Cnn-Based Automated Optical Inspection For Aerospace Components, Shashi Bhushan Jha

Doctoral Dissertations and Master's Theses

ABSTRACT

The defect detection problem is of outmost importance in high-tech industries such as aerospace manufacturing and is widely employed using automated industrial quality control systems. In the aerospace manufacturing industry, composite materials are extensively applied as structural components in civilian and military aircraft. To ensure the quality of the product and high reliability, manual inspection and traditional automatic optical inspection have been employed to identify the defects throughout production and maintenance. These inspection techniques have several limitations such as tedious, time- consuming, inconsistent, subjective, labor intensive, expensive, etc. To make the operation effective and efficient, modern automated optical inspection …

Resilience Model For Teams Of Autonomous Unmanned Aerial Vehicles (Uav) Executing Surveillance Missions, Robert Koeneke

Doctoral Dissertations and Master's Theses

Teams of low-cost Unmanned Aerial Vehicles (UAVs) have gained acceptance as an alternative for cooperatively searching and surveilling terrains. These UAVs are assembled with low-reliability components, so unit failures are possible. Losing UAVs to failures decreases the team's coverage efficiency and impacts communication, given that UAVs are also communication nodes. Such is the case of a Flying Ad Hoc Network (FANET), where the failure of a communication node may isolate segments of the network covering several nodes. The main goal of this study is to develop a resilience model that would allow us to analyze the effects of individual UAV …

Extracting A Body Of Knowledge As A First Step Towards Defining A United Software Engineering Curriculum Guideline, Anton Kiselev

Doctoral Dissertations and Master's Theses

In general, the computing field is a rapidly changing environment, and as such, software engineering education must be able to adjust quickly to new needs. Industry adapts to technologies as fast as it can, but the critical issue is a need for recent graduates with the necessary expertise and knowledge of new trends, technologies, and practical experience. The industries that employ graduates of computing degree programs aim to hire those who are familiar with the latest technical traits, tools, and methodologies to meet these needs, and the software engineering curriculum needs to respond quickly to these needs. Still, unfortunately, software …

Numerical Simulation Of A Cryogenic Spray, Neel Kishorkumar Shah

Doctoral Dissertations and Master's Theses

Cryogenic sprays have many applications in modern engineering. Cooling of electronic equipment subject to high heat flows, surgical ablation of gastrointestinal mucosae or orbital maneuvering are a few examples of their versatility. However, the atomization of a cryogenic liquid is a complex process. During such an event, aerodynamic effects associated with secondary atomization are further affected by thermodynamic flashing. A better understanding of the characteristics of cryogenic sprays is then necessary to allow for improved design and optimization in applications. The overarching objective of this study is to document such characteristics. The numerical simulation was performed over cryogenic nitrogen spray …

Support To Design For Air Traffic Management: An Approach With Agent-Based Modelling And Evolutionary Search, Gabriella Gigante, Roberto Palumbo, Domenico Pascarella, Alessandro Pellegrini, Gabriella Duca, Miquel Angel Piera, Juan José Ramos

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents a methodology to manage the support to design in ATM operations. We propose a workflow for the design of ATM solutions in a performance-based setting. The methodology includes the evaluation of the impact on human behaviour and exploits a combination of different paradigms, such as Agent-Based Modelling and Simulation, and Agent-Based Evolutionary Search. We prove the soundness of the methodology by carrying out a real case study, which is the transition from Direct Routing to Free Routing in the Italian airspace. The validation results exhibit limited errors for the assessment of the performance metrics under evaluation. Furthermore, …

Chip-Off Success Rate Analysis Comparing Temperature And Chip Type, Choli Ence, Joan Runs Through, Gary D. Cantrell

Journal of Digital Forensics, Security and Law

Throughout the digital forensic community, chip-off analysis provides examiners with a technique to obtain a physical acquisition from locked or damaged digital device. Thermal based chip-analysis relies upon the application of heat to remove the flash memory chip from the circuit board. Occasionally, a flash memory chip fails to successfully read despite following similar protocols as other flash memory chips. Previous research found the application of high temperatures increased the number of bit errors present in the flash memory chip. The purpose of this study is to analyze data collected from chip-off analyses to determine if a statistical difference exists …

Global Aviation System: Towards Sustainable Development, Marina P. Bonser Dr.

International Journal of Aviation, Aeronautics, and Aerospace

Aviation around the world has integrated into a global system. As the integration process continues, more aspects and levels of it need to be lead towards the sustainable development of the whole system via advancing strategic management, global communication proficiency, and technological expertise. It becomes essential to enrich global language (English) proficiency with cross-cultural communication competence not only for communication in the air but also for airport security, passenger and cargo services, aircraft and equipage engineering, building, and maintenance. Nowadays lower levels of management need more advanced strategic thinking and problem solving skills, and higher levels of management need global …

Coupled Fluid-Structure Interaction Modeling Of A Parafoil, Brandon Burnett

Doctoral Dissertations and Master's Theses

In the summer of 2014, Performance Designs, Inc. contacted Embry-Riddle Aeronautical University’s Eagle Flight Research Center to lead an investigation on square parachute design and optimization using modern computational methods to reduce costs in experimental testing. This thesis investigates the foundation for using an implicit fluid-structure interaction computational model to tackle the challenges of modeling a highly-flexible, porous fabric for design optimization of a parafoil parachute’s transient performance. Canopy deformations of a single-cell square parafoil using a fluid-structure interaction (FSI) model with nonlinear material modeling is compared to an experimental setup of matching geometry. The results of this thesis yielded …

Separation Bubbles And Vortex Formation In Cavity Flows, Kartheek Ravulapati

Doctoral Dissertations and Master's Theses

This research is a computational fluid dynamic study of the formation of vortices and separation bubbles in a square cavity as well as in a cylindrical cavity. Whereas there has been previous research work on the problem of a free stream over different types of cavities, like open and closed cavities or lid driven cavities, this research on an inlet induced flow inside a square cavity lead to unusual and interesting basic fluid dynamical phenomena. The flow in a square cavity and in a cylindrical cavity is simulated over a range of Reynolds numbers and the appearance of separation bubbles …

Computing Radiation Exchange, Jonathan L. Nutzati Fontaine

Doctoral Dissertations and Master's Theses

A computational tool to simulate thermal radiation between surfaces is developed. The output is verified against cases for which the analytical solutions are available. The tool can be used as a stand-alone program, or as an interactive module for CFD. In such an application the module would augment other heat transfer boundary conditions. The tool is demonstrated by post-processing surface temperature field data from a supersonic CFD calculation. The result is a net thermal radiation surface data field - the black body radiative effluxes as functions of temperature, less the integrated influxes multiplied by their geometric view factors from other …

Numerical Simulation Of Mode Transition In A Hydrogen-Fueled Scramjet, Manan Ajay Vyas

Master's Theses - Daytona Beach

The Wind-US computational fluid dynamics (CFD) flow solver was used to simulate dual-mode direct-connect ramjet/scramjet engine flowpath tests conducted in the University of Virginia (UVa) Supersonic Combustion Facility (SCF). The objective was to develop a computational capability within Wind-US to aid current hypersonic research and provide insight to flow as well as chemistry details that are not resolved by instruments available. Computational results are compared with experimental data to validate the accuracy of the numerical modeling. These results include two fuel-off non-reacting and eight fuel-on reacting cases with different equivalence ratios, split between one set with a clean (non-vitiated) air …

A Computational Method For Flow Separation Detection And Control For Axial Compressor Airfoils, Chang Jun Meang

Master's Theses - Daytona Beach

Conducting full annulus experiments on multistage compressors is costly and time consuming due to the complexity of the experimental processes. To reduce complexity, Computational Fluid Dynamics (CFD) methods are applied to turbomachinery and other applications in recent analysis of such cases. CFD methods are widely used within the aerospace industry and are increasingly demonstrating their reliability. For axial compressors, it is known that highly staggered compressor stators will increase the aerodynamic loading on the stator, which directly relates to the compressor stall and efficiency. In this work, compressor stators stagger angle is increased 4 ° to induce separation on the …