Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 11 of 11
Full-Text Articles in Computational Engineering
Impact Of Print Speed And Nozzle Temperature On Tensile Strength Of 3d Printed Abs For Permanent Magnet Turbine Systems, Wirawan Wirawan, Hilmi Iman Firmansyah, Satworo Adiwidodo, Mohammad Sukri Mustapa
Impact Of Print Speed And Nozzle Temperature On Tensile Strength Of 3d Printed Abs For Permanent Magnet Turbine Systems, Wirawan Wirawan, Hilmi Iman Firmansyah, Satworo Adiwidodo, Mohammad Sukri Mustapa
Journal of Mechanical Engineering Science and Technology (JMEST)
Operational parameters must be integrated into turbine systems' main components, which are determined by turbine systems' functional requirements. The need for producing component designs more effectively raises the possibility of using additive manufacturing. The study focuses on the optimization of the mechanical properties of the principal components of magnetic turbines manufactured with 3D printers using Acrylonitrile Butadiene Styrene (ABS), by changing the temperature and speed of the nozzle. The approach consisted of modeling a standard test piece in CAD software and producing ABS-based test pieces using a 3D printer with print speeds of 50, 70, 90, and 110 mm/s and …
Effect Of Addition Titanium Dioxide Nanoparticle On Properties Of Pineapple Leaf Fiber Mediated Tempo Oxidation, Rahmad Ikrom Ramadhan, Heru Suryanto, Ahmad Atif Fikri, Aminnudin Aminnudin, Jibril Maulana, Faqih Fadillah, Mohamed T. Mito, Kemal Masera
Effect Of Addition Titanium Dioxide Nanoparticle On Properties Of Pineapple Leaf Fiber Mediated Tempo Oxidation, Rahmad Ikrom Ramadhan, Heru Suryanto, Ahmad Atif Fikri, Aminnudin Aminnudin, Jibril Maulana, Faqih Fadillah, Mohamed T. Mito, Kemal Masera
Journal of Mechanical Engineering Science and Technology (JMEST)
Indonesia is an agricultural country with the potential to grow many plants as natural fiber sources. In order to improve its properties, natural fiber needs to be treated by applying nanomaterial so that it can compete with the characteristics of synthetic fibers. The study aims to determine the influence of adding titanium dioxide (TiO2) nanoparticles on pineapple leaf fiber (PALF) characteristics. The PALF was collected from the Subang plantation (Indonesia). The chemical treatment was carried out with pre-treatment using an alkalization process for 3 hours, and the oxidation process was carried out with TEMPO. TiO2 nanoparticle grafting was carried out …
Study On Effect Of 3d Printing Parameters On Surface Roughness And Tensile Strength Using Analysis Of Variance, Faqih Fadillah, Heru Suryanto, Suprayitno Suprayitno
Study On Effect Of 3d Printing Parameters On Surface Roughness And Tensile Strength Using Analysis Of Variance, Faqih Fadillah, Heru Suryanto, Suprayitno Suprayitno
Journal of Mechanical Engineering Science and Technology (JMEST)
Fused deposition modeling of 3D printing is the process of making workpieces or parts by adding filaments to each layer. Some indicators of a high-quality product of 3D printing are the precisions dimensions, the surface roughness, and tensile strength. This research aims to find the parameters most affecting surface roughness and tensile strength. The research design used an experimental method with input parameters: (1) print speed (15-35 mm/s), (2) print temperature (200-210C), (3) layer height (0.1 – 0.3 mm), (4) infill line directions (0-90), and dependent variables were surface roughness and tensile strength. The data distribution used the L9 orthogonal …
Effect Of The Homogenization Process On Titanium Oxide-Reinforced Nanocellulose Composite Membranes, Taufiq Mahsuli, Aisyah Larasati, Aminnudin Aminnudin, Jibril Maulana
Effect Of The Homogenization Process On Titanium Oxide-Reinforced Nanocellulose Composite Membranes, Taufiq Mahsuli, Aisyah Larasati, Aminnudin Aminnudin, Jibril Maulana
Journal of Mechanical Engineering Science and Technology (JMEST)
Indonesian pineapple production can reach 200 tons per day; however, pineapples generate a significant amount of waste. Pineapple peel waste can be used to make membranes. Composite membranes containing TiO2 have dense properties, low porosity, and increase the mechanical strength of the cellulose sheet. This research uses various ultrasonic homogenizers to homogenize the distribution of nanocellulose and TiO2 (50% and 100% power with 30, 60, and 90 minutes). The casting method is used to shape the membrane. The SEM test shows that the higher the power used and the longer the sonication time, the less agglomeration of about 1.63%/ cm2 …
Mechanical Properties Of Biocomposite With Various Composition Of Caco3 And Starch, Agris Setiawan, Fransisca Diana Wahyuningsih, Riria Zendy Mirahati
Mechanical Properties Of Biocomposite With Various Composition Of Caco3 And Starch, Agris Setiawan, Fransisca Diana Wahyuningsih, Riria Zendy Mirahati
Journal of Mechanical Engineering Science and Technology (JMEST)
Calcium carbonate has the potential to be used in the development of medical materials, including biomaterials. Biocomposite is composed of CaCO3 as matrix material and bioplastic from the combination of corn starch and cassava starch as reinforcement. This study aims to determine mechanical properties such as tensile strength and bending/flexural strength with varying compositions of CaCO3 and bioplastic. Characterization of the biocomposite uses Scanning Electron Microscope to observe the microstructure and composition elements of their structure. This study used 4 variations in the ratio of CaCO3 suspension: (Corn Starch + Cassava Starch). Each sample was characterized using specimen code A …
Effect Of Grafting Nano-Tio2 On Sansevieria Cylindrica Fiber Properties, Chrisrulita Sekaradi Wiguna, Heru Suryanto, Aminuddin Aminuddin, Jibril Maulana, Joseph Selvi Binoj, Alamry Ali
Effect Of Grafting Nano-Tio2 On Sansevieria Cylindrica Fiber Properties, Chrisrulita Sekaradi Wiguna, Heru Suryanto, Aminuddin Aminuddin, Jibril Maulana, Joseph Selvi Binoj, Alamry Ali
Journal of Mechanical Engineering Science and Technology (JMEST)
Natural fibers, which are abundant, environmentally friendly, and biodegradable, are used as a replacement for synthetic fibers. The composite strength can be increased by treating the surfaces of natural fibers with suitable chemicals, which can also improve the interface interaction between fiber and matrix. Application of a coupling agent in chemical treatment is utilized to reinforce the bonding between fiber and matrix. The objective of the study is to determine the influence of silane concentration on the Sansevieria cylindrica fiber properties. The methods included fibers treatment using ethanol and coupling agent as dissolving and TiO2 with concentrations of 0%, 0.25%, …
Effect Of Graphene Addition On Bacterial Cellulose-Based Nanocomposite, Jibril Maulana, Heru Suryanto, Aminnudin Aminnudin
Effect Of Graphene Addition On Bacterial Cellulose-Based Nanocomposite, Jibril Maulana, Heru Suryanto, Aminnudin Aminnudin
Journal of Mechanical Engineering Science and Technology (JMEST)
Bacterial cellulose (BC) is a widespread, low-cost biopolymer that has generally been produced from plants and biomass waste. A method for improving the range of applications for bacterial cellulose is adding graphene material. It has an outstanding feature that can increase the performance of nanocomposite materials. The research aims to observe the effect of graphene on the surface morphology, crystallinity, chemical bonding, and tensile strength of BC/CuO nanocomposite. For this study's synthesis, BC was synthesized by fermenting pineapple peel extract for 10 to 14 days. The produced BC was crushed, homogenized with a nano homogenizer machine, and filtered. Filtered BC, …
Design Of Shielded Metal Arc Welding Parameters For Optimum Tensile Strength Using Taguchi Method, Moh. Dedy Setiawan, Yanuar Rohmat A. P. Pradana, Suprayitno Suprayitno
Design Of Shielded Metal Arc Welding Parameters For Optimum Tensile Strength Using Taguchi Method, Moh. Dedy Setiawan, Yanuar Rohmat A. P. Pradana, Suprayitno Suprayitno
Journal of Mechanical Engineering Science and Technology (JMEST)
Shielded Metal Arc Welding (SMAW), an arc welding process, is widely used in applications. In practice, SMAW is widely applied to the welding process on hollow square pipe. Performance expected from this welding is the tensile strength of weld joint. The tensile strength is influenced by parameters process which have possibility for an optimization process to become ‘robust’. Robust is a design which less sensitive to the effect of uncertain quantities or noise factors. Taguchi method is the most efficient optimization method which accommodates the noise factors effect and requires less experiment. This study is focusing on optimizing the welding …
Analysis Of Casting Defect, Tensile Strength, And Hardness Of Al-Si Casting Alloy With Percentage Variation Of Clay Binder Bangkalan, Imam Muhtarom, Sunomo Sunomo
Analysis Of Casting Defect, Tensile Strength, And Hardness Of Al-Si Casting Alloy With Percentage Variation Of Clay Binder Bangkalan, Imam Muhtarom, Sunomo Sunomo
Journal of Mechanical Engineering Science and Technology (JMEST)
Casting is one of method that used in forming the work piece by melting specific metal and pouring into moulding that has been prepared. This study aimed to determine the effect of the use of Bangkalan clay as binder in sand moulding against tensile strength, hardness, and defects in Al-Si casting alloy by using gravity casting method. The method used in this study was experimental method then using descriptive analysis. Descriptive analysis included explanation of the test result of tensile strength, hardness, and the type of surface defect of Al-Si casting. Based on the research result obtained the highest shear …
Properties Of Cassava Starch Based Bioplastic Reinforced By Nanoclay, Nanang Eko Wahyuningtiyas, Heru Suryanto
Properties Of Cassava Starch Based Bioplastic Reinforced By Nanoclay, Nanang Eko Wahyuningtiyas, Heru Suryanto
Journal of Mechanical Engineering Science and Technology (JMEST)
Synthetic Synthetic plastic is chemical materials which cause severe environmental problems. Incinerating plastic waste leads to release of hazardous gases, which is not good for humans. Bioplastic can help reduce the dependence on fossil fuels and petroleum, that bioplastic can solve the problem of synthetic plastic use. This research aims to define the properties of the cassava starch-based bioplastic reinforced by nanoclay. Methods were experimental with bioplastic component of cassava starch, glycerol as plasticizer and nanoclay as reinforcement. The bioplastic was analyzed using XRD, tensile test, moisture absorption, biodegradability, and compared with another bioplastic. The results show that the addition …
The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin
The Effect Of Rotational Speed, Friction Duration, And Pressure On Tensile Strength Of Aisi 6061 Welding Joints, Dewi Puspitasari, Poppy Puspitasari, M. Rizka Gita Firmansyah, Solichin Solichin
Journal of Mechanical Engineering Science and Technology (JMEST)
Electric arc welding with covered electrodes is ideally suited for flat plates. If this technique is employed for welding rigid bodies, the results would be of poor quality. One viable solution to weld rigid bodies is through friction welding. The study aimed to investigate the tensile strength of specimens subjected to friction welding with variations in rotational speed, friction time, and pressure and to examine the microstructure of friction welding joints. This research used the one-shot case study design and involved descriptive analysis. The descriptive analysis described the results of tensile testing and microstructure of welding joints. Results showed that …