Computational Engineering Commons^™

Elevated Temperature Progressive Damage And Failure Of Duplex Stainless Steel, Darren P. Luke

Civil Engineering ETDs

Ductile failure of metals has been the focus of research efforts within academia and industry for many years since it is tremendously important for understanding the failure of structures under extreme loading conditions. However, limited research has been dedicated to elevated temperature ductile failure, which is critical for evaluating catastrophic events such as industrial, structural or shipping vessel fires. A detailed investigation was conducted on the structural response of Duplex Stainless Steel at elevated temperatures. The temperature dependence of elastic modulus, yield strength, ultimate strength, and ductility was measured up to 1000°C and a continuum damage plasticity model was developed. …

Blokus Game Solver, Chin Chao

Computer Engineering

Blokus (officially pronounced as “Block us”) is an abstract strategy board game with transparent Tetris-shaped, color pieces that players are trying to place onto the board. However, the players can only place a piece that touches at least one corner of their own pieces on the board. The ultimate goal of the game is to place as many pieces onto the board as a player can while blocking off the opponent’s ability to place more pieces onto the board. Each player has pieces with different shapes and sizes that can be placed onto the board, where each block within a …

Fingerprint Database Privacy Guard: An Open-Source System That Secures Fingerprints With Locality Sensitive Hashing Algorithms, Enrique Sanchez

Computer Science and Computer Engineering Undergraduate Honors Theses

Fingerprint identification is one of the most accurate sources of identification, yet it is not widely used in public facilities for security concerns. Moreover, the cost of fingerprint system is inaccessible for small-budget business because of their high cost. Therefore, this study created an open-source solution to secure fingerprint samples in the database while using low-cost hardware components. Locality Sensitive Hashing Algorithms such as ORB and Image hash were compared in this study as a potential alternative to SURF. To test the design, fifteen samples were collected and stored in a database without verifying the quality of the samples. Then, …

A Scalable, Chunk-Based Slicer For Cooperative 3d Printing, Jace J. Mcpherson

Computer Science and Computer Engineering Undergraduate Honors Theses

Cooperative 3D printing is an emerging technology that aims to increase the 3D printing speed and to overcome the size limit of the printable object by having multiple mobile 3D printers (printhead-carrying mobile robots) work together on a single print job on a factory floor. It differs from traditional layer-by-layer 3D printing due to requiring multiple mobile printers to work simultaneously without interfering with each other. Therefore, a new approach for slicing a digital model and generating commands for the mobile printers is needed, which has not been discussed in literature before. We propose a chunk-by-chunk based slicer that divides …

A Computational Analysis Of The Gradient Concentration Profile Of Deet And The Mosquito Behavioral Response, Brandon Carver

Master's Theses

DEET is a common active ingredient in most spatial repellents. DEET is also a volatile organic compound. DEET prevents mosquitoes from detecting and coming into contact with an human individual. Gas sensing technologies such as metal oxide semiconductor sensors can detect VOCs. The World Health Organization provides the majority of efficacy testing methods. This research adapts methods from the WHO and use of MOS sensors to further understand how and why DEET affects mosquitos. A custom developed system is used to measure DEET dissipation and observe mosquito behavioral response to the DEET. DEET dissipations and mosquito behavior is measured within …

Fluid Agitation Studies For Drug Product Containers Using Computational Fluid Dynamics, Matthew Hiroki Ichinose

Master's Theses

At Amgen, the Automated Vision Inspection (AVI) systems capture the movement of unwanted particles in Amgen's drug product containers. For quality inspection, the AVI system must detect these undesired particles using a high speed spin-stop agitation process. To better understand the fluid movements to swirl the particles away from the walls, Computational Fluid Dynamics (CFD) is used to analyze the nature of the two phase flow of air and a liquid solution.

Several 2-D and 3-D models were developed using Fluent to create simulations of Amgen's drug product containers for a 1 mL syringe, 2.25 mL syringe, and a 5 …

Population Curation In Swarms: Predicting Top Performers, Ryan W. Heller

Master's Theses

In recent years, new Artificial Intelligence technologies have mimicked examples of collective intelligence occurring in the natural world including flocks of birds, schools of fish, and swarms of bees. One company in particular, Unanimous AI, built a platform (UNU Swarm) that enables a group of humans to make decisions as a single mind by forming a real-time closed-loop feedback system for individuals. This platform has proven the ability to amplify the predictive ability of groups of humans in realms including sports, medicine, politics, finance, and entertainment. Previous research has demonstrated it is possible to further enhance knowledge accumulation within a …

Fogfly: A Traffic Light Optimization Solution Based On Fog Computing, Quang Tran Minh, Chanh Minh Tran, Tuan An Le, Binh Thai Nguyen, Triet Minh Tran, Rajesh Krishna Balan

Research Collection School Of Computing and Information Systems

This paper provides a fog-based approach to solving the traffic light optimization problem which utilizes the Adaptive Traffic Signal Control (ATSC) model. ATSC systems demand the ability to strictly reflect real-time traffic state. The proposed fog computing framework, namely FogFly, aligns with this requirement by its natures in location-awareness, low latency and affordability to the changes in traffic conditions. As traffic data is updated timely and processed at fog nodes deployed close to data sources (i.e., vehicles at intersections) traffic light cycles can be optimized efficiently while virtualized resources available at network edges are efficiently utilized. Evaluation results show that …

Landmine Detection Using Semi-Supervised Learning., Graham Reid

Electronic Theses and Dissertations

Landmine detection is imperative for the preservation of both military and civilian lives. While landmines are easy to place, they are relatively difficult to remove. The classic method of detecting landmines was by using metal-detectors. However, many present-day landmines are composed of little to no metal, necessitating the use of additional technologies. One of the most successful and widely employed technologies is Ground Penetrating Radar (GPR). In order to maximize efficiency of GPR-based landmine detection and minimize wasted effort caused by false alarms, intelligent detection methods such as machine learning are used. Many sophisticated algorithms are developed and employed to …

Analysis Of Mechanical Properties And Permeability Of Sand Moulding By Using Eggshell In Sand Casting, Wahyu Kurnianto, Poppy Puspitasari, Wahono Wahono

Journal of Mechanical Engineering Science and Technology (JMEST)

This study aimed to analyse the usage of Eggshell as mixture material of bentonite in metal casting process which used dried sand moulding. Eggshell variations in this study were 4%, 7%, 10% eggshell, and additional 3% of bentonite on each sample. This study used pre-experimental method and included to OneShot Case Study model. The highest strength was found on the sample 3 ES 10%. Tensile strength of dried sand moulding reach up to 0.09 kg/cm2, the compressive strength of dried sand moulding reached up to 3.11 kg/cm2, and the shear strength of dried sand moulding reached up to 1.13 kg/cm2. …

Analysis Of Casting Defect, Tensile Strength, And Hardness Of Al-Si Casting Alloy With Percentage Variation Of Clay Binder Bangkalan, Imam Muhtarom, Sunomo Sunomo

Journal of Mechanical Engineering Science and Technology (JMEST)

Casting is one of method that used in forming the work piece by melting specific metal and pouring into moulding that has been prepared. This study aimed to determine the effect of the use of Bangkalan clay as binder in sand moulding against tensile strength, hardness, and defects in Al-Si casting alloy by using gravity casting method. The method used in this study was experimental method then using descriptive analysis. Descriptive analysis included explanation of the test result of tensile strength, hardness, and the type of surface defect of Al-Si casting. Based on the research result obtained the highest shear …

Analysis Of Hardness, Quality And Fluidity Al-Si Casting Result By Using Clamshell (Placuna Placenta) As The Mixture Of Sand Moulding, Shikh Mohd Shahrul Nizan Shikh Zahari, Saif Aziz Saputra, Putut Murdanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Metal is an element that cannot be separated from human life. Almost all of human activities includes metal element in it. Metals can be formed through several ways, one of which is metal casting. Metal casting is one of technique in producing products where the metal was melted in crucible and then poured in a moulding which is similar to the original shape of the product. Moulding that are commonly used are sand moulding. Commonly, binder which used in sand casting process is bentonite. Bentonite, was kind of mineral which can be run out during its usage. This study aimed …

The Analysis Of Permeability And Mechanical Properties Of Sand Moulding Using Mixed Material Clamshell (Placuna Placenta) On Sand Casting, Kritchakhris Nawettanaprasert, Zakaria Bagus Aminanta, Putut Murdanto

Journal of Mechanical Engineering Science and Technology (JMEST)

This study objected to determine mechanical properties of sand moulding by conducting tensile test, compressive and shear test, and also permeability test. This study also had the other objective that was analyse clamshell (Placuna placenta) as mixture material for bentonite as binder in manufacturing sand moulding in order to reduce the usage of bentonite. The method that used in this study was pre-experimental method with One-Shot Case Study model. The best mechanical properties obtained on sample 3 clamshell 11%, permeability results obtained was 190 ml/min, tensile strength results obtained for the dry sand was 0.015 kg/cm2, compressive strength obtained for …

A Validation Study Of Time Series Data Forecasting Using Neural Networks, Marco Martinez, Jeremy Evert

Student Research

Artificial Intelligence(AI) is a growing topic in Computer Science and has many uses in real world applications. One application is using Al, or more specifically Neural Networks to model data and predict outcomes. Neural Networks have been used in the past to predict weather changes, create facial recognition software , and to create self-driving cars. Our project is a validation study of, “Modeling Time Series Data With Deep Fourier Neural Networks” by Gashler and Ashmore, 2016. Here we show that a neural network can be trained to be an effective predictor of weather patterns in Alaska over several years. Our …

Toward Building Resilient, Sustainable, And Smart Infrastructure In The 21st Century, Aly Mousaad Aly

Faculty Publications

In recent years, as a result of significant climate change, stringent windstorms are becoming more frequent than before. Given the threat that windstorms bring to people and property, wind/structural engineering research is imperative to improve the resilience of existing and new infrastructure, for community safety and assets protection. The Windstorm Impact, Science and Engineering (WISE) research program at Louisiana State University (LSU) focuses on creating new knowledge applicable to the mitigation of existing and new infrastructure, to survive and perform optimally under natural hazards. To achieve our research goals, we address two imperious challenges: (i) characterization of realistic wind forces …

Web-Based Archaeology And Collaborative Research, Fabrizio Galeazzi, Heather Richards-Rissetto

Department of Anthropology: Faculty Publications

While digital technologies have been part of archaeology for more than fifty years, archaeologists still look for more efficient methodologies to integrate digital practices of fieldwork recording with data management, analysis, and ultimately interpretation.This Special Issue of the Journal of Field Archaeology gathers international scholars affiliated with universities, organizations, and commercial enterprises working in the field of Digital Archaeology. Our goal is to offer a discussion to the international academic community and practitioners. While the approach is interdisciplinary, our primary audience remains readers interested in web technology and collaborative platforms in archaeology

A Multi-Task Approach To Incremental Dialogue State Tracking, Anh Duong Trinh, Robert J. Ross, John D. Kelleher

Conference papers

Incrementality is a fundamental feature of language in real world use. To this point, however, the vast majority of work in automated dialogue processing has focused on language as turn based. In this paper we explore the challenge of incremental dialogue state tracking through the development and analysis of a multi-task approach to incremental dialogue state tracking. We present the design of our incremental dialogue state tracker in detail and provide evaluation against the well known Dialogue State Tracking Challenge 2 (DSTC2) dataset. In addition to a standard evaluation of the tracker, we also provide an analysis of the Incrementality …

Resource Allocation In The Cognitive Radio Network-Aided Internet Of Things For The Cyber-Physical-Social System: An Efficient Jaya Algorithm, Xiong Luo, Zhijie He, Zhigang Zhao, Long Wang, Weiping Wang, Huansheng Ning, Jenq-Haur Wang, Wenbing Zhao, Jun Zhang

Electrical and Computer Engineering Faculty Publications

Currently, there is a growing demand for the use of communication network bandwidth for the Internet of Things (IoT) within the cyber-physical-social system (CPSS), while needing progressively more powerful technologies for using scarce spectrum resources. Then, cognitive radio networks (CRNs) as one of those important solutions mentioned above, are used to achieve IoT effectively. Generally, dynamic resource allocation plays a crucial role in the design of CRN-aided IoT systems. Aiming at this issue, orthogonal frequency division multiplexing (OFDM) has been identified as one of the successful technologies, which works with a multi-carrier parallel radio transmission strategy. In this article, through …

Large Eddy Simulations Of Vertical Jets In Crossflow, Pranaya Pokharel

LSU Doctoral Dissertations

Jets in crossflow (JICF) have applications ranging from oil spill to film cooling of turbine blades. Hence, an understanding of the flow physics is important. The majority of the research has been conducted for low velocity ratios between jet and crossflow with round jets. JICF is demonstrated to behave differently for high velocity ratios and different jet shapes. Circular and rectangular jets are commonly used in aircraft applications. Current study focuses on high velocity ratio JICF issuing from both circular and rectangular exit.

For simulating JICF, an in house code “Chem3D” is used with Large Eddy Simulation (LES) to model …

Numerical Study Of Liquid Atomization And Breakup Using The Volume Of Fluid Method In Ansys Fluent, Sai Saran Kandati

LSU Master's Theses

The spherical metal particles produced from the centrifugal atomization process have been the topic of numerous theoretical, experimental and numerical studies from the past few years. This atomization process uses centrifugal force to break-up molten material into spherical droplets, which are quenched into solidified granules by the flow of cold air on the spherical droplets. In the present work, a transient three-dimensional multiphase CFD model is applied to three different materials: Molten slag, aqueous glycerol solution, and molten Ni-Nb to study the influence of the dimensionless parameters on the centrifugal atomization outcome.

Results from numerical experiments indicated that the droplet …

Experimental Tests And Numerical Simulations For Failure Investigation On Corrugated Boxes Used On Household Appliance Packaging, Diego Fernandes Rodrigues, José Carlos Pereira

Journal of Applied Packaging Research

Packages made of corrugated paper are fundamental to the protection, transportation and handling of the appliance product market. During the storage and sales stages of a product, the package must resist compressive loads in different directions beyond moderate impacts. In this context, the objective of this work is to develop and implement a post-processor that allows the simultaneous analysis of two of the most common failure modes of packages made of corrugated paper: failure due to tensile or compressive stress limit, and failure due to local buckling, when the buckling of the faces of the corrugated paper between two peaks …

Prediction Of Flood Hydrograph In Small River Catchments Using System Modelling Approach, Ahmed Nasr, Zeinab Bedri, Loreta Ramanauske

Conference papers

Floods remain to be one of the natural catastrophic disasters with serious adverse social and economic implications on individuals and communities all around the world. In Ireland, frequency of flood events have increased dramatically during the last forty years and is expected to continue to rise primarily due to changes in rainfall and temperature patterns as a result of the global climate change. Small river catchments are usually vulnerable to different types of flooding particularly those associated with “monster” rainfall events, which are characterised by short durations and high intensities. Therefore accurate prediction of flood hydrographs resulting from these rainfall …

Spatial And Temporal Storm Generation From A Stochastic View, Jiaxiang Ding, Josept D. Revuelta-Acosta, Engel Bernard

The Summer Undergraduate Research Fellowship (SURF) Symposium

Precipitation is one of the most important parameters in the study of hydrology and most of the research has been done on daily storm generation. Current weather generation models are used to replicate daily or monthly time resolution, which is not able to show the variability within one day or one month. This project deals with sub-daily storm generation with finer resolution and more accurate estimation, which also requires an independent storm separation method. And the Monte Carlo correlated multivariate simulation is applied to compute the variables. The description is essential for soil erosion and water quality research. Another reason …

Understanding Suspend/Resume Path Of Linux Device Drivers, Yi Qiao, Xiaozhu Felix Lin

The Summer Undergraduate Research Fellowship (SURF) Symposium

Suspend/Resume (S/R), stands for putting mobile devices into sleep mode and wakes them up. Such a S/R process is heavily used in mobile devices today. While controlling by the operating system (OS), S/R process consumes a dominating portion of energy. In order to minimize the power consumption, we have to understand what happens on the S/R Path of modern device drivers so that further solutions reducing the overhead in that process can be found. In a modern OS, device drivers can make up over 70% of the source code, while still heavily dependent on the rest of the OS. Such …

New Methods For Understanding And Controlling The Self-Assembly Of Reacting Systems Using Coarse-Grained Molecular Dynamics, Stephen Thomas

Boise State University Theses and Dissertations

This research aims at developing new computational methods to understand the molecular self-assembly of reacting systems whose complex structures depend on the thermodynamics of mixing, reaction kinetics, and diffusion kinetics. The specific reacting system examined in this study is epoxy, cured with linear chain thermoplastic tougheners whose complex microstructure is known from experiments to affect mechanical properties and to be sensitive to processing conditions. Mesoscale simulation techniques have helped to bridge the length and time scales needed to predict the microstructures of cured epoxies, but the prohibitive computational cost of simulating experimentally relevant system sizes has limited their impact. In …

The Development And Validation Of Sinatra: A Three-Dimensional Direct Simulation Monte Carlo (Dsmc) Code Written In Object-Oriented C++ And Performed On Cartesian Grids, David Matthew Galvez

Master's Theses

The field of Computational Fluid Dynamics (CFD) primarily involves the approximation of the Navier-Stokes equations. However, these equations are only valid when the flow is considered continuous such that molecular interactions are abundant and predictable. The Knudsen number, $Kn$, which is defined as the ratio of the flow's mean free path, $\lambda$, to some characteristic length, $L$, quantifies the continuity of any flow, and when this parameter is large enough, alternative methods must be employed to simulate gases. The Direct Simulation Monte Carlo (DSMC) method is one which simulates rarefied gas flows by directly simulating the particles that compose the …

Damage Simulation Of Pre-Forming V-Neck Plates With Variations In Material Type, Time And Temperature Using The Taguchi Method, Avita Ayu Permanasari, Rr. Poppy Puspitasari, Kevin Valiant Cahya, Mahfud Ihsan

Journal of Mechanical Engineering Science and Technology (JMEST)

In metal forming, damage can be caused by several factors: load on the workpiece, initial heating temperature, and temperature due to the friction between the die and the material for pre-forming. The metal forming process can be executed in 2 ways, namely by hot working and cold working. During these two types of mechanical working process, the metal undergoes plastic deformation. In hot working, the required deformation force is relatively low, and changes in mechanical properties are also insignificant. In cold working, a higher force is required, but the strength of the metal will increase significantly. The use of simulation …

Mechanical Properties And Permeability Of Sand Casting Moulds With Eggshells Binder, Maryam Sharifi Jebeli Sharifi Jebeli, Wahyu Kurnianto, Wahono Wahono

Journal of Mechanical Engineering Science and Technology (JMEST)

This research aimed to analyse whether or not eggshell could be a potential addition to sand mould composition as a binding material together with bentonite. Different amounts of eggshell material, i.e. 4%, 7%, 10% and 3%, were added to each sample. This study was a type of pre-experimental design called the one-shot case study. Among all sand moulds under study, sample 3 10% ES in dry conditions had the highest tensile, compressive and shear strengths of 0.09 Kg/cm2, 3.11 Kg/cm2 and 1.13 Kg/cm2, respectively. The results of the permeability test with heat treatment at 110˚C for 60 minutes showed that …

Pine Flower Waste Innovation As A Plant Based Program Augmented Reality, Ayik Bela Saputra, Imam Muhtarom, Ni’Matul Rochmaniyah, Ardhana Iswari Citra Padmi, Ika Rahmawati

Journal of Mechanical Engineering Science and Technology (JMEST)

Indonesia one of the tropical countries in the world can not be separated from environment problems like other developing countries. One of the causes of declining environment quality is the decline of forests in Indonesia. In 2009, Indonesia’s forest area was by more than half, to about 88 million hectares. By the year 2013 the number is about 82 million hectares. One of the efforts to promote environment education is to familiarize planting plants to children from an early age from the school environment to the family environment. Therefore it is necessary an alternative in the form of planting media …

Properties Of Cassava Starch Based Bioplastic Reinforced By Nanoclay, Nanang Eko Wahyuningtiyas, Heru Suryanto

Journal of Mechanical Engineering Science and Technology (JMEST)

Synthetic Synthetic plastic is chemical materials which cause severe environmental problems. Incinerating plastic waste leads to release of hazardous gases, which is not good for humans. Bioplastic can help reduce the dependence on fossil fuels and petroleum, that bioplastic can solve the problem of synthetic plastic use. This research aims to define the properties of the cassava starch-based bioplastic reinforced by nanoclay. Methods were experimental with bioplastic component of cassava starch, glycerol as plasticizer and nanoclay as reinforcement. The bioplastic was analyzed using XRD, tensile test, moisture absorption, biodegradability, and compared with another bioplastic. The results show that the addition …