Computational Engineering Commons^™

Mathematical Modelling Of Nitrification And Denitrification Processes Based On Neuro-Fuzzy Bioreactor Models, Mirkhalil Agzamovich Ismailov, Boburbek Zokirjon Ugli Mannobjonov

Technical science and innovation

This paper presents the development and investigation of hybrid neural network and fuzzy models for the mathematical modelling of nitrification and denitrification processes in a biological wastewater treatment bioreactor. A comprehensive approach is proposed, integrating a mechanistic model of the ASM1/ASM2d type with neural networks (LSTM and Gaussian Process Regression), as well as a fuzzy control system based on an extended set of expert rules. A digital twin of the bioreactor was developed to allow for the prediction of the dynamic behavior of key parameters such as NH₄⁺, NO₃⁻, dissolved oxygen, etc. within a prediction range of 1 to 12 …

Modeling Of Supersonic Wave And Shock Propagation Using The Lattice Boltzmann Method, Timothy P. Schroeder

Beyond: Undergraduate Research Journal

The lattice Boltzmann method (LBM) has emerged as a mesoscopic alternative to traditional Navier-Stokes solvers for modeling fluid dynamics offering advantages in computational efficiency, parallelization, and handling of complex boundaries. Despite these strengths, accurately reproducing compressible, shock-driven phenomena remains challenging. This study investigates the performance of LBM in simulating the Sod shock tube problem, a classical benchmark for compressible flow-using both single and double distribution function formulations across one- and two-dimensional lattice stencils. A MATLAB-based solver was developed to model the flow under isothermal conditions and compared to the analytical solution using the L2 norm error. The one-dimensional models achieved …

Extending The Essentially Entropic Lattice Boltzmann Method To Three-Dimensional Turbulent Flows, Michael Derderian

Discovery Day - Daytona Beach

The Entropic Lattice Boltzmann Method (EELBM) has demonstrated strong numerical stability and accuracy for two-dimensional simulations, particularly at higher resolutions where the entropic formulation introduces only minimal stabilizing turbulent viscosity and eventually converges to the Lattice Bhatnagar–Gross–Krook (LBGK) formulation. This built-in stabilization can be interpreted as an implicit large-eddy simulation (LES) model, allowing EELBM to capture complex turbulent behavior without requiring explicit subgrid-scale closures. While these advantages have been thoroughly validated in 2D, understanding how the entropic constraint regulates dissipation in three dimensions is essential for assessing EELBM’s suitability for practical, turbulence-dominated applications. This work focuses on the development and …

Multi-Dimensional Particle-In-Cell With Monte Carlo Collisions (Pic-Mcc) Simulation For Visualizing Plasma Flow And Secondary Ionization In Constricted-Anode Geometries, Parth Thakar

Discovery Day - Daytona Beach

Constricted-anode plasma sources generate locally intensified electric fields that enhance ionization near the anode, making them valuable in propulsion and laboratory plasma systems. However, the narrow geometry produces complex charge accumulation and secondary ionization effects that remain difficult to measure experimentally. To address this challenge, our research develops and applies a multi-dimensional Particle-in-Cell with Monte Carlo Collisions (PIC-MCC) simulation of a DC discharge in 1-D, 2-D, and 3-D configurations that model a constricted-anode device. PIC-MCC is a first-principles method that tracks electrons and ions individually while computing self-consistent electric fields and incorporating energy-dependent collision processes. This approach enables direct visualization …

Application Of Navier Stokes In Cfd, Hayden Kerkhoff, Gavin Palmer, Garret Seckinger

Discovery Day - Daytona Beach

This project investigates the use of 2-Dimensional Computational Fluid Dynamics (CFD) to analyze aerodynamic behavior, then compare data with the numerical solution of the Navier–Stokes equations run by MATLAB. By leveraging open‑source and possible industry CFD platforms—including OpenFOAM and commercial solvers such as ANSYS Fluent and Inventor Professional—the study evaluates how computational methods simulate, optimize, and predict key aerodynamic quantities such as lift, drag, stall angle, and Reynolds number.   The project focuses on modeling an airflow over specific parameters, such as different angles of attacks and ISA Atmospheric Conditions. Parametric variations in density, angle of attack, chord length, and temperature …

Experimental-Motion-Driven Cfd Investigation Of Slosh Dynamics In Propellant Tanks Of Spacecraft And Launch Vehicles, Priyanshu Savaliya

Doctoral Dissertations and Master's Theses

Liquid sloshing in partially filled propellant tanks can generate transient forces and moments that affect spacecraft and launch vehicle stability, guidance, and control. This research develops a one-way experimental-to-Computational Fluid Dynamics (CFD) integration framework to investigate free-surface slosh behavior under realistic excitation conditions.

The overarching goal of this thesis is to develop and evaluate a one-way experimental-motion-driven computational framework for predicting liquid slosh response in a partially filled cylindrical tank. Rather than relying on idealized sinusoidal inputs, this work uses experimentally measured actuator-feedback motion as the prescribed excitation for high-fidelity CFD. The central objective is to establish the experimental and …

Sentience, Sheetal Agrawal

Masters Theses

The increasing urgency for sustainable and adaptive systems has driven research toward embedding intelligence directly into materials rather than relying solely on external sensing and control systems. This thesis explores how smart material1 embedded systems can be designed to recognize and respond to environmental signatures, defined as measurable patterns such as temperature fluctuations and mechanical forces. Central to this investigation is the integration of shape memory alloys, particularly Nitinol, with geometry-based actuation mechanisms that amplify material behavior into functional system responses.

The central argument is that designing with smart materials is a design problem, not primarily a materials science problem …

Turbulent Plenum Jet-Crossflow Validation Via Subgrid Scale Model Variation And Upstream Forcing Under Dynamic Hybrid Rans-Les, Cole W. Mccallum

Mechanical Engineering Undergraduate Honors Theses

In modern gas turbine design, film cooling has become ubiquitous as a method for limiting heat transfer between high temperature gases post-combustion and the surface of downstream blades. This paper validates the use of various computational fluid dynamics techniques in recreating an experiment measuring adiabatic effectiveness over a surface downstream of a compound-angle N2 plenum jet incident on a turbulent-air boundary layer [1]. To do this, both RANS and Dynamic Hybrid RANS-LES (DHRL) methods are implemented and compared to previous research [2]. The latter method is then modified through implementation of a different subgrid scale (SGS) model and through addition …

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

Mapping Leo Satellite Internet Performance Using Mobile Starlink Deployment, Annika Govil, Jacob Gray

UROP Posters

High-speed, low-latency internet connectivity on the move is a critical challenge for applications in connected vehicles, disaster response, and remote education. While terrestrial networks such as 4G or 5G are widespread, they lack coverage in remote or rural geographic areas.

Low Earth Orbit (LEO) satellite constellations, such as SpaceX's Starlink, promise global high-bandwidth, low-latency internet. However, their performance is well-documented in stationary scenarios, while data for *mobile* applications is scarce. This project explores the feasibility and real-world performance of LEO satellite internet while in motion.

Current research documents the performance of LEO satellite constellations in stationary settings. However, data concerning …

Influence Of The Sst K-Ω Stress-Limiter Coefficient On Transonic Shock Buffet Prediction For The Oat15a Supercritical Airfoil, Melinawo Vowotor

College of Graduate Studies: Theses & Dissertations

Transonic shock buffet predictions using the Shear Stress Transport (SST) k–ω turbulence model are known to be sensitive to the stress-limiter coefficient a₁, yet no systematic investigation of this sensitivity exists. This thesis presents a parametric study of a₁ for two-dimensional URANS simulation of shock buffet on the OAT15A supercritical airfoil at M = 0.73 and Re = 3 × 10⁶. Eleven a₁ values (0.25–0.37) are examined at α = 3.5°, and a matrix of five a₁ values across five angles of attack (3.0°–3.9°) maps the interaction with incidence. The results reveal that a₁ acts as a bifurcation parameter: a …

Exploration Of Physics-Informed Grid Generation Technique For Wall-Modeled Les Using Eagle3d, Dominic Schneider

Doctoral Dissertations and Master's Theses

Wall-Modeled Large Eddy Simulation (WMLES) is an area of interest due to its ability to lower computational costs of LES. Even with the application of wall models, LES still proves to have practicality issues when it comes to use in industry, due to the expertise, time, and computational resources required. A novel technique for generating a lean, physics based WMLES grid is described.

The technique utilizes a RANS solution to extract turbulence information, user-specified values related to resolution of turbulent energy levels, acoustics waves, and shock waves, to generate a point cloud for producing a lean WMLES grid with in-house …

Enhancing Gas Cyclone Performance With Exit Diffusers, Omar Mohamed Mourad Dwidar, Yasser El-Shaer, Khairy Elsayed, Seyyed Hossein Hosseini, Goodarz Ahmadi

Journal of Engineering Research

This study evaluates seven cyclone designs to enhance pressure drop and collection efficiency (CE), using the conventional cyclone as a baseline. While the conventional design is efficient in particle collection, it experiences significant energy losses due to high values of pressure drops. This study introduces exit diffusers with various configurations—A, B, C, D, E, and F—to improve cyclone performance. Computational Fluid Dynamics (CFD) simulations were used to analyse the pressure drop, tangential velocity, and static pressure at different levels of each cyclone. The findings reveal that cyclone D achieves a 41.1% reduction in pressure drop but at the cost …

Optimization Of The Cross-Section Of Generic Flexible Bridges, Manal Kamal Zaki, Mina M. Helmy, Mark M. Tawadros

Journal of Engineering Research

This paper investigates the behavior of flexible bridges prone to aerodynamic instabilities due to wind. Optimal cross-sections that reduce aerodynamic forces are recommended. This is achieved by studying a variety of bridge sections with different widths of upper and lower sloping edges in addition to studying the upper and lower cramps of the deck. The wind velocities are also parameterized. Computations are developed based on the powerful computational fluid dynamics (CFD) method known as FLUENT and embedded in ANSYS software. For parametric study, a design of experiments (DOE) is performed based on the response surface methodology (RSM) combined with the …

Direct Numerical Simulation Of Pulsating Flow In Curved Pipes: Insights Into Aortic Dissection In Humans, Gokul Anugrah Gopakumar

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation investigates the hemodynamics of pulsating blood flow in curved vessels through direct numerical simulations (DNS), with the overarching aim of uncovering fluid dynamic mechanisms linked to the onset and progression of aortic dissection in humans. The work is structured in two parts: (i) fundamental studies in idealized geometries and (ii) preliminary investigations in patient-specific anatomies. In the first part, curved pipe models representing the aortic arch are used to isolate the effects of pulsation frequency, amplitude ratio, and curvature ratio on transitional and turbulent flow dynamics. The simulations reveal that curvature-driven centrifugal forces shift the peak velocity toward …

Hybrid Rans-Les Analysis Of Turbulent Flame Under Near Blow-Off Condition In A Multi-Stage Swirl Combustor, Brandon O'Brien

College of Graduate Studies: Theses & Dissertations

Advances in computational resources are making computational fluid dynamics (CFD) increasingly accessible for a variety of engineering applications. However, certain complex problems, such as simulating detailed flame kinetics, remain computationally prohibitive for many users. Developing cost-effective methods to simulate these challenges would greatly benefit applications involving flame dynamics, such as turbine engines or industrial burners. This study investigates the effect of main stage swirler intensity on near lean blow-off characteristics in a multi-staged swirl combustor using Ansys Fluent. The hybrid RANS-LES turbulence model, Stress Blended Eddy Simulation (SBES) coupled with Flamelet Generated Manifold (FGM) combustion model was selected to model …

Mitigating Information Overload In Aviation Safety: Ai-Driven Hierarchical Tagging And Summarization Of Notam For Pre-Flight Information Bulletin, Rutong Gu, Yefeng Qu, Dongling Chen, Yu Tang, Ailin Zhou

International Journal of Aviation, Aeronautics, and Aerospace

To address the challenges of aviation safety information overload in Pre-flight Information Bulletin (PIB) systems, this study proposes an intelligent classification framework (ERNIE-DPCNN) that integrates knowledge-enhanced semantic representation with a Deep Pyramid Convolutional Network. Traditional systems relying on rule-based filtering mechanisms suffer from inefficiencies in critical information identification and high risks of human misjudgment. The proposed framework achieves breakthroughs through three technical innovations: (1) An aviation domain-adapted ERNIE model is constructed, leveraging phrase-level masking strategies to enhance semantic representation of compound identifiers; (2) A Deep Pyramid Convolutional Network (DPCNN) is designed to extract multi-granularity features via hierarchical convolution-pooling architecture, optimized …

Development Of A Model For Fire Spread In Low-Gravity Conditions, Kathleen Martinus

The Journal of Purdue Undergraduate Research

No abstract provided.

Enhancing Cybersecurity In Wireless Sensor Networks: Machine Learning, Blockchain And Future Perspectives, Ilemona Solomon Atawodi

Dissertations

Security in the Industrial Internet of Things encounters various security issues but the main issues can be broken down into three core issues: Availability, Integrity, and Confidentiality. Security challenges generally tend to be caused by a failure of the system in one of these areas or cause a failure in one of these areas. Therefore researching scalable solutions to these security issues is prudent to explore methods that could be applied to large-scale industrial IIoT with tens to hundreds of devices as well as small-scale systems on a tiny factory floor comprising of just a few devices. In our research, …

Development Of On-The-Fly Quasi-Steady State Approximation For Chemical Kinetics In Cfd, Abhinav Balamurugan

Doctoral Dissertations and Master's Theses

This study analyzes the feasibility of On-The-Fly Quasi-Steady-State Approximation (OTF-QSSA) application for solving chemical kinetics within Computational Fluid Dynamics (CFD) simulations, aiming to reduce the computational demand of detailed mechanisms. An algorithm that dynamically identifies and designates Quasi-Steady-State (QSS) species at specific grid locations and instances during the simulation was developed. With this information, our method pseudo-delays the advancement of concentrations for these QSS species—effectively setting their rate of concentration change to zero for a set number iteration before updating using the detailed mechanism and thereby omitting the computationally intensive processes typically required for their calculation during those skipped iteration. …

Immersive Framework For Designing Trajectories Using Augmented Reality, Joseph Anderson, Leo Materne, Karis Cooks, Michelle Aros, Jaia Huggins, Jesika Geliga-Torres, Kamden Kuykendall, David Canales, Barbara Chaparro

Publications

The intuitive interaction capabilities of augmented reality make it ideal for solving complex 3D problems that require complex spatial representations, which is key for astrodynamics and space mission planning. By implementing common and complex orbital mechanics algorithms in augmented reality, a hands-on method for designing orbit solutions and spacecraft missions is created. This effort explores the aforementioned implementation with the Microsoft Hololens 2 as well as its applications in industry and academia. Furthermore, a human-centered design process and study are utilized to ensure the tool is user-friendly while maintaining accuracy and applicability to higher-fidelity problems.

Two-Phase Flow Simulations With Plic-Vof Method And Dynamic Mesh Refinement, Vimalan Adaikalanathan

Mechanical and Aerospace Engineering Dissertations - Archive

Two-phase flows are critical in a variety of engineering applications that span multiple length scales. These applications encompass macroscopic phenomena, such as dam breakage and wave-structure interactions, as well as microscopic events, including droplet impacts and boiling, and mixed-scale issues like spray dynamics. Accurate representation of evolving interfaces is essential for numerical simulations of these problems, and the Volume of Fluid (VOF) method combined with the Piecewise Linear Interface Calculation (PLIC) approach is employed to fulfill this requirement. To tackle the computational challenges associated with high-resolution meshes in deforming two-phase flows, Adaptive Mesh Refinement (AMR) is utilized to enhance mesh …

Steady And Transient Study Of Conjugate Heat Transfer In Regenerative Cooled Nozzle, Khaled Bensayah, Khadidja Kamri

Emirates Journal for Engineering Research

The Heat transfer is one of the most serious challenges that exist in a supersonic nozzle flow. The combustion chamber wall and the nozzle are exposed to high-temperature gases during combustion and gas expansion, which can eventually lead to structural failure. This paper reports a computational study of steady and transient conjugate heat transfer in regenerative water cooled nozzle. Numerical computation solved Reynolds-averaged equations based on RSM-Omega turbulence model coupling with solid-phase heat conduction equation and with coolant-phase. The effect of four inlet cooled approach length 0 inch, 6 inch, 12 inch and 18 inch are studied and validated against …

Statistical Approach To Quantifying Interceptability Of Interaction Scenarios For Testing Autonomous Surface Vessels, Benjamin E. Hargis, Yiannis E. Papelis

Modeling, Simulation and Visualization Student Capstone Conference

This paper presents a probabilistic approach to quantifying interceptability of an interaction scenario designed to test collision avoidance of autonomous navigation algorithms. Interceptability is one of many measures to determine the complexity or difficulty of an interaction scenario. This approach uses a combined probability model of capability and intent to create a predicted position probability map for the system under test. Then, intercept-ability is quantified by determining the overlap between the system under test probability map and the intruder’s capability model. The approach is general; however, a demonstration is provided using kinematic capability models and an odometry-based intent model.

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles are equipped with Thermal Protection Systems (TPS) that encounter high heat rates and protect the payload while entering a planetary atmosphere. For most missions that interest NASA, ablative materials are used as TPS. These materials undergo several mass and energy transfer mechanisms to absorb intense heat. The size and construction of the TPS are based on the composition of the planetary atmosphere and the impact of various ablative mechanisms on the flow field and the material. Therefore, it is essential to quantify the rates of different ablative phenomena to model TPS accurately. In this work, the impact of …

Molecular Dynamics Modeling Of Polymers For Aerospace Composites, Swapnil Sambhaji Bamane

Dissertations, Master's Theses and Master's Reports

Polymer matrix composite materials are widely used as structural materials in aerospace and aeronautical vehicles. Resin/reinforcement wetting and the effect of polymerization on the thermo-mechanical properties of the resin are key parameters in the manufacturing of aerospace composite materials. Determining the contact angle between combinations of liquid resin and reinforcement surfaces is a common method for quantifying wettability. It is challenging to determine contact angle values experimentally of high-performance resins on CNT materials such as CNT, graphene, bundles or yarns, and BNNT surfaces. It is also experimentally difficult to determine the effect of polymerization reaction on material properties of a …

Energy Dissipation In A Sand Damper Under Cyclic Loading, Ehab Sabi

Civil and Environmental Engineering Theses and Dissertations

Various seismic and wind engineering designs and retrofit strategies have been in development to meet structures' proper and safe operation during earthquake and wind excitation. One such method is the addition of fluid and particle dampers, such as sand dampers, in an effort to reduce excessive and dangerous displacements of structures. The present study implements the discrete element method (DEM) to assess the performance of a pressurized sand damper (PSD) and characterize the dissipated energy under cyclic loading. The idea of a PSD is to exploit the increase in shearing resistance of sand under external pressure and the associated ability …

Design And Development Of Active Flow Effectors, Konstantinos Kanistras

Summer Community of Scholars (RCEU and HCR) Project Proposals

No abstract provided.

Design And Development Of An Online Wind Tunnel, Konstantinos Kanistras

Summer Community of Scholars (RCEU and HCR) Project Proposals

No abstract provided.

Numerical And Scaling Study On Application Of Inkjet Technology To Automotive Coating, Masoud Arabghahestani Dr.

Theses and Dissertations--Mechanical and Aerospace Engineering

A thorough literature review identified lack of precision control over quality of droplets generated by the currently available industrial sprayers and a growing need for higher quality droplets in the coating industry. Particularly, lack of knowledge and understanding in continuous inkjets (CIJ) and drop-on-demand (DOD) technologies is identified as significant. Motivated by these needs, this dissertation is dedicated to computational fluid dynamics (CFD) and scaling studies to improve existing inkjet technologies and develop new designs of efficient coating with single and/or multiple piezoelectric sensors to produce on-demand droplets. This dissertation study aims at developing a new DOD type coating technology, …