Computational Engineering Commons^™

Modeling Of Supersonic Wave And Shock Propagation Using The Lattice Boltzmann Method, Timothy P. Schroeder

Beyond: Undergraduate Research Journal

The lattice Boltzmann method (LBM) has emerged as a mesoscopic alternative to traditional Navier-Stokes solvers for modeling fluid dynamics offering advantages in computational efficiency, parallelization, and handling of complex boundaries. Despite these strengths, accurately reproducing compressible, shock-driven phenomena remains challenging. This study investigates the performance of LBM in simulating the Sod shock tube problem, a classical benchmark for compressible flow-using both single and double distribution function formulations across one- and two-dimensional lattice stencils. A MATLAB-based solver was developed to model the flow under isothermal conditions and compared to the analytical solution using the L2 norm error. The one-dimensional models achieved …

Exploring Red Palm Oil As A Sustainable Plasticizer For Carbon Black-Filled Ssbr/Br Tire Tread Compounds: A Comparative Evaluation Of Commercial Alternatives, Norma Arisanti Kinasih, Mohamad Irfan Fathurrohman, Santi Puspitasari, Dewi Kusuma Arti, Abdulhakim Masa

Journal of Materials Exploration and Findings

This study investigates the application of red palm oil (RPO) as an alternative vegetable oil resource to substitute petroleum-based plasticizers, which have environmental and health concerns, in carbon black (CB)-filled SSBR/BR tire tread compounds. The plasticizing effects of RPO were thoroughly evaluated by comparing them with a commercial bio-based plasticizer, Epoxidized Soybean Oil (ESBO), and two safer petroleum-based oils, Naphthenic Oil (NYNAS) and Treated Distillate Aromatic Extract (TDAE). The initial investigation shows that fatty acid composition is imposing regarding the plasticizing effect. The higher unsaturated fatty acid content in RPO than in ESBO improved tensile strength and degraded rolling resistance …

Metallurgical Investigation Of A Modified Eye Bolt Failure Caused By Improper Weld Extension, Specification Deviation, And Crevice Corrosion, Dimas Muhammad Fawwaz, Reza Miftahul Ulum, Johny Wahyuadi Soedarsono, Yudha Pratesa

Journal of Materials Exploration and Findings

A modified eye bolt from the David Arm Manhole Storage Tank underwent thorough metallurgical study due to the consequences of the bolt's malfunction during operation. Safety issues arose when the manhole door detached during operation. The mechanical testing and chemical composition analysis of the bolts indicated they were manufactured from an ASTM A193 Grade B7 material used for high-temperature bolting. This material did not conform to the engineering drawing, which mentioned SA 563A, which is about nuts, not bolts. This contradiction clearly shows that the eye bolt which was installed does not conform to the intended design. Welded connections of …

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

From Code To Cube: Interactive Fluid Simulation With Real Time Motion Control, Dominic Ziccardi, Carter Groezinger

Discovery Day - Daytona Beach

This research project explores the use of FluidX3D, an open-source lattice Boltzmann method (LBM) solver, to simulate fluid behavior within a three-dimensional cube container. The system supports both standard water models and rheoscopic fluid visualization, allowing detailed observation of complex flow dynamics in real time. The simulation accurately represents fluid motion, gravity-driven behavior, and rotational response within a bounded cubic domain. The longterm objective is to extend this digital simulation into a physical installation consisting of six synchronized square displays arranged to form a cube. This configuration will create a volumetric illusion of fluid occupying a tangible, handheld structure. An …

Extending The Essentially Entropic Lattice Boltzmann Method To Three-Dimensional Turbulent Flows, Michael Derderian

Discovery Day - Daytona Beach

The Entropic Lattice Boltzmann Method (EELBM) has demonstrated strong numerical stability and accuracy for two-dimensional simulations, particularly at higher resolutions where the entropic formulation introduces only minimal stabilizing turbulent viscosity and eventually converges to the Lattice Bhatnagar–Gross–Krook (LBGK) formulation. This built-in stabilization can be interpreted as an implicit large-eddy simulation (LES) model, allowing EELBM to capture complex turbulent behavior without requiring explicit subgrid-scale closures. While these advantages have been thoroughly validated in 2D, understanding how the entropic constraint regulates dissipation in three dimensions is essential for assessing EELBM’s suitability for practical, turbulence-dominated applications. This work focuses on the development and …

Multi-Dimensional Particle-In-Cell With Monte Carlo Collisions (Pic-Mcc) Simulation For Visualizing Plasma Flow And Secondary Ionization In Constricted-Anode Geometries, Parth Thakar

Discovery Day - Daytona Beach

Constricted-anode plasma sources generate locally intensified electric fields that enhance ionization near the anode, making them valuable in propulsion and laboratory plasma systems. However, the narrow geometry produces complex charge accumulation and secondary ionization effects that remain difficult to measure experimentally. To address this challenge, our research develops and applies a multi-dimensional Particle-in-Cell with Monte Carlo Collisions (PIC-MCC) simulation of a DC discharge in 1-D, 2-D, and 3-D configurations that model a constricted-anode device. PIC-MCC is a first-principles method that tracks electrons and ions individually while computing self-consistent electric fields and incorporating energy-dependent collision processes. This approach enables direct visualization …

Application Of Navier Stokes In Cfd, Hayden Kerkhoff, Gavin Palmer, Garret Seckinger

Discovery Day - Daytona Beach

This project investigates the use of 2-Dimensional Computational Fluid Dynamics (CFD) to analyze aerodynamic behavior, then compare data with the numerical solution of the Navier–Stokes equations run by MATLAB. By leveraging open‑source and possible industry CFD platforms—including OpenFOAM and commercial solvers such as ANSYS Fluent and Inventor Professional—the study evaluates how computational methods simulate, optimize, and predict key aerodynamic quantities such as lift, drag, stall angle, and Reynolds number.   The project focuses on modeling an airflow over specific parameters, such as different angles of attacks and ISA Atmospheric Conditions. Parametric variations in density, angle of attack, chord length, and temperature …

Contemporary Cybersecurity Challenges In Emerging Technologies: A Systematic Literature Analysis, Faztudo Languisse Prof

Journal of Cybersecurity Education, Research and Practice

The accelerating convergence of artificial intelligence (AI), the Internet of Things (IoT), cloud computing, blockchain, and quantum computing has fundamentally transformed the global threat landscape, introducing cybersecurity challenges of unprecedented complexity and scale. This systematic literature review synthesizes findings from peer-reviewed publications, institutional reports, and regulatory documents published primarily between 2020 and 2025 to provide an integrated analysis of contemporary cybersecurity challenges across five key emerging technology domains. The review identifies critical vulnerabilities inherent to each domain, documents the evolution of threat actors and attack methodologies — including AI-powered ransomware, adversarial machine learning, and harvest-now-decrypt-later quantum attacks — and evaluates …

Evaluating Optimal Capacity And Investment Strategies For Renewable Energy Projects: A Combined Technical And Financial Approach, Helen Josephine, Indhumathi Shanmugasundaram, Sharad Gupta, Manjari Sharma

Northeast Journal of Complex Systems (NEJCS)

The global shift toward clean energy is accelerating, and by 2050 renewable sources are expected to supply more than 85% of the world’s electricity. This transition, however, introduces new layers of complexity. Wind and solar energy behave as interconnected subsystems whose output fluctuates with weather, season, and geography. Their interaction with fixed hourly demand, capital-intensive investments, and financing structures creates a multi-dimensional system in which small changes can trigger significant operational and economic consequences.  This study presents a simulation-driven framework designed to understand and optimize this complex behaviour. The framework models hourly wind and solar generation alongside projected demand to …

Improving Semantic Precision In Text-To-Image Diffusion Models Via Latent-Space Optimization And Semantically-Parsed Evaluation, Mohammad Rouie Miab

McKelvey School of Engineering Graduate Student Theses & Dissertations

Text-to-image diffusion models can produce visually impressive images from natural-language prompts, but they often fail to satisfy the detailed semantic constraints expressed in compositional prompts. Typical failure modes include omitted objects, merged entities, incorrect quantities, incorrect attribute binding, and leakage of one entity's attributes onto another. This thesis studies the problem of semantic precision in text-to-image generation: how faithfully a generated image satisfies the structured meaning of its prompt.   The thesis makes two linked contributions. First, it presents a training-free inference-time refinement method for diffusion-based image generation. The method operates directly in latent space during denoising and uses noun-phrase-aware cross-attention …

Turbulent Plenum Jet-Crossflow Validation Via Subgrid Scale Model Variation And Upstream Forcing Under Dynamic Hybrid Rans-Les, Cole W. Mccallum

Mechanical Engineering Undergraduate Honors Theses

In modern gas turbine design, film cooling has become ubiquitous as a method for limiting heat transfer between high temperature gases post-combustion and the surface of downstream blades. This paper validates the use of various computational fluid dynamics techniques in recreating an experiment measuring adiabatic effectiveness over a surface downstream of a compound-angle N2 plenum jet incident on a turbulent-air boundary layer [1]. To do this, both RANS and Dynamic Hybrid RANS-LES (DHRL) methods are implemented and compared to previous research [2]. The latter method is then modified through implementation of a different subgrid scale (SGS) model and through addition …

Hdra-Fusion: Hybrid Detection With Routed Architecture For Manipulation-Aware Ai Face Forgery Detection, Omar Ebeid

Theses and Dissertations

With the rapid advancements in artificial intelligence-based image generation and manipulation tools, it is extremely difficult to detect if an image is genuine or artificially crafted. Despite extensive research in this area, existing image detection systems suffer from three major problems: suboptimal cross-dataset generalization due to shortcut learning of dataset-specific patterns, unreliable probability estimates due to domain shift, particularly in cross-manipulation evaluation settings, and an inability to detect images manipulated by multiple types of manipulations within a single detection framework. To address these limitations, we propose HDRA-Fusion (Hybrid Detection with Routed Architecture), a framework built on the conclusion that different …

The Digital Neuron: Neural Cellular Automata For Neural–Symbolic Translation, Nicole Assenza

SMU Data Science Review

A neural cellular automata (NCA) architecture, referred to as Pluto’s NCA, was developed to characterize bilateral communication and semantic reciprocity between symbolic representations and a spatially distributed update field. The architecture employs an encoder–automata–decoder pipeline that maps symbolic inputs into a multichannel state field and reconstructs them through agreement-driven attractor convergence within a stable semantic attractor landscape. System behavior was evaluated under controlled perturbations, including rhythmic desynchronization, graded ablations, correlated and independent noise, and percolation-based structural degradation. Quantities such as Agreement(t), internal coherence Aᵢ(t), the recovery time constant τ, and the critical percolation threshold pc were measured to assess stability, …

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Numerical Study Of Nutrient Mixing In Trabecular Bone In Microgravity, Disuse And Normogravity, Sagar Gharti

Doctoral Dissertations and Master's Theses

Mechanical loading is known to regulate bone remodeling by driving interstitial fluid flow which stimulates cells and drives nutrient transport within the trabecular network. In microgravity, the absence of mechanical stimulation or loading suppresses convective flow processes, causing diffusion-driven nutrient mixing and renewal, and accelerated bone loss. This thesis investigates how oscillation frequency and trabecular bone density jointly control nutrient mixing and wall shear stress within trabecular cavities.

A computational fluid dynamics (CFD) framework is developed in STAR-CCM+ using a soft-cap oscillation model that mimics cyclic compression. Three idealized trabecular morphologies are simulated across different frequencies to represent microgravity or …

A Virtual-Reality-Based Dental Simulator For Endodontics With Automated Formative Feedback, Yousef Salah Abo El Ela

Theses and Dissertations

Advancements in virtual reality (VR) and haptic technology are transforming the landscape of medical and dental education, offering new avenues for safe, immersive, and repeatable training experiences. Within dentistry, endodontics presents unique challenges for preclinical education due to anatomical complexity, limited access to extracted teeth, ethical concerns, and the shortcomings of conventional plastic models. Despite endodontics specific plastic teeth being available, they fall short of replicating the hardness of real extracted teeth, are relatively costly compared to generic plastic teeth, and are ultimately a disposable item which makes them inadequate as a sustainable long-term solution. Extracted teeth do a much …

Microgravity-Induced Alterations In Left Atrial Hemodynamics And Thrombogenic Risk: Insights From Healthy And Atrial Fibrillation Models, Grace M. Hoeppner

Dissertations, Master's Theses and Master's Reports

Background: Microgravity exposure alters cardiovascular loading, yet its impact on left atrial flow dynamics and thrombotic risk remains poorly understood. This study investigates how spaceflight-relevant microgravity-induced changes in cardiac outflow affect left atrial hemodynamics in healthy individuals and patients with atrial fibrillation.

Methods: Patient-specific left atrial models were generated for three healthy individuals and three AF patients. Computational fluid dynamics (CFD) simulations were performed using each patient’s baseline mitral outflow waveform and two modified waveforms representing short- and long-duration post-flight cardiac loading changes derived from echocardiographic observations. Hemodynamic metrics included left atrial velocity, time averaged wall shear stress, oscillatory shear …

Computational And Ai Frameworks For Identifying Key Regulatory Genes And Their Target Genes In Plants And Humans, Md Khairul Islam

Dissertations, Master's Theses and Master's Reports

This dissertation presents computational and AI-driven frameworks for identifying key regulatory genes and their downstream targets across plant and human biological systems. Three studies address distinct challenges in genomic regulation using advanced machine learning and bioinformatics approaches.

The first study introduces DyGAF (Dynamic Gene Attention Focus), a dual-attention transformer framework that identifies and ranks disease-relevant biomarker genes by simultaneously modeling independent molecular responses and interdependent regulatory network behavior. Two attention models provide complementary perspectives on gene importance and are fused through a novel combination metric. Applied to COVID-19 nasopharyngeal swab profiles, the attention-weighted representations achieved 94.23% classification accuracy, high sensitivity, …

A Novel Federated Llm Framework For Distributed Traffic Modelling In Intelligent Transportation Systems, Seerat Kaur

Theses and Dissertations (Comprehensive)

Intelligent transportation systems (ITS) depend on accurate traffic prediction to support congestion management, infrastructure planning, and real-time operational decisions. Despite substantial progress in data-driven forecasting, several challenges continue to limit practical deployment: traffic data is distributed across independent regional authorities, making centralized aggregation infeasible, standard federated aggregation strategies ignore traffic-specific characteristics that meaningfully affect model quality, and existing models produce only numerical outputs without interpretable reasoning that urban planners can act upon. This thesis addresses these challenges through four contributions that collectively advance privacy-preserving, explainable, and scalable traffic forecasting.

The first contribution provides a systematic review of 129 peer-reviewed publications, …

Analysis Of Leakage In Nearshore Pipelines Using Fitness For Service Method To Ensure Mechanical Integrity Based On Api-579 Level 3, Elriandri Elriandri, Dedi Priadi

Journal of Materials Exploration and Findings

The Fitness for Service (FFS) analysis is performed as a quantitative assessment to evaluate the integrity condition of a pipeline. Essentially, FFS assessment helps determine whether equipment components can operate safely despite existing deficiencies. This evaluation is carried out using the Finite Element Method (FEM). In the case of an underwater pipeline that experiences leak due to anchor pull at the flange connection, it undergoes plastic deformation and is lifted approximately 1 meter. As a mitigation step, inspection and repairs have been carried out by the company. Subsequently, modeling is performed to reconstruct the deformation process of the pipeline. Then, …

Assessment Of The Melt Quality Of A 30% Scrap Adc12 Aluminium Alloy Using The Inclusion And Fluidity Measurement Instrument (Ifmi) With Mullite Ceramic Filters, Gusti Ruri Ruri Lestari, Sandya Ananda Riswan, Muhammad Anis, Ahmad Ashari, Paramita Vidya Ayuningtyas, Bambang Suharno Prof, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The increasing demand for sustainable practices in the metal casting industry has driven the use of recycled aluminum alloys such as ADC12. However, the addition of aluminum scrap tends to increase oxide inclusions, which reduce melt fluidity and compromise casting quality. This study utilizes the Inclusion and Fluidity Measurement Instrument (IFMI), equipped with mullite ceramic filters, to assess the melt quality of ADC12 aluminum alloy containing 30% scrap. Fluidity and inclusion characteristics were evaluated at five pouring temperatures (660°C, 680°C, 700°C, 720°C, and 740°C). The results show that fluidity increased with temperature, reaching a peak of 84.6 g·s⁻¹ at 740°C, …

Equipment Criticality Analysis To Determine Asset Integrity Management System Scheme In Supporting Production Optimization Scenarios In The Aeging Field, Donny Andryanto, Donanta Dhaneswara

Journal of Materials Exploration and Findings

This research investigates the production decline and cost increase in the X&Y oil and gas fields from 2022 to 2023. Production fell by 34%, while production costs per barrel rose by 79%. To address these issues, a series of optimization processes are proposed. These aim to restructure and enhance the production facilities to reduce current production costs. The optimizations include reducing pressure at the PPP Platform in 2024. Additional steps include shutting down CPP-ORF 14” pipelines and most processes at CPP 2 Platform by 2027 to convert it into an accommodation platform. Further, the plan involves optimizing the release of …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Prism (Proxy Recognition And Inclusion Scoring Method), Destiny Raburnel, Crystal Tubbs, Md Abdullah Al Hafiz Khan

Symposium of Student Scholars

AI-driven automated hiring tools are reshaping how companies find talent, but they often reproduce the hidden biases embedded in their training data. Our project, PRISM (Proxy Recognition and Inclusion Scoring Method), investigates how subtle demographic signals, specifically first names associated with gender and race, influence AI resume screening even when candidates have identical qualifications. We built a controlled dataset of resumes that are identical in every way except for the applicant's first name, with each resume using a racially neutral surname to isolate how first names alone affect scoring. We tested these resumes against job postings in technology, healthcare, and …

A Predictive Model For Multi- Week Respiratory Risk From Red Tide On Florida’S Gulf Coast., Elmer S. Ochaeta

Computer Science and Engineering Faculty Publications

Florida’s Gulf Coast red tide (Karenia brevis) can put toxins into the air, making people cough, irritating the throat, and worsening asthma or other breathing problems especially when winds blow from the ocean toward the beach. Right now, most public updates don’t really help with the question people actually ask when planning a weekend or vacation: “Will going to or close to the beach be risky in the next few weeks?”.

In this project, I build a weekly early warning system that estimates respiratory risk for specific beaches and predicts that risk 2 to 4 weeks ahead. The study covers …

Iso-Detr: A Novel Detection Transformer For Industrial Small Object Detection, Faisal Saeed, Anand Paul

School of Public Health Faculty Publications

Effectively detecting and assessing real-time structural and ecological parameters in contemporary manufacturing environments poses significant challenges, particularly in identifying minute objects within product images. The swift evolution of the industrial sector underscores the necessity for intelligent manufacturing environments to uphold stringent product quality standards. However, accelerating production processes at high speeds heightens the risk of defective product outcomes. This research addresses the challenges inherent in small object detection within industrial contexts, proposing an innovative detection transformer model tailored to modern manufacturing environments. The proposed model integrates a feature-enhanced multi-head self-attention block (FEMSA), merging cross-channel communication network and multiple multi-head self-attention …

Universal Systems Simulation Via Constraint Hypergraphs With Applications To Digital Twins, John Morris

All Dissertations

The characterization of systems encompasses a variety of modeling frameworks designed to capture specific behaviors and components of various system domains. Whatever the framework, the core elements of a system representation are the information of the system and a description of how that information is related. The relations in deterministic systems are functions, which, when composed to form executable processes, can be used to simulate system data. A declarative modeling framework is one that encodes mechanisms for preparing these simulations within the model structure, allowing an external agent to form the execution processes required for a given context. To date, …