Computational Engineering Commons^™

Design And Comparison Of Immersive Interactive Learning And Instructional Techniques For 3d Virtual Laboratories, Shuo Ren

Computational Modeling & Simulation Engineering Theses & Dissertations

Virtual reality (VR) as a learning environment plays an important role m engineering education. Utilizing the VR learning environment as a supplement to engineering-based laboratories is especially beneficial for students to prepare for the physical experiment and to grasp the experiment objectives and procedures. Such a methodology can also play a significant role in distance education.

This work presents the methodology design for the physical-to-virtual transformation of two undergraduate mechanical engineering laboratory experiments, namely the "Jet Impact Force on Vanes (Jet Force Lab)" and the "Elastic Test of a Beam in Pure Bending (Beam Bending Lab)" at Old Dominion University. …

Orientation-Invariant Ecg-Based Virtual Pathology Stethoscope Tracking For Standardized Patient Heart Auscultation, Nahom B. Kidane

Computational Modeling & Simulation Engineering Theses & Dissertations

Cardiac auscultation (CA), the act of listening to the heart sounds, is a critical physician's skill that provides substantial information for diagnosing many cardiovascular disorders; therefore, competent training can be a key for accurate and reliable diagnosis. The teaching of CA has been an area of recognized importance since the inception of the stethoscope. However, recent changes in health-care, such as limited student access to patients and higher reliance on competing technologies have made it challenging to teach bedside CA techniques.

Over the past few decades, standardized patients (SPs), individuals trained to portray real patients, have been widely used for …

Primitivec-Adl: Primitive Component Architecture Description Language, Basel Magableh

Articles

In this paper, we introduce an architecture descrip- tion language (ADL) for PCOMs (a context oriented component model). The language is described at three levels: (1) Building blocks (PCOMs context oriented components types) (2) Connec- tors, which connect components externally and internally, and (3) Architectural Configuration, which includes a full description of composition and decomposition mechanisms.

The contribution is designing ADL. That supports context- orinted component by providing new architecture elements, which fulfil the requirements of designing context oriented component based applications. Context oriented component is a behavioural unit composed of static parts and dynamic parts. A PCOMs component model …

Tweeting For Learning: A Critical Analysis Of Research On Microblogging In Education Published In 2008-2011, Fei Gao, Tian Luo, Ke Zhang

Visual Communications and Technology Education Faculty Publications

This study critically analyzed the current body of published research on microblogging in education (MIE) to build a deep and comprehensive understanding of this increasingly popular phenomenon. Twenty-one studies on MIE in 2008-2011 were selected based on the selection criteria and analyzed to answer the following questions: (a) What types of research have been published on MIE? (b) How was microblogging used for teaching and learning in these studies? (c) What educational benefits did microblogging have on teaching and learning? and (d) What suggestions and implications did the current research have for future MIE research and practices? The analysis suggested …

Mesh Generation Using A Correspondence Distance Field, Nicholas Szapiro

Masters Theses and Doctoral Dissertations

The central tool of this work is a correspondence distance field to discrete surface points embedded within a quadtree data structure. The theory, development, and implementation of the distance field tool are described, and two main applications to two-dimensional mesh generation are presented with extension to three-dimensional capabilities in mind. First is a method for surface-oriented mesh generation from a sufficiently dense set of discrete surface points without connectivity information. Contour levels of distance from the body are specified and correspondences oriented normally to the contours are created. Regions of merging fronts inside and between objects are detected in the …

Analysis And Implementation Of A High-Order Reconstruction Algorithm For An Unstructured Finite Volume Flow Solver, Shane Edmond Sawyer

Masters Theses and Doctoral Dissertations

A high-order scheme is examined an implemented in an unstructured solver. The motivation for this researcher is driven by research goals to simulate field equations, particularly those of fluid dynamics, with high fidelity. High-order schemes overcome computational limitations by computing comparable solutions on grids that are coarser than grids required by a second-order flow solver. The scheme was chosen based on two criteria. The first being that it is well documented in the literature for two-dimensional flow solvers. The second is that the scheme is extendable to the framework used in the Tenasi flow solver developed at the University of …

A Multi-Paradigm Modeling Framework For Modeling And Simulating Problem Situations, Christopher James Lynch

Computational Modeling & Simulation Engineering Theses & Dissertations

Problem situations are problems whose specifications are not universally agreed upon making them a challenge to be modeled and simulated. Models of problem situations depart from the premise of well-defined problems, problems where stakeholders disagree, but also modelers' interpretations play a role in their design and computer implementation.

This thesis proposes a multi-paradigm modeling framework for modeling and simulating problem situations in order to explore the problem space of the problem situations and answer specific modeling questions.

The proposed framework implements the Modeling and Simulation (M&S) System Development Framework (MS-SDF), which is a methodology for modeling a problem situation while …

Clearing Paths For Emergency Vehicles Using Shock Wave Theory And Vehicle-To-Vehicle Communication, Craig Austin Jordan

Computational Modeling & Simulation Engineering Theses & Dissertations

A new strategy to enable an EV to navigate through congestion at signalized intersections more efficiently has been developed and is presented in this thesis. The proposed strategy involves communicating control messages to vehicles to change their driving behavior and to traffic signals to change their timing plans so that EV s can proceed through congested intersections as quickly as possible. To achieve this, specific vehicles are instructed to hold their positions to create a split in the vehicle queue at a critical location in one lane. The split allows the EV to change lanes and proceed unimpeded at its …

Extended Pcr Rules For Dynamic Frames, Florentin Smarandache, Jean Dezert

Branch Mathematics and Statistics Faculty and Staff Publications

In most of classical fusion problems modeled from belief functions, the frame of discernment is considered as static. This means that the set of elements in the frame and the underlying integrity constraints of the frame are fixed forever and they do not change with time. In some applications, like in target tracking for example, the use of such invariant frame is not very appropriate because it can truly change with time. So it is necessary to adapt the Proportional Conflict Redistribution fusion rules (PCR5 and PCR6) for working with dynamical frames. In this paper, we propose an extension of …

Efficient Algorithms For Fast Integration On Large Data Sets From Multiple Sources, Tian Mi, Sanguthevar Rajasekaran, Robert H. Aseltine

Open Access Author Fund Awardees' Articles

Background

Recent large scale deployments of health information technology have created opportunities for the integration of patient medical records with disparate public health, human service, and educational databases to provide comprehensive information related to health and development. Data integration techniques, which identify records belonging to the same individual that reside in multiple data sets, are essential to these efforts. Several algorithms have been proposed in the literatures that are adept in integrating records from two different datasets. Our algorithms are aimed at integrating multiple (in particular more than two) datasets efficiently.

Methods

Hierarchical clustering based solutions are used to integrate …

Real-Time Musical Analysis Of Polyphonic Guitar Audio, John E. Hartquist

Master's Theses

In this thesis, we analyze the audio signal of a guitar to extract musical data in real-time. Specifically, the pitch and octave of notes and chords are displayed over time. Previous work has shown that non-negative matrix factorization is an effective method for classifying the pitches of simultaneous notes. We explore the effect of window size, hop length, and other parameters to maximize the resolution and accuracy of the output.

Other groups have required prerecorded note samples to build a library of note templates to search for. We automate this step and compute the library at run-time, tuning it specifically …

High Fidelity Thermocline Tracking Algorithm Using Weighted Essentially Non-Oscillatory Schemes, Claudia L. Guevara^, Kiran Kumar, Vinod Kumar*

COURI Symposium Abstracts, Spring 2012

No abstract provided.

Smart Home Prototype, Logistics & Planning, David G. Guzman^, Virgilio Gonzalez*

COURI Symposium Abstracts, Spring 2012

No abstract provided.

The Implementation Of A Visco-Hyperelastic Numerical Material Model For Simulating The Behaviour Of Polymer Foam Materials, Conor Briody, Barry Duignan, Stephen Jerrams, John Tiernan

Articles

Polyurethane foam has been in use for some time in wheelchair seating systems as it offers good pressure relieving capabilities in most cases. However, little characterisation work has gone into seating foam materials by comparison with conventional elastomeric materials. Accurate material models could allow better prediction of foam in-service behaviour, which could potentially improve seating design practises. The objective of this work was to develop an approach for the validation of hyperelastic and viscoelastic material model parameters used to simulate polyurethane foam behaviour. Material parameters were identified from relevant test procedures and implemented in a Finite Element simulation of an …

Health Nexus: A Serious Game Prototype For Prevention And Treatment Of Obesity And Diabetes, Joseph C. Miller

Computational Modeling & Simulation Engineering Theses & Dissertations

Electronic games are a prevalent phenomenon of American culture and entertainment. Serious games are video games that take advantage of games' intrinsic entertaining and challenging characteristics for serious purposes, such as education, training, advertisement, and political campaigns. A significant number of serious games have been developed for a variety of diverse purposes. The last few years have witnessed the inception and growth of motion sensing technologies for games, including Nintendo Wii, Sony PlayStation Move, and Microsoft Kinect. These motion sensing technologies usually require game players' physical body movement in order to perform and achieve in the games, such as playing …

Trust And Reputation For Successful Software Self-Organisation, Pierpaolo Dondio, Jean Marc Seigneur

Books/Book Chapters

Abstract An increasing number of dynamic software evolution approaches is com- monly based on integrating or utilising new pieces of software. This requires reso- lution of issues such as ensuring awareness of newly available software pieces and selection of most appropriate software pieces to use. Other chapters in this book dis- cuss dynamic software evolution focusing primarily on awareness, integration and utilisation of new software pieces, paying less attention on how selection among different software pieces is made. The selection issue is quite important since in the increasingly dynamic software world quite a few new software pieces occur over time, …

Openness, Intellectual Property And Standardization In The European Ict Sector, Carl Mair

IP Theory

No abstract provided.

A Class Of Discontinuous Petrov–Galerkin Methods. Part Iii: Adaptivity, Leszek Demkowicz, Jay Gopalakrishnan, Antti H. Niemi

Mathematics and Statistics Faculty Publications and Presentations

We continue our theoretical and numerical study on the Discontinuous Petrov–Galerkin method with optimal test functions in context of 1D and 2D convection-dominated diffusion problems and hp-adaptivity. With a proper choice of the norm for the test space, we prove robustness (uniform stability with respect to the diffusion parameter) and mesh-independence of the energy norm of the FE error for the 1D problem. With hp-adaptivity and a proper scaling of the norms for the test functions, we establish new limits for solving convection-dominated diffusion problems numerically: for 1D and for 2D problems. The adaptive process is fully automatic and starts …

Formalising Human Mental Workload As Non-Montonic Concept For Adaptive And Personalised Web-Design, Luca Longo

Books/Book Chapters

Web Design has been evolving with Web-based systems becoming more complex and structured due to the delivery of personalised information adapted to end-users. Although information presented can be useful and well formatted, people have little mental workload available for dealing with unusable systems. Subjective mental workload assessments tools are usually adopted to measure the impact of Web-tasks upon end-users thanks to their ease of use and are aimed at supporting design practices. The Nasa Task Load Index subjective procedure has been taken as a reference technique for measuring mental workload, but it has a background in aircraft cockpits, supervisory and …

Computation Of The Stochastic Volatility And Levy Index Using The Kolmogorov-Feller Equation With Applications To Carbon Price Data Analysis, Jonathan Blackledge, Marc Lamphiere, Afshin Panahi

Articles

We derive new algorithms for computing time variations in the Stochastic Volatility and the L´evy index using a standard financial price model and a Green’s function solution to the Kolmogorov-Feller equation. A principal condition upon which the algorithms are based is the Phase Only Condition which allows the Power Spectral Density Function of a financial time series (specifically the log price differences) to be taken to be a constant. The paper is composed of four component parts: (i) the Stochastic Volatility is derived and studied numerically; (ii) the Kolmogorov-Feller equation is studied and solved to provide a model for the …

Data Exploration Interface For Digital Forensics, Varun Dontula

LSU New Orleans Theses and Dissertations

The fast capacity growth of cheap storage devices presents an ever-growing problem of scale for digital forensic investigations. One aspect of scale problem in the forensic process is the need for new approaches to visually presenting and analyzing large amounts of data. Current generation of tools universally employ three basic GUI components—trees, tables, and viewers—to present all relevant information. This approach is not scalable as increasing the size of the input data leads to a proportional increase in the amount of data presented to the analyst.

We present an alternative approach, which leverages data visualization techniques to provide a more …

Clinical Coverage Of An Archetype Repository Over Snomed-Ct., Sheng Yu, Damon Berry, Jesus Bisbal

Articles

Clinical archetypes provide a means for health professionals to design what should be communicated as part of an Electronic Health Record (EHR). An ever-growing number of archetype definitions follow this health information modelling approach, and this international archetype resource will eventually cover a large number of clinical concepts. On the other hand, clinical terminology systems that can be referenced by archetypes also have a wide coverage over many types of health-care information.

No existing work measures the clinical content coverage of archetypes using terminology systems as a metric. Archetype authors require guidance to identify under-covered clinical areas that may need …

Architecture For A Flexible And Scalable Simulation Engine, Robert C. Holcomb Jr.

Computational Modeling & Simulation Engineering Theses & Dissertations

Simulation is used by many different industries to gain insight on actions and decisions that may be too dangerous or costly to perform in reality. Although the use of computers to assist with modeling and simulation has been studied for quite a while, computer infrastructure, hardware, and capabilities are changing at a rapid pace. Computer software once written is difficult and costly to change, especially in order to take advantage of the advances in computer hardware. This thesis focuses on the design and implementation of a software simulation architecture that allows flexibility in the modeling conducted and scalability in the …

A Google Earth-Based Framework For Visualization Of The Chesapeake Bay Operational Forecast System, Gary Lawson

Computational Modeling & Simulation Engineering Theses & Dissertations

For the persons who live near and travel the waters of the Chesapeake Bay, the data provided by the Chesapeake Bay Operational Forecast System (CBOFS) is invaluable. The information provided includes measurements and forecasts of surface wind velocity, water current velocity, salinity levels, water level, and temperature. Currently, this information is freely available on the CBQ_FS website hosted by the National Oceanographic and Atmospheric Administration (NOAA). It is offered as Nowcast, measured data, and Forecast data and is visualized using 2D images which describe a subset of the data in an easy to read chart. However, if the data were …

Wii Remote-Based Collaborative Interfaces For Music, Adriano Baratè, Luca A. Ludovico, Davide Andrea Mauro

Computer Sciences and Electrical Engineering Faculty Research

Wii Remote is the main controller for Nintendo's Wii con- sole. Thanks to the use of accelerometer and optical sensor technology, it presents motion sensing capability, which implies gesture recognition and intuitive pointing. Such a controller is user-friendly, inexpensive and easily available, due to growing Wii console's popularity. These features make Wii Remote a good device to create and manipulate both music and audio in a home entertainment environment. In this paper, the most interesting characteristics of the controller will be reviewed. A case study will be presented, namely the creation of a virtual music instrument to be controlled in …

Accurate Estimation Of Isoform And Gene Expression Levels From Next Generation Sequencing Data, Marius Nicolae

Master's Theses

Massively parallel transcriptome sequencing is quickly replacing microarrays as the technology of choice for performing gene expression profiling due to its wider dynamic range and digital quantitation capabilities. However, accurate estimation of expression levels from sequencing data remains challenging due to the short read length delivered by current sequencing technologies and still poorly understood protocol- and technology-specific biases.

To date, two main transcriptome sequencing protocols have been proposed in the literature. The most commonly used one, referred to as RNA-Seq, generates short (single or paired) sequencing tags from the ends of randomly generated cDNA fragments. An alternative protocol, referred to …

Testing, Modelling And Validation Of Numerical Model Capable Of Predicting Stress Fields Throughout Polyurethane Foam, Conor Briody, Barry Duignan, Stephen Jerrams

Conference Papers

Wheelchair seating systems are specialised for a number of reasons as users can have impaired mobility, which increases the possibility of pressure build up. These areas of high pressure frequently occur in the trunk region under the bony prominences known as the Ischial Tuberosities (IT), pressure ulcers may occur consequently. Polyurethane foam has been in use for some time in wheelchair seating systems as it exhibits good pressure relieving capabilities in most cases. However, little quantitative research has gone into foamed polymers, in comparison with conventional elastomeric materials. This lack of knowledge can ultimately lead to more time being spent …

Quantitative Characterization Of Microstructure Features For 1st Generation Advanced High Strength Steels, Margarita Vidrio, Ellen Liu, Donsheng Li, Kyoo Sil Choi, Xin Sun

STAR Program Research Presentations

The role of Advanced High Strength Steels (AHSS) in the automotive industry is important because of its affordability and excellent mechanical properties. The 1st generation of AHSS achieves its preferred combination of strength and ductility by embedding harder martensite grains into softer ferritic matrix. Ductility and strength of these steels are important to safety, formability, application, and life. However, a noticeable degree of inconsistent forming behaviors has been observed in the 1st generation AHSS in production, which seems to be related to the microstructure-level inhomogeneity. The objective of this project is to grain fundamental understandings on how different microstructure level …

Generation And Optimization Of Spacing Fields, Max David Collao

Masters Theses and Doctoral Dissertations

Meshes are used to discretize space for computational fluid dynamics (CFD) simulations. Mesh adaptation through refinement and smoothing can improve the accuracy of the CFD solution. In order to perform adaptive refinement or smoothing a spacing field is needed to define the desired edge sized in mesh. The objectives of this research are to generate spacing fields from existing CFD solutions and optimize this spacing information for efficient use by programs to perform adaptive refinement or smoothing. All work was done on 2D meshes with the intention of gaining knowledge and experience for later application to 3D meshes. The program …

Computational Design For Electromagnetic Simulations, Ryan Steven Glasby

Masters Theses and Doctoral Dissertations

An automatic computational procedure has been developed to efficiently and accurately design the shape of complicated electromagnetic objects. These electromagnetic objects can be simulated for operation at high frequencies (~10 GHz), and can be comprised of dissimilar materials. The automated design procedure consists of linking together an original electromagnetic field simulation tool, an original adjoint routine for obtaining sensitivity derivatives, and an original grid-smoothing tool with an existing optimization package. The electromagnetic field simulation software employs a temporally and spatially higher-order accurate Streamline Upwind/Petrov-Galerkin finite-element method that numerically solves Maxwell’s equations in the time domain using implicit time stepping. The …