Construction Engineering and Management Commons^™

Section Form Of Open-Cut Tunnel By Ultra-Large-Diameter Shield Empty-Push Technology, Sun Chao, Zhang Guangwei

Journal of China & Foreign Highway

Based on the engineering background of the open-cut section by the shield machine with overall movement in the rapid transformation project of Wanghai Road,Shenzhen City,the structural stress and economy of three types of section forms under construction and operation conditions were analyzed to determine the optimal section design.The load-structure model was used to analyze the parameters affecting the internal force of the optimal section.The research results show that the top and bottom plates and side walls in the scheme with ribs set at the corner (scheme 3) have uniform force,and force during the construction period is close to that during …

Application Of Superelevation Detection Technology In Ship Collision Prevention System Of Cross-Sea Bridges, Song Xiaodong, Duan Min, Ren Quanli, Hu Jianan, Yang Naiheng, Chen Jingwen, Tong Jianrong

Journal of China & Foreign Highway

Cross-sea bridges are an important component of national infrastructure and an important regional transportation hub,which have a significant impact on economic development,regional integration,and cultural exchange.Ship superelevation is an important factor that threatens the safety of bridges.Therefore,superelevation detection is an important means to improve the service level of channel navigation,standardize the navigation order of ships in the water area near the bridge,and enhance the ship collision prevention ability of bridges.This paper conducted theoretical analysis and engineering feasibility research on superelevation detection by using laser alignment,laser ranging,optoelectronic detection,LiDAR detection,and machine vision.According to the superelevation detection requirements of the Hong Kong-Zhuhai-Macao Bridge,two technical …

Industrial Design And Economic Analysis Of Steel Box Girder Bridge With Conventional Span, Cui Bing, Chen Kun

Journal of China & Foreign Highway

To improve the industrial construction level of steel bridges,a prefabricated continuous steel box girder bridge was designed in this study,which is suitable for bidirectional four lanes and six lanes with spans ranging from 40 m to 80 m.The overall dimensions and local structures of the steel box girder bridge were determined according to the specifications and engineering experience,and the load-bearing capacity was checked.Modular industrial products were designed by defining the vertical and horizontal modular divisions for the steel box girders,resulting in 21 standardized modular components.Based on the concept of life cycle,an economic analysis of the prefabricated steel box girder bridge …

Mechanism Of Mud Pumping On Plateau Highway Under Traffic Loads And Its Treatment Strategy, Zhang Junhui, Chen Zhide, Gao Feng, Na Qicai, Ma Pengfei, Xiao Lin

Journal of China & Foreign Highway

The dynamic hydraulic response and particle migration of subgrade structures under traffic loads are fundamental to reveal the formation and development mechanisms of mud pumping.The driving mechanism of fine particle migration in the mud pumping state was explored by conducting laboratory tests on layered gravel-sandy silt columns under dynamic loads.The results show that the slurry sloshing causes alternating positive and negative pressure gradients within the gravel layer.This oscillating pressure gradient enhances the pore permeability in the underlying sandy silt layer,providing the necessary hydrodynamic conditions for fine particle migration.Fine particle migration increases the slurry turbidity to a stable value.Upon the removal …

Risk Zoning Of Hazards Along Highways To Xizang Based On Information Model, Liu Weimin, Guo Guanmiao, Cai Qing ’E, Yu Xueyong, Dong Xiaobo, Chen Peicong

Journal of China & Foreign Highway

The frequent occurrence of hazards along the highways in the Qinghai ‒ Xizang Plateau seriously affects road traffic and threatens the security of lives and property of the people.Conducting a risk zoning assessment of hazards along the highways to Xizang is crucial to enhancing hazard prevention and mitigation.This paper summarized the regional geological environment and development patterns of hazards along the highways to Xizang and analyzed the overall performance of highway traffic operations.On this basis,the Xinjiang‒Xizang Highway was taken as the research object,and the evaluation factors were selected based on the regional geological environment and the main controlling factors of …

Influence Of Urease-Induced Calcium Carbonate Precipitation On Frost Heave Characteristics Of Saline Soil, Li Jue, Wen Zili, Liu Zhengnan

Journal of China & Foreign Highway

This study investigated the impact of the soybean urease-induced calcium carbonate precipitation (SICP ) technique on frost heave characteristics of saline soil,specifically addressing the frost heave in saline soil used as a subgrade.The relationships between compaction degree,moisture content,volume ratio of the reaction liquid,and curing temperature with the frost heave rate of treated soil were explored.The results show that SICP significantly reduces the frost heave rate of soil samples by over 28%,with the most noticeable improvement occurring under conditions of higher compaction degree and lower moisture content.Additionally,the increased volume ratio of reaction liquid enhances reaction efficiency,while lower curing temperatures are crucial …

Prediction And Evaluation Of Road Service Performance In Cold Regions Based On Uncertainty Quantification Theory, Liu Yuanyuan, Si Junling, Zheng Hao, Ren Daoju, Fan Shaobing, Quan Lei

Journal of China & Foreign Highway

In cold regions,road service performance is influenced by various nonlinear dynamic factors under complex hydrothermal environments and freeze-thaw cycles.Traditional empirical and mechanical models exhibit significant limitations in comprehensively considering the impacts of complex environments and conducting quantitative analyses.This study proposed a method to predict and assess the service performance of constructed roads in cold regions.The method integrated deep neural networks with uncertainty quantification theory,addressing the inadequacies of existing models in adapting to complex environments and analyzing multiple influencing factors.By utilizing data from Montana road sections in the LTPP database,the study employed deep neural networks to predict the international roughness index …

Permanent Deformation Prediction Model Of Subgrade Soil Under Freeze-Thaw Cycles Based On Lstm And Transformer, Zhang Anshun

Journal of China & Foreign Highway

To accurately predict the permanent deformation of subgrade soil under the coupling effect of freeze-thaw cycles and traffic loads,a hybrid neural network model based on long short-term memory (LSTM ) and Transformer was proposed,building upon the results of dynamic triaxial tests.This model effectively captured the temporal dependencies and complex interactive effects among input variables,thereby significantly enhancing the accuracy and generalization ability of permanent deformation prediction of subgrade soil.The results indicate that higher confining pressure improves the resistance of subgrade soil to deformation,but its permanent deformation behavior is still significantly influenced by the magnitude of cyclic loading and the number of …

Analysis Of Joint Load Transfer Performanc E Of Prefabricated Steel‑Concrete Hollow Pavement Slab, Zhu Guangshan, Dong Zihao, Yang Ye, Wang Jinshan

Journal of China & Foreign Highway

In order to study the joint load transfer capacity of a prefabricated steel-concrete hollow pavement slab,a finite element model was established with ABAQUS to carry out numerical analysis.The variation laws of the maximum deflection value and joint load transfer coefficient of the pavement slab with and without cavitation were compared to analyze the load transfer capacity.The results show that when cavitation occurs in the slab,the load transfer coefficient of the slab decreases with the increase in the cavitation area,but the load transfer coefficient of the slab does not change significantly when the cavitation depth reaches a certain level.When there is …

A Review Of Performance Of Cement- Stabilized Base Materials Containing Recycled Conc Rete Aggregate, Song Chengzhe, Li Jiaquan, Kong Jingxun, Zhou Changjun, An Xing

Journal of China & Foreign Highway

Semi-rigid base offers excellent performan ce and is widely used as a high-grade highway subgrade in China.Currently,with a large stockpile of waste concrete in the country,using it as aggregate in pavement base materials is of great significance for environmental protection,energy conservation,and emission reduction.In this paper,the basic performance indicators of recycled concrete aggregate (RCA ) and the performance of cement-stabilized base materials containing RCA,including strength,shrinkage,fatigue,and erosion resistance were reviewed.It finds that the basic performance indicators of RCA are lower than those of natural aggregate.Therefore,the proportion of RCA in base materials may be limited to 20% ‒ 50%.The shrinkage and erosion resistance …

Research Progress Of Modified Asphalt With Graphene Materials, Zhang Zongwei, He Kai

Journal of China & Foreign Highway

To clarify the research status of mo dified asphalt properties with graphene materials,relevant research literature in China and abroad was consulted to compare the effects of various graphene materials and preparation parameters on asphalt.The results show that graphene,nano graphite sheets,and oxidized graphene can improve the microstructure and road performance of asphalt,increase the service life of asphalt,and reduce the maintenance cost of asphalt.Continuously optimizing the preparation parameters of modified asphalt and exploring the mechanism of modified asphalt with new material not only help the promotion and application of new road asphalt technologies but also reduce energy consumption,pollutants,and carbon emissions,providing new ideas …

Mechanical Performance Of Nuts In Tie Rod Assembly Of Anchorage System Of Suspension Bridge, Liu Zheng, Li Zhao, Qin Guifang, Xie Qinjian, Jiang Yuangen, Zhang Jiyong, Wang Lei, Ma Yafei

Journal of China & Foreign Highway

In order to investigate the stress and fatigue performance of nuts in the tie rod assembly of the anchorage system of a long-span suspension bridge,the finite element software Ansys and Abaqus were used to establish the full bridge model and the local finite element models of the tie rod and the hexagonal nut,respectively.Secondly,the whole process variation law of the synergistic force of the tie rod and the nut under the axial tensile load was revealed.The difference in mechanical performance between slotted nuts and unslotted nuts was compared,and the detailed structural parameters of slotted nuts were optimized.Finally,the static tensile and fatigue …

Installation Direction Design And Construction Control Of Sliding Bearing Of Continuous Girder Bridge, Guan Changlu, Sun Xiudong, Dong Hao, Wang Xingzhou

Journal of China & Foreign Highway

Continuous girder bridges can improve the structural stress,increase the structural bearing capacity,and promote ride comfort.However,some continuous girder bridges suffer from issues such as bearing dislocation,upper torsion,and damage to seismic arrestors.To identify deficiencies in current design and construction control,an in-depth analysis of these issues was conducted.The findings reveal the main reason is that the bidirectional sliding bearings (nearly half of the total ) fail to provide horizontal force,and the main sliding direction of the unidirectional sliding bearings is inconsistent with the deformation of the bridge superstructure.In this paper,factors including temperature-induced deformation,material shrinkage,elastic compression,creep,and construction process control of the bridge superstructure were …

Crack Propagation Of Vehicle‑Steel Bridge Deck Slabs Based On Pavement Damage, Tang Sheng, Yin Xinfeng, Zhang Ming, Yan Wanli

Journal of China & Foreign Highway

In order to study the influence of vehicles under different pavement damage conditions on crack propagation of welded toe at the roof of steel bridge deck slabs,finite element models of suspension bridges,fine vehicles,and local steel bridge deck slabs were established,and multiple groups of obstacle heights were set to simulate pavement damage.The explicit dynamic analysis program was used to simulate vehicle-bridge coupling vibration and extract the forces of vehicles on the steel bridge deck slabs at different lanes,speeds,and obstacle heights.The crack propagation life of the welded toe at the roof was obtained by applying them to a local steel bridge deck …

Calculation Of Socket Depth For Circular Pipe Pier-Bearing Platform Socket Connection, Chen Jingli, Xiao Feng, Wang Zhigang, Wang Zhihai, Xu Yan

Journal of China & Foreign Highway

The minimum socket depth for circular pipe pier-bearing platform socket connection can be calculated according to Article C.0.3 in the Specifications for Design of Highway Precast Concrete Bridges (JTG/T 3365 -05—2022 ).In order to enable engineering designers to fully understand and correctly apply the calculation formula in this article,this paper first introduced the main technical features of the typical connection scheme,as well as the structural failure principles and objectives formulated in the specification of the typical connection scheme.Then,it briefly introduced the experimental research content and results of the typical connection scheme and explained the key construction measures and their functions …

Reliability Analysis Of Long‑Span Concrete Box Arch Bridge Under Temperature Effect Combinations, Zheng Junlin, Jiang Youbao, Zheng Xinhao, Lu Naiwei

Journal of China & Foreign Highway

The existing design methods for concrete arch bridge structures do not consider the random characteristics of the eccentricity generated by load effects and overlook the influence of stochastic eccentricity on structural reliability.To address this deficiency,a calculation model for eccentricity under temperature effect combinations was derived.The random characteristics of eccentricity for different sections of the main arch of concrete arch bridges and their sectional bearing capacities were analyzed under different load parameter combinations.By utilizing the Monte Carlo method,reliability indices were computed for different sections of the main arch and different load parameter combinations after considering the random characteristics of eccentricity.The results …

Preparation And Performance Of Emulsified Asphalt With High-Temperature Resistant And Wheel Sticking-Free Effects, Yan Han, Zha Xudong, Kang Xiaogang, Gong Yan, Zhang Zhengji, Zhang Wenshuai

Journal of China & Foreign Highway

To address the problem of wheel sticking at high temperatures in the construction process of existing wheel sticking-free emulsified asphalt of tack coat,this paper adopted the composite modification method of 70# and 15# matrix asphalt and waterborne polyurethane resin (WPR ) to prepare hard asphalt-WPR (HA-WPR )-modified emulsified asphalt in accordance with the high-temperature resistant and wheel sticking-free requirements.Through a series of laboratory tests,the technical performance,wheel sticking-free performance,and interlayer bonding performance of the emulsified asphalt were researched and compared with ordinary wheel sticking-free emulsified asphalt and ordinary emulsified asphalt tack coat oil.The results show that the technical performance of the …

Model Analysis Of Axial Compressive Mechanical Properties Of Concrete Column Constrained By Textile-Reinforced Engineered Cementitious Composites, Ma Gao, Wang Zhaoyang

Journal of China & Foreign Highway

In order to avoid the problem of matrix cracking in textile-reinforced concrete (TRC ),a reinforcement method of textile-reinforced engineered cementitious composites (ECC ),namely TRECC composed of textile and high-performance ECC was proposed.However,the research on the axial compressive mechanical properties of TRECC-constrained concrete in China and abroad is still insufficient,and there is a lack of reliable strength and ultimate strain analysis models.A total of 116 axial compression test results of TRC-constrained concrete columns and 125 axial compression test results of TRECC-constrained concrete columns were collected.The confinement mechanisms and failure modes of TRECC and TRC-constrained concrete were compared.Then,the strength models and ultimate …

Key Techniques For Constructing Flexible Geosynthetic Reinforced Soil Abutments, Yu Xiaoxiao, Xu Chao, Li Haoyu, Zuo Binli

Journal of China & Foreign Highway

The flexible geosynthetic reinforced soil (GRS ) abutments offer several advantages,including cost saving,reduced bridgehead misalignment,and good seismic performance,showing great potential for application in transportation engineering both in China and abroad.The flexible GRS abutment is essentially composed of a composite structure formed by closely spaced layers of geosynthetic reinforcement material,and the construction quality and load-bearing capacity are crucial to the success of the project.To ensure construction quality and study the construction process of flexible GRS abutments,a construction site monitoring method was adopted.Based on the experience from the construction of a vehicular overpass on the Wuwei ‒ Yuexi Expressway,the quality control measures …

Research On Mechanical Entry Excavation And Reinforcement Measures For Large Cross-Section Tunnel, Liang Xiao, Li Ke, Guo Hongyan, Hu Xuebing, Yao Chengrui

Journal of China & Foreign Highway

With the innovation of tunnel construction techniques and mechanical equipment,mechanical drilling and blasting for mountain tunnels have gradually developed.However,several challenges exist during the mechanical entry excavation for mountain tunnels,including the significant influence of geological factors,limited equipment adaptability,and constrained working space.This research,based on a specific tunnel project,utilized FLAC3D finite difference software to study the mechanical excavation method and auxiliary reinforcement measures for shallow-buried segments at the large cross-section tunnel portal.A comparative analysis was conducted on the displacement of surrounding rock,the stress of supporting structures,and the variation of plastic zones before and after tunnel face reinforcement for different advances per cycle and …

Application Research Of Bim Technology In Highway Prefabricated Bridge Scheme Design, Li Jinlong, Wang Xinnan, Liu Dongsheng, Chen Zhongzhi

Journal of China & Foreign Highway

At present,the highway bridge scheme requires continuous adjustments and upgrading due to iterative updates of design data and refined investigation of the surrounding environment of the bridge site.This paper upgraded the traditional route design software,developed a GIS-integrated platform,built a three-dimensional environment with design data as the core,and created a bridge scheme model through parametric intelligent design.It also evaluated and optimized the bridge scheme based on the integration of the bridge model and the surrounding environment.The results show that by using BIM technology,the forward design of a bridge scheme based on a three-dimensional environment is realized.This approach automates the scale statistics …

Predicting The Indirect Cost Of Construction Projects In Egypt: An Artificial Neural Network Approach, Aya Effat

Theses and Dissertations

Cost estimation is one of the vital processes in construction management that needs to be done early in any project in order to determine the project's budget. The accuracy of the cost estimate is a key factor in the success of construction projects since it enables project managers to successfully control the project’s expenses. Construction costs mainly consist of direct cost and indirect cost. Generally, indirect costs can be categorized into two types: site overheads and general overheads. In a construction project, overheads, particularly site overhead costs, make up a considerable portion of a contractor's budget. Accordingly, accurately estimating the …

Synergizing Gis And Genetic Algorithms To Enhance Road Management And Fund Allocation With A Comprehensive Case Study Approach, Mohamed Nabawy

Civil Engineering

This study identifies a critical knowledge gap, revealing how the deterioration of roads, compounded by extensive usage and additional factors, poses significant risks to the road networks’ functionality. Without a robust fund allocation and prioritization strategy, the extent of this risk may be overlooked, adversely affecting the performance of essential infrastructure elements. Our research introduces an integrated decision-making model for existing road infrastructures to address this gap. This innovative approach combines a Geographic Information System (GIS)-based road management model with a fund allocation prioritization strategy, enhanced by an optimization engine via a genetic algorithm. The primary aim is to precisely …

Synergizing Gis And Genetic Algorithms To Enhance Road Management And Fund Allocation With A Comprehensive Case Study Approach, Mohamed Nabawy

Civil Engineering

This study identifies a critical knowledge gap, revealing how the deterioration of roads, compounded by extensive usage and additional factors, poses significant risks to the road networks’ functionality. Without a robust fund allocation and prioritization strategy, the extent of this risk may be overlooked, adversely affecting the performance of essential infrastructure elements. Our research introduces an integrated decision-making model for existing road infrastructures to address this gap. This innovative approach combines a Geographic Information System (GIS)-based road management model with a fund allocation prioritization strategy, enhanced by an optimization engine via a genetic algorithm. The primary aim is to precisely …

Synergizing Gis And Genetic Algorithms To Enhance Road Management And Fund Allocation With A Comprehensive Case Study Approach, Ahmed Gouda Mohamed

Civil Engineering

This study identifies a critical knowledge gap, revealing how the deterioration of roads, compounded by extensive usage and additional factors, poses significant risks to the road networks’ functionality. Without a robust fund allocation and prioritization strategy, the extent of this risk may be overlooked, adversely affecting the performance of essential infrastructure elements. Our research introduces an integrated decision-making model for existing road infrastructures to address this gap. This innovative approach combines a Geographic Information System (GIS)-based road management model with a fund allocation prioritization strategy, enhanced by an optimization engine via a genetic algorithm. The primary aim is to precisely …

Building Services Engineering January/February 2025

Building Services Engineering

No abstract provided.

Impact Of A Kinesthetic Learning Model On Architecture, Engineering, And Construction (Aec) Knowledge In African American Middle School Girls, Mercy F. Fash, Andrea A.N Ofori-Boadu

Journal of Research Initiatives

This study examines the impact of a femalized Architecture, Engineering, and Construction Kinesthetic Learning Model (fAEC-KLM) intervention on the AEC knowledge of African American middle school girls. Fourteen (14) middle school girls completed both pre- and post-surveys and tests that assessed their knowledge of AEC concepts, including roles and responsibilities, gender and racial diversity, and salary benefits. Paired-sample t-tests were utilized to evaluate statistically significant differences in knowledge before and after fAEC-KLM intervention. Results showed notable improvements in students' knowledge of AEC salary and benefits, as well as the underrepresentation of females, particularly African American females, and AEC roles and …

Construction Change Order Data As Inputs For A Programmatic Risk Model, Eric C. Klein

Theses and Dissertations

Hurricane Michael struck Tyndall Air Force Base as a Category 5 storm with 160 mph winds, damaging or destroying 90% of its infrastructure (484 buildings). This devastation prompted the Department of Defense to rebuild Tyndall as the “Installation of the Future,” encompassing 44 Military Construction (MILCON) projects and 260 Facility Restoration, Sustainment, and Modernization (FRSM) projects. Since reconstruction began, over 630 Change Request Forms (CRFs) have been closed, adding $67.8 million in costs and 4,880 construction days. The Air Force Civil Engineer Center's Natural Disaster Recovery (NDR) Division developed a programmatic risk model to predict future costs and delays. However, …

From Football To Construction: Transferring Leadership Competencies For The Era Of Construction 4.0, Payson W. Campisano

Construction Management

This study aims to explore the intersection of leadership competencies developed through football and their applicability to the construction industry, with a focus placed on the emerging leadership needs in Construction 4.0. Drawing on insights from interviews with current and former student-athletes who study or studied construction management at the California Polytechnic State University in San Luis Obispo, the research highlights the transferability of key leadership qualities from football, such as resilience, teamwork, and critical thinking, to the cognitive, interpersonal, business, and strategic domains of leadership within construction management. Building on the work of Yang, Sunindijo, and Wang (2020), who …

Operation And Maintenance Costs In Reverse Osmosis Desalination Projects Adopting Public-Private Partnerships: A Comprehensive Investigation And Analysis, Mayar Mohamed Khairy

Theses and Dissertations

Water Desalination projects, specifically ones adopting reverse osmosis (RO) technology, play a pivotal role in addressing the scarcity of water globally. Since these projects require huge investments, there is an imperative need to focus on the role of public-private partnerships (PPPs) in their developments. This research tries to provide a comprehensive investigation into the factors affecting O&M costs in PPP desalination projects due to their importance.

A comprehensive research approach, including a literature review, expert interviews, survey analysis, and statistical tools, is adopted in this research aiming to identify key factors and recommendations based on best practices in O&M costs …