Construction Engineering and Management Commons^™

Dynamic Modulus Of Sbs-Modified Asphalt Mixtures Added With Ground Tire Rubber Content, Azharul Islam

College of Graduate Studies: Theses & Dissertations

The study investigates the improvement of the dynamic shear modulus in the base and styrene butadiene styrene (SBS) modified asphalt mixture by accumulating varying amounts of ground tire rubber through an Asphalt mixture performance tester (AMPT). This thesis specifically explores how different percentages of ground tire rubber (GTR) influence the mechanical properties and durability of the asphalt mixture articulated with two grades, PG 64-22 and PG 76-22. The experimental framework consisted of preparing asphalt mixtures blended with 10% to 15% of the binder for PG 64-22 and 3% to 8% of GTR for PG 76-22. The laboratory testing involved using …

Temporal Analysis Of Construction Safety Incidents In Southeastern U.S. Using Machine Learning Techniques, Mayowa O. Oladele

College of Graduate Studies: Theses & Dissertations

Construction safety incidents remain a significant concern, particularly in the Southeastern U.S. due to the high-risk nature of the industry. Analyzing patterns in these incidents can help improve safety practices and reduce accidents. Machine learning (ML) techniques were employed in this study to identify temporal patterns in construction safety incidents, aiming to enhance proactive safety management. The machine learning methods used in this research included logistic regression, decision trees, random forest, support vector machine (SVM), and K nearest neighbors (KNN).

The objective of the study was to analyze temporal trends in safety incidents and identify the most effective machine learningtechnique …

Comparative Analysis Of Lidar And Close-Range Photogrammetry Techniques For Inspection Of Mse Walls In Two Georgia Bridges, Md. Mehrab Hossain

College of Graduate Studies: Theses & Dissertations

Mechanically Stabilized Earth (MSE) retaining walls are durable, settlement tolerant, easy to install, and present cost-effectiveness, in highway bridges. Nevertheless, the cost of repairing MSE walls is high, and it is crucial to have an accurate, quantitative, and scalable inspection method for early detection of potential problems. This study aims to analyze and evaluate undesired displacements that may affect these walls over time. For this, two remote-sensing technologies are considered: Light Detection and Ranging (LiDAR) and 3D Close Range Photogrammetry (CRP). Their performances are compared against an accurate Robotic Total Station (RTS) device, serving as the benchmarking instrument. This work …

Evaluating The Effectiveness Of Lidar And Photogrammetry For Inspecting Mse Walls In Bridges, Shakil Ahmed

College of Graduate Studies: Theses & Dissertations

Mechanically Stabilized Earth (MSE) retaining walls are vital components of transportation infrastructure, providing structural support for embankments and bridge approaches. As many walls approach or exceed their design life, concerns regarding long-term stability, settlement, and displacement have increased. Traditional visual inspection remains the most common assessment method; however, it is subjective and often unable to detect subtle geometric changes that may precede structural distress or failure. This study evaluates Terrestrial LiDAR (Light Detection and Ranging) Scanning (TLS) and Close-Range Photogrammetry (CRP) as nondestructive, noncontact alternatives for detecting displacement in MSE retaining walls. Three representative sites were investigated: a Control Wall …

Effect Of Waste Covid-19 Masks On Compaction Characteristics Of Silty-Clay Soil, Sydney K. Lawson

Honors College Theses

The present study aims to explore the effect of adding shredded waste Covid-19 masks to silty-clay soil on the soil’s compaction characteristics for beneficial use in embankment, the subgrade of roadways, or backfill. This was accomplished by using two different types of masks: blue surgical masks and KN95 masks. Both mask types were hand shredded into half-inch sections using safety-scissors. The maximum dry density (MDD) and optimum moisture content (OMC) are the two most important compaction characteristics, and they were determined by the Standard Proctor Compaction Test (ASTM D698 / AASHTO T99). The change of both the MDD and OMC …

Nondestructive Evaluation Of Structural Defects In Concrete Slabs, Ehsanul Kabir

College of Graduate Studies: Theses & Dissertations

Nondestructive testing (NDT) is a reliable method for determining the structural integrity of new and old construction and understanding the condition of structural defects. It is widely acknowledged that the interpretation of nondestructive evaluation (NDE) has a significant impact on the reliability and consistency of this technology. However, NDT data acquisition remains subjective and heavily dependent on the operator’s knowledge and expertise. As a result, there are still issues to be resolved regarding the imaging and diagnostic procedures for NDT-based concrete inspection. NDT methods such as ground penetrating radar (GPR), and impact-echo (IE), have been extensively used to inspect concrete …

New Longitudinal Error Balancing Approaches For Closed Traverses, Jose L. Manzano

College of Graduate Studies: Theses & Dissertations

This study presents two novel approaches to balance the horizontal longitudinal error of closure, E_C, in closed polygonal traverses. The standard procedure to balance E_C is the Compass Rule. This technique reduces E_C to zero by applying corrections in the lengths of all traverse sides. Those corrections are proportional to the corresponding side lengths. That is, this approach is not an error-correcting approach, but an error-balancing procedure.

The proposed new techniques are based on sensitivity analysis of E_C with respect to small variations, Δ_i, in the lengths of all sides i = 1, …

A Comparison Of Traditional Education And Project-Based Education In Construction Management, Trey Miller

Honors College Theses

Construction is a rapidly moving and constantly changing industry. The skills needed to manage the complex task of running a job site safely, on schedule, and within budget, are unique to the field. Construction Management as an academic field is relatively new discipline. Therefore the field is still rapidly evolving. In many cases, classes are taught by engineering professors, which leads to an engineering-focused education as opposed to a Project Management focused education. Therefore Construction Management students are not receiving the “hands-on” experience early enough in their studies. By structuring classes around an applied project, students will attain a more …

Designing And Testing 3-D Printed Wafer-Box With Embedded Pzt Sensors To Identify The Shape Effect On Energy Harvesting, Ahmad Jami Safayet

College of Graduate Studies: Theses & Dissertations

Piezoelectric energy has been recently paid attention in the field of alternative energy. Day by day the traditional energy sources including Coal tar and oils are becoming scarce. People are heading to an alternative energy source to meet the future energy demand. Piezoelectric energy is one of the competitive energy sources compared to the conventional renewable energy sources including solar, wind, and geothermal power and so on. This energy production method bears enormous research potential because it can be used as the roadway for a new method of power generation. This research project aimed to identify which shaped wafer-box produced …

Building Information Modeling (Bim) Impact On Construction Performance, David D. John

College of Graduate Studies: Theses & Dissertations

This study is designed to address the need for having a measure for Construction Performance on BIM-assisted construction projects. Through this study a new Construction Key Performance Indicator (CKPI) matrix is identified and created by the author. The CKPI could be used to assess BIM-assisted projects. Utilizing a sequential mixed methodology approach, academic and practitioner perspectives are assessed. A qualitative content analysis and quantitative descriptive analysis based on demographics are conducted to establish a better understanding of BIM and Construction Performance. The academic perspective is used to assess the relevance of BIMM and CKPI indicators, and the practitioner perspective is …

Percy H. Perkins, Jr. Architectural Drawings, Zach S. Henderson Library Special Collections

Finding Aids

This collection consists of materials relating to author and gemologist Percy H. Perkins. Materials span 1923 to 1985, and consist of architecture drawings for various significant buildings in southeast Georgia, including a six room schoolhouse in Claxton, GA, Pembroke State Bank, the Stadium & Athletic Field for Morris Brown College, the Women's Dormitory School for Officers’ Training at The Salvation Army Headquarters, Bacon County Elementary School, Claxton High School, and Evans County Training School.

Find this collection in the University Libraries' catalog.

A Case Study Of Student Veteran Efficacy In The College Of Engineering And Information Technology At Georgia Southern University, Kevin G. Finley

College of Graduate Studies: Theses & Dissertations

This thesis addresses the issues student veterans face in their transition from military to academic life while pursuing an undergraduate degree in the STEM fields (Science, Technology, Engineering, Math) at Georgia Southern University’s College of Engineering and Information Technology (CEIT). Historically this transition has been a difficult one. Through the implementation of a mentorship program comprised of military veterans on the staff and faculty of Georgia Southern University as well as assistance and participation from members of the case study researcher team and primary researcher this program assisted incoming military student veterans as they assimilated into the collegiate atmosphere. The …

Audio-Based Productivity Forecasting Of Construction Cyclic Activities, Chris A. Sabillon

College of Graduate Studies: Theses & Dissertations

Due to its high cost, project managers must be able to monitor the performance of construction heavy equipment promptly. This cannot be achieved through traditional management techniques, which are based on direct observation or on estimations from historical data. Some manufacturers have started to integrate their proprietary technologies, but construction contractors are unlikely to have a fleet of entirely new and single manufacturer equipment for this to represent a solution. Third party automated approaches include the use of active sensors such as accelerometers and gyroscopes, passive technologies such as computer vision and image processing, and audio signal processing. Hitherto, most …

Enhancing Project Management With Lean World Class Manufacturing In Construction, Jacob Randles

College of Graduate Studies: Theses & Dissertations

In construction, the goal of commercial projects is to turn a profit. This is achieved by minimizing inputs and maximizing outputs while building a product that meets the customer’s perception of value. Value is determined through pre-negotiated specifications, plans, and material quality. Even in U.S. military construction, the unit executing the construction wants to complete the task on time and on budget, which can be difficult to do. Studies on project completion showcase a surprisingly high rate of failure in reaching the aforementioned “on time, on budget” goal. It is important to understand the nuances and details of U.S. Army …

State Of Accelerated Bridge Construction (Abc) In The United States, Mike Ofili

Honors College Theses

The purpose of this project is to develop a toolkit for the design and construction of bridges using prefabricated materials primarily to reduce the closure time and on-site construction time of newly constructed bridges or bridges undergoing renovation. The research focuses specifically on short span bridges in Georgia (40,60,80, and 120ft spans).

Areas of primary concern for this project were design, constructability, structural analysis, the use of concrete and steel girders, cost efficiency, and industry surveys. In this particular portion of the study, the surveys proved to be most effective when combined with information obtained existing research as well as …

Improving Energy Efficiency And Environmental Sustainability Of Commercial Insulation, Celine F. Manoosingh, James Mihelcic, Manjriker Gunaratne

Civil Engineering & Construction: Faculty Publications

With increasingly stringent energy standards set in place by the Department of Energy, energy efficiency is becoming a paramount concern to manufacturers of appliances. Additionally, the production and disposal of the voluminous amount of polyurethane foam commonly utilized as insulation in refrigeration units poses a significant environmental challenge. In this context, this study investigated an alternative insulation for use in commercial refrigerator/freezer units. A prototype exploring the use of evacuated packets of pyrogenic silica substituting for conventional insulation was assessed. Assessment criteria included experimental comparison of heat transfer characteristics and the energy efficiency of the new insulation as well as …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

College of Graduate Studies: Theses & Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

Library Holdings (2013) Ce Report, Georgia Southern University, Zach S. Henderson

Program Accreditation Reports (2013-2023)

This document is a part of the 2013 Library Holdings Report for the Zach S. Henderson Library at Georgia Southern University. The report includes data for the library resources and services supporting the research of the Allen E. Paulson College of Engineering and Computing, Department of Civil Engineering and Construction.