Construction Engineering and Management Commons^™

Building Resilient And Sustainable Built Environments Through Climate Adaptation, Digital Innovation, And Infrastructure Governance, Mohammed Ali Berawi, Mustika Sari, Perdana Miraj

CSID Journal of Infrastructure Development

The built environment has become one of the most important arenas for responding to climate change, resource pressure, and rapid urban transformation. Cities, infrastructure networks, buildings, and construction projects are no longer expected only to provide physical services. They are also expected to reduce environmental impact, protect communities from disruption, support economic activity, and remain useful under uncertain future conditions. This expectation places resilience and sustainability at the center of infrastructure development.

Resilience refers to the capacity of built systems to anticipate shocks, absorb pressure, recover from damage, and continue functioning. Sustainability asks whether those systems can do so while …

Analysis Of Venture Capital Investment For Financing The Development Of The Palm Oil Industry In Indonesia For Private Companies, Salvatore Yitro, Mustika Sari, Gunawan Saroji

CSID Journal of Infrastructure Development

Indonesia is the world's largest crude palm oil (CPO) producer, accounting for 58.04% of global output from 2018 to 2022 and generating between USD 18.2 billion and USD 28.95 billion in annual foreign exchange earnings from 2016 to 2021. The downstream sector, however, remains largely controlled by foreign markets, and private companies face restricted access to conventional bank financing due to negative campaigns against Indonesian palm oil in European markets. No prior study has examined the financial feasibility of venture capital as a financing mechanism for integrated downstream palm oil development by private companies in Indonesia. This study analysed that …

Analysis Of Factors Influencing The Implementation Of Sustainable Project Management (Spm) In The Construction Industry In Indonesia, Ariq Farhan, Titi Sari Nurul Rachmawati

CSID Journal of Infrastructure Development

The construction industry contributes significantly to economic growth but also carries substantial environmental and social costs. Construction activities generate carbon emissions, consume natural resources, and produce large volumes of waste. Despite growing theoretical development of Sustainable Project Management (SPM) frameworks, empirical evidence on the actual level of SPM implementation in Indonesia's construction sector remains limited. This study aims to identify the factors that influence SPM implementation and measure the level of implementation as perceived by construction professionals. A quantitative survey was administered to 99 professionals across infrastructure, building, and industrial construction sectors in Indonesia. Data were collected through a Likert-scale …

Analysis Of The Implemetation Of Enterprise Resource Planning (Erp) Sap S/4 Hana In Cost Control Of Light Rail Transit (Lrt) Construction Projects, Rizki Zulkarnaini, Bernadette Detty Kussumardianadewi

CSID Journal of Infrastructure Development

Construction projects are expensive, complex, and difficult to keep on budget. Cost overruns are common. The consequences, including delays, disputes, and financial losses, appear repeatedly across the sector. Enterprise Resource Planning (ERP) systems have been widely adopted to address this challenge, but evidence on how SAP S/4HANA performs in Light Rail Transit (LRT) construction is limited. This study analyzed the critical success factors of SAP S/4HANA implementation and evaluated its effect on cost control performance in an LRT project in Jakarta. Data were collected from two sources: a questionnaire distributed to 50 respondents involved in the project, and cost records …

A Smart Contract Framework For Project Financing In Gold Mining Operations: Implications For Improved Financial Forecasting, Silvia Lydia Priskilla, Mohammed Ali Berawi, Mustika Sari Dr.

Smart City

Gold mining projects are characterized by high capital intensity and significant operational variability, making financial forecasting particularly sensitive to the quality and timing of cash-flow data. In practice, conventional financing systems rely on multi-stage administrative processes that create delays between work completion and payment realization, reducing the reliability of financial records used for investment evaluation.

This study aims to develop a smart contract-based financing framework to improve the accuracy of profitability projections in gold mining projects. A case study approach is employed using operational and financial data from a mining project in Sumatra over the period 2023–2026. The analysis combines …

Exploring Determinants Of Value For Money And Bundling Effects On Public–Private Partnership Projects: A Data-Driven Empirical Study, Gaurav Khadka

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Public–private partnerships (P3s) are widely used to deliver public infrastructure, yet current understanding of what drives variation in Value for Money (VfM) and the effectiveness of project delivery strategies such as bundling remains largely conceptual and grounded in perception-based evidence. Consequently, governments lack empirically validated guidance on which project, financial, and macroeconomic conditions meaningfully influence VfM outcomes and whether bundling improves project performance within the P3 context. This study addresses these gaps through an integrated analysis of 180 Canadian P3 infrastructure projects (1992–2020), one of the most comprehensive datasets of realized VfM internationally, incorporating project characteristics, financial arrangements, and macroeconomic …

Risk Identification Of Green Hydrogen Supply Chain In Ammonia Industry In Indonesia Using Delphi And Topsis Methods, Ananda Priatama, Sheila Tobing

Journal of Materials Exploration and Findings

The development of green hydrogen in Indonesia, while promising for supporting industrial decarbonization, remains in its early stages and faces various challenges across technical, economic, and regulatory domains. This study aims to identify and prioritize the risks linked to green hydrogen supply chain in Indonesia, particularly for applications in the ammonia industry. A set of 49 potential risk factors was initially compiled through literature review and prior studies. The Delphi method was employed with a panel of experts to validate these risks, ultimately refining the list to 27 critical risk factors. Subsequently, the Technique for Order Preference by Similarity to …

Nahb Production Home Competition As A Learning Tool Towards Incorporating Business Skills In Construction Management Programs, George Berghorn, Chandler Jones, M.G. Matt Syal

The Professional Constructor

There is a growing realization in the construction industry that the traditional focus of Construction Management (CM) education on technical competencies (such as scheduling, estimating, and construction methods) is insufficient in preparing graduates to meet the strategic and leadership demands of the modern construction profession. A successful construction company requires more than project execution; it demands expertise in business development, financial management, marketing, risk management, and organizational leadership. The disparity between the technical and business aspects of CM education has produced graduates who may succeed in project management yet find it challenging to engage with comprehensive business operations.

This study …

Construction Industry Preparedness For Generation Z And Millennials: Aligning Industry Characteristics With Workforce Job Preferences, Ameenullah Amiri, Dhaval R. Gajjar, Jason D. Lucas

The Professional Constructor

The construction industry in the United States suffers from workforce shortages, partly due to younger generations being hired more slowly than baby boomers retire. Generation Z’s (Gen Z) lack of interest in joining the construction industry, coupled with the retirement of older workers, has amplified the problem. This paper investigates existing literature to identify the work and career preferences of Gen Z and Millennials and determine where the industry may focus efforts to attract these two generations. Through a systematic literature review, this study identified overlaps and gaps between the current construction industry workforce’s perceptions of the industry and the …

Heat-Related Injuries And Fatalities In Roofing: Osha Investigations From 2003-2024, Kenneth S. Sands Ii, Benjamin Marshall

The Professional Constructor

This study examines 52 heat-related roofing incidents recorded by the Occupational Safety and Health Administration (OSHA) between 2003-2024 to describe patterns in outcomes and identify trade-specific prevention opportunities. Researchers built a structured dataset from OSHA investigation summaries and analysed frequencies of the incidents and their associations with month, time of day, project type, end use, and age to complement a thematic review of narrative abstracts. Fifty-eight percent of cases were fatalities, with the remainder split between hospitalized and non-hospitalized injuries; these statistics underscore the consequences of heat events that trigger OSHA reporting. There was a clear relationship between number of …

The Development Of A Convenient And Consistent Methodology For Flight Proficiency To Certify Multi-Rotor Uas Pilots For State Departments Of Transportation, Colin H. Dees, Joseph M. Burgett

The Professional Constructor

To fly an unmanned aircraft system (UAS), commonly referred to as a “drone,” the Federal Aviation Administration (FAA) requires pilots to pass a knowledge test. There is no requirement at the state or federal level for drone operators to demonstrate the ability to operate a UAS. The National Institute of Science and Technology (NIST) has created an exam for public and private entities to assess basic UAS flight proficiency. It is the only nationally recognized flight proficiency protocol. NIST does not provide a scoring recommendation and leaves it to the user to determine the minimum criteria to pass. There is …

The Professional Constructor, Full Issue

The Professional Constructor

Full Issue, Winter 2026

Volume 50, Number 01

Moving From Feasible Solutions To Sustainable Systems In The Built Environment, Mohammed Ali Berawi, Mustika Sari, Perdana Miraj

CSID Journal of Infrastructure Development

The built environment plays a crucial role in global sustainability efforts. Buildings, infrastructure, and cities consume large amounts of energy and materials that shape social behavior, and lock in environmental impacts. Over the past two decades, research has produced a wide range of technical solutions to reduce these impacts. Renewable energy systems, energy-efficient buildings, alternative construction materials, and new construction methods are no longer experimental concepts. Many have proven technical and economic potential. Yet, real-world transformation remains slow and uneven. This gap suggests that sustainability challenges in the built environment are no longer driven by a lack of technology. Instead, …

Barriers To The Adoption Of Modular Construction Technology In South Africa, Mokete Matoba, Christopher Amoah

CSID Journal of Infrastructure Development

Construction, mining, and manufacturing are the most significant contributors to South Africa's GDP. While manufacturing and other industries utilise advanced technologies to enhance productivity, he construction industry continues to lag behind in technological adoption. This study examines the barriers that hinder the South African construction industry from leveraging the benefits of modular construction technologies (MCT). The study employed a quantitative research method, using closed-ended questions to collect data. The questionnaires were emailed to South African construction industry professionals selected through a combination of purposive and convenience sampling. A total of 98 questionnaires were distributed, of which 46 were returned. However, …

Effects Of Calcination Conditions Of Locust Bean Pod On The Mechanical Properties Of Locust Bean Pod Ash High-Strength Concrete, Iorwuese Anum, Umar Abdullahi, Megat Azmi Megat Johari, Felix Nkapheeyan Isa

CSID Journal of Infrastructure Development

Locust Bean Pod Ash (LBPA) is produced from the calcination of Locust Bean Pod (LBP), an agricultural waste of the African locust bean tree (Parkia biglobosa). This study evaluated the use of LBPA obtained through controlled calcination and open burning as a supplementary cementitious material (SCM) in high-strength concrete (HSC). Cement was replaced by LBPA at 5%, 10%, 15%, and 20% by weight using both ashes—LC for ash produced through calcination at 600 °C, and LO for ash obtained through open burning. Slump and strength were assessed, including compressive strength (100 × 100 × 100 mm cubes) and splitting tensile …

Enhancing Health And Safety Practices In Construction Site In Developing Nations Through Technology Advancement In South Western Nigeria, Mubaraq Lawal, Abba Mahmud, Ismail Gbolahan Dere, Thankgod Agbo Owoicho

CSID Journal of Infrastructure Development

The construction sector plays a critical role in urban development and economic growth, yet it continues to face major challenges that threaten worker health and safety. Traditional safety measures are not always sufficient for the complex conditions found on construction sites, which creates a need for technology‑based solutions. This study investigates the relationship between technology adoption and health and safety practices in the construction industry in Lagos, Nigeria. The study identifies the major causes of site accidents, examines the level of technology use on construction sites, and reviews existing literature through both primary and secondary data. Primary data were collected …

Exploring The Horizontal Static And Dynamic Shading Devices To Minimize Cooling Load In Tropical Buildings, Hilmi Fitriatulamal, Ova Candra Dewi, Miktha Farid Alkadri, Kartika Rahmasari

CSID Journal of Infrastructure Development

Shading devices are essential for reducing solar radiation and cooling loads in buildings located in tropical climates. In the Jakarta region, the highest solar factor is observed on west- and east-facing facades, followed by north- and south-facing orientations. National building policy in Indonesia encourages facades to face north–south to reduce solar heat gain. This study explores horizontal static and dynamic shading devices on north-facing facades and evaluates their impact on cooling load reduction and daylight performance. The methodology includes calculating and simulating energy use intensity (EUI) using EnergyPlus and conducting illuminance analysis using Radiance and Grasshopper. Key parameters considered in …

Smart Building Rating System: A Comparative Analysis Of National And International Rating Systems, Amanah Hamidah, Mohammed Ali Berawi, Mustika Sari, Gunawan Saroji

CSID Journal of Infrastructure Development

Smart buildings have become a key part of the Fourth Industrial Revolution, driven by the need for efficient, sustainable, and adaptive built environments. Their importance is growing alongside Indonesia’s effort to develop smart cities. This study compares Indonesia’s national smart building certification system, established under Ministerial Regulation No. 10 of 2023, with two international systems: the European Union’s Smart Readiness Indicator (SRI) and the SmartScore certification. The analysis uses a literature review and comparative method to examine each system’s assessment criteria, scoring method, and certification tier. The findings show that Indonesia’s regulation includes six parameters, such as cybersecurity and operational …

From The Editors, Rully Karim Dr.

Journal of Project Management & Construction

The Journal of Project Management and Construction (JPMC) is a peer-reviewed publication dedicated to advancing the field of project management and construction, grounded in the principles outlined in the PMBOK 6th Edition. Our focus encompasses the ten knowledge areas essential to successful project management: Integration, Scope, Schedule, Cost, Quality, Resource, Communications, Risk, Procurement, and Stakeholder Management.

JPMC publishes original research papers written in English that provide deeper insights into these knowledge areas and contribute to the development of best practices in project management and construction. Submissions may include theoretical analyses, computational models, experimental observations, or a combination of both theoretical …

Critical Success Factors Of Lean Construction Implementation To Improve Construction Project Efficiency In Indonesia, Onal Putra, Rossy Armyn Machfudiyanto

Journal of Project Management & Construction

Inefficiency is still a problem in the construction industry in Indonesia and in the world. Inefficiency leads to delayed deadlines, budget overruns, and inappropriate quality. It is caused by a lot of waste in the form of activities that use resources but do not produce the expected value. Lean construction is one approach to address this problem by eliminating waste and maximizing value for users or customers. This research aims to identify and determine the critical success factors that most influence the implementation of lean construction to improve the efficiency of construction projects in Indonesia as well as the development …

Development Of Knowledge Base Of Audit Process In High-Rise Building Works With Design-Build Contract Based On Iso 19011:2018 And Regulation Of The Minister Of Public Works And Housing No. 10 Of 2021, Zafira Alysha Fadli, Danang Budi Nugroho

Journal of Project Management & Construction

In achieving the long-term development goal of Advanced Indonesia, the Government continues to accelerate the completion of infrastructure development, such as strategic and priority projects that support economic transformation. Infrastructure development is still one of the main focuses of the Indonesian government, the 2024 state revenue and expenditure budget (APBN) is allocated to the infrastructure budget. The massive construction of high-rise buildings in Indonesia, the number of accidents is getting higher, so it is necessary to implement an audit process on construction work. The audit process is to know and monitor directly the procedures that have been applied optimally. Therefore, …

Development Of Work Breakdown Structure (Wbs) Dictionary And Checklist Integrated With Building Information Modelling (Bim) On Concrete Bridge’S Care And Maintenance Work To Improve Maintenance Performance, Dina Benua Lalitya, Yusuf Latief

Journal of Project Management & Construction

According to The Ministry of Public Works and Public Housing of Republic of Indonesia (Kementerian PUPR), there was a significant decrease in national bridge condition in year 2021 compared to year 2018. One of the crucial factors that led to the collapse of the bridge was the lack of bridge management and maintenance to ensure the bridge’s serviceability. To cope with this condition, the solution needed is to carry out effective, efficient, and economical care and maintenance works. In bridge’s care and maintenance works, good project management can be improved with Work Breakdown Structure (WBS) and the use of integrated …

Circular Thinking In A Technological Age: Designing For A Regenerative Future, Mohammed Ali Berawi, Perdana Miraj, Mustika Sari

CSID Journal of Infrastructure Development

Architecture, engineering, and construction sector is experiencing challenges related to environment and economic aspects. It consumes vast amounts of resources and energy and contributes heavily to global carbon emissions. Academics and industry leaders are trying to explore various strategies to combat climate change by shifting toward circularity. It is a systems-based approach that prioritizes regenerative design, responsible consumption, and closed-loop resource use. At the heart of this shift lies the interplay between circularity, technology, and the environment that can reshape how we live, produce, and consume. But this transformation is not simply about adopting greener practices; it’s about rethinking the …

The City As The Classroom: The Case Of “Start ‘Em Young Advocacy” At Silliman University, Philippines, Novee Elarmo Maestrecampo Jr., Giovanni Tuballa Macahig

CSID Journal of Infrastructure Development

This case study highlights the value of engaging with communities as real-world environments for practical and reflective learning. It suggests that students can develop insights and acquire knowledge through interactions with diverse groups and locations, even within urban settings. The paper presents the experience of implementing the “Start ‘em Young Advocacy,” a student-led, environment-focused, and project-based initiative within the Civic Welfare Training Service (CWTS) under the National Service Training Program (NSTP) at Silliman University, Philippines. In collaboration with the City Social Welfare and Development Office (CSWDO), CWTS students worked with thirty daycare centers. Using Kolb’s Experiential Learning Theory as a …

Barriers To Learning Exposure In Construction 4.0: Perspectives From Built-Environment Students, Olajide Julius Faremi, Habeeb Abiodun Arowolo

CSID Journal of Infrastructure Development

The ongoing digital transformation of the construction industry, known as Construction 4.0, requires students in built-environment programs to gain adequate exposure to emerging technologies. Despite this need, many faces significant barriers to meaningful engagement. This study explores the factors limiting students’ learning experiences related to Construction 4.0 in Nigerian universities and polytechnics. Using a stratified random sampling method, 154 students from one university and one polytechnic were surveyed through a structured questionnaire. Data were analyzed using frequency distribution, relative importance index, and the Mann-Whitney test. Results identify key obstacles such as limited peer collaboration, insufficient funding and resources, and weak …

Assessing The Impact Of Nigerian Seaports’ Operational Performance On The Construction Sector’S Contribution To Gdp, Ismail Gbolahan Dere, Joel Ademola Ojekunle

CSID Journal of Infrastructure Development

The construction sector in Nigeria relies heavily on imported materials; however, inefficiencies and frequent delays at the seaports have led to increased costs, significantly affecting the sector’s contribution to the nation’s Gross Domestic Product (GDP). This study examines the relationship between the operational performance of Nigerian seaports and the GDP contribution of the construction sector. Secondary data on GDP and port performance indicators were obtained from the Central Bank of Nigeria (CBN) and the Nigerian Ports Authority (NPA), covering the period from 2011 to 2023. The analysis employed descriptive and inferential statistics methods, including regression and Stochastic Frontier Analysis (SFA). …

Acceptability Of The Proposed Congestion Charging System In The Central Business District Of Baguio City, Philippines, Ericka Renee A. Lanigt, Sandra S. Samantela, Ma. Catriona E. Devanadera, Casper Boongaling Agaton

CSID Journal of Infrastructure Development

The City Government of Baguio is proposing a congestion charging system in the Central Business District (CBD) to address the ongoing issue of traffic congestion in the city. Although it is an effective tool, low public acceptability hinders its implementation. This study aims to assess Baguio City residents' acceptability regarding the CBD's congestion charging system. Specifically, it seeks to (1) identify the factors that influence residents’ acceptability of the proposed system, (2) evaluate whether there is a significant difference in acceptability across different road users (private vehicles, public transportation, cycling, and walking), and (3) provide recommendations for transportation policy planning …

The Third Annual Hasslein Caed Collaborative, Marianne Nicole Bishai

Construction Management

This paper details the planning, development, and impact of the third annual Hasslein CAED Collaborative Student Competition. The intention of the Hasslein Cup is to engage the students of the five College of Architecture and Environmental Design (CAED) majors in an industry-like scenario. The five majors, Architecture, Architectural Engineering, City and Regional Planning, Construction Management, and Landscape Architecture, make up the workforce of the construction industry, yet there has been very little opportunity for the students to work together and replicate a professional scenario. The competition began from research conducted by Greta Stout, class of 2022, which explored the benefits …

Satisfaction And Retention Analysis Of A 4/10 Workweek In Construction, Daniel C. Choy

Construction Management

The traditional 40-hour workweek, structured as five 8-hour days (5/8), has been a long-standing standard in the American workforce since Henry Ford implemented it in 1922. However, in recent years, many industries, including construction, have begun reevaluating this model to determine whether alternative schedules could offer better efficiency and employee satisfaction. One of the most discussed alternatives is the four-day, 10-hour workweek (4/10). This research examines the potential advantages and challenges of adopting the 4/10 schedule, particularly for specialty contractors, through an employee survey conducted at Western Specialty Contractors in Seattle, Washington. The study explores how this schedule affects worker …

Developing Core Competencies For The Air Force Civil Engineer Asset Management Career Field, David A. Rochester

Theses and Dissertations

The United States Air Force (USAF) relies on a highly trained and capable workforce to maintain and manage its infrastructure, ensuring mission readiness and operational effectiveness. However, the increasing complexity of asset management, aging infrastructure, and evolving global threats necessitate a structured approach to developing the competencies required for Air Force Civil Engineer Asset Managers. This research aims to identify, develop, and validate core competencies specific to this career field, utilizing a structured methodology that combines an Education Working Group (EWG) with a Delphi study. The study begins with an expert-led EWG to generate an initial list of competencies based …