Construction Engineering and Management Commons^™

Evaluating Training Effectiveness And Learning Transfer In The Kentucky Transportation Cabinet Safety Academy, Amanda L. Casolare

Theses and Dissertations--Civil Engineering

Effective evaluation of safety training is crucial to ensure that learning translates into safe work practices, particularly in high-risk public sector environments. The Kentucky Transportation Cabinet (KYTC) is developing a Safety Academy to enhance hazard recognition, risk management, and safety leadership within the organization. However, the Safety Academy has not yet been implemented, and formal evaluation methods for training have not been established. This study aimed to examine evidence-based training evaluation techniques and develop recommendations for evaluating the KYTC Safety Academy prior to program implementation.

This study employed an applied pre-implementation research design grounded in a comprehensive review of safety …

A Framework For Ai Implementation In Construction: Use Cases, Challenges, And Benefits For Contractors, Jaqueline De Aquino Leite Gomes

Theses and Dissertations--Civil Engineering

The construction industry is one of the most important sectors that contribute to the economy worldwide, but it has been very slow in adopting digital transformation. Artificial Intelligence is the backbone of digital innovation, and it can help solve inefficiencies, improve safety, and enhance decision-making in construction. This thesis reviews 85 academic papers, identifies 354 AI use-cases, 180 benefits, and 173 challenges. Key findings have looked at the role of AI in safety monitoring, design optimization, and operational efficiency, while barriers involve data scarcity, high costs, and readiness of the workforce.

All of these challenges have one very handy framework …

Understanding The Construction Workforce Needs Of The Future: Technology, Skills, Diversity, Bassam Ramadan

Theses and Dissertations--Civil Engineering

The U.S. construction industry stands at a crossroads. The looming age cliff is about to present its most serious challenges yet, coinciding with a shortage of qualified skilled professionals. As the demands of the construction industry continue to grow, it continues to lack the manpower to meet those demands. In order to meet the rising demands of construction needs in the near future, the construction industry needs to focus on improving workforce performance and productivity, and increasing the size of the construction labor force. Existing research highlights the importance of technological adoption and workforce skills, and that gender and ethnic …

Impact Of Augmented Documentation Workflows On Transportation Agency Asphalt Paving Operations: A Qualitative And Quantitative Study, Josh Withrow

Theses and Dissertations--Civil Engineering

e-Ticketing was an intriguing technology to many state transportation agencies (STAs) pre-COVID-19 pandemic but gained significant attention upon arrival of the pandemic due to the contactless nature of the technology. Research completed prior to the pandemic into e-ticketing for asphalt paving primarily identified qualitative benefits and concerns. However, minimal academic literature exists in the post-pandemic era discussing the additional e-ticketing benefits not previously captured which resulted in increased implementation by STAs. This research seeks to address this gap by gathering information from state members of the American Association of State Highway and Transportation Officials Committee on Construction (AASHTO COC), employees …

Analysis And Improvement Of The Kentucky Transportation Cabinet’S Serious Injury And Fatality Program, Arun Subedi

Theses and Dissertations--Civil Engineering

Serious Injuries and Fatalities (SIFs) within construction and maintenance industries indicate severe vulnerabilities within workplace safety, and their prevention requires the highest priority. SIFs usually occur due to systemic failures, and proactive steps must be taken to identify and neutralize high-risk scenarios. Kentucky Transportation Cabinet (KYTC) has recently implemented a safety management system called BOOTS, for improving incident reporting and analysis along with SIFs. This study identifies gaps in KYTC's SIF reporting framework and provides analysis on recurring incident trends utilizing the incidents already reported in the system. While current practice in KYTC relies on event-based decision tree when classifying …

Digital Innovation Roadmap For Construction Industry: Bridging The Gap For Future, Nisa Zahin

Theses and Dissertations--Civil Engineering

Digitalization has considerable value in the digital transformation of the construction business. It means the use of digital technologies to create revenue, improve business, increase profit and sustainability, and create an environment for digital business whereby digital information is at the core. As such, digital transformation requires skills that involve extracting and exchanging data and analyzing and converting that data into actionable information. In addition to technological solutions, a paramount need is to ensure that the people using these solutions and the processes used to integrate, coordinate between teams, and continuously improve the use of technology are in place. Therefore, …

Value Propositions, Adoption Factors, And Implementation Considerations: Building A Path Towards Construction Innovation, Makram Bou Bou Hatoum

Theses and Dissertations--Civil Engineering

The construction industry has been influenced by a wave of technological advancements and trends that were introduced by the fourth industrial revolution or Industry 4.0. Mapped as Construction 4.0, these technologies are disrupting the way projects are designed, planned, constructed, delivered, and operated. While existing research has predominantly focused on technology adoption and use cases across the project lifecycle, limited attention has been given to the organizational perspective and explored Construction 4.0 as a transformative vision. As such, there is a significant need for decision science research to support decision-makers in understanding the value of Construction 4.0, gaining leadership buy-in, …

Digital Twins For Ancillary Transportation Asset Data Management, Ashtarout Ammar

Theses and Dissertations--Civil Engineering

Transportation Asset Management (TAM) is a data-driven decision-making process to maintain and extend the serviceability of transportation assets throughout their lifecycle. TAM is an extensive data process requiring accurate, high-quality information for better decision-making. A significant challenge that state Departments of Transportation (DOTs) face is allocating limited funds to optimize their assets’ performance. The criticality of this challenge increases when state DOTs need to manage a wide variety of assets distributed along with a vast network; thus, they prioritize the management of high-value assets and visible ones such as bridges, and they pay less attention to ancillary assets even though …

Rollout Of A Digital Comprehensive Safety Management System In A Large Public Agency: A Case Study With Kentucky Transportation Cabinet, Salena Pham

Theses and Dissertations--Civil Engineering

It’s understood that construction is extremely dangerous and highway construction has an added risk that comes from the presence of traffic. Many steps and prevention measures can be taken to reduce the risks to workers’ safety in highway work zones. Kentucky Transportation Cabinet (KYTC) realized they had room for improvement and wanted to have a database that would allow for analysis of the common causes of incidents. The new software KYTC wanted to implement is called Origami Risk. Origami Risk is a cloud-based safety management system (SMS) software that offers a huge range of customizable risk management, RMIS, environmental health …

Identifying And Evaluating The Perceptions Of Near-Miss Reporting Within The Kentucky Transportation Cabinet, Seth Atkins

Theses and Dissertations--Civil Engineering

In the field of construction, most safety data and practices focus on preventing and mitigating serious incidents resulting in injuries or fatalities. However, on construction sites, near-miss events occur more frequently than said serious incidents and, under marginally different conditions, could potentially lead to damages, injuries, or fatalities. Therefore, near-miss reporting can serve as a useful tool for managing safety as it allows for workers to identify and managers to address potential risk factors within construction sites. While most construction companies have implemented some method for reporting near-miss events, many organizations, such as the Kentucky Transportation Cabinet (KYTC), struggle with …

Adapting Through Organizational Change In Capital Projects Organizations, Mahmoud El Jazzar

Theses and Dissertations--Civil Engineering

Organizational change can be defined as an alteration of a core aspect of an organization’s operation, structure, or culture. Previous research on organizational change mainly has focused on different types of technical changes, such as alternative project delivery methods and strategies to adopt the design-build approach successfully. Also, previous studies have focused on the project level changes instead of organizational level responses. Here I show using a proposed change model and performing thematic, and analysis, that there exist common responses, and challenges across different types of capital projects organizations studied. The results show that responses to change will differ as …

Understanding The Differences Between Industry Objectives And Institutional Learning, Kristen Schell

Theses and Dissertations--Civil Engineering

To combat understaffing in the construction industry, it is necessary to employ the best candidates possible. By identifying the most desirable skills in a construction employee from an industry perspective, institutional learning can better prepare graduates for the construction workforce. Currently there exists an information gap in the objectives of the construction industry and institutional learning. This gap produces graduates, professors, and employers with expectations that do not align. Reducing this gap will aid in the success of hiring recently graduated construction students who can meet the ever-changing demands of the industry. Construction students who are fresh out of college …

Propositions For A Resilient, Post-Covid-19 Future For The Aec Industry, Hala Nassereddine, Kyung Wook Seo, Zofia K. Rybkowski, Christian Schranz, Harald Urban

Civil Engineering Faculty Publications

The coronavirus outbreak has challenged and continues to challenge every aspect of the supply chain within the AEC industry, forcing stakeholders to cope with increasing uncertainties and continuous change. The notion of resilience is especially salient now. While the need for the AEC industry to focus on resilience has been highlighted in recent articles, there is a need for a comprehensive discussion on what resilience means for the AEC industry and how companies can create built-in resilience. This paper takes the form of a high-level overview of where the industry is headed and aims to establish eleven propositions for a …

Risk-Based Construction Inspection, Shannon Rush

Theses and Dissertations--Civil Engineering

State Transportation Agencies have been experiencing staffing difficulties in the last couple of decades due to the deterioration of infrastructure and a large number of employees retiring or transitioning to the private sector. Therefore, the STA demographic has become much younger and a loss of critical knowledge has resulted from this changeover. Construction Inspection in particular has been severely impacted. Inspired by the NCHRP Synthesis 450, the Kentucky Transportation Cabinet has initiated the Risk-Based Construction Inspection project which focuses on prioritizing construction activities based on the risk associated with failure of that work item. The purpose of which is to …

Lessons Learned From Six Different Structural Health Monitoring Systems On Highway Bridges, Abheetha Peiris, Charlie Sun, Issam E. Harik

Kentucky Transportation Center Faculty and Researcher Publications

Structural health monitoring has been utilized in numerous ways to investigate the performance and integrity of highway bridges. This paper highlights the use of six structural health monitoring systems, which were deployed to monitor distinct behaviors on six bridges in Kentucky. The structural health monitoring systems are as follows: (1) Over-height truck impact detection and monitoring on the I-64 over US 60 bridge, (2) Barge impact detection and monitoring on northbound US 41 over the Ohio River, (3) effectiveness of carbon fiber-reinforced polymer retrofit evaluation based on prestressed concrete I-girder crack movement on the I-65 elevated expressway in Louisville, (4) …

Design And Analysis Of A Pavement Marker Detection System, Timothy L. Johnson Ii

Theses and Dissertations--Civil Engineering

Personal injuries and property damage due to the failure of snow-plowable pavement markers which detach from pavement surfaces has led to the development of new all-plastic pavement markers which are located entirely below the planar surface of the pavement. The new all-plastic design pushes existing solutions used to avoid striping over highway reflectors into obsolescence since current solutions operate using electromagnets to sense the metal housings of snow-plowable pavement markers. A replacement solution is currently sought by the highway maintenance industry and three different marker detection methods were developed and tested on real-world highways with both new and aging pavement …

E-Construction Technologies For Efficient Highway Construction Inspections, Dhaivat Patel

Theses and Dissertations--Civil Engineering

Over recent years, organizations such as the Federal Highway Administration and Departments of Transportation across the United States have showed interest in automating highway construction processes. The addition of e-Construction and other advanced technologies can significantly improve the efficiency and safety of highway paving operations, specifically paving inspections. Activities such as collecting load tickets, tracking pavement lay-down temperatures, and monitoring roller movement are antiquated practices that DOT inspectors perform during paving operations. E-Ticketing, Paver Mounted Thermal Profiling, and Intelligent Compaction were proposed to automate paving inspections and were recently tested in two resurfacing pilot projects in the state of Kentucky. …

Redefining Construction “As-Built” Plans To Meet Current Kentucky Transportation Cabinet Needs, Victoria Lynn Lasley

Theses and Dissertations--Civil Engineering

As-built drawings are the traditional method used by the construction industry to record changes made during construction. As-builts provide valuable information for new design projects as well as rehabilitation and remediation projects. The completeness and accuracy of these plans are essential for transportation industries and their success. While the importance of as-builts is widely recognized, the process of creating them has proven to be difficult. It is a time consuming process and entities often lack the resources necessary to complete accurate and detailed as-builts. After an investigation of current as-built operations within State Transportation Agencies, recommendations have been made to …

Improving Safety Performance Of Highway Maintenance Crews Through Pre-Task Safety Toolbox Talks, Zamaan Al-Shabbani

Theses and Dissertations--Civil Engineering

The dangerous work environment in the construction industry and the inherent high risks associated with construction work make it the focus of safety training and regulations. Highway construction and maintenance has unique hazards but seemingly less directly applicable safety standards, regulations, and programs. Department of Transportation (DOT) employees working in highway maintenance are exposed to a variety of unique hazards specifically associated with their work and not relating to the adjacent traffic. Yet, highway construction and maintenance work has not received sufficient attention in terms of safety research and programs. The lack of safety training and education in highway construction …

Hazard Recognition And Risk Perception Among Union Electricians, Elyas Jazayeri

Theses and Dissertations--Civil Engineering

Hazard recognition and risk perception are two important factors that are a focus of most safety training programs. According to previous research, unrecognized hazards could lead to underestimation of risks, which ultimately could lead to injuries and fatalities. The primary objective of this research was to assess hazard recognition and safety risk perception skills in the electrician trade among electricians in unions. Another goal of this study was to find possible correlation between level of engagement in safety training and hazard recognition and risk perception skills. The research objectives were accomplished by gathering data from sixty-seven apprentices and journeymen across …

What You Don’T See, Brent Sturlaugson

Architecture Faculty Publications

Follow the supply chains of architecture and you’ll find not just product manufacturers but also environmental polluters and elusive networks of financial power and political influence.

Risk Management And Practice Alignment For Utility Coordination On Transportation Projects, Roy E. Sturgill Jr.

Theses and Dissertations--Civil Engineering

Utility coordination is an exceedingly complex effort of managing, communicating, and facilitating the avoidance and relocation of utility facilities as needed for highway projects. Utility coordination occurs throughout the design and delivery of a project and best practices are used to make sure this occurs efficiently and in the best interest of the public, who are not only the taxpayers but also the ratepayers. Recent research has attempted to enhance utility location technology and procedures, instill frameworks and tools for utility coordination, and proceduralize risk management relative to utility coordination. However, research attempting to improve various aspects of utility coordination …

Assessing The Application Of The Unmanned Aerial Systems (Uas) In Earthwork Volume Measurement, Xi Wang

Theses and Dissertations--Civil Engineering

Earthwork operations are often one of the major cost items on infrastructure construction projects. Because earthwork is largely influenced by unstable construction conditions and organization plans, it becomes the emphasis and difficulties of the cost control in the construction process. Therefore, precise estimates of actual earthwork volumes are important for both owners and contractors alike to ensure appropriate payments are made. However, measuring work on site requires lots of time and labors because of various and irregular site conditions. Conventional measurement methods, such as planned quantities from the drawings or estimates from equipment activity, are rough estimates with significant opportunities …

Advanced Technologies For Efficient Transportation Construction Inspection, Clyde Wesley Newcomer Iv

Theses and Dissertations--Civil Engineering

Collecting load tickets is an example of an antiquated practice that puts inspectors in harm’s way either adjacent to traffic, in close proximity to moving or backing equipment, or at times requires climbing onto trucks to reach tickets. Technology exists to collect this information electronically allowing for safer, efficient inspection methods. Departments of Transportation are charged with inspecting an increasing work load with a diminishing number of inspection staff. Recently, doing more with less has led to the prioritization of inspection activities and resulted in less collection of data and visual inspection on projects. Technology advancements are available to improve …

Subcontracting And The Survival Of Plants In The Road Construction Industry: A Panel Quantile Regression Analysis, Dakshina G. De Silva, Georgia Kosmopoulou, Carlos Lamarche

Economics Faculty Publications

This paper investigates how subcontracting parts of contracted work shapes entrants’ success and survival. We find that newly developed quantile regression approaches can be adapted to study survival of firms competing for government contracts in road construction. The method is applied on a data set that includes patterns of firm entry, exit and auction related information. We find an apparent increase in the business life of firms who subcontract out part of their projects. In Texas, these subcontracting effects appear to be more pronounced for firms with few or no options outside the industry, and among firms who contract out …

The Impact Of Owner Practices And Procedures On Construction Project Safety Performance, Huang Liu

Theses and Dissertations--Civil Engineering

Construction sites are dangerous work environments. One traditional assumption prevails in the construction industry that construction safety should be the sole responsibility of the contractor. However, some safety researchers gradually begin to challenge this assumption. The elementary research in this field try to validate the existence of relationship of the owner’s practices and safety performance, which indicates that the involvements of the owner have a positive impact on improvement of safety performance. Therefore, the owner can and should take a responsibility of the project safety. Some subsequent research focus on collecting and summarizing the best safety practices and procedures of …

Pavement Condition Index And Cost Of Ownership Analysis On Preventative Maintenance Projects In Kentucky, Dominic J. Michels

Theses and Dissertations--Civil Engineering

The Commonwealth of Kentucky has seen increasing use over time of preventative maintenance treatments on its asphalt pavements. Performance of two of the most prevalent treatments employed by the Kentucky Transportation Cabinet (KYTC) – Thin Asphalt Overlay (Thinlay) and Microsurfacing – had yet to be examined in-depth through condition surveys. This thesis describes the data collection process to find the Pavement Condition Index (PCI) of each preventative maintenance site in Kentucky from the last 10 years. With PCI from each site, deterioration curves were generated for each treatment – providing the estimated life extension benefit of each. The analysis then …

Quantitative Analysis Of The Impact Of Craft Labor Availability On Construction Project Performance, Hossein Karimi

Theses and Dissertations--Civil Engineering

A shortage of skilled craft labor in the North American construction industry has been an unfortunate cyclic trend since the late 1980s. This shortage has been reported and discussed frequently by numerous past studies in the context of construction industry. The 2008 U.S. recession was at least one period when the craft shortage temporarily improved, as witnessed by spikes in construction unemployment rates above 20% due to the work slowdowns. However, the current economic recovery period is once again experiencing craft shortages in some sectors of the U.S. construction industry. Although the past literature provides wealth of information about influence …

Bridge End Settlement Evaluation And Prediction, Jiwen Zhang

Theses and Dissertations--Civil Engineering

A bridge approach is usually built to provide a smooth and safe transition for vehicles from the roadway pavement to the bridge structure. However, differential settlement between the roadway pavement resting on embankment fill and the bridge abutment built on more rigid foundation often creates a bump in the roadway. Previous work examined this issue at a microscopic level and presented new methods for eliminating or minimizing the effects at specific locations.

This research studies the problem at a macroscopic level by determining methods to predict settlement severity to assist designers in developing remediation plans during project development to minimize …

Object Detection For Agricultural And Construction Environments Using An Ultrasonic Sensor, Joseph S. Dvorak, Marvin L. Stone, Kelvin P. Self

Biosystems and Agricultural Engineering Faculty Publications

This study tested an ultrasonic sensor‘s ability to detect several objects commonly encountered in outdoor agricultural or construction environments: a water jug, a sheet of oriented strand board (OSB), a metal fence post, a human model, a wooden fence post, a Dracaena plant, a juniper plant, and a dog model. Tests were performed with each target object at distances from 0.01 to 3 m. Five tests were performed with each object at each location, and the sensor‘s ability to detect the object during each test was categorized as "undetected," "intermittent," "incorrect distance," "good." Rigid objects that presented a larger surface …