Construction Engineering and Management Commons^™

Early-Age Hydration Studies Of Portland Cement, Fengjuan Liu

Electronic Theses and Dissertations

Our current knowledge on cement hydration during setting is based on the discrete observation of hydrated paste. An advanced micro/nano-level technique which can perform the in-situ observation on the continuous hydration of cement paste is demanded. In this study, Raman spectroscopy (RS) was chosen as such a method to continuously investigate wet pastes. The objective of this research is to explore the hydration process and microstructural development of fresh pastes with this technique. This research was conducted in three phases. First, the RS analysis was used to continuously observe the cement hydration from 20 minutes after mixing to 9 hours. …

A Strategic Approach To Effectively Manage Supplier Quality Within The Construction Industry, Rufaidah Almaian

Graduate Theses and Dissertations

The aim of the research is to determine the best practices for supplier quality management (SQM) in the construction industry that ensure that the supplied materials and equipment for construction projects are within the quality requirements. The research is based on three main objectives. The first objective is to describe and assess the process of assuring supplier quality inside and outside the construction industry. The second objective is to develop a framework for the supplier quality process based on the collection of SQM practices from multiple data sources. The third objective is to assess the SQM practices within the developed …

Bs News November/December

Building Services Engineering

No abstract provided.

Interdisciplinary, Collaborative International Service Learning: Developing Engineering Students As Global Citizens, Anthony D. Songer, Karen R. Breitkreuz

Construction Management Faculty Publications and Presentations

Recent calls to reform engineering education place emphasis on applied math and science within the broader context of globalization, economics, the environment, and society. This broad and complex challenge necessitates the investigation of new interdisciplinary education approaches for engineering education. This paper presents a formal approach for developing engineering students as global citizens. The 360 Degree Model for Educating Socially Responsible Global Citizens (360 Global Ed model) presented herein includes a framework for foundational theory, educational environment, academic coursework, and outcomes. At the core of the emerging model is an international service learning experience called the Village Network. …

Construction Management Service Learning: A "How To" Process For Success, R. Casey Cline, Ken Robson, Michael Kroth

Construction Management Faculty Publications and Presentations

To ensure that students are prepared for positions in the construction industry, construction management education programs expose students to industry relevant construction management (CM) theory and practice. Traditional transmission teaching methodologies, while arguably effective for teaching management theory and practice, are not as effective for the transfer of practical leadership skills and knowledge of construction specific processes. As an alternative teaching strategy, many CM programs incorporate service-learning (S-L) into curricula; providing students practical experience, focusing on the acquisition of knowledge through goal setting, thinking, planning, experimentation, observation, and reflection.

However, from a practical standpoint, the development of a service-learning project …

Bs News September/October

Building Services Engineering

No abstract provided.

A Cost Benefit Analysis Of Improving Energy Efficiency Of A Fitness Facilty, Inuri A. Illeperuma

Journal of Environmental and Resource Economics at Colby

Abstract: Nearly 40% of the total U.S. energy consumption in 2012 was consumed in residential and commercial buildings, as recorded by U.S. Energy Information Administration. With the urgent need to reduce overall energy consumption in the U.S., many efforts are made to improve the energy efficiency of buildings. However, energy managers identify budget constraints as one of the main obstacles in improving the energy efficiency of buildings. Hence this study focuses on a cost benefit analysis of improving the energy efficiency, with a special focus on fitness facilities in college environments. As a case study, the author focuses on improving …

Evaluating The Impact Of Bridge Deck Removal Method On The Performance Of Precast/Prestressed Concrete I-Girders, Shaddi Assad

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Wide flange precast/prestressed concrete I-girders have been widely used by several State Departments of Transportation (DOTs) in the last two decades. These girders have many advantages over standard AASHTO I-girders. Their wide and thick bottom flange accommodates a large number of prestressing strands and their wide and thin top flange provides a shorter deck span, reduced girder weight, greater stability in construction, and adequate platform for workers. Despite these advantages, the wide and thin top flange might be disadvantageous when it comes to deck removal, as it is more susceptible to damage. Therefore there is a need to investigate the …

Development Of Improved Electrodeposition Method For Repair Of Reinforced Concrete Structures, Takahiro Nishida, Nobuaki Otsuki, Atsushi Saito

International Conference on Durability of Concrete Structures

Deterioration of reinforced concrete members and their repair methods have been reported in various concrete published reports. Electrodeposition method is one of these repair methods for repairing deteriorated concrete members using an electrochemical mechanism. The purposes of the electrodeposition method are to fill cracks in concrete and to coat the concrete surface by electrodeposits of chemical compounds. This can be accomplished by passing a weak direct current (1.0–3.0 A/m² of concrete surface area) between a reinforcing steel bar (cathode) in concrete and an external electrode (anode) located in an external solution near the concrete surface. This method also accomplishes …

Effects Of Stirrups On Bond Behavior Between Concrete And Corroded Steel Bars, Hongwei Lin, Yuxi Zhao, Ming Sun

International Conference on Durability of Concrete Structures

Steel corrosion leads to the deterioration of bond between concrete and steel bars. The serviceability and ultimate strength of concrete elements within RC structures are hence affected. Many researchers have studied the bond behavior of corroded steel bars. However, very few studies have investigated the effects of confinements on the degradation of bond strength. The present paper proposed a new kind of beam specimen based on which the effects of stirrups on degradation of bond were investigated. The test results proved that stirrups can effectively increase the bond strength between concrete and corroded steel bars.

Effect Of Blast Furnace Slag Powder And Fly Ash On Durability Of Concrete Mixed With Seawater, Nobuaki Otsuki, Takahiro Nishida, Chang Yi, Tomohiro Nagata, Hiroki Ohara

International Conference on Durability of Concrete Structures

According to the report of the United Nations, it is said that two-third of world population would be influenced by water shortage before 2050. To use fresh water effectively, the usage of seawater in concrete industry seems imperative. However, the usage of seawater as concrete material is prohibited in almost all the standards or specifications around the world. In this article, the usage of seawater as a material of concrete based on the results of experimental works and deterioration prediction was discussed. Especially, the effects of by-products such as blast furnace slag or fly ash on the durability of concrete …

Coastal Defenses, U.S., Bert Chapman

Libraries Faculty and Staff Scholarship and Research

Provides an overview of U.S. military coastal defenses during the period up to and including the War 1812.

An Investigation Of Project Delivery Methods Relating To Repetitive Commercial Construction, Donald A. Patterson

Theses and Dissertations

The Design/Bid/Build (DBB) delivery method has historically been the most popular and the most effective means of determining the least cost for building a project based upon a set of construction documents. In recent years, however, other project delivery methods, including but limited to Construction Manager/General Contractor (CM/GC) and Design/Build (DB), have slowly taken a share of the construction market away from the DBB delivery method. The choice of delivery method that will produce the best value for an owner in the measurements of efficiency in quality, cost, and timeliness depends upon the type of project and the business culture …

Creating Total Value Engineering Through Combining Design For Manufacturing And Design For Six Sigma Constructs, David Ryan Christensen

Theses and Dissertations

The modern manufacturing world has been driven to compete in a more international and interconnected system. This has led to increased focus upon frameworks and architectures to guarantee quality, high market acceptance, and reduce cost. Modern manufacturing design processes evolved largely from Henry Ford at Ford Motor Company, and Alfred Sloan at General Motors. Their structures embody two different focuses on quality and value engineering which have influenced many recent design frameworks. In the 1970s a heavy emphasis was placed upon Design for Manufacturing, which uses group technology, commonality of processes, and continual focus to reduce part count. Some companies …

Cypress Construction Inc.: Scheduling And Estimating Quandaries For Small Scale Residential Builds, Thamar Alsayyar

Master of Technology Management Plan II Graduate Projects

This study evaluates the particular scheduling and estimating challenges faced by Cypress Construction Incorporated, a small, privately owned residential construction company based in Baltimore, Maryland. The study, via the usage of primary data collection in the form of personal interviews and site observations, determines the nature of the scheduling and estimating functions conducted by Cypress Construction Inc.’s owner This data is then analyzed to ascertain why the scheduling and estimating functions of Cypress Construction Inc. are unique to the firm and are in need of amelioration. Furthermore, the study includes a literature review to compare the experiences of Cypress Construction …

Seismic Response Of A Tall Building To Recorded And Simulated Ground Motions, Nenad Bijelic, Ting Lin, Gregory Deierlein

Civil and Environmental Engineering Faculty Research and Publications

Seismological modeling technologies are advancing to the stage of enabling fundamental simulation of earthquake fault ruptures, which offer new opportunities to simulate extreme ground motions for collapse safety assessment and earthquake scenarios for community resilience studies. With the goal toward establishing the reliability of simulated ground motions for performance-based engineering, this paper examines the response of a 20-story concrete moment frame building analyzed by nonlinear dynamic analysis under corresponding sets of recorded and simulated ground motions. The simulated ground motions were obtained through a larger validation study via the Southern California Earthquake Center (SCEC) Broadband Platform (BBP) that simulates magnitude …

Bs News July/August

Building Services Engineering

No abstract provided.

Analysis Of Data Center Network Convergence Technologies, Robert-Lee Daniel Leblanc

Theses and Dissertations

The networks in traditional data centers have remained unchanged for decades and have grown large, complex and costly. Many data centers have a general purpose Ethernet network and one or more additional specialized networks for storage or high performance low latency applications. Network convergence promises to lower the cost and complexity of the data center network by virtualizing the different networks onto a single wire. There is little evidence, aside from vendors' claims, that validate network convergence actually achieves these goals. This work defines a framework for creating a series of unbiased tests to validate converged technologies and compare them …

The Effect Of Learning And Cost Optimization On Line Of Balance Scheduling, Kareem Essam Zahran

Theses and Dissertations

The increase in populations throughout the past years introduced the need for improving and increasing countries’ infrastructure. Moreover, there has been an increasing demand for dwelling units ranging from small economic housing blocks to high-rise buildings and residential villa compounds. These projects are known by their repetitive nature, where a constant unit is repeated several times. Scheduling techniques that consider the learning effect as an influencing parameter in calculating productivity rates can improve the effectiveness of the scheduling process. This achieves more realistic forecasts resulting in optimum utilization of resources and better control during implementation phases. Linear scheduling techniques are …

Aligning Bim And Lean Methodologies Within Capital Works Management Framework In Ireland, Barry Mcauley, Alan Hore, Muiris O'Loingsigh, John Deeney

Conference papers

In 2007, following continued dissatisfaction with the lack of cost certainty on publicly funded projects, the Irish Government introduced the Capital Works Management Framework (CWMF). This framework had stated strategic objectives of achieving greater cost certainty at contract award stage; better value for money at all stages during project delivery and, more efficient end-user delivery. The framework, in particular, sought to rebalance risk, so that there was an optimal transfer of risk to the contracting authority and the contractor through the implementation of fixed price contracts. Coinciding with the introduction of the CWMF, there was significant debate around the introduction …

Friction Bit Joining Of Dissimilar Combinations Of Advanced High-Strength Steel And Aluminum Alloys, Lile P. Squires

Theses and Dissertations

Friction bit joining (FBJ) is a new method that enables lightweight metal to be joined to advanced high-strength steels. Weight reduction through the use of advanced high-strength materials is necessary in the automotive industry, as well as other markets, where weight savings are increasingly emphasized in pursuit of fuel efficiency. The purpose of this research is twofold: (1) to understand the influence that process parameters such as bit design, material type and machine commands have on the consistency and strength of friction bit joints in dissimilar metal alloys; and (2) to pioneer machine and bit configurations that would aid commercial, …

Assessment And Cost Effective Analysis Of Leed Certified Single-Family Homes In Kentucky, Stephen Glossner

Morehead State Theses and Dissertations

A Thesis Presented to the faculty of the College of Science and Technology Morehead State University in Partial Fulfillment of the requirements for the Degree Masters of Science by Stephen Glossner on June 9, 2014.

Current Bim Practices Of Commercial Mep Contractors, Bryan John Kent

Theses and Dissertations

Building Information Modeling (BIM) use in the contracting industry has grown significantly in recent years. With this change in the construction industry, consensus has not been reached as to what BIM is, who is using it and what they are using it for. The purpose of this research was to determine current BIM practices of US-based commercial MEP contractors. Executive, middle management, and field personnel were interviewed to determine the current BIM practices in their companies. The majority of companies interviewed were using BIM and most were using it on a significant portion of their projects. The majority of MEP …

Multi-Criteria Decision Modeling For Best Value Selections In Target Value Design Integrated Project Delivery, Brent Patrick Griffis

Master's Theses

Integrated Project Delivery (IPD) combined with Target Value Design (TVD) is a better way to deliver value for the client than traditional guaranteed maximum price (GMP) methods. With traditional GMP delivery methods, the interests of the parties are often at odds. The goal of IPD is to align all party interests in order to achieve a win-win scenario. Due to the aligning nature of IPD and the fact that each party’s success is dependent on achieving the project objectives as a whole; a non-biased, transparent, decision-making process is necessary in order to deliver the project objectives within the constraints of …

The Effect Of Clay, Cement And Fibers On The Strength And Durability Of Compressed Earth Blocks, Wyatt Adair Banker-Hix

Master's Theses

This Thesis examines the effect of soil characteristics, cement content and fibers on the strength and durability of compressed earth blocks (CEBs). This work expands on the available information regarding the constituent properties which affect the compressive and tensile strengths and durability of CEBs. Additionally, little research on the subject of synthetic fibers and their effect on strength and durability of CEBs is available and this work provides an initial study in this area.

To study the effects of fibers, as well as confirm the trends of previous research regarding the effects of clay and cement, 27 unique batches of …

An Integral Framework For Sustainable Building Design, Bushra Asfari

Masters Theses

Selection of materials for building design is a delicate process hinged of a number of factors which can be cost or environmental related, depending on the objectives of the design. This process becomes more difficult when designers are faced with several material options for each building component. This thesis presents the design and development of a framework that enables designers understand the trade-off between cost and environmental related factors when selecting materials for building design. The framework is based on the integration of Autodesk Revit, Microsoft access, and modeling modified Harmony search multi-objective optimization tool adapted to account for material …

Real-Time Hybrid Simulation With Online Model Updating, Adam Mueller

Masters Theses

Hybrid simulations have shown great potential for economic and reliable assessment of structural seismic performance through a combination of physically tested components, called the experimental substructure, and numerically simulated components, called the numerical substructure. Current hybrid simulation practices often use a fixed numerical model without considering the possible availability of a more accurate model obtained during hybrid simulation through an online model updating technique. To address this limitation and improve the reliability of numerical models in hybrid simulations, this study describes the implementation of an online model updating method in real-time hybrid simulation (RTHS). The Unscented Kalman Filter (UKF) was …

Energy Mgmt Asset Value.Pdf, Khalid Siddiqi

Faculty Articles

The objective of this study was to establish a relationship between facility energy management and asset valuation in federal facilities. Current operating pool of federal government facilities of varying size and location were considered in this study to determine this relationship. The overall value of a building asset was considered and evaluated in the context of the building’s energy performance over time. One major conclusion was that facilities which had better energy management have higher “tier” ratings than those buildings which had little to no energy management. The findings of this study would be useful for facility/building managers and asset …

Ua66 Ogden College Of Science & Engineering Newsletter, Cheryl Stevens, Dean

Ogden College of Science & Engineering Publications

No abstract provided.

Bs News May/June

Building Services Engineering

No abstract provided.