International Construction In El Salvador, Daniel Roberts

Construction Management

My senior project focused on participating in international construction operations in El Salvador through hands-on involvement in the construction of a steel warehouse facility and a small residential home. The project emphasized structural concrete placement, field coordination, construction sequencing, and adaptation to regional construction practices. Work included assisting with concrete foundations, slab preparation, reinforcing steel placement, masonry work, and general site coordination activities. The experience provided practical exposure to labor productivity, material availability, scheduling challenges, and construction methods commonly used in developing regions. The project also highlighted the importance of communication, problem-solving, and flexibility when working in an international construction …

Ada Concrete Walkway Improvements At The Gala Pride And Diversity Center, Jonathan A. Mintz, Manuel Gonzalez

Construction Management

This paper presents the planning, design, and construction of an accessible concrete walkway completed for the GALA Pride and Diversity Center in San Luis Obispo, California. The project addressed an accessibility gap between the center's front entrance and rear parking lot through a combination of site preparation, concrete work, retaining wall construction, and supporting improvements. Construction was managed around the active events schedule while staying within the constraints of a nonprofit budget. Challenges encountered during the project included scope changes, material selection decisions, and client coordination. The completed walkway provides a safe and stable path for all visitors and directly …

Sustainability In Concrete: Decision-Makers, Dismissal Points, And A Framework For Implementation, Max Dennison

Construction Management

Concrete is essential to modern infrastructure, but is also one of the largest sources of embodied carbon, with cement production alone responsible for a significant share of global CO₂ emissions. Although low-carbon and otherwise “sustainable” concrete technologies are growing, their use in everyday projects remains limited. This research investigates why sustainable concrete options are most often dismissed during the project lifecycle, who drives these decisions, and what conditions are needed to enable broader adoption. Using a combination of literature review and semi-structured interviews with professionals in contracting, life-cycle assessment, sustainability consulting, and materials production, the study maps decision points from …

Towards Decarbonizing Concrete Industry In Egypt: Material Alternatives, And Economic Viability, Reem Gamal

Theses and Dissertations

The construction industry remains one of the largest contributors to global greenhouse gas emissions, with cement and steel production accounting for approximately 15% of total emissions. As global infrastructure demands continue to rise, there is an increasing need for practical tools that support low-carbon construction practices in line with international climate commitments. This research presents the development and testing of a mathematical, adaptable decision support system designed to assess both the environmental and financial impacts of material selection in concrete production. Focusing on life cycle stages A1 to A3, raw material extraction, transportation, and manufacturing, the decision support system enables …

Effect Of Granite Machine-Made Sand Properties On Concrete Performance, Wang Jiliang, Wei Xinyuan, Yu Bo

Journal of China & Foreign Highway

As an important stone resource in China,granite is widely used in the preparation of machine-made sand and other building materials due to its stable physical properties and favorable mechanical performance.In order to promote the better application of granite in machine-made sand for cement concrete,this paper analyzed the mineral composition,particle grading,and mica content of granite machine-made sand.It systematically summarized the influence of these characteristics on the mechanical properties,durability,and volumetric stability of concrete.The results show that the concrete performance declines with increasing mica and stone powder content in granite machine-made sand.Properly limiting their content can improve the mechanical properties and durability of …

Son Care Foundation – Pergola Structure Construction, Jackson Landless

Construction Management

This paper covers the construction process of a pergola structure for the Son Care Foundation in San Luis Obispo, California. The project’s goal in this study is to create a welcoming outdoor space for clients their dogs. Excavating four footings, fabricating custom rebar cages, and pouring concrete using fast-setting mix were all part of the construction efforts. Framing the structure required precise calculations to accommodate for the slope and corner braces. The matching white paint and corrugated PVC roof further achieved the desired aesthetic the client requested. Trial and error, practical experience, and cooperation with local material suppliers and maintenance …

Concrete Patio Demolition And Construction, Tyler Nielsen

Construction Management

A 6.25 cubic yard unreinforced concrete patio was constructed for the non-profit organization. This project included three phases: concrete slab demolition, grading and formwork, and concrete pouring. Each phase was estimated and then received owner approval prior to execution. The demolition phase involved obtaining city permits for a roll-off container for debris removal. This phase also included two days of work with over 10 demolition crew members, who were given the required training and equipment to ensure safety and productivity. The following weeks included grading and setting up formwork. Once the grade was complete, the formwork was laid out and …

Optimizing Concrete Strength: How Nanomaterials And Ai Redefine Mix Design, Dan Huang, Guangshuai Han, Ziyang Tang

Physics and Engineering Science

Nanomaterials and supplementary cementitious materials (SCMs) are typically used together in efforts to enhance the performance of concrete and mitigate the environmental impact of concrete construction. However, the complex interactions between nanomaterials, SCMs, and cement make concrete mix design a challenging, iterative, and labor-intensive process, often relying on trial-and-error experimentation. Machine learning (ML) offers an opportunity to better understand the influence of input parameters and to accelerate the optimization of mix designs through data-driven insights. This study proposes an open-source and easy-to-access framework, Canopy, to support the concrete research community in optimizing mix design. Using a dataset collected from the …

Molecular Scale Investigations Of Interactions Between Pfas And Concrete, Eric E. Keeler

Theses and Dissertations

Per- and polyfluoroalkyl substances (PFAS), widely referred to as “forever chemicals,” exhibit high environmental persistence and potential health risks due to their robust carbon-fluorine bonds. These substances are prevalent in aqueous film-forming foams (AFFF), used in industrial and military applications, and are known to contaminate environmental surfaces, including concrete. This study aims to characterize the molecular-level interaction energies of six PFAS species—PFOA, PFOS, PFHxS, PFHxA, 6:2 FTS, and PFBS—with calcium silicate, a key component of concrete, using density functional theory (DFT) calculations. Change in Gibbs free energy (ΔG) was determined for each of the interactions, revealing negative ΔG values for …

Caed Shop Entrance Wall Redesign, Theodore Haoran Khuong, Joelle Schalesky, Ellen Elizabeth Untalan, Katherine Evalyn Timbes

Construction Management

This paper details the preconstruction process involving the replacement and redesign of the north wall at the CAED Support Shop at Cal Poly, San Luis Obispo. Accomplished by an interdisciplinary team of Architectural Engineering and Construction Management students, this project explores the requirements and procedures of generating a project proposal to submit to Cal Poly Facilities Management. The project, initiated in the fall of 2024, aimed to redesign the wall aligned with the adjacent Engineering West building and replace it with a CMU low lift grouted wall. The CAED Support Shop is offered as a resource to all CAED students …

Research Review Of Biomass Ash As Concrete Admixture, Ma Bicong, Liang Jian, Weng Yiling

Journal of China & Foreign Highway

In order to provide a comprehensive overview of research progress in the use of biomass ash as concrete admixture，the physical and chemical properties，mechanism of action，factors affecting the production process of biomass ash，and the effects of biomass ash incorporation on the working properties，mechanical properties，and durability of concrete were studied.The results show that biomass ash has a smaller density and a larger specific surface area than traditional mineral admixture，and the total amount of active components，namely SiO2 + Al2O3 + Fe2O3 （SAF） in most biomass ashes exceeds the requirements of class F volcanic ash （≥70%）.Incorporating biomass ash can effectively improve the mechanical properties …

Concrete Design: Underwater Concrete Forms In A Saltwater Environment, Noah Z. Lau

Construction Management

This following project investigated the effects of salt on the concrete curing process. Concrete possesses numerous strengths, making it extremely versatile. This makes it one of the most utilized construction materials. New improved methods are constantly being developed for concrete’s application as a construction material. While concrete is a flexible material with many strengths, it is not without its flaws. Concrete, while strong in compression is weak in tension. It has long cure times and doesn’t generally handle moisture well. This paper evaluates concrete’s change in strength from letting concrete cure in a salt-based underwater environment. To determine the full …

Effects Of Titanium Particulates On Concrete Compressive Strength, Ryan Christopher Brunello

Construction Management

Titanium has the potential to increase the compressive strength of concrete. This experiment investigates the impact of titanium admixture on concrete compressive strength, using three different forms of titanium: shavings, flakes, and powder. This experiment goes further, evaluating the effects of varying proportions of titanium admixture, ranging from 1% - 5% by the weight of cement, resulting in 15 different concrete test cylinders and one additional cylinder as the control variable with no titanium admixture. This experiment aims to identify the optimal recipe for concrete mix with titanium admixture which can provide valuable insight to the industry as to how …

Research On Performance Of Coal Gangue Concrete, Wang Jiliang, Ma Wenhui, Xu Weidong, Lyu Zhigang

Journal of China & Foreign Highway

Coal gangue is an industrial solid waste produced in the process of raw coal mining.It has a large stock and a relatively low utilization rate.Using coal gangue as concrete aggregate can not only solve the environmental pollution caused by coal gangue storage but also make up for the shortage of natural sand and gravel resources，which opens up an effective way for the large-scale utilization of coal gangue.According to the application characteristics of coal gangue as concrete aggregate，the chemical component，mineral composition，and physical properties of coal gangue were systematically analyzed.The influence of coal gangue as aggregate on the working performance，mechanical properties，volume stability，and …

Dynamic Responses Of Super‑Wide Self‑Anchored Suspension Bridge Under Blast Loading, Zhou Guangpan, Lin Zhicheng, Fan Jin, Wang Mingyang

Journal of China & Foreign Highway

To study the dynamic response and damage characteristics of the super-wide concrete self-anchored suspension bridge under the blast loading,a real bridge with these characteristics was selected as the background,and the numerical simulation was used to analyze the dynamic response of the top surface crack shape and the vertical displacement of the bottom plate of the super-wide box girder under the close blast of the bridge deck.Firstly,the refined finite element model of the whole bridge was established by using SolidWorks and HyperMesh.Secondly,the blast loading was applied by Ansys/LS-DYNA and *LOAD_BLAST_ENHANCED (LBE ) method,and the reliability of the calculation method was verified …

Investigating The Performance Of Bendable Concrete Against Traditional Concrete, Landon J. Poston

Construction Management

The qualitative research in this case study evaluates the importance of bendable concrete within various construction settings. The data aims to justify the interest in bendable concrete, as well as why it is not being used more in structural work. The intended stakeholders of this paper are concrete suppliers, contractors, and researchers who are looking for more imperative ways to manufacture a more sustainable form of concrete. Through a brief online meeting and a Google Form questionnaire, company participants were able to provide the knowledge and feedback desired for how bendable concrete can be incorporated more in the future of …

Building 21 Courtyard Barbecue Pit Demolition, Will Riviere

Construction Management

This project intended to demonstrate the process of a full-scope demolition project at a manageable scale. Almost sixteen yards of concrete were to be demolished, including all reinforcing structures within the barbecue. The purpose of this project was to clear space for the impending renovation of Building 21’s courtyard and remove the unsafe barbecue from the busy pedestrian pathway. Sledgehammers were used in conjunction with electric jackhammers to perform the demolition. Rebar from demolition was separated from the concrete and recycled separately from any cementitious materials. Careful attention was given to protecting existing brick beneath the structure, the surrounding area, …

Iron Filings Impact On The Compressive Strength Of Concrete, Dominic Daniel Aceves

Construction Management

In this study, compression tests were performed on three different mix designs of concrete to evaluate the effects of iron filings as an admixture to concrete. The first mix design served as the control mix, being the variable that the other two mixes will be based off. The second mix design was the same as the first mix design, but with an added 12 ounces of iron filings. The third mix design was, again, the same as the first mix design, but with an added 24 ounces of iron filings doubling that of the second mix design. The objective of …

Son Care Foundation – Lean To Shade Structure Design And Construction, Ryan Joseph Mccann

Construction Management

This paper discusses the design and construction of a lean-to-shade structure built for the Son Care Foundation in San Luis Obispo. The Son Care Foundation is a nonprofit organization that raises guide dogs for veterans and first responders with PTSD. This shade structure is 16 feet long and 6 feet wide, its height slopes from 9 feet in the front down to 8 feet in the back creating a roof pitch of 2:12. The sheet metal roof also has an overhang of approximately 1 foot. As requested by the client, the shade structure was designed to fit the aesthetic of …

Effect Of Pismo Clams As Partial Fine And Coarse Aggregate Replacement On Workability And Compressive Strength Of Concrete, Alan Munoz Pille

Construction Management

Concrete has been utilized for ages. Unfortunately, over the hundreds of years there has been little development in the applications of new aggregate materials. The world is moving towards a sustainable way of living and as a result seashells have come into the mix. Pismo Clams are a native species to San Luis Obispo County. This marine species has the possibility of becoming a partial aggregate replacement for fine and coarse aggregates in concrete. The results of prior studies indicate a possible application of seashell use in concrete. This paper evaluates the workability and compressive strength of concrete containing fine …

Quality Assurance And Quality Control For Reinforced Concrete Inspections, Calvin O. Walters Jr.

Publications and Research

Ensuring the safety and longevity of structures is paramount in concrete construction projects. Cases like the Big Dig ceiling collapse, which occurred on July 10, 2006, when a concrete ceiling panel measuring 20' x 40' and debris weighing 26 short tons (52,000 lb) fell within Boston's Fort Point Channel Tunnel, underscore this importance (Wald, M. L., 2007). Quality Assurance (QA) and Quality Control (QC) are crucial in mitigating such risks. QA ensures that materials and methods meet predetermined performance, design, and reliability standards specified in contracts and customer arrangements. On the other hand, QC is a strategic process businesses use …

Reducing Carbon Emissions With Returned Concrete, John M. Maxwell Jr.

Construction Management

The concrete industry is one of the most energy-intensive sectors of construction. Specifically, the cement production aspect is the most energy intensive, and produces the most carbon emissions. Concrete, a material ubiquitous with nearly every facet of construction; certain types of structures are composed of nearly all concrete. Production of cement is one of the biggest contributors to emissions within the industry. There have been initiatives to reduce or offset emissions from this process, through things like carbon capture, and the purchase of carbon or emissions credits. The objective of this paper was to investigate a new method of carbon …

Predicting Compressive Strength Of Concrete Incorporating Fly Ash, Blast Furnace Slag, And Superplasticizer Using Machine Learning Techniques, Muhammad Faisal Yaqub

2024 REYES Proceedings

Concrete is the second most essential element in the construction industry, and its strength requirements vary based on the specific conditions of each project. However, determining the compressive strength of concrete involves laboratory tests, which wastes a lot of time and money. Researchers have developed machine learning models that predict the compressive strength of cement-based concrete having various mixes. In this research, the compressive strength of concrete incorporating fly ash, blast furnace slag, and superplasticizer is predicted using different machine learning models, namely, Linear Regression, Random Forest Regression, Decision Tree Regression, Extreme Gradient Boosting, Light Gradient Boosting, AdaBoost, and CatBoost …

Cal Poly Craft Center Wedging Tables, Cooper Christopher Strong

Construction Management

The Craft Center, located on Cal Poly's campus, is where students can unwind from stressful coursework and engage in activities like pottery, surfboard shaping, and stained glass. The pottery studio needed new wedging tables, which are essential for removing air from clay before shaping it. The project involved building two new 7’ x 2.5’ tables that would fit well in the space and be durable. Designed to be 33” tall, these tables are accessible to students of varying heights. They feature a concrete surface that is both durable and porous, helping to absorb some moisture during use. The previous tables …

Compressive And Flexural Tensile Strength Impacts Of Aluminum Shavings In Concrete, Ian Smith

Construction Management

Concrete is one of the most utilized construction materials around the world, but new and cutting-edge methods are constantly pushing the envelope for concrete’s applications and feasibility as a construction material. Unfortunately, concrete has a general lack of resistance to bending and stretching. Studies have shown several successful attempts to enhance the mechanical properties of concrete through implementation of various admixtures and methods. Steel is widely considered the primary material capable of reinforcing concrete. This paper evaluates concrete’s change in strength of flexural tension and compression as a result of implementing aluminum as a reinforcing agent. To determine the full …

Evaluation Of Novel Jointless Engineered Cementitious Composites Ultrathin Whitetopping (Ecc-Utw), Ricardo Hungria

LSU Doctoral Dissertations

Ultrathin Whitetopping (UTW) is a rehabilitation technique that consists of placing a thin layer of concrete over a damaged asphalt pavement. While UTWs have demonstrated satisfactory performance in field tests, the inherent brittleness of concrete has led to the appearance of distresses. To address these distresses, Engineered Cementitious Composites (ECC) have been proposed for UTW applications, thanks to their exceptional attributes, including tensile ductility, flexural performance, and fatigue resistance. In this study, an ECC-UTW was constructed to investigate its potential as a viable solution. The project comprised two 18.3 m ECC sections with different thicknesses, namely 63.5 mm and 101.6 …

Study On Effect Of Nanomodified Additives On Properties Of Concrete Mixtures During Winter Season, Li Yulin, Liang Hongjie, Liang Junlin, Rong Hongliu, Yang Xiaolong

Journal of China & Foreign Highway

To solve the difficult placement of small structures on highways caused by the decreasing workability of cement concrete construction in winter seasons, this paper developed a nanomodified additive to investigate its effect on the performance of cement concrete. Sulfonate naphthaleneformaldehyde (SNF), nanoSiO2, rosin soap (WSR) and sodium nitrate (NaNO3) were formulated into a variety of additives in different ratios and mixing contents to prepare cement concrete, with the fluidity, segregation and compressive strength studied. The results show that the optimal ratio (mass) of nanomodified additives is SNF:0.4%, nanoSiO2:0.1%, WSR:0.05%, and NaNO3:4.0%. The fluidity, segregation and compressive strength of the concrete …

Experimental Study On Mechanical Properties Of Steel-Polypropylene Mixed Fiber Rubber Concrete, Qiu Jiandong

Journal of China & Foreign Highway

Waste rubber materials can be recycled to obtain rubber aggregates, which can be employed in cement concrete products. This paper carried out mechanical performance tests on ordinary concrete and rubber concrete (rubber substitution rate of 20%) with different fiber combinations (doped MS, co-doped PP, and mixed MS-PP), and mainly examined the slump, density, compressive strength, modulus of elasticity, split tensile strength, and rupture strength of the concrete. The results show that the relevant performance indexes decrease significantly after 20% of rubber aggregate is added to the concrete. However, the mechanical performance of ordinary concrete and rubber concrete with the combination …

Influence Of Steel Fiber And Polymer Emulsion On Mechanical Properties And Microstructure Of Concrete, Guo Guanglei, Sun Shiqiang, Li Ying, Zheng Yiwei, Mei Yingjun

Journal of China & Foreign Highway

The microstructure and mechanical properties of concrete were improved by adding steel fiber and polymer emulsion. The working properties and mechanical properties of steel fiber concrete, polymer emulsion-modified concrete, and steel fiber polymer concrete were tested at 3 d, 28 d, and 90 d. Nitrogen adsorption test, mercury injection test, and density method were used to obtain the total pore volume, median pore size, and closed porosity of concrete. The influence of steel fiber and polymer emulsion on the microstructure and mechanical properties of concrete was analyzed. The results show that the compressive strength of concrete after adding steel fiber …

Slab Extension At Woods Humane Society, Corey K. Smith

Construction Management

Woods Humane Society is an animal shelter that provides pet rehabilitation and adoption services to San Luis Obispo and surrounding areas. The Woods’ facility contains a number of kennels for dogs as well as numerous outdoor, fenced-in, concrete exercise yards. These yards give dogs the opportunity to play outside a few times a day allowing them to get vital exercise. One of these yards on the south side of the property had an exterior fence that was offset from an existing slab on the interior of the fence by one foot. This was an issue for the shelter as dogs …