Construction Engineering and Management Commons^™

Analysis Of Construction Fall Protection Guardrails In A Population With Changing Anthropometrics, Connor S. Klinzing

Masters Theses

The construction trade has commonly been cited as one of the most dangerous industries within the United States, with falls from elevation being the most predominate cause for injuries and deaths. The OSHA standards related guardrails has not changed since its implementation in 1970. These standards originally derive from the 1950s, which expect a 160-pound person with 40 pounds of equipment, tools, etc. However, the anthropometries of the common working age citizen has dramatically changed in respects to their weight. This study examines the relationship of the guardrail system to the changing anthropometries to determine if a reform is necessary …

Implementing Online Updating To Complex Hysteresis Models In Real- Time Hybrid Simulation Using Constrained Unscented Kalman Filter, Bilal Ahmed Mohammed

Masters Theses

Although conventional experimental methods, such as quasi-static testing, shake table testing, etc., perform well to evaluate structural seismic performance necessary for modern seismic design, the quasi-static loading and/or reduced scale specimen used in shake table testing may not provide true dynamic responses of structural systems. To overcome these limitations, real-time hybrid simulation (RTHS) was developed, which is a combination of physical testing of the experimental substructure and analytical simulation of the numerical substructure. With the advancement of hybrid simulation, it is now possible to economically test large to full-scale specimens in laboratories at the real earthquake rate. Online model updating …

Safety Benefit Analysis Of Alternative Delineation Practices In Michigan, Brenda C. Burdick

Masters Theses

Among the many aspects of roadway design, one important system is roadway delineation. The main purposes of roadway delineation include regulating, warning, and guiding drivers in a safe manner. Delineation systems have the potential to reduce crashes. This research sought to perform safety benefit analysis of roadway delineation practices in Michigan. Through literature review, several delineation practices, selection criteria, and previously developed crash modification factors were researched. Even though several pavement marking materials have been implemented in Michigan, a safety benefit analysis of various materials had not been performed. Sites were selected, and pavement marking material inventory data were combined …

Analysis Of Transit Accessibility For People With Disabilities, Rostam Khalid Mohammed Ameen Qatra

Masters Theses

The inconvenience of public transit systems and unavailability of bus stops in the United States has resulted in a heavy reliance on the private automobile. One of the main issues in transit services is accessibility, particularly for people with disabilities. This research is intended to compare estimated job accessibility measures by transit in Kalamazoo county for workers with reduced physical mobility and without. Using OpenTripPlanner (OTP) software, General Transit Feed Specification (GTFS), Open Street Map (OSM) and Longitudinal Employer-Housing Dynamics (LODES) data were analyzed to estimate job accessibility for people with mobility constraints. By using the shortest tree path method, …

Verifying Automated Prestressed Concrete Design Software For Mdot Bridge Design Standards, Hussein Kadhim Abood Khalaf

Masters Theses

The design and analysis of bridges is a very critical and time consuming process. The automation of bridges design can save us time and effort, but the designer must have enough background with structural design of bridges in order to be able to analyze and understand the output of the automated design. This research shows the design and analysis of the superstructure of the US-27 Interchange Bridge at M-57 in Gratiot County of Washington Township, Michigan. The main purpose of this research is to establish a comprehensive design example following AAHTO LRFD Bridge Design Specifications and Michigan Bridge Design Manual. …

Comparison Of Safety And Operational Performances For Three Engineering Countermeasures, Ali Hamzah Hussein Alzuhairi

Masters Theses

While there have been many studies on engineering treatments for reducing traffic crashes or for improving intersection efficiency, few studies have been simultaneously taking both impacts into consideration. This thesis analyzed impacts of engineering countermeasures and determines when these countermeasures are cost effective with respect to the amount of traffic and the number of crashes. Both crash reduction and operational costs were compared for analysis. This study specifically investigated three countermeasures: changing from permitted to protected for a left-turn on minor approaches, leading pedestrian interval (LPI), and exclusive pedestrian phase (Barnes Dance). The general Safety Performance Functions (SPFs) from the …

Developing Standard Procedures For Structural Aspects Of Slide-In Bridges In Accelerated Bridge Construction (Abc), Ozan Utku Ridvanoglu

Masters Theses

Slide-in bridge construction (SIBC) is a special method especially used to replace an existing bridge with the minimum duration road closure. In this method, new bridge superstructure is built next to the existing one and it is slid to its final position after demolishing the existing one. Applied implementations of SIBC show that several complications are experienced during bridge slide related with surface interaction. There is a need to evaluate the structural components of SIBC to develop suggestions. In this research, structural components of SIBC were investigated. The research dealt with completed SIBC implementations and numerical modelling of the slide …

A Microscopic Simulation Approach To Performance Evaluation Of Intelligent Transportation System Corridors: A Case In Michigan, Matthew Levi Clark

Masters Theses

A cost and benefit evaluation of the Michigan Department of Transportation’s (MDOT) Intelligent Transportation Systems (ITS) is performed through integration of analytical techniques and microscopic traffic microsimulation. Observed freeway corridor incident logs and characteristics are studied to determine representative incident management patterns on choice study corridors. The Quadstone Paramics microsimulation traffic package is used to model the selected corridors during various analysis scenarios and investigate the effects of ITS on freeway incident management performance.

Fragility Assessment Of High-Rise Reinforced Concrete Buildings, Hezha Sadraddin

Masters Theses

This research presents a probabilistic seismic responses analysis of high-rise reinforced concrete (RC) buildings using fragility assessment method. Three RC buildings, having the same plan dimension and height (12 story each) but different in structural configurations, were designed and their seismic responses were compared. First building is a Moment Resisting Frame (MRF), second is a MRF with exterior shear walls, and the third building consists most shear walls. Buildings were designed for high-seismic activity zone (i.e. Los Anglos) using the Equivalent Lateral Force (ELF) for seismic loading calculation. Sixteen real ground motion pairs were selected and scaled, then applied orthogonally …

An Integral Framework For Sustainable Building Design, Bushra Asfari

Masters Theses

Selection of materials for building design is a delicate process hinged of a number of factors which can be cost or environmental related, depending on the objectives of the design. This process becomes more difficult when designers are faced with several material options for each building component. This thesis presents the design and development of a framework that enables designers understand the trade-off between cost and environmental related factors when selecting materials for building design. The framework is based on the integration of Autodesk Revit, Microsoft access, and modeling modified Harmony search multi-objective optimization tool adapted to account for material …

Real-Time Hybrid Simulation With Online Model Updating, Adam Mueller

Masters Theses

Hybrid simulations have shown great potential for economic and reliable assessment of structural seismic performance through a combination of physically tested components, called the experimental substructure, and numerically simulated components, called the numerical substructure. Current hybrid simulation practices often use a fixed numerical model without considering the possible availability of a more accurate model obtained during hybrid simulation through an online model updating technique. To address this limitation and improve the reliability of numerical models in hybrid simulations, this study describes the implementation of an online model updating method in real-time hybrid simulation (RTHS). The Unscented Kalman Filter (UKF) was …

Standardized Longitudinal Connection Detail For Decked Precast Prestressed Concrete Girders, Ramzi Muftah Ali Abduallah

Masters Theses

The use of decked precast prestressed concrete girders (DPPCG) is becoming popular in accelerated bridge construction. DPPCGs are assembled and connected on site using grout or concrete longitudinal connections. The durability performance of these connections is a concern. The objective of this research is to document the longitudinal connection behavior with respect to its design parameters, and establish a process for developing a standardized connection detail considering the demands due to live load and temperature gradient (TG) load. In order to demonstrate this process, decked bulb-tee and decked box-beam girders were considered. Finite element models, under various types and levels …

An Automated Approach To Dynamic Site Layout Planning, Duy Huu Nguyen

Masters Theses

Dynamic site layout planning involves determining the optimum location of resources on the construction site. Site layouts are considered dynamic because construction activities and the number and nature of associated resources change as the project progresses. Previous research has focused on the use of several algorithms to address dynamic site layout problems. These efforts do not enable automated tracking of the dynamic context of construction resources, site space and activities. This research presents an automated adaptive component level system capable of generating layouts which are optimized throughout the phases of construction projects. The system involves the integration of building information …

Cyber-Adaptive Physical Systems For Automated Construction Progress Monitoring And Asset Tracking, Syed Hammad Rasheed

Masters Theses

Despite the benefits of building information models as a means of communication, collaboration and integration in construction projects, their use is often limited to the design and tendering/bidding stage. Potential of building information models lies in its implementation during construction, operations and maintenance phases of a facility’s lifecycle. Tight Integration of building information model and physical facility by means of computational resources is required to achieve this potential such that changes in one environment are automatically reflected in the other. This is termed a cyber-adaptive physical systems approach. This research investigates the applicability of a cyber-adaptive physical systems approach in …

The Implementation Of A Versatile Pseudodynamic Hybrid Simulation For Seismic Evaluation Of Structural Systems, Chelsea Griffith

Masters Theses

Pseudodynamic hybrid simulation technique was developed to evaluate structural seismic performance by physically testing the critical portion with the remaining structure simulated using a numerical model in the computer. An incremental approach was adopted in developing the control scheme to suit multiple testing facilities and test specimens. First the small scale, predictable specimen was utilized to investigate techniques of improving stability, slowing down the loading rate and triggering the accurate force measurement in a series of at benchmark scale experiments in the Laboratory of Earthquake and Structural Simulation at Western Michigan University (WMU). A step/hold command scheme was developed and …

Commercial Construction Supply Chain Management Issues Involving Traveling Contractors, Fred Akers

Masters Theses

Supply chain management (SCM) is an important aspect of running any business. To stay competitive in today's marketplace a supply chain management system must be in place to achieve success in this volatile global environment (Fewings, 2005).

This research differentiates the issues between executing a construction project close to home compared to away from home. Being away from home, there typically is no supplier relationship established. Furthermore, the research intends to document certain issues of the commercial construction industry that develop during the execution of a project. This will be based on the comparison of having or not having an …

Incorporation Of Space Syntax Theory In Determining Safe And Efficient Construction Site Layout, Minsuck Cho

Masters Theses

Facility layout is an important to determine a proper arrangement of temporary facilities in a construction site. It significantly impacts productivity and safety of construction. The objectives of layout planning are to minimize travel distance and time, to decrease the facility transportation and setup costs, and to improve site safety. Despite the importance of facility layout, it is often overlooked in the planning phase. Several models have been developed taking some of these factors into consideration; however, construction managers and site planners often regard cost as the most important factor in layout planning and pay less attention to safety and …

Development Of Knowledge Base Of Concrete Bridge Maintenance System, Bahre Karam

Masters Theses

Bridges are the key elements of any transportation system of a country. Bridges are expensive structures and therefore, it's essential to maintain and repair them on regular basis. Almost one third of the bridges in United States are reported to be in some what deteriorated conditions. This Research presents the development of knowledge base for decision support system for concrete bridges.

During this research various concrete bridge problems are investigated including COlTosion, delamination, cracks, spalling and scour etc. The inspection tools and techniques are addressed in order to identify these problems both for above and below water surface. The various …

Computer Model To Select Leed Certification For Building Projects, Ruba Mirghani Mohammed

Masters Theses

According to the US Green Building Council (USGBC) residential and commercial buildings in the United State consume huge amounts of natural resources; pollute the environment, and generate large amounts of waste, all of which affect the environment, economy, public health, and productivity. As a result, USGBC committees developed the Leadership in Energy and Environmental Design (LEED) rating system to help professionals improve the quality of buildings and lessen their impact on the environment.

The (LEED) Green Building Rating System is a point-based system for certifying the level of a building's sustainability. There are four LEED certification categories: (1) Certified, (2) …

Simulation Based Evaluation Of Parking Facilities, Niru Tiwari

Masters Theses

Transportation facility has emerged as one of the main indicators of a national's prosperity at the advent of 21^st century and is the backbone of American commerce and industry. There are over 600 million motor vehicles that are driven in the world today and the number of cars in use is expected to be doubled in next 30 years. As the number increases, more parking spaces should also be provided; however, it is difficult to supply sufficient parking space due to space limitations. To meet the need, new types of parking and new parking technologies have been introduced. However, …

Repair, Inspection And Maintenance Methods Of Steel Bridges, Deepak Koirala

Masters Theses

Transportation infrastructure is the backbone of American commerce & industry at the advent of the 21^st century. Bridges are the key elements of the transportation system of a country. According to National Bridge Inventory 2005, there are approximately six hundred thousand bridges in United States, among them nearly one third of bridges are functionally obsolete. A lack in performance of such structures, with respect to minimum acceptable standards, has direct impact not only on the highway system but also on public safety as well as economic growth. Systematic and well-designed research will provide the most effective approach to the …

Evaluation Of Mechanical Properties Of Recycled Aggregate Concrete, Sajjad Ali Khan

Masters Theses

The maintenance and repair work in the civil engineering infrastructures develops the production of huge wastes which causes the growth of waste piles, additional costs in construction projects and some environmental problems. If this waste is recycled and used again in construction projects, it will help to overcome the problems discussed earlier. Moreover, if natural aggregates are supplemented by recycled aggregate, it will preserve the natural resources and also put a pause in the deterioration of natural landscape.

This thesis addresses the importance of using recycled aggregate in concrete structures. Its practical feasibility in construction projects is studied in light …

Evaluation Of Mechanical Properties Of Self-Consolidating Concrete, Bhusan Basnet

Masters Theses

The concept of Self-Consolidating Concrete is a fresh and rapidly ramping technology in USA, but in some other continents such as Japan and Europe it is in fully fledged stage. The development of this technology has a high potential to economize construction minimizing labor, scheduled time and equipment eliminating consolidation process. In USA, construction professionals are reluctant to its in-effect application because of lack of deliberate and methodological steps for production and applications. The lack of study of its durability characteristics and confusion in design and production process are seems to be vital factors hindering full scale production and application …

Alkali Silica Reaction In Virgin And Recycled Aggregates: State Of The Art And Experimental Investigation Using Astm C 1260 And The Staining Method, Shadi Sami Bajjali

Masters Theses

Alkali silica reaction (ASR) is one of the most prevalent causes of concrete deterioration worldwide. A study done in 1995 showing the impact of ASR on structures stated that 104 concrete dams and spillways, massive concrete structures, have been damaged by alkali silica reaction up to date. Since its discovery by Stanton (1940), there has been significant research on ASR, and major advances have been made in understanding the mechanism underlying ASR-induced expansion and in developing methods of preventing ASR in new and existing concrete through proper measures including proper materials selection and mixture proportioning.

This thesis summarizes the findings …

The Detection Of Common Concrete Bridge Deck Defects Using The Thermography, Impact Echo, And Ground Penetrating Radar, Saleh Z. Nabulsi

Masters Theses

The transportation infrastructure in the United States is deteriorating and will require significant improvements. A recent report by the American Society of Civil Engineers (ASCE) gave an overall grading of D⁺ to the nation's infrastructure. Approximately 162,000 of the nation's bridges are structurally deficient or functionally obsolete. The total estimated cost to bring conditions to acceptable levels over the next two decades would exceed $1.9 trillion. Consequently, innovations in the area of transportation infrastructure maintenance and rehabilitation are key to the health and wellness of this valuable national asset.

A major component of maintenance and rehabilitation is the ability …

Decision Support System For Bridge Maintenance, Imran Fazal

Masters Theses

Three main problems that deteriorate bridge decks are cracking, delamination and corrosion. Once concrete bridge deck is infected with any of the three problems, it becomes susceptible to more serious structural and architectural problems. Corrosion, cracking and delamination sometimes occur in tandem in concrete bridge decks, which makes the situation even more worse.

Pontis, which has been successfully employed by various department of transportation is basically a network level BMS which prioritize bridges or groups of bridges for repair and rehabilitation funds. In this scenario researchers and scholars agree that along side Pontis certain other project specific BMS (Expert systems …

Color Management Of Desktop Input Devices: Quantitative Analysis Of Profile Quality, Xiaoying Rong

Masters Theses

This thesis investigates the color management principle and input device profiling. The input devices discussed in this thesis are flatbed scanners.

In this thesis, the human visual system, CIE L*a*b* color space, ICC profiles are reviewed, and the evaluation of profile quality is discussed. Grayscale and standard color targets of three primary suppliers are used to create profiles for a scanner. The quantitative analyses of the quality of different profiles, created by two primary commercial profiling software, are conducted according to the Delta-E of the CIE L*a*b* color space. Finally, the relationship of different color targets and profiles for desktop …

Innovative Contracting Prequalification/Selection Model Using Analytical Hierarchy Process (Ahp), Saad J. Zidan

Masters Theses

Design-Build, Cost-Plus-Time, and warranty are the three innovative contracting methods that the Federal Highway Administration (FHWA) decided to fund. FHWA allowed the usage of these methods in federally funded projects if this will result in reducing time, improving quality, and saving tax payers' money. Prequalification is recognized as the best way of assuring that contractors do have the required qualifications to deliver projects successfully. Prequalification is even more critical when low-bid selection method is used with any of the innovative contracting, since incompetent contractors may get awarded for low-bids that are not based on valid assumptions.

This study presents a …

Development Of A Redesign Plan For Moore Hall Using Architectural Principles Of Green Building And Sustainable Design, Alkhaziam Saad

Masters Theses

An existing in-use office and classroom building on Western Michigan University's main campus was chosen for a redesign project which incorporated study of architectural principles of green building and sustainable design. The study emphasized the central importance of buildings themselves in modem life, their effects on building users and their work, their effects on user relationships with one another and the surrounding environment, and the need to enhance the building's positive, natural, and life-supporting relationship with the total environment including the users.

The redesign problem statement reflected issues and ideas from recent architectural and building construction literature, which emphasized green …

Future Housing In The United States: Senior’S Housing Demand, Sandeep Singh

Masters Theses

In the United States, persons born between 1942 and 1964 are within 10 to 15 years of traditional retirement age and are identified as baby boomers. The data shows that the number of persons aged 65 years and older have grown from 10 percent of the population in 1970 to nearly 13 percent in 1996. Furthermore, the population that is 65 years old or older is projected to be 20 percent of the population in 2030. As a result, the demographic change nurtures a demand for senior’s housing.

On the other hand, the concern is for the elderly living in …