Construction Engineering and Management Commons^™

Network Interdependency Modeling For Risk Assessment On Built Infrastructure Systems, Vhance V. Valencia

Theses and Dissertations

As modern infrastructures become more interconnected, the decision-making process becomes more difficult because of the increased complexity resulting from infrastructure interdependencies. Simulation and network modeling provide a way to understand system behavior as a result of interdependencies. One area within the asset management literature that is not well covered is infrastructure system decay and risks associated with that decay. This research presents an enhanced version of Haimes' input-output inoperability model (IIM) in the analysis of built infrastructure systems. Previous applications of the IIM characterized infrastructure at the national level utilizing large economic databases. This study develops a three-phased approach that …

The Performance Of Risk Management And Innovation In Construction Manager/General Contractor Delivery In Civil Construction Applications, Rebecca M. Owens

Theses and Dissertations

Project teams that deliver high risk, complex projects in the civil construction industry need tools to enable successful delivery. Construction Manager/General Contractor (CM/GC) is an innovative alternate delivery method, providing one such a tool. CM/GC furnishes public agencies with an attractive option for delivering projects in a less adversarial and more constructive manner by involving the contractor during design. The sophisticated public owner does not have to relinquish control of the details of the design in order to accelerate the schedule or see the benefits of real-time cost estimating data. There are also significant cost and schedule benefits with not …

In-Plane Loading Of Brick Veneer Over Wood Shear Walls, Elias Anis Toubia, James M. Lintz

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

In the design of wood stud walls with brick veneer, current design building codes specify that the wood stud wall should resist all in-plane and out-of-plane loads (IBC 2009). For out-of-plane loads, this assumption is entirely justified as the brittle brick veneer will crack and lose its capacity to resist bending. For in-plane loads, the brick veneer is significantly stiffer than the wood shear wall, and the veneer is unlikely to crack before the wood shear wall reaches its allowable capacity. The assumption that the wood shear wall resists the entire load is based on the further assumption that the …

Standardized Longitudinal Connection Detail For Decked Precast Prestressed Concrete Girders, Ramzi Muftah Ali Abduallah

Masters Theses

The use of decked precast prestressed concrete girders (DPPCG) is becoming popular in accelerated bridge construction. DPPCGs are assembled and connected on site using grout or concrete longitudinal connections. The durability performance of these connections is a concern. The objective of this research is to document the longitudinal connection behavior with respect to its design parameters, and establish a process for developing a standardized connection detail considering the demands due to live load and temperature gradient (TG) load. In order to demonstrate this process, decked bulb-tee and decked box-beam girders were considered. Finite element models, under various types and levels …

Establishing Key Performance Indicators To Measure The Benefit Of Introducing The Facilities Manager At An Early Stage In The Building Information Modelling Process, Barry Mcauley

Conference papers

The Facilities Manager occupies a unique position within the lifecycle of a building asset, as he/she is one of the only AEC / FM professionals who is in a position to view the product of the entire design and build process and, is responsible for the operational phase which incurs approximately five times the initial capital cost. Despite the potential benefits that the Facilities Manager offers, this profession still does not command the recognition it deserves within the AEC/FM sector. This is beginning to change through the introduction of Building Information Modelling (BIM). In order for the BIM process to …

Evaluation Of Alternative Project Delivery Methods In Water And Wastewater Projects, Ruiko Maharjan

UNLV Theses, Dissertations, Professional Papers, and Capstones

The United States (U.S.) is facing significant challenges in addressing aging water infrastructure. Most of the drinking water infrastructure is reaching the end of their useful lives. The American Water Works Association (AWWA) estimated that it will cost about $1 trillion to repair or replace drinking water pipes. Over the next 20 years, it will cost about $298 billion to fix or expand pipes of the nation's wastewater and storm-water systems (AWWA, 2012). Owners, engineers, and contractors are using Alternative Project Delivery (APD) methods - e.g., Design-Build Construction Management-at-Risk Construction Management/General Contractor- to build water and wastewater projects in order …

Performance Comparison Of Design-Build And Construction Manager/General Contractor Highway Projects, Binita Shakya

UNLV Theses, Dissertations, Professional Papers, and Capstones

Researchers have conducted numerous studies comparing project performance of design-bid-build (DBB) and design-build (DB) highway projects. However, little research has been done to compare the performance of DB and construction manager/general contractor (CM/GC) highway projects. Therefore, an exploratory study was conducted to compare the performance of 55 DB and 34 CM/GC highway projects from various States Departments of Transportation (DOTs) in terms of cost, change orders, and construction intensity. The results showed that contract award cost growth was significantly lower in DB projects than in CM/GC projects. In contrast to this, the total cost growth of DB projects was higher …

A Comparative Study Of Performance, Impediments, Advantages, And Disadvantages Of Construction And Professional Disadvantaged Business Enterprises, Ravi Sharma

UNLV Theses, Dissertations, Professional Papers, and Capstones

Construction and professional disadvantaged, minority, and women business enterprises (DBE/MBE/WBEs) face several impediments that hinder their business growth. A questionnaire survey was conducted to determine the important factors that affect their business performance, impediments faced by these business enterprises, advantages, and disadvantages of being DBE (DBE will be an umbrella designation for DBE, MBE, and WBE). This study compares the difference in responses from these two groups. A total of 333 business enterprises responded to the questionnaire. The survey results showed that construction firms gave significantly higher importance to "financial" issues and "safe work practices" as their most important factors …

Creating Interactive Facilities Management Capabilities Through Building Information Modelling As A Tool For Managing The Irish Public Sector Estates, Barry Mcauley, Alan V. Hore, Roger West, Deborah Rowland

Conference papers

The Irish Government manages estates that are faced with increased pressure on their greenhouse gas emissions, as well as, poorly managed assets that leave it increasingly difficult for an effective Facilities Management (FM) process to be operated. The FM processes represents the most costly stage in the life-cycle of a building and must now take priority in the design process, as the operating and maintenance costs can be up to five times the capital costs, with the business operating costs reaching up to two hundred times the capital costs over the life of the building. In order for Ireland to …

Public / Private Bim: An Irish Perspective, Barry Mcauley, Alan V. Hore, John Deeney

Conference papers

The current economic difficulties have affected most practitioners within the industry and, as a result, many firms and contractors are bidding for fewer projects, resulting in below-cost tenders. It is clear that, many firms and contractors are now operating on thin margins; which makes it increasingly difficult for them to commit to the introduction of new software applications and system upgrades. The transition to Building Information Modelling (BIM) from traditional 2D CAD by Irish firms and contractors has been a relatively slow process compared with our international colleagues. There are many reasons for this, including lack of resources, lack of …

Establishing Key Performance Indicators To Measure The Benefit Of Introducing The Facilities Manager At An Early Stage In The Building Information Modelling Process, Barry Mcauley, Alan V. Hore, Roger West

Conference papers

The Facilities Manager occupies a unique position within the lifecycle of a building asset, as he/she is one of the only Architectural, Engineering, and Construction/Facilities Management (AEC / FM) professionals who is in a position to view the product of the entire design and build process. Despite the potential benefits that the Facilities Manager offers, this profession still remains largely undeveloped and still does not command the recognition it deserves within the AEC/FM sector. This is beginning to change through the introduction of Building Information Modelling (BIM) which can offer a new level of functionality for the management of buildings …

Establishing Key Performance Indicators To Measure The Benefit Of Introducing The Facilities Manager At An Early Stage In The Building Information Modelling Process - Presentation, Barry Mcauley

Conference papers

No abstract provided.

Creating Interactive Facilities Management Capabilities Through Building Information Modelling As A Tool For Managing The Irish Public Sector Estates - Presentation, Barry Mcauley

Conference papers

No abstract provided.

Bs News November/December

Building Services Engineering

No abstract provided.

Compression Testing And Failure Modes Of Steel-Concrete Composite (Sc) Structures For Nuclear Containment, Patrick Michael Wanamaker, Amit H. Varma

The Summer Undergraduate Research Fellowship (SURF) Symposium

Although being able to provide much cleaner power than burning coal and other fossil fuels, nuclear power plants are still a tough sell to the general public due to their history of being spontaneously dangerous. The containment structures surrounding these nuclear plants, however, can play a huge role in reducing the risks associated with them. Relatively new designs for these containment assemblies, known as SC (steel-concrete composite) structures, aim to increase the strength and durability of the containment facilities while keeping costs down. By varying the spacing between shear studs, the ratio of concrete to steel, and the ratio of …

Using Ultrasonic Pulse Velocity (Upv) To Predict Properties And Performance Of Pervious Concrete, Jeremy Adato, Norbert Delatte

Undergraduate Research Posters 2013

Pervious concrete is a type of porous portland cement concrete with interconnected voids. This material has been increasingly used to reduce the amount of stormwater runoff from paved areas. It has also been shown to improve the water quality near low volume and low speed pavements as well as in parking lots. Due to the low compressive strength of pervious concrete associated with the high void content, it currently is not used in highway structures except perhaps as an overlay for conventional concrete pavement. The large, open pore structure of this material allows water to pass through its structure, thereby …

Bs News September/October

Building Services Engineering

No abstract provided.

Advancing The Facilities Management Process In Ireland Through The Implementation Of Building Information Modelling Within The Public Sector, Barry Mcauley, Alan V. Hore, Roger West

Conference papers

It is widely accepted that it costs up to five times more to operate and maintain a building than to construct it. Despite this statistic the Irish construction sector has done little to move towards cutting edge technologies that will help in addressing this impact on life cycle cost. This is due partly to the fact that the Irish construction sector continues to operate in a depressed state. Despite this harsh reality Ireland must find a way to create a public sector that has a more energy efficient and enhanced physical environment in which to operate without sacrificing user thermal …

Parameterizing Analytical Models To Support An Empirically Based Warehouse Design Methodology, Lisa Thomas

Graduate Theses and Dissertations

Research in the area of warehouse design is characterized by a myriad of analytical models that address one, typically small and isolated, area of the warehouse. These models, although important in gaining insight into one question of warehouse design, are of limited value when one considers the larger question of overall warehouse design. Thus, research in the area of overall warehouse design typically consists of procedure-driven processes based on qualitative factors and not the quantifiable results of analytical models.

In contrast, practitioners have significant empirical data related to how a design alternative performs in an industry, a company, or a …

A Comparative Analysis Of Energy Modelingmethods For Commercial Buildings, Spencer Mark Salmon

Theses and Dissertations

This thesis researched the accuracy of measured energy data in comparison to estimated hand calculation data and estimated building energy performance simulation data. In the facility management industry, there is minimal evidence that building energy performance software is being used as a benchmark against measured energy usage within a building. Research was conducted to find examples of measured energy data compared to simulated data. The study examined the accuracy of a simulation software and hand calculations to measured energy data. Data suggests that comparisons may be made between building energy performance simulated data and measured data, though comparisons are solely …

Observations Of Peak Strength Behavior In Csa Cement Mortars, Joshua V. Brien, Kevin R. Henke, Kamyar C. Mahboub

Civil Engineering Faculty Publications

The purpose of this study was to assess the mechanical property performance behavior of calcium sulfoaluminate (CSA) cement mortar when cured at ambient laboratory temperature of ~23°C (73°F) and constant 50% relative humidity for an extended period of time. Four CSA cement mortars were tested. Three CSA cement mortars contained equivalent mass amounts of calcium sulfate; whereas, the fourth mortar contained double the amount of calcium sulfate. The three CSA cement mortars containing constant mass amounts of calcium sulfate differed as the specific type of calcium sulfate varied across the three formulations—one mortar containing solely anhydrite, one mortar contained half …

Bs News July/August

Building Services Engineering

No abstract provided.

Impact Of Prevailing Wages On The Cost Among The Various Construction Trades, Alan Atalah

Construction Management Faculty Publications

In 1997, the Ohio Senate passed Senate Bill 102 which established the Ohio School Facilities Commission as a separate agency to oversee the rebuilding projects of the public schools in Ohio. The bill also exempted the construction contractors from paying prevailing wages on these projects on the hypothesis that this exemption would lower the construction cost. The purpose of this study is to investigate this hypothesis through the statistical analysis of 8,093 bids received from the years 2000 through 2007 for the schools’ construction. Union contractors who paid their workers union wages and non-union contractors who did not pay prevailing …

Airport Runway Heating System, Greg Wang, Curtis Reedy

Electrical Engineering

According to the Federal Aviation Administration, flight delays cost airlines $22 billion annually (Rapajic 16). Snow and ice buildup on the tarmacs are a major contributor to these delays in regions where freezing weather conditions are common. Current solutions such as anti-freeze chemicals and snowplows are ineffective and costly. Implementing a radiant heating system, specifically pipes running hot liquid within or below the runways, can help maintain the surface above freezing temperatures. Such a system has yet to be installed in a functioning airport because of its complexity and high cost. However, the FAA provides funding for infrastructure improvements, and …

1976 Montreal Olympics: Case Study Of Project Management Failure, Ashish Patel, Paul A. Bosela, Norbert Delatte

Civil and Environmental Engineering Faculty Publications

A successful engineering project must include its timely and economic completion. A project management failure can lead to delays and cost overruns. One example of a project that greatly exceeded its projected budget is the construction of the multiple facilities for the 1976 Olympic Games in Montreal. These included the Olympic Stadium, a velodrome for bicycle events, and the Olympic Village to house the athletes. This case study reviews the circumstances of the cost increases and the design decisions and other circumstances that led to them. The difficulties were brought on by an unrealistic schedule to complete the facilities before …

Design, Construction, And Evaluation Of A Hydraulic Oil Filtration Cart, Eric Steiger

BioResource and Agricultural Engineering

This report discusses the design, construction, and evaluation of a hydraulic oil filtration car sponsored by Papich Construction Inc. This company developed the need for a filter cart system to service equipment by flushing and cleaning the oil in hydraulic reservoirs and systems. The opportunity of reviewing an existing product from Caterpillar was taken to obtain basic design parameters. This car however, did not meet all the needs preferred by the service technicians of Papich; thus leading to the idea of a custom filter cart.

The filter cart is composed of a square tube frame sitting on pneumatic no-flat castor …

Spurlock, Christy Leigh, B. 1963 (Mss 451), Manuscripts & Folklife Archives

Manuscript Collection Finding Aids

Finding aid only for Manuscripts Small Collection 451. Paper titled “White Stone Quarry of Bowling Green, KY” written by Christy Leigh Spurlock for a Western Kentucky University history department independent study project. Includes research materials such as maps, deeds, photos, and transcriptions of interviews with former quarry employees and their family members.

American Architectural, Engineering And Construction Companies Working In The Green Building Industry In The Republic Of India, Matthew O. Harbour

Construction Management Theses

This research paper has addressed the problem statement "Too few American Architectural, Engineering, and Construction (AEC) companies are participating in the green building market in the Republic of India." This paper provides a conceptual model to support American AEC companies to become involved in the green building market in the Republic of India. This model is a result of a literature review, an analysis of an online survey and a personal interview. This paper addresses the need for American AEC companies to remain competitive in the green building market in the Republic of India. This paper provides a brief history …

Comparison Of Personality Traits Among Estimators, Project Managers, And The Population, Alan Atalah

Construction Management Faculty Publications

The intuitive hypothesis that Construction Management Professionals (CMP) must have a high level of people skills implies that they should be different than the population at large in terms of people skills. In addition, estimators do not deal with as many people as project managers; therefore, they may not have/need as high of people skills as project managers. This paper tests these hypotheses through the analysis of 47 personality traits of 102 experienced applicants for construction management positions and compares this analysis to the traits of the overall population. The analysis suggested that (1) CMP were significantly different from the …

Pump Controller Design For Variable Primary Flow Configuration Systems, Yifan Shi

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

Pump systems are utilized widely in Heating, Ventilation and Air-Conditioning (HVAC) systems. There are mainly three configuration types: (1) the constant primary-only flow configuration, (2) the constant primary/variable secondary flow configuration, and (3) the variable primary-only flow configuration. This thesis focuses on finding the optimal control strategy for it and programming a controller for easy in-field usage.

In this thesis, the pump brake horse power (BHP) of the three pump configurations is simulated and compared using varying control methods. The best pump efficiency staging and DP reset control methods are implemented into the pump controller. A one month field experiment …