Construction Engineering and Management Commons^™

Building Services Engineering September/October 2026

Building Services Engineering

This issue of Building Services Engineering explores Ireland's net-zero transition, highlighting AI data centre liquid-cooling innovations, critical energy infrastructure updates, ASHRAE and CIBSE safety insights, commercial heat pump selections, decarbonising elevators, and examples of engineering innovation and leadership across the building services sector.

Safety And Resilience In Disaster Debris Removal And Clean-Up Operations: A Field And Training Guide For Resilience Workers In Disaster Debris Removal And Cleanup, Mohsen Shahandashti, Ph.D, P.E., Abhijit Roy, Ph.D, Zhe Yin, Ph.D, P.E., Pmp, Leed Ap, Antonio Balderrama, Ph.D, P.E., Sandesh Adhikari, Santosh Acharya

Mavs Open Press Open Educational Resources

A practical safety guide for the people who clear debris after disasters, and for the trainers who prepare them. Built for crews of every experience level--from seasoned operators to first-time volunteers--it teaches how to read a damaged site, recognize hidden and shifting hazards, work safely around heavy equipment and hazardous materials, and make sound decisions under pressure. Every chapter pairs clear guidance with a one-page field job aid, facilitator notes for trainers, and a real-world scenario, all grounded in OSHA, FEMA, EPA, and NIOSH guidance.

Safety and Resilience in Disaster Debris Removal and Clean-Up Operations Copyright © 2026 by Mohsen …

Effect Of Sugarcane Bagasse Ash Incorporated With Limestone Calcined Clay Cement On Geotechnical Properties Of Swelling Soils Relevant To Road Applications, Horris K. Nangulama, Siya P. Rimoy, John E. Elvis

Tanzania Journal of Engineering and Technology (TJET)

This study aims to investigate the use and effect of sugarcane bagasse ash (BA) incorporated with limestone calcined clay cement (LC³) as a sustainable and cost-effective alternative for stabilizing swelling soils. Therefore, BA incorporating LC³ was added to black cotton soil (BCS), known for its high swelling potential. Series of laboratory tests including free swell index (FSI), compaction, California bearing ratio (CBR), and shear strength were conducted to evaluate the performance of BA incorporating LC³ binder-stabilized BCS. Additionally, microstructural analyses using pore size distribution (PSD), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were performed to …

3d Printing In Construction: Technology And Digital Innovation, Zachary Braunstein, Tyler Fritsch, Leah Oberkehr, Ethan Arvidson

Discovery Day - Daytona Beach

The study of 3D Printing in Construction: Technology and Digital Innovation examines the growing role of additive manufacturing in transforming traditional construction practices. This literature review explores the evolution of construction 3D printing from early conceptual research on contour crafting to modern automated construction systems that integrate robotics with digital design technologies such as Building Information Modeling. The review highlights practical applications including the design and testing of a 3D printed concrete pedestrian bridge and the increasing use of 3D concrete printing in residential construction to reduce labor demands and project timelines. It also discusses advancements in printable materials, including …

Multidimensional Total Quality Management And Its Effects On Sustainability And Performance In Industrialized Building System Projects, Felix Delmonte

Mechanical and Civil Engineering Faculty Publications

This study develops and tests a multidimensional total quality management (TQM) framework to explain how distinct quality practices influence environmental sustainability, construction quality, cost and schedule performance, waste reduction, energy efficiency, stakeholder satisfaction, and overall project performance in industrialized building system (IBS) projects. Soft and hard TQM dimensions such as leadership commitment, customer focus, employee involvement, training and continuous improvement, process management, supplier quality, and data driven decision making are operationalised and linked to eight outcome constructs. Partial least squares structural equation modelling (PLS SEM) is used to estimate direct effects and to examine mediation by waste reduction and energy …

Fall Hazard Prevention: A Zero-Fatality Goal For Health, Safety, And Well-Being On Construction Sites, Alena Richardson, Chaidaliz Minguela Alicea, Nicola Kaehler, Charlene Weaver

Discovery Day - Daytona Beach

Jobsites face hazards like falls, which threaten the health, safety, and well-being of construction workers. Falls are the leading cause of all accidents and fatalities in construction, accounting for approximately 40% of all worker deaths in 2023. While achieving a zero-accident rate for falls is inherently challenging, prioritizing a zero-fatality objective represents a practical and impactful starting point. The Occupational Safety and Health Administration (OSHA) recommends a six-step action approach for the prevention and control of hazards like falls. Of particular interest, the State of Florida is consistently ranked among the highest for construction fall fatalities, often attributed to insufficient …

Building Services Engineering July/August 2026

Building Services Engineering

This issue of Building Services Engineering features heat pumps, propane usage, solar power, and ventilation for indoor air quality. Features include district heating, HVACR optimisation, lift retrofitting, EU water policy, and an interview with WiBSE Ireland Chair Heather Holt.

Evaluation Of Dredged Sediments As A Partial Replacement For Fine Aggregate In Mortar And Concrete, Ashish Gautam

Graduate Theses and Dissertations (2019 - present)

The feasibility of using dredged sediment from the Mobile River as a partial replacement for fine aggregate in mortar and concrete was investigated through a series of laboratory characterization and performance evaluation. Three dredged sediment samples (A, B and C) were initially examined, and Sample A was selected for further evaluation due to its closer resemblance to natural fine aggregate. This sample exhibited lower moisture content, higher sand equivalent values, higher specific gravity, and lower absorption. Mortar mixtures with 0, 10, 20, 30, 50, 75 and 100% dredged sediment replacement showed decreasing workability as the replacement level increased. The 20% …

Analysis Of Construction Safety Costs In Girder Erection Work On Toll Road Projects To Reduce Risks And Construction Accident Costs, Aditya Daniar Wicaksono, Rossy Armyn Machfudiyanto

CSID Journal of Infrastructure Development

The construction of toll roads, as part of Indonesia’s National Strategic Projects, plays a crucial role in enhancing mobility and economic competitiveness. Girder erection work constitutes one of the most critical phases in toll road bridge construction, characterized by high safety risks due to confined workspaces, technical complexity, and suboptimal risk management practices. This study aims to analyze construction safety costs in girder erection work to reduce risks and construction accident costs. The research process includes hazard identification, effective risk control analysis, risk impact valuation, and cost-benefit analysis of safety investments. The methods employed consist of secondary data analysis, risk …

Analysis Of Factors Influencing The Implementation Of Sustainable Project Management (Spm) In The Construction Industry In Indonesia, Ariq Farhan, Titi Sari Nurul Rachmawati

CSID Journal of Infrastructure Development

The construction industry contributes significantly to economic growth but also carries substantial environmental and social costs. Construction activities generate carbon emissions, consume natural resources, and produce large volumes of waste. Despite growing theoretical development of Sustainable Project Management (SPM) frameworks, empirical evidence on the actual level of SPM implementation in Indonesia's construction sector remains limited. This study aims to identify the factors that influence SPM implementation and measure the level of implementation as perceived by construction professionals. A quantitative survey was administered to 99 professionals across infrastructure, building, and industrial construction sectors in Indonesia. Data were collected through a Likert-scale …

A Machine-Learning-Based Systematic Framework For Modeling Compression And Recompression Indices For Florida Soils, Michael Morales

Doctoral Dissertations and Master's Theses

This thesis develops a machine-learning framework for estimating the compression index and the recompression index of Florida soils from routinely measured index properties, and reports two studies that build it. Consolidation settlement design requires both indices, and both are obtained from the incremental-loading oedometer test, which occupies a specimen for one to two weeks; the index tests that accompany it are complete within hours. Empirical correlations have filled that interval since the 1950s, but their coefficients are calibrated on specific soil populations and transfer poorly between regions. The first study analyzes 376 consolidation tests compiled for the Florida Department of …

Building Services Engineering May/June 2026

Building Services Engineering

No abstract provided.

City Farm Slo Sheep Pen Improvements, Oscar Rocha

Construction Management

City Farm SLO is a non-profit that focuses on educating under-served and at-risk youth on health, success, and environmental responsibilities. The organization’s mission is accomplished while connecting many people from different backgrounds, which include diverse ethnic, racial, and socio-economic backgrounds. City Farm SLO promotes hands-on learning, providing opportunities for Cal Poly Construction Management students to build on the farm. This senior project consists of the construction of a 50 cubic yards sheep hill, vehicle access gates, side entry gate, front catch pen, and back corral fencing. Outside of the field construction, there was extensive planning to coordinate with the farm’s …

Steel Corrosion In Underground Transportation Infrastructure, Amr M. Morsy, Islam A. Ebo, Shiv K. Janardhanan

Mineta Transportation Institute

Corrosion of buried steel, a critical component of American transportation infrastructure, remains one of the most insidious challenges due to the uncertainty associated with its estimates. Predicting when and how this corrosion happens is very difficult. This uncertainty grows exponentially with time, making corrosion estimation in the long term even more challenging, especially with buried steel and steel structures, which cannot even be monitored visually. While significant advancement has been made to understand the effect of the various corrosion parameters on soil corrosivity, there is a lack of a comprehensive understanding of how these factors collectively contribute to corrosion as …

A Machine Learning Framework For Early-Stage Cost Estimation Of Transportation Projects, Pritom Paul

Electronic Theses and Dissertations

To address the limitations of traditional planning-level cost estimating methods, such as reliance on statewide averages, heavy reliance on engineering judgment, and high levels of inaccuracy, this study developed two data-driven frameworks and corresponding tools. The first framework focused on resurfacing projects and used treatment-specific simple linear regression based on lane miles and geographic location. The second addressed a broader group of construction projects and used multiple linear regression with project length, route type, and right-of-way cost as key predictors. In both frameworks, the final estimates are computed by aggregating multiple estimates produced by county-, region-, and state-level models. The …

Building Services Engineering March/April 2026

Building Services Engineering

No abstract provided.

Application Of Fidic Epc/Turnkey Contract Under The Egyptian Public Works Contracts Law, Ahmed Alhady Dr., Mahmoud Mahmoud Ahmed Eng., Ahmed Elhakeem Prof., Mohamed Ibrahim Dr.

Civil Engineering

This study focuses on the application of FIDIC Conditions of Contract for EPC Turnkey Projects—Silver Book 1999, (FIDIC (EPC&T)), when governed by the Egyptian Law of Contracts concluded by public bodies No. 182 of 2018 (ELC) due to the conflicts that may arise from such application. Hence, this study identifies specific FIDIC (EPC&T) 1999 clauses that have the potential for conflicts with ELC, shows the similarities and disparities between these clauses and the relevant ELC articles, and provides recommendations to ensure the successful application of FIDIC (EPC&T) 1999 under ELC. This was achieved through a multistep research methodology in which …

Building Services Engineering January/February 2026

Building Services Engineering

No abstract provided.

Impact Of Femalized Kinesthetic Learning Model On African American Middle School Girls’ Career Interest, Mercy F. Fash, Andrea Ofori-Boadu

Journal of Global Education and Research

Engaging African American middle school girls in out-of-school-time (OST) Architecture, Engineering, and Construction (AEC) programs can boost interest in male-dominated AEC careers. This study adopts Lent’s Social Cognitive Career Theory to evaluate the impact of an OST feminized AEC kinesthetic learning model (fAEC-KLM) on the career interests of this demographic. Through a qualitative research approach, fourteen (14) African American middle school girls from Guilford County, NC, completed pre- and post-interviews on how fAEC-KLM interactions influenced their AEC career interests. Inductive thematic analysis was carried out on transcribed interviews. Results show that effective components, such as lectures on AEC, bridge construction …

Development Of A Novel Innovative Umbrella Falsework System For Concrete Slabs, Abdelazem Hashim

Theses and Dissertations

Formwork is one of the major elements that contribute to the cost and duration of concrete building projects. This is why optimizing such an element can lead to huge savings to all parties involved in the construction projects. With contractors facing huge challenges in such a competitive industry and employers seeking the least price and least duration for their projects, contractors are constantly under the obligations of finding the best alternatives to deliver their projects in terms of both time and money. Therefore, the main aim of this research project is to develop a falsework system, where the falsework system …

Proposed Design Approach Of Bolted Cruciform Stiffened End-Plate Connections And Bolted Circular Flange Plate Connections Under Combined Loading For Enhanced Economy And Performance, Cesar E. Aguirre

Civil Engineering Dissertations

This research will deliver a substantive contribution to the advancement of design practice for bolted circular flange connections and cruciform stiffened end-plate connections — critically evaluating existing approaches, identifying their limitations, and proposing evidence-based design frameworks that enhance structural performance, predictability, and safety across relevant engineering applications.In addition provide economical benefits.

Evaluating Training Effectiveness And Learning Transfer In The Kentucky Transportation Cabinet Safety Academy, Amanda L. Casolare

Theses and Dissertations--Civil Engineering

Effective evaluation of safety training is crucial to ensure that learning translates into safe work practices, particularly in high-risk public sector environments. The Kentucky Transportation Cabinet (KYTC) is developing a Safety Academy to enhance hazard recognition, risk management, and safety leadership within the organization. However, the Safety Academy has not yet been implemented, and formal evaluation methods for training have not been established. This study aimed to examine evidence-based training evaluation techniques and develop recommendations for evaluating the KYTC Safety Academy prior to program implementation.

This study employed an applied pre-implementation research design grounded in a comprehensive review of safety …

Smart Dynamic Concrete: Effect Of Coarse Aggregate Size Distribution On Fresh, Mechanical And Durability Properties, Venu Sipelli, Kamineni Aditya, Shravya Sripadapu

Mansoura Engineering Journal

SDC is a self-flowing concrete that demonstrates improved material efficiency through optimized aggregate gradation. Unlike SCC, which relies on high powder content for improved flowability, SDC provides improved flowability by optimized aggregate gradation, making it a promising alternative to SCC. This paper presents the fresh, mechanical, and durability performance of M40-grade SDC using OPC 53 grade cement, GGBS, CRF, and polycarboxylate-based superplasticizer. A constant cementitious content of 470 kg/m³ and water–cement ratio of 0.38 were maintained. The fresh, mechanical, and durability performances of SDC using three types of coarse aggregate combinations, namely, 70% 10 mm + 30% 20 mm, 75% …

Impact Of Natural Disasters On Construction And Engineering Solutions, Karima Ao Damson

Williams Honors College, Honors Research Projects

This Honors Research Project seeks to research and explain the impact of natural disasters on the construction and reconstruction of infrastructure in countries with the highest risk of natural disasters and compare them to the requirements in the United States in the states most prone to natural disasters. The objectives are to identify the countries most prone to natural disasters, describe the environmental impacts of the natural disasters, describe the impacts on construction and reconstruction requirements, and research whether construction and civil engineering solutions currently applied to the individual countries could be improved or reproduced in other countries exposed to …

Bond Behavior Of Uhpc-Nsc Interfaces For Bridge Deck Repair Under Flexural Loading, Larissa Santiago La Banca

Graduate Studies Theses and Dissertations 2026

The use of ultra-high performance concrete (UHPC) has increased due to its superior mechanical properties and strong bond with normal-strength concrete (NSC). It is widely used as a repair material, particularly in bridge decks, where maintenance remains a challenge. However, the interface between UHPC and NSC is often the weakest region of the composite system and requires careful evaluation.

This study investigates the bond behavior between UHPC and NSC using different surface preparations, test setups, and UHPC materials. The experimental program included unreinforced beams with vertical interfaces tested under three- and four-point flexural loading, and reinforced slabs with horizontal interfaces …

Evaluating The Impact Of Precast Vs. Cast-In-Place Concrete: A Life Cycle Assessment Of A Parking Garage In Nashville, Robert Trey Owen

Student Scholar Symposium

Concrete is one of the most widely used building materials in the construction industry, generating $64 billion in revenue, according to the Concrete Financial Insights Index. Given the material’s extensive use, construction professionals seek ways to optimize construction project budgets and schedules. Precast concrete, which is manufactured offsite and then transported to the project when needed, is a potential solution for these goals. This research aims to quantify the benefits of precast concrete over typical cast-in-place methods using a life cycle analysis for a parking garage structure located in Nashville Tennessee.

The data for the two materials will be compared …

Long Term Financial Analysis For Opry Mills Hotel And Resort, Eli Lockert

Student Scholar Symposium

In 2024 a Lipscomb Senior Design team completed a design project for the Opryland Hotel. The project, aimed at reducing humidity levels in the large greenhouse-like atrium and overall power usage, included multiple phases and equipment. This research continues the work of that team in an effort to determine whether the proposed system is a cost-effective approach. The research specifically evaluates the system outlined in the Opryland Final Design Report, completed in April of 2024. Using a holistic approach, this study employs life-cycle cost analysis (LCCA) to assess the economic feasibility of the proposed system through various empirical methods. A …

Building Services Engineering November/December 2025

Building Services Engineering

No abstract provided.

Accident Data Analytics And Ai-Based Auditory Enhancement For Highway Construction Safety, Thinh Nguyen

All Dissertations

This research develops data-driven and AI-enhanced approaches to improve worker safety in highway construction environments. The study integrates advanced analytics and auditory signal enhancement to identify high-risk worker behaviors and improve real-time safety warnings. The work consists of three core studies. The first study applies Sequential Pattern Mining and Social Network Analysis to more than 1,000 construction accident reports to identify high-risk worker actions and their hidden sequential relationships with accident types and consequences. These insights reveal sector-specific risk patterns, supporting the creation of targeted, data-informed safety interventions. The second study introduces an AI-based auditory enhancement model built on a …

Assessment Of Traffic Related Air Pollution Effects On Indoor Air Quality In Educational Buildings, Ahmed Gouda Mohamed, Mohamed Sherif Dr., Fahad Alqahtani Dr., Yousif Deeb Eng.

Civil Engineering

This study assesses the impact of traffic-related air pollution (TRAP) on indoor air quality (IAQ) within a Riyadh school. The main objectives are to pinpoint factors influencing IAQ and to evaluate the effectiveness of existing ventilation and filtration systems. Air quality Egg sensors monitored nitrogen dioxide (NO2), carbon monoxide (CO), and particulate matter (PM1.0, PM2.5, PM10) levels both indoors and outdoors over 30 days. Findings revealed average indoor PM2.5 and PM10 concentrations of 14.09 µg/m3 and 18.15 µg/m3, respectively, while outdoor concentrations averaged 20.63 µg/m3 and 27.88 µg/m3. A strong positive correlation was observed between indoor and outdoor PM levels, …