Construction Engineering and Management Commons^™

Ultra Large Container Ships : Technical Implications And Solutions For The Design Of The Vessels And Port Terminal Facilities, Evangelos Fragkoulis

World Maritime University Dissertations

No abstract provided.

An Investigation Of Employee Satisfaction And Employee Empowerment Specific To On-Site Supervisors In The Residential Construction Industry, David Lars Halvorsen

Theses and Dissertations

Employee satisfaction and empowerment are vital elements to businesses in most industries. The construction industry has various types of employees, ranging from managers and executives to on-site supervisors and laborers. This study was conducted to obtain a greater understanding about the elements and levels of satisfaction and empowerment of on-site supervisors in the residential construction industry. An on-site supervisor in the residential construction industry is responsible for coordinating and managing employees, materials, equipment, budgets, schedules, contracts, and the safety of employees and the general public. They are also the employees most frequently perceived as accountable for the success or failure …

Resilient And Residual Properties Of Asphalt Concrete: Superpave And Conventional Mix Design, Tamer Mohamed Breakah

Archived Theses and Dissertations

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Evaluation Of Mechanical Properties Of Recycled Aggregate Concrete, Sajjad Ali Khan

Masters Theses

The maintenance and repair work in the civil engineering infrastructures develops the production of huge wastes which causes the growth of waste piles, additional costs in construction projects and some environmental problems. If this waste is recycled and used again in construction projects, it will help to overcome the problems discussed earlier. Moreover, if natural aggregates are supplemented by recycled aggregate, it will preserve the natural resources and also put a pause in the deterioration of natural landscape.

This thesis addresses the importance of using recycled aggregate in concrete structures. Its practical feasibility in construction projects is studied in light …

Evaluation Of Mechanical Properties Of Self-Consolidating Concrete, Bhusan Basnet

Masters Theses

The concept of Self-Consolidating Concrete is a fresh and rapidly ramping technology in USA, but in some other continents such as Japan and Europe it is in fully fledged stage. The development of this technology has a high potential to economize construction minimizing labor, scheduled time and equipment eliminating consolidation process. In USA, construction professionals are reluctant to its in-effect application because of lack of deliberate and methodological steps for production and applications. The lack of study of its durability characteristics and confusion in design and production process are seems to be vital factors hindering full scale production and application …

A Gasless Method Of Spraying Thermoplastic Resin, Dan T. Rogers

Theses and Dissertations

This spraying method for thermoplastic resins is a new manufacturing process for applying thermoplastics to a mold or surface in an efficient way that has the potential of reducing cycle time. Spraying thermoplastic resins is similar to spraying other polymers, such as paint, with the differences being higher pressure and temperature. This method uses an injection molding machine with a modified nozzle to spray the plastic material. In this study, temperature, pressure, and nozzle size were factors that influenced the success of this spraying method. The method of spraying in this study proved spraying without a gas is possible, a …

Development Of Commercial Applications For Recycled Plastics Using Finite Element Analysis, Nanjunda Narasimhamurthy

Theses and Dissertations

This thesis investigates the suitability of thermo-kinetically recycled plastics for use in commercial product applications using finite element analysis and statistics. Different recycled material blends were tested and evaluated for their use in commercial product applications. There are six different blends of thermo-kinetically recycled plastics used for testing and CATIA is used for finite element analysis. The different types of thermo-kinetically recycled plastics blends are: pop bottles made of PolyethyleneTeraphthalate (PET), milk jugs made of High-Density Polyethylene (HDPE), Vinyl seats made of Poly Vinyl Chloride (PVC) and small amount of Polypropylene (PP) and Urethane, electronic scrap made of engineering resins …

Bs News

Building Services Engineering

No abstract provided.

Cm Facilities Update, Construction Management Department

Construction Management

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Assessing Construction Management Higher Education Strategies: Increased Demand, Limited Resources, And Over-Enrollment, Kristen Lea Wynn

Theses and Dissertations

The purpose of this research was to see how Baccalaureate Construction Management Programs accredited by the American Council for Construction Education (ACCE) were managing increased enrollments within their programs. The review of literature identified related topics, comparable studies, and relevant issues surrounding over-enrollment. Forty-nine of the 53 accredited ACCE programs responded to the survey instrument. Over two-thirds of the respondents stated that they were either approaching, or were at the limits of enrollment capacities. Most of the respondents listed limited enrollment, the use of adjunct faculty, and funding from industry as leading strategies for managing or obtaining resources. Because CM …

Alkali Silica Reaction In Virgin And Recycled Aggregates: State Of The Art And Experimental Investigation Using Astm C 1260 And The Staining Method, Shadi Sami Bajjali

Masters Theses

Alkali silica reaction (ASR) is one of the most prevalent causes of concrete deterioration worldwide. A study done in 1995 showing the impact of ASR on structures stated that 104 concrete dams and spillways, massive concrete structures, have been damaged by alkali silica reaction up to date. Since its discovery by Stanton (1940), there has been significant research on ASR, and major advances have been made in understanding the mechanism underlying ASR-induced expansion and in developing methods of preventing ASR in new and existing concrete through proper measures including proper materials selection and mixture proportioning.

This thesis summarizes the findings …

Bs News

Building Services Engineering

No abstract provided.

Establishing Public Confidence In The Viability Of Fingerprint Biometric Technology, Nathan Alan Green

Theses and Dissertations

The most common personal authentication techniques used for identity management employ a secret PIN or password that must be remembered. The challenge, for a given user, is that a multitude of such codes must be recalled over the course of the day for transactions involving distinct computer applications. Password mania prevails. Fingerprint biometric technology is an ideal alternate solution to this password recall problem. In spite of their availability for nearly thirty years, fingerprint biometric systems still remain uncommon in public sectors of industry such as education, government, and technology. Technology has improved sufficiently that false acceptance and rejection rates …

Integrating Value Stream Mapping And Simulation, Michelle E. Scullin

Theses and Dissertations

An important principle in Lean manufacturing, value stream mapping (VSM) can be helpful in understanding how process flow and information flow affect each other. A VSM is a static picture of a process that allows the user to see where value is added into the value stream. Simulation is used to evaluate the behavioral issues of processes. In a manufacturing realm this means simulation shows how each operation affects other operations so determinations can be made about where bottlenecks or other problems exist in the process. Theoretically, the integration of VSM and Simulation can aide in process improvement by showing …

Bs News

Building Services Engineering

No abstract provided.

Nonlinear Model For Reinforced Concrete Under Cyclic Loading, Aly Said, M. Elmorsi, M. Nehdi

Civil and Environmental Engineering and Construction Faculty Research

Most of the available shear models for reinforced concrete rely on empirical formulations. In this study, a rational shear stress function is used to define the shear stress–strain envelope for reinforced concrete. Cyclic rules are proposed to define the loading, unloading and reloading relationships for reinforced concrete under shear stress reversals. A normal stress function describing the cyclic relationship of concrete under axial stress is also introduced. The proposed functions are verified using experimental data of reinforced concrete panels tested under monotonic and cyclic loading. Subsequently, the normal and shear stress functions along with their cyclic rules are integrated in …

Bs News

Building Services Engineering

No abstract provided.

The Social And Economic Costs Of Employee Misclassification In The Maine Construction Industry, Françoise Carré, Randall Wilson

Center for Social Policy Publications

With this study, a cross disciplinary team of the Center for Construction Policy Research has taken a first and significant step in documenting employee misclassification in the Maine construction industry. This report documents the dimensions of misclassification and its implications for tax collection and worker compensation insurance.

Misclassification occurs when employers treat workers who would otherwise be waged or salaried employees as independent contractors (self employed). Or as one report commissioned by the U.S. Department of Labor put it, misclassification occurs “when workers (who should be) getting W-2 forms for income tax filing instead receive 1099-Miscellaneous Income forms."

Decision Support System For Bridge Maintenance, Imran Fazal

Masters Theses

Three main problems that deteriorate bridge decks are cracking, delamination and corrosion. Once concrete bridge deck is infected with any of the three problems, it becomes susceptible to more serious structural and architectural problems. Corrosion, cracking and delamination sometimes occur in tandem in concrete bridge decks, which makes the situation even more worse.

Pontis, which has been successfully employed by various department of transportation is basically a network level BMS which prioritize bridges or groups of bridges for repair and rehabilitation funds. In this scenario researchers and scholars agree that along side Pontis certain other project specific BMS (Expert systems …

Bs News

Building Services Engineering

No abstract provided.

The Detection Of Common Concrete Bridge Deck Defects Using The Thermography, Impact Echo, And Ground Penetrating Radar, Saleh Z. Nabulsi

Masters Theses

The transportation infrastructure in the United States is deteriorating and will require significant improvements. A recent report by the American Society of Civil Engineers (ASCE) gave an overall grading of D⁺ to the nation's infrastructure. Approximately 162,000 of the nation's bridges are structurally deficient or functionally obsolete. The total estimated cost to bring conditions to acceptable levels over the next two decades would exceed $1.9 trillion. Consequently, innovations in the area of transportation infrastructure maintenance and rehabilitation are key to the health and wellness of this valuable national asset.

A major component of maintenance and rehabilitation is the ability …

Determination Of Wall Thickness And Height When Cutting Various Materials With Wire Electric Discharge Machining Processes, Sangseop Kim

Theses and Dissertations

This thesis looks at the capabilities of cutting thin webs on Wire EDM machines that are difficult or impossible to machine using conventional methods. Covered is an investigation of how different material and web thickness affect the capability of machining thin-walled parts.

Five different metals are used for the test; Aluminum 6061 T6, Yellow Brass SS360, 420 Stainless Steel, D2 unheat-treated tool steel 25-30 RC, and D2 heat-treated tool steel 60-65 RC. The small parts were cut to a 6mm (0.2362 inch) height with six different wall thicknesses: 0.30mm (0.0118 inch), 0.25mm (0.0098 inch), 0.20mm (0.0078 inch), 0.15mm (0.0059 inch), …

A Tool Wear Comparative Study In Turning Versus Computer Simulation In 1018 Steel, Woodrow D. Miner

Theses and Dissertations

The material removal process uses cutting tools in order to produce the desired shape of the workpiece. Tool wear has been a problem for cutting tools, since cutting tools wear and break. Research has been accomplished in the tool wear field for tool life and more recently tool wear. The computer generation has created a method to simulate the material removal process. These computer simulations model the cutting tool reaction with the workpiece. Many of the simulation models use finite element analysis to calculate the reaction of the cutting tool. Different finite element models are being used throughout the world …

The Purposes And Evaluation Methods For State Residential General Contractor Licensing, James Ellis Fenn

Theses and Dissertations

The main topic in the licensing debate is whether licensing affects construction quality. Available literature and previous studies indicate that it does not. The real question is not whether licensing improves quality, but whether the improving quality is the actual purpose of licensing. There is little information available on the purpose of licensing as defined by state licensing departments as well as a general lack of information on how states evaluate whether licensing is fulfilling the intended purpose. In order to effectively resolve some of the issues surrounding the construction licensing debate, the true purpose of licensing and the methods …

Excavated Tanks And Hillside Dams, Martyn Keen

Natural resources published reports

An excavated tank is an earth structure on near level land used to impound water, in which a percentage of the storage capacity is below ground level. It includes similar structures constructed on sloping land, referred to as 'hillside dams'. These are specific types of the group of water-impounding structures known as 'farm dams'.

Development Of Multiple Growth Strategies For Use In Developing Traffic Forecasts: A Robustness Approach, Deogratias Eustace, Eugene R. Russell, E. Dean Landman

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Decisions that may be based on misleading forecasts may lead to a misallocation of funds and to under-performing projects during construction and operation. Poor projections of demographic and socioeconomic data are usually cited as the major source of poor traffic assignment projections and hence, unfavorably conceived planning and construction of street and highway infrastructure facilities.

This report evaluated the accuracy of long range projections by using a transportation study done the in 1970s, projecting transportation demand 20 years into the future. The projected travel model inputs were compared with what actually happened after the horizon year had been reached and …

Site Assessments, Martyn Keen

Natural resources published reports

The processes of collecting and recording site data as part of the preliminary tasks leading to a landscape or project design.

This standard applies to landscape and project designs for catchments of any size. Designs include: the installation of conservation earthworks; revegetation; land use planning; or implementation of erosion and sediment control practices. The design may also include any combination of the above