Investigating Affordable Indoor Mobile Lidar Sensing For Bim-Based Facility Management: A Usability And Condition Sensitivity Study, Amr Mousa, Ahmed Elyamany, Mohamed Nabawy

Civil Engineering

This paper analyzes how capture parameters affect indoor mobile LiDAR scan fitness for-purpose for BIM-based facilities management. Despite extensive research on geometric accuracy and automated modelling performance, limited work has systematically examined how acquisition conditions influence the practical usability of raw scans for BIM/FM applications. A controlled experimental investigation used an Apple iPhone 16 Pro's integrated LiDAR sensor to capture 36 indoor scans under twelve factorial combinations of scan speed, illumination level, and motion pattern. Each condition was repeated three times. Usability was assessed using several components,Fco a gate-based pass/fail criterion, enclosure geometry, openings, ceiling services, and geometric clarity using …

Application Of Fidic Epc/Turnkey Contract Under The Egyptian Public Works Contracts Law, Ahmed Alhady Dr., Mahmoud Mahmoud Ahmed Eng., Ahmed Elhakeem Prof., Mohamed Ibrahim Dr.

Civil Engineering

This study focuses on the application of FIDIC Conditions of Contract for EPC Turnkey Projects—Silver Book 1999, (FIDIC (EPC&T)), when governed by the Egyptian Law of Contracts concluded by public bodies No. 182 of 2018 (ELC) due to the conflicts that may arise from such application. Hence, this study identifies specific FIDIC (EPC&T) 1999 clauses that have the potential for conflicts with ELC, shows the similarities and disparities between these clauses and the relevant ELC articles, and provides recommendations to ensure the successful application of FIDIC (EPC&T) 1999 under ELC. This was achieved through a multistep research methodology in which …

Assessment Of Traffic Related Air Pollution Effects On Indoor Air Quality In Educational Buildings, Ahmed Gouda Mohamed, Mohamed Sherif Dr., Fahad Alqahtani Dr., Yousif Deeb Eng.

Civil Engineering

This study assesses the impact of traffic-related air pollution (TRAP) on indoor air quality (IAQ) within a Riyadh school. The main objectives are to pinpoint factors influencing IAQ and to evaluate the effectiveness of existing ventilation and filtration systems. Air quality Egg sensors monitored nitrogen dioxide (NO2), carbon monoxide (CO), and particulate matter (PM1.0, PM2.5, PM10) levels both indoors and outdoors over 30 days. Findings revealed average indoor PM2.5 and PM10 concentrations of 14.09 µg/m3 and 18.15 µg/m3, respectively, while outdoor concentrations averaged 20.63 µg/m3 and 27.88 µg/m3. A strong positive correlation was observed between indoor and outdoor PM levels, …

Toward Autonomous Pavement Inspection: An End-To-End Vision-Based Framework For Pci Computation And Robotic Deployment, Nada El Desouky, Ahmed Torky, Mohamed Elbheiri, Mohamed Eid, Mohamed Ibrahim

Civil Engineering

Advancements in robotics and computer vision are transforming how infrastructure is monitored and maintained. This paper presents a novel, fully automated pipeline for pavement condition assessment that integrates real-time image analysis with PCI (Pavement Condition Index) computation, which is specifically designed for deployment on mobile and robotic platforms. Unlike traditional methods that rely on costly equipment or manual input, the proposed system uses deep learning-based object detection and ensemble segmentation to identify and measure multiple types of road distress directly from 2D imagery, including surface weathering, a key precursor to pothole formation often overlooked in previous studies. Depth estimation is …

Integrated Decision Support System For Optimizing Time And Cost Trade Offs In Linear Repetitive Construction Projects, Ahmed Gouda Mohamed

Civil Engineering

time and cost performance. Traditional scheduling techniques often struggle to effectively address these complexities. This paper aims to enhance project optimization by introducing a metaheuristicbased Time-Cost Trade-off (TCT) framework specifically designed for repetitive project environments. Unlike previous studies that focus solely on single-algorithm applications, this research evaluates two metaheuristic optimization strategies—Genetic Algorithm (GA) and Particle Swarm Optimization (PSO)—within a consistent problem setting. The framework employs both algorithms, which are independently assessed for their effectiveness in tackling the Linear Repetitive Project Time-Cost Trade-off (LRPTCT) problem. The methodology utilizes task decomposition alongside the Line of Balance (LOB) scheduling technique, facilitating a more …

Green Building Information Modeling Framework For Sustainable Residential Development In Egypt, Mohamed Ahmed Nabawy Dr., Ahmed Gouda Mohamed, Ahmed Osama Daoud Dr.

Civil Engineering

first_page Download PDF settings Order Article ReprintsOpen AccessArticle

Green Building Information Modeling Framework for Sustainable Residential Development in Egypt

by Mohamed Nabawy *, Ahmed Gouda Mohamed , Israa Awad and Ahmed Osama Daoud * Construction Engineering and Management Programme, Civil Engineering Department, Faculty of Engineering, The British University in Egypt (BUE), El Sherouk City, Cairo 11837, Egypt * Authors to whom correspondence should be addressed. Buildings 2025, 15(7), 1035; https://doi.org/10.3390/buildings15071035 Submission received: 20 January 2025 / Revised: 23 February 2025 / Accepted: 27 February 2025 / Published: 24 March 2025 (This article belongs to the Special Issue Building …

Synergizing Gis And Genetic Algorithms To Enhance Road Management And Fund Allocation With A Comprehensive Case Study Approach, Mohamed Nabawy

Civil Engineering

This study identifies a critical knowledge gap, revealing how the deterioration of roads, compounded by extensive usage and additional factors, poses significant risks to the road networks’ functionality. Without a robust fund allocation and prioritization strategy, the extent of this risk may be overlooked, adversely affecting the performance of essential infrastructure elements. Our research introduces an integrated decision-making model for existing road infrastructures to address this gap. This innovative approach combines a Geographic Information System (GIS)-based road management model with a fund allocation prioritization strategy, enhanced by an optimization engine via a genetic algorithm. The primary aim is to precisely …

Synergizing Gis And Genetic Algorithms To Enhance Road Management And Fund Allocation With A Comprehensive Case Study Approach, Mohamed Nabawy

Civil Engineering

This study identifies a critical knowledge gap, revealing how the deterioration of roads, compounded by extensive usage and additional factors, poses significant risks to the road networks’ functionality. Without a robust fund allocation and prioritization strategy, the extent of this risk may be overlooked, adversely affecting the performance of essential infrastructure elements. Our research introduces an integrated decision-making model for existing road infrastructures to address this gap. This innovative approach combines a Geographic Information System (GIS)-based road management model with a fund allocation prioritization strategy, enhanced by an optimization engine via a genetic algorithm. The primary aim is to precisely …

Synergizing Gis And Genetic Algorithms To Enhance Road Management And Fund Allocation With A Comprehensive Case Study Approach, Ahmed Gouda Mohamed

Civil Engineering

This study identifies a critical knowledge gap, revealing how the deterioration of roads, compounded by extensive usage and additional factors, poses significant risks to the road networks’ functionality. Without a robust fund allocation and prioritization strategy, the extent of this risk may be overlooked, adversely affecting the performance of essential infrastructure elements. Our research introduces an integrated decision-making model for existing road infrastructures to address this gap. This innovative approach combines a Geographic Information System (GIS)-based road management model with a fund allocation prioritization strategy, enhanced by an optimization engine via a genetic algorithm. The primary aim is to precisely …

Leveraging Machine Learning For Defect Detection In Irrigation Concrete Canal Lining In Egypt: Advancing Construction Quality And Efficiency, Mohamed Nabawy

Civil Engineering

Abstract:

Defects during the construction phase of projects pose significant challenges, particularly in terms of

safety, cost overruns, delays, and labor inefficiencies. In irrigation concrete canal lining construction

with mega investments, early detection of defects is critical to ensuring quality and project success.

This study explores the application of machine learning (ML) for onsite defect detection, focusing

on the development and deployment of an object detection mobile application specifically tailored

for identifying visible defects in concrete canal lining construction. Leveraging the machine learning

capabilities of Microsoft Azure, a custom object detection model was trained and validated to

recognize defects such …

Assessment Of Employee Risks In Construction Of Megahousing Projects Using Structural Equation Modeling, Mohamed Nabawy

Civil Engineering

One of the most crucial objectives for nations with dense populations worldwide is the construction of mega projects. Egypt's 2030 strategy emphasizes how crucial it is to build MHP in order to accommodate the country's enormous population growth. However, there has been a nighty eight percent delay in the completion of house construction projects due to employees' inadequate training, technology use, and uncertainty management. Enhancing the administrative, technical, and management skills of staff members can prevent delays in Egypt's delivery of sustainable MHP. The aim of this study is to develop an employee management model (ESEM) in order to assess …

Synergizing Bim And Value Engineering In The Construction Of Residential Projects: A Novel Integration Framework, Mohamed Nabawy

Civil Engineering

This study explores integrating Building Information Modeling (BIM) and Value Engineering (VE) to enhance cost management and project value optimization in residential construction. The primary aim is to develop a comprehensive framework that synergizes 5th Dimension Building Information Modeling (5D BIM) with VE processes to identify and evaluate the most cost-effective construction alternatives. Employing a mixed-methods approach, this research includes an extensive review of existing practices, an integrated BIM-VE framework proposal, and the application of 5D BIM principles to improve visualization, cost estimation, and scheduling. The findings reveal that integrating BIM and VE significantly enhances project efficiency, quality, and cost-effectiveness. …

A Hybrid Model For Assessing Safety Implementation And Project Success In The Construction Industry, Aya Hassan, Ali Hassan

Civil Engineering

Construction projects are prone to accidents and injuries, necessitating a focus on implementing safety programs. However, the implementation of such programs is influenced by various factors. Developing countries often have poor safety performance in their building sectors, with limited research in this area. This study aimed to identify essential safety program activities (SPAs) specific to the building sector. Through a literature review and survey, 25 SPAs were identified and validated via a pilot survey involving building sector experts. A questionnaire survey was conducted with 105 participants from the construction industry and academia. They were then categorized into four interconnected measurements …

Synergizing Bim And Value Engineering In The Construction Of Residential Projects: A Novel Integration Framework, Ahmed Gouda Mohamed, Mohamed Ahmed Nabawy Dr

Civil Engineering

This study explores integrating Building Information Modeling (BIM) and Value Engineering (VE) to enhance cost management and project value optimization in residential construction. The primary aim is to develop a comprehensive framework that synergizes 5th Dimension Building Information Modeling (5D BIM) with VE processes to identify and evaluate the most cost-effective construction alternatives. Employing a mixed-methods approach, this research includes an extensive review of existing practices, an integrated BIM-VE framework proposal, and the application of 5D BIM principles to improve visualization, cost estimation, and scheduling. The findings reveal that integrating BIM and VE significantly enhances project efficiency, quality, and cost-effectiveness. …

Integrating Building Information Modelling And Extended Reality In The Transportation Infrastructure Industry, Yosra El Maghraby, Shady Salem, Ahmed Alhady, Yasser Khodeir

Civil Engineering

No abstract provided.

Appraising Critical Success Factors In Sustainable Housing Projects: A Comparative Study Of Ppp Modalities In Saudi Arabia, Ahmed Gouda Mohamed

Civil Engineering

This study examines the critical success factors (CSFs) crucial for the effective deployment of public-private partnership (PPP) models in sustainable housing projects in the Kingdom of Saudi Arabia (KSA), underpinning the nation's Vision 2030. Through a robust methodology that incorporates a profound literature review, structured interviews, and a survey involving key stakeholders, the study prioritizes fourteen significant CSFs integral to PPP efficacy. Employing Analytical Hierarchy Process analysis, key outcomes underscore the paramount importance of technical aspects with an emphasis on sustainability, tailoring risk-sharing and allocation to encompass green technologies and eco-friendly practices, and economic stability in the light of long-term …

Evaluation Of Insurance Policies In The Saudi Arabian Construction Contracts, Ahmed Gouda Mohamed

Civil Engineering

The construction sector is more complicated and prone to risk than many other industries due to the size of the projects and the financial capital involved. Arranging insurance is the prudent course of action for risk management in the construction sector. There is a lack of clarity in insurance policies for public construction projects in the Kingdom of Saudi Arabia (KSA), which poses additional risks to all involved contracting parties. The aim of this research is to evaluate insurance policies in the KSA's public construction projects to identify the key deficiencies and obstacles and provide a road map for improvement …

Scrutinizing The Adoption Of Smart Contracts In The Mena Region’S Construction Industry, Ahmed Gouda Mohamed

Civil Engineering

The construction industry embodies a paramount role in the economic growth of various nations, including the Middle East and North Africa (MENA) region. Despite its significance, the industry faces construction disputes and payment issues, inducing financial losses and project postponements. Consequently, the construction industry has mutated smart contracts to enhance operational efficiency, which automates contract management tasks and offers perks, including transparency and efficiency. However, the adoption of smart contracts in the MENA construction sector remains limited, and the region lacks thorough research on this topic. This study addresses this gap by examining the level of cognizance and apprehension of …

Assessment Framework For Bim-Digital Twin Readiness In The Construction Industry, Aljawharah A. Alnaser, Ali Hassan Ali, Haytham H. Elmousalami, Ahmed Elyamany, Ahmed Gouda Mohamed

Civil Engineering

No abstract provided.

Assessment Framework For Bim-Digital Twin Readiness In The Construction Industry, Ahmed Gouda Mohamed

Civil Engineering

This study introduces a pioneering structural equation modeling (SEM)-based framework to assess BIM-DT adoption readiness in sustainable construction. The research’s approach delves into the intricate correlation between key success factors (KSFs) and sustainable parameters (SPs), fostering BIM-DT deployment. This interdisciplinary perspective provides a holistic understanding of the impact of KSFs on BIM-DT adoption. The research aims to identify KSFs and parameters, prioritize their relative weights for BIM-DT implementation, analyze KSFs and SPs correlations, and offer practical insights into the findings. The results revealed the importance of sustainability considerations in BIM-DT adoption, with cost optimization and resource management playing pivotal roles. …

A Bridge Information Modeling (Brim) Framework For Inspection And Maintenance Intervention In Reinforced Concrete Bridges, Ahmed Gouda Mohamed

Civil Engineering

first_page settings Order Article Reprints Open AccessArticle

A Bridge Information Modeling (BrIM) Framework for Inspection and Maintenance Intervention in Reinforced Concrete Bridges

Analysis Of Factors Affecting Construction And Demolition Waste Reduction In Egypt, Ayman Ahmed Ezzat Othman, Ahmed Osama Daoud, Obas John Ebohon, Ali Bayyati

Architectural Engineering

Construction projects are associated with construction and demolition waste (CDW) generated at different stages. In Egypt’s case, the CDW problem has become a significant challenge, and the need to find sustainable solutions is overwhelming. Based on recent investigations in the literature, it was found that six main factors are affecting CDW reduction (CDWR) as follows: (1) waste-efficient materials procurement measures; (2) waste-efficient materials procurement models; (3) green materials procurement approach; (4) legislation; (5) culture & behaviour; and (6) awareness. In this study, a representative sample of Egyptian construction firms was screened to (1) investigate the applicability and effectiveness of CDWR …

Risks Assessment In The Construction Of Infrastructure Projects Using Artificial Neural Networks, Mohamed Nabawy

Civil Engineering

Infrastructure Project (IP) construction in Egypt is saddled with copious risks emanating from the manque of risk knowledge, driving these projects to enigmatic failure concerning construction cost. The paper’s novel contribution is to acquaint with an Infrastructure Neural Risk Model (INRM) approach that colossally spotlights the substantial risk factors confronting Egypt’s IP construction apropos to Probability of Occurrence (POO) and Impact on Cost (IOC). Hundred and fifty-seven risk factors were compiled from the literature under three risk categories and reduced to 10, portraying the critical risk influencing the IP construction costs inconsolably. The paper’s main merits include identifying the puritanical …

Risks Assessment Using Structural Equation Modeling: Mega Housing Projects Construction In Egypt, Mohamed Nabawy

Civil Engineering

The Mega Housing Projects (MHP) construction in Egypt is saddled with numerous risks that emerged from the risk knowledge dearth, steering these projects to elusive failure apropos to completion time and construction cost. The research's novel contribution is a risk assessment Structural Equation Modeling (SEM) approach that spotlights the critical risk factors confronting MHP in Egypt concerning Probability of Occurrence (POO), Impact on Time (IOT), and Impact on Cost (IOC), from the contractors’ perspective. Forty-three risk factors were amassed from the literature and lessened to 25, delineating the significant risks impacting the MHP schedule and budget resentfully. The primary paper's …

Analyzing Resource Allocation And Levelling In Construction Projects, Mohamed Eizeldin, Mohamed Hussein Hegazy, Ahmed Alhady, Shahir Ashraf

Civil Engineering

Project scheduling has been crucial in any construction project since applying poor scheduling may lead to cost overruns and delays. The most commonly used technique for scheduling is the critical path method (CPM). As CPM neglects the availability of resources and assumes only time as a constrain; therefore, the resource allocation problem (RAP) technique is introduced. RAP appears when the number of resources required exceeds the number of resources available. Moreover, as a result of solving the RAP, another problem will occur known as the resource leveling problem (RLP). RLP lead to lots of hiring and firing of laborers. Researchers …

Causes Influencing Construction Waste Generation During The Design Process: An Analytical Study, Aya Saad, Ayman Ahmed Ezzat Othman

Architectural Engineering

Despite the social and economic contributions of the construction industry towards achieving sustainable development objectives, it has an adverse effect on the environment such as the generation of waste, water, and energy consumption. Construction waste (CW) is the loss of materials that are produced during or after the construction process and has no remaining value. Several countries promote waste elimination plans at early stages to reduce CW at its source. The Egyptian government is expanding its investments in new mega projects and infrastructure facilities like new administrative capital, bridges, roads, energy projects which resulted in increasing the rate and amount …

Achieving Sustainability Through Reducing Risks During Architecture Design Process: A Lean Management Perspective, Sherouk Abdelrehim, Ayman Ahmed Ezzat Othman

Architectural Engineering

The construction industry, as one of the largest industries in the world, plays a critical role in achieving national and international social and economic sustainable development goals. Socially, it is concerned with delivering long-term projects that turn client and end-user requirements into designs that specify technical aspects, functional specific requirements, and standards of quality. Economically, the construction industry contributes to a country's gross domestic product (GDP) by creating jobs and providing the country's infrastructure. the construction industry's nature is more vulnerable than other industries. This is believed to be due to the complex and dynamic nature of construction projects, as …

Overcoming The Limitations Of The Green Pyramid Rating System In The Egyptian Construction Industry: A Critical Analysis, Ahmed Osama Daoud, Ayman Ahmed Ezzat Othman, Obas John Ebohon, Ali Bayyati

Architectural Engineering

Despite the tangible contributions of the construction industry to social development and economic growth, it is known for its natural resources overconsumption and solid waste (SW) generation both of which have major negative impacts on the natural environment. In the particular case of materials waste, the construction industry worldwide accounts for about 50% of global annual generated SW. In addition, construction materials may contribute up to 50% of the total project cost. Accordingly, the negative implications of the construction industry have compelled many nations to develop green building rating systems in order to preserve the environment, promote the economic efficiency …

Causes And Impacts Of Site Accidents In The Egyptian Construction Industry, Mostafa Adel, Omar Elnawawy, Ayman Ahmed Ezzat Othman, Mohamed Badawy

Architectural Engineering

This paper aims to investigate the causes and impacts of site accidents in the Egyptian construction industry. To achieve this aim, a research methodology consisted of literature review and survey questionnaire was developed to accomplish three objectives. First, literature review was used to investigate the nature of the construction industry, identify and classify the causes of site accidents as well as their social and economic impacts on organizations and affected families. Second, a survey questionnaire was conducted with a representative sample of large and medium sized construction firms in Egypt to examine their perception of the causes of site accidents. …

Quantifying Materials Waste In The Egyptian Construction Industry: A Critical Analysis Of Rates And Factors, Ayman Ahmed Ezzat Othman, Ahmed Osama Daoud Dr., Obas John Ebohon, Ali Bayyati

Architectural Engineering

Construction and demolition waste (CDW) is a critical challenge facing the construction industry. It leads to deterioration of the triple bottom line of sustainability. Unfortunately, the CDW management research in Egypt lacks studies investigating (1) the variations in CDW generation (CDWG) among different types of construction projects, and (2) the factors affecting CDW reduction (CDWR). Based on a benchmarking approach, this research (1) quantifies CDW in terms of generation rates and costs among different construction project types in Egypt, and (2) investigates the relationship between CDWG and different adopted CDWR factors. Using structured interviews, a comparative case study was conducted …