Construction Engineering and Management Commons^™

Assessing The Equity Gap In Construction Education, Jared M. Burgoon, John Killingsworth, Jonathan W. Elliott, Molly M. Weisshaar

The Professional Constructor

There is a documented demand for an educated construction management workforce. To help meet this demand, construction education programs at numerous post-secondary institutions have established objectives and goals to recruit, train, and graduate high-quality students; and, many of these programs are charged with providing educational opportunities to students who have been traditionally underserved in higher education (e.g., female, minority, first generation students, etc.). This study compared the enrollment and retention rates, interdepartmental migration patterns, and student satisfaction and graduation success outcomes of undergraduate students enrolled in a CM program at a public university as a means of identifying trends and …

Finding Patterns In Subsurface Using Bayesian Machine Learning Approach, Wang Hui

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Stochastic simulation approaches and uncertainty quantification are usually adopted for gaining insight into variability in soil stratigraphy configurations. Previous investigations at geotechnical site characterization and interpretation can be broadly categorized into geostatistics- and process-based methods. On the other hand, modern site exploration techniques provide high-quality, dense datasets in physical spaces with high resolution, either directly from sensors (for example, cone penetration testing data) or indirectly from geophysical inversion (such as seismic inversion, electromagnetic induction inversion, and ground penetrating radar). In this work, anisotropy and heterogeneity are considered as possible patterns that inherently exist in the observations, and these are inferred …

Bs News March/April

Building Services Engineering

No abstract provided.

A Life-Cycle Analysis Of The Thermal Energy Transfer In Prototypical Air Force Office Building Construction Using Best Value Insulation Standards, Michael E. Canfield

Theses and Dissertations

The United States Department of Defense (DoD) possesses over 560,000 buildings and structures around the world which require electricity to maintain and operate. The energy costs associated with the operations of these building is approximately $4 billion per year. Sustainable infrastructure management is a crucial opportunity to improve and establish a prudent, manageable, and successful DoD budget. This research identified, modeled, and simulated thermal energy-efficient standards in building construction in order to recognize the best value standards as opportunities for potential cost savings. EnergyPlus and OpenStudio Building Performance Simulation (BPS) software was used to model the energy flow into and …

An Analysis Of The Viability Of 3d-Printed Construction As An Alternative To Conventional Construction Methods In The Expeditionary Environment, Jeneé A. Jagoda

Theses and Dissertations

Conventional construction is believed by some to have reached its technological limit of performance, making it increasingly difficult for conventional construction methods to meet the U.S. military’s core standards of quality, cost, and timeliness in the expeditionary environment. While still in its infancy, 3D-printed construction has the potential to revolutionize the way the military performs construction in deployed environments. This research conducts a systematic review of the viability of 3D-printed construction to investigate whether or not it is now or could be a viable replacement for conventional construction methods, specifically in remote environments where conventional construction capability may be limited. …

Analysis Of Construction Management At Risk Projects For Unites States Air Force Applicability, Danielle K. Tabb

Theses and Dissertations

Construction management at risk is a project delivery method that sees widespread use in the private and public non-federal construction sectors. There is interest in the federal government of using a project delivery method such as construction management at risk. However, guiding regulations prohibit the federal government from using it as it is utilized in the private sector. This research analyzes private sector use of construction management at risk through a literature review and Delphi Panel, in order to determine its effects on project performance. The Delphi Panel consisted of two rounds of questions; the experts were selected through a …

Predicting The Prevalence Of Autonomous Heavy Equipment In The Construction Industry, Mitchell T. Bongi

Construction Management

Autonomy is a topic that is gaining speed throughout the world as labor shortages rise, wages increase the desire for greater safety in dangerous fields accelerates. One industry that has had a slower start but looks to join the autonomous bandwagon is construction. Different experts in different fields from engineers to construction managers give different timelines as to when this autonomous technology will be normally present in certain construction industries, however an accurate timeline has yet to be determined. The objective of this paper is to provide a more accurate timeline as to when autonomous heavy equipment will be prevalent …

Development Of A Quality Control Method And Guidelines For Hot Mix Asphalt Using Recycled Concrete Aggregate, Xiaojun Li, Dingxin Cheng, Kun Zhang, Kanwar M. S. Jakhar, Uday V. Pericherla

Mineta Transportation Institute

Each year, about 122 million tons of aggregates, a major structural component of pavement, are used in asphaltic mixtures in pavement construction. At the same time, aging U.S. infrastructure produces around 200 million tons of demolition waste each year, half of which is concrete debris. Therefore, introducing recycled concrete aggregate (RCA) as hot mix asphalt (HMA) aggregate could not only relieve the disposal pressure but also result in considerable reductions in cost, energy usage, and greenhouse gas emissions in the paving industry. A limited number of studies regarding the use of RCA to substitute virgin aggregate in HMA (RCA-HMA) exist. …

Integration Of Plangrid Into Cal Poly's Construction Management Curriculum: Learn By Doing, Dane M. Clemensen

Construction Management

PlanGrid is a mobile construction management, document control software that gives builders real-time access to blueprints, punch lists, daily reports, submittals, RFIs and more. It is used throughout the industry by many different construction companies. The purpose of this project is to give Cal Poly construction management students early exposure to PlanGrid in an introduction lab in the jobsite construction class, CM 413. Before the lab was taught, a brief survey was sent out to construction companies asking their thoughts on how much exposure CM students should receive in PlanGrid. After receiving the survey results, the PlanGrid introduction lab was …

Integration Of Bim Management Into Custom Residential Construction, Cruz Calderhead

Construction Management

The custom residential sector of construction currently lacks the usage of BIM management tools. This paper looks to research the current usage, advantages, and disadvantages of using BIM management software’s within custom residential construction. There will be a comparative case study held between two custom residential contractors, one with minor BIM usage and one who has fully integrated BIM software into their management procedure. The goal is to find out if BIM management is cost-effective and scalable to the custom residential industry. This information will be beneficial to the custom residential industry because it will provide custom residential general contractors …

Hydronic Service Valve Product Development, Mark Hunsaker

Construction Management

Since the inception of modern mechanical and HVAC systems, maintenance and repairs have been prevalent in both contracting and facility operations. The average life of HVAC equipment is fractional compared to the life of buildings as construction technologies improve. Traditionally, the serviceability of heating and cooling equipment has entailed the significant amounts of labor and materials to disruptively drain or freeze hydronic systems in order to cut in means of bypassing the main system, swapping out equipment, or repair. The intent of this project is to explore alternative methods to forgo the aforementioned negative impacts of service and to improve …

Cal Poly Associated General Contractors Service- Learning Project In San Ignacio, Belize, Will A. Myers

Construction Management

In the winter of 2020, the Cal Poly Associated general Contractors chapter of San Luis Obispo built over 200 linear feet of soccer seating for the community of Selena, just outside of San Ignacio, Belize. Our team fundraised over $18,000 and designed a soccer stadium that would leave a lasting impact on the community. Throughout all phases of the project, we were challenged with many obstacles that tested our ability to overcome and handle difficult situations.

Belize Service Learning: A Case Study In Construction Technology Abroad, Parker H. Doshier

Construction Management

In Winter of 2019, members of the Associated General Contractors, Student Chapter at Cal Poly traveled to Selena, Belize to complete soccer bleachers at the local soccer field. This trip offered an excellent case study into feasibility and benefits of new construction technology on all project sizes and in different countries. SketchUp was used in multiple phases of this project including design, estimating and the creation of as-builts. Procore offers an array of useful features including the scheduling, daily logs and meetings that were used on this project. The scheduling feature was useful in tracking travel deadlines and for monitoring …

A Case Study On The Financial Implications Of The Zero Net Energy (Zne) Goal In California, Shane A. Willingham

Construction Management

This paper is a case study that identifies potential financial implications from the updated Title 24, Part 6 code requirements established in 2019 by the California Energy Commission (CEC). The CEC works closely with the California Public Utilities Commission (CPUC), who’s long term goal is to make all residential structures Zero Net Energy (ZNE) throughout the state. The CEC’s updated code requirements include mandatory measures for detached residential homes to meet Zero Net Electricity on an Energy Design Rating (EDR) basis, a step towards Zero Net Energy. The purpose of this study is to understand the additional construction costs associated …

Housing And Community Development Project In Siem Reap, Cambodia, Gerald F. Charette Iii

Construction Management

Habitat for Humanity Global Village is an international organization that gathers materials and volunteers to build homes for less fortunate villages in more than 70 different countries. The team I applied for was chosen to build a house for a family of four in a village near Siem Reap, Cambodia. I chose this as my senior project because it combines my interests in construction and humanitarian work, as well as giving me the opportunity to expand my knowledge of a different country’s construction means and methods. I felt that that the best way to showcase the material that I have …

Neca Ghana Project, Michael T. Klee

Construction Management

Cal Poly’s motto is, “Learn by Doing" and for Cal Poly’s NECA Chapter, this isn’t simply a motto, but a directive for proactive change. For my senior project I will be leading the Cal Poly NECA chapter in the design, pre- fabrication and construction of a 5-7kw solar array, community center, ice production room and technology room in the remote fishing village of Agbokpa, Ghana. The solar array will power multiple industrial DC freezers, high efficiency LED lighting and charging stations while additionally powering water filtration and irrigation systems. Like many other fishing villages around the world, Agbokpa has no …

Increasing Health And Safety Through The Utilization Of 4d Modeling, Rogan J. Wells

Construction Management

Health and safety is one of the most important aspects of the construction industry. Every year there are thousands of work-related injuries in the construction industry. Avoiding these injuries is of the utmost importance on a jobsite. This paper will analyze how building information modeling, specifically the use of 4D building information modeling, can be utilized to increase the overall health and safety of construction jobsite. An exploratory survey was conducted amongst architecture, engineering, and construction industry professionals who hold a wide range of experience. The aim of this survey was to analyze their knowledge and experiences using building information …

Construction Curriculum Developed For Continuation Schools, Orlando I. Yepez

Construction Management

This paper will discuss a curriculum, an introduction to construction fundamentals, that was built for continuation schools. A continuation school is a school for at-risk youth in which it provides programs of empowering, inspiration and outlet. Five modules were created that focus on different sections of the construction industry. These modules consist of Site Safety, Untroduction to Basic Math, Introduction to Power Tools, Introduction to Construction Drawings, and Basic Employable Skills. Each module will consist of a ten-question quiz and presentation. Two homework assignments were also created. One homework assignment for site safety which requires students to identify if the …

Analyzing More Sustainable Alternatives Than Using Ordinary Portland Cement In Commerical Construction, Brandon A. Sturla Bs

Construction Management

The purpose of this paper is to look at more sustainable alternative options for concrete use for California Commercial Contractors. This paper will analyze the more sustainable options for concrete and come to conclusions on how effective the alternative options are for protecting the environment, encouraging sustainability, maintaining cost effectiveness, and maintaining efficiency in building. This paper provides data on the negative impact concrete use has had on the environment and potential ways to alleviate this. This paper will also analyze how cost-effective the alternative options are to see if the alternative options are realistic and affordable to use in …

Prefabrication And The Labor Shortage On The Central Coast, Brenden Ryan Napier

Construction Management

The labor shortage has affected every aspect of construction all over California, however the central coast has been hit especially hard. The central coast’s location between the two major developmental hubs presents challenges such as relocating employees and finding skilled craftsman. One potential method that has been shown to increase productivity and cut costs is to prefabricate. Prefabrication can improve working conditions and increase worker safety while streamlining schedule and reducing environmental impact. While these benefits are certainly possible in larger cities that have the manufacturing grunt, this paper aims to understand if prefabrication is a viable way to alleviate …

Wireless Underground Communications In Sewer And Stormwater Overflow Monitoring: Radio Waves Through Soil And Asphalt Medium, Usman Raza, Abdul Salam

Computer Information Technology Faculty Publications

Storm drains and sanitary sewers are prone to backups and overflows due to extra amount wastewater entering the pipes. To prevent that, it is imperative to efficiently monitor the urban underground infrastructure. The combination of sensors system and wireless underground communication system can be used to realize urban underground IoT applications, e.g., storm water and wastewater overflow monitoring systems. The aim of this article is to establish a feasibility of the use of wireless underground communications techniques, and wave propagation through the subsurface soil and asphalt layers, in an underground pavement system for storm water and sewer overflow monitoring application. …

Construction Labor Productivity Modeling And Use Of Neural Networks: A Bibliometric Survey, Shalaka Hire, Sayali Sandbhor

Library Philosophy and Practice (e-journal)

Productivity of a project has a major impact on its cost and profitability. In spite of construction being labor intensive field with labor cost adding up to 30% to 50% of overall project cost, the productivity of labor is one of the least studied areas in the construction industry. It requires to be given due attention to the issues affecting labor productivity and design solution using soft computing techniques to improve the overall performance of the industry. This research paper aims to conduct a bibliographic survey of the literature available in the domain of Labor Productivity (LP) as well as …

A New Materials And Design Approach For Roads, Bridges, Pavement, And Concrete, Alan Fuchs, Tathagata Acharya, Luis Cabrales, Jesse Bergkamp, Nyakundi Michieka

Mineta Transportation Institute

Increased understanding of demand for transport energy and how to improve road pavement materials would enable decision makers to make environmental, financial, and other positive changes in future planning and design of roads, bridges, and other important transportation structures. This research comprises three studies focused on pavement materials and a fourth study that examines energy demand within the road transportation sector. These studies are as follows:

1. A techno-economic study of ground tire rubber as an asphalt modifier;

2. A computational fluid dynamics analysis comparing the urban heat island effect of two different pavement materials – asphalt and Portland Cement …

Reducing Nox Emissions Of Cargo Handling Equipment (Che) With Humid Air Systems, Hamid Rahai, Jeremy Bonifacio

Mineta Transportation Institute

The authors designed and tested a humid air system (HAS) for reducing NOx emissions of an LPG-powered forklift. The HAS uses distilled water and heat from the exhaust to generate steam that is injected into the intake air of the engine to increase humidity and thus achieve NOx reduction. Field tests with HAS have shown 2.2 ppm of NOx reduction with each percent increase in humidity of the intake air. A provisional patent based on the developed system has been filed.

Performance Evaluation Of Lightweight Normal And Geopolymer Foamed Concrete Using Palm Oil Fuel Ash As Partial Replacement Of Binder, M .E. Alnahhal Ahmed

Student Works (2020-2029)

Carbon dioxide (CO2) emissions from Ordinary Portland Cement (OPC) have a detrimental effect on the environment and this had led many researchers to search for other alternatives in the form of sustainable cementitious materials. The depletion of natural resources and dumping the industrial by-products and waste materials are serious concern to our environment. This research focusses on the performance of using a palm oil industrial by-product, namely, palm oil fuel ash (POFA), as a partial replacement for OPC and fly ash (FA) in lightweight normal foamed concrete and lightweight geopolymer foamed concrete, respectively. Thus, using 10, 20, and 30% POFA …

Challenges Of International Development Projects In Yemen: Perspective Of Public Work Project, Mohammed Lashuel Hassan Mohammed

Student Works (2020-2029)

International development projects are public projects that are created to support the economy and people’s life needs, mostly these types of projects target developing countries. These types of projects face challenges more than other projects due to many reasons. Accordingly, this research aims to explore the challenges that face international development projects in Yemen and conducted by the Public Work Project and highlight the most significant issues that face ID project as well to overcome these challenges. This research adopted the qualitative method by conducting ten semi-structured interviews with the PWP team and others stakeholders. The interview technique was selected …

Why Are Residential Property Developers In Ireland Not Using Bim?, Bim Tudublin, Simon Burke

Capstone Reports

The aim of this paper is to establish the level of BIM adoption by larger-scale residential property developers in Ireland and investigate the benefits and challenges of implementing BIM for residential housing. While BIM is a relatively new concept in Ireland for housing, developers and investors in larger scale developments are beginning to recognize areas where BIM can add value to their projects. The research also indicates that while there is evidence of successful BIM implementation for housing resulting in savings in cost and time, widespread adoption is hindered by a lack of knowledge and skills, costs of implementation, lack …

Steel Model Approval: Can Bim Provide A Drawing-Free Approval Process?, Bim Tudublin, David Reynolds

Capstone Reports

Despite widespread use of Building Information Modelling (BIM) software used within their industry, the approval of steelwork contractor’s design information is largely based on the approval of 2d-drawings. These workflows can be modernised to take advantage of current technology and provide productivity gains, but barriers to change exist. This research is an attempt to answer the research question of if a model-based approval process, which removes the need for drawings, is achievable. To answer this question, a mixed methodology was used. A literature review was performed to understand how the approval process works, what information is required and what BIM …

A Comparative Study Of Cadworx Plant 2018 And Revit 2020 With Ez-Iso Add-In, For The Production Of Piping Isometrics, Bim Tudublin, Killian Lynch

Capstone Reports

BIM software evaluation and selection is a complex process. In this paper, a comparative study of Revit 2020 with Ez-ISO add-in, and CADWorx Plant 2018, was carried out. The aim of this study was to determine if a MEP contractor could consolidate software usage into one package, thereby reducing costs for pipework modelling and isometric production. A comprehensive evaluation was developed based on a literature review. A multicriteria decision-making method was used in conjunction with the software evaluation to ensure sound choices were made. An online survey of senior BIM professionals was conducted to validate the analysis and findings. The …

A Critical Appraisal Of Findings And Solutions To Overcome Erroneous Bim Model Production And Information Delivery Workflows, Bim Tudublin, Ryan Forde

Capstone Reports

There are many varying definitions of Building Information Modelling, all of which reflect its transformative capabilities and impact on the construction sector. BIM is an emerging technological and procedural shift within the AEC industry (Succar, 2009). BIM is not just a technological change, but also a procedural and workflow change (Charles Eastman, 2018). Despite the growth of BIM adoption and increasing levels of maturity regarding BIM standards, numerous issues still arise at a micro level during project execution. BIM invokes the need for workflows, frameworks and processes that imparts knowledge, heightens trust, increases efficiency and consistency while reducing fragmentation and …