Construction Engineering and Management Commons^™

Application Of The Iec Technical Specification For Assessment Of Wave Energy Resource: A Case Study From The West Coast Of Ireland, Iulia Anton, Stephen Nash

Civil Engineering Research in Ireland 2020

There is significant interest globally in harnessing our ocean wave energy resource, estimated at approximately 30,000 TWh/year. The key to this is understanding the resource. The International Electrotechnical Commission (IEC) has developed a technical specification for the evaluation of wave energy resource, IEC-TS 62600- 101: Wave energy resource assessment and characterization. This research applies the IEC standard for a resource characterization study of the Atlantic Marine Energy Test Site on the west coast of Ireland. A key focus is the comparison of the detailed IEC validation approach using scatter diagrams with the traditional timeseries validation approach. Coarse (0.005°) and fine …

A Review Of Vision Based Methods For Pothole Detection And Road Profile Analysis, Darragh Lydon, Su Taylor, Myra Lydon, Julia Early

Civil Engineering Research in Ireland 2020

This paper is an overview of the development and application of Computer Vision for the detection of pothole, pavement distress and road profile analysis and categorisation. A brief explanation of the traditional methods for determining these factors is given, followed by a chronological description of the evolution and the challenges of using Computer Vision (CV) approaches to determine these conditions. The paper is separated into sections aligned to image capture and analysis methodologies. Qualitative evaluations and comparison of these methods have been provided along with the proposal of guidelines for new computer vision-based road analysis systems.

Analysis And Optimisation Of Tii’S Pams Reset Values And Deterioration Models For Irish Pavement Conditions, James Quinn, Raymond Mcgowan, Tomas O'Flaherty

Civil Engineering Research in Ireland 2020

Ireland has a national road network of approximately 5300km that is managed by Transport Infrastructure Ireland (TII). TII create yearly pavement maintenance and renewal programs from the operation of a Pavement Asset Management System (PAMS). Accurate pavement deterioration models and reset values are an essential part of PAMS and are required for life cycle cost analysis (LCCA). Pavement maintenance and renewal schemes are prioritised based on the LCCA's largest benefit to cost ratio, and therefore optimise the annual pavement maintenance and renewal budget. Currently, TII implement pavement deterioration models and reset values from Austria's and Belgium's PAMS, and are not …

Winter Maintenance On The Irish Road Network, Hugh Mcconnell, Brian Mccann

Civil Engineering Research in Ireland 2020

Winter maintenance relates to those activities undertaken where the objective is to minimise the impact of frost, ice or snow on the travelling public. The responsibility for winter maintenance of all roads in Ireland currently rests with local authorities and Transport Infrastructure Ireland (TII) (Formerly the NRA) on behalf of the Department of Transport, Tourism and Sport (DTTaS), (DTTaS, 2017). The aim of the study was to examine current winter maintenance practices undertaken in Ireland by local authorities and the Motorway Maintenance and Renewals Contracts (MMaRC) contractors and examine the potential financial, operational and environmental benefits if pre-wet and brine …

A Review Of Vision Based Methods For Pothole Detection And Road Profile Analysis, Darragh Lydon, S. E. Taylor, Myra Lydon, Julia Early

Civil Engineering Research in Ireland 2020

This paper is an overview of the development and application of Computer Vision for the detection of pothole, pavement distress and road profile analysis and categorisation. A brief explanation of the traditional methods for determining these factors is given, followed by a chronological description of the evolution and the challenges of using Computer Vision (CV) approaches to determine these conditions. The paper is separated into sections aligned to image capture and analysis methodologies. Qualitative evaluations and comparison of these methods have been provided along with the proposal of guidelines for new computer vision-based road analysis systems.

Winter Maintenance On The Irish Road Network, Hugh Mcconnell, Brian Mccann

Civil Engineering Research in Ireland 2020

Winter maintenance relates to those activities undertaken where the objective is to minimise the impact of frost, ice or snow on the travelling public. The responsibility for winter maintenance of all roads in Ireland currently rests with local authorities and Transport Infrastructure Ireland (TII) (Formerly the NRA) on behalf of the Department of Transport, Tourism and Sport (DTTaS), (DTTaS, 2017). The aim of the study was to examine current winter maintenance practices undertaken in Ireland by local authorities and the Motorway Maintenance and Renewals Contracts (MMaRC) contractors and examine the potential financial, operational and environmental benefits if pre-wet and brine …

Modelling The Thermal Behaviour Of A Precast Pcm Enhanced Concrete Cladding Panel, Dervilla Niall, Roger P. West, Oliver Kinnane, Richard Hegarty

Civil Engineering Research in Ireland 2020

According to the World Business Council for Sustainable Development there is currently a stock of more than 80 million buildings in Europe built between 1950 and 1975, a period during which energy performance was not considered in building design. To enable governments to comply with the European Directive 2010/31/EU on the energy performance of buildings, strategies are required to improve the energy efficiency of these buildings. Using the mass of a building to store or dissipate heat can reduce the demand on the auxiliary heating and/or cooling systems and hence reduce the overall energy demand of the building.

Previous research …

Analysis And Design Of A Novel Heavy-Duty Precast Element, Daniel Naughton, Michael Naughton, Michael O'Sullivan, Suhaib Salawdeh

Civil Engineering Research in Ireland 2020

Window sills are common to most buildings. In Ireland, concrete is the most popular material used for external sills. A standard one-metre concrete window sill weighs about 70kg. While external window sills are required to have sufficient capacity to resist damage during transportation and loading, they are non-structural elements. Therefore, there is no need for their high selfweight. This project looks to redesign concrete window sills to make them lighter. Decreasing the amount of concrete used in each sill would significantly reduce their self-weight. This would make concrete window sills more manageable in terms of transportation and installation. Two design …

Development And Localisation Of Ultra High Performance Concrete Using A Particle Packing Model, William Wilson, Tomas O'Flaherty

Civil Engineering Research in Ireland 2020

Ultra-high performance fibre reinforced concrete (UHPFRC) is used worldwide to improve the structural performance of infrastructure such as bridges, extend their working life and reduce environmental impact. As a result thinner structures are constructed leading to reductions in the structure’s self-weight and the volume of concrete and natural raw aggregates used in their construction. A drawback to UHPFRC is that it results in a significant rise in initial costs over normal and even high performance concretes, and it has very high binder contents, which in some cases is greater than 1100kg/m³. Therefore, the cost-efficiency and sustainability of this …

Composite Behaviour Of Wide Sandwich Panels With High Performance Concrete Thin Wythes With And Without Thermomass Shear Connectors, Jagoda Lipczynska, Roger P. West, Michael Grimes, Dervilla Niall, Oliver Kinnane, Richard Hegarty

Civil Engineering Research in Ireland 2020

To partly address the future sustainability of energy use in buildings, there is a program in Europe to retrofit domestic and commercial buildings with non-load bearing insulated re-cladding and over-cladding panels. Recent research work has shown that limited composite action is possible depending on the type of non-conductive shear connector and the stiffness of the insulation between the inner and outer wythes. This paper reports on the mix design development to develop high strength 20mm thick wythes and the manufacture of sandwich panels with five silicone-bonded layers of XPS insulation, making up a panel which is 220mm thick. These model …

Feasibility And Implications Of The Modular Construction Approach For Rapid Post-Disaster Recovery, Jin Choi, Pedram Ghannad, Yong-Cheol Lee

Civil and Environmental Engineering and Construction Faculty Research

The adverse social and financial impacts of catastrophic disasters are increasing as population centers grow. In recent years, destroying homes and infrastructures has resulted in a major loss of life and created countless refugees. For example, Hurricane Katrina in August 2005 damaged over 214,700 homes in New Orleans and forced over 800,000 citizens to live outside of their homes due to flooding. After disastrous events, the government agencies have to respond to post-disaster housing issues quickly and efficiently and provide sufficient resources for temporary housing for short-term disaster relief and reconstruction of destroyed and damaged housing for full rehabilitation. Modular …

Feasibility And Implications Of The Modular Construction Approach For Rapid Post-Disaster Recovery, Jin Choi, Pedram Ghannad, Yong-Cheol Lee

Civil and Environmental Engineering and Construction Faculty Research

The adverse social and financial impacts of catastrophic disasters are increasing as population centers grow. In recent years, destroying homes and infrastructures has resulted in a major loss of life and created countless refugees. For example, Hurricane Katrina in August 2005 damaged over 214,700 homes in New Orleans and forced over 800,000 citizens to live outside of their homes due to flooding. After disastrous events, the government agencies have to respond to post-disaster housing issues quickly and efficiently and provide sufficient resources for temporary housing for short-term disaster relief and reconstruction of destroyed and damaged housing for full rehabilitation. Modular …

Study The Effect Of Damping Change During The Dynamic Analysis Of A Reinforced Concrete Bridge With Neoprene Cushions, Mais Ghassoun

Emirates Journal for Engineering Research

The damping ratio has a important effect on the dynamic behavior of the bridges. and it is customary when designing to assume it as a predetermined fixed value independent of the response amplitude and frequency of the structure . A lot of experimental research worked on identifying them, but the dependence of damping and other dynamic characteristics of vibration amplitudes and their impact on responses and the results of the analysis need more scrutiny and simulation due to the difficulty of conducting vibration experiments for structures of realistic dimensions and large weights such as a RC bridge, which necessitated a …

Future Trends In Construction Waste Management, Zaur Zeynalov

International Programs

The problem of construction waste has been with us since the beginning of construction history. As the world's population continues to grow, construction waste grows with it and there is a pressing need to address how we deal with the construction waste problem As a result, the whole world is facing the problem of "construction waste management" today. This poster describes current challenges managing construction waste and offers possible solutions to minimize/mitigate/ameliorate its (negative) effects on the environment.

Improving Energy Efficiency In Residential Houses In Kosovo, Fatlum Rexhepi

International Programs

Buildings with poor insulation and infiltration in doors, windows, and other openings have very high heating and cooling demands. Due to lack of maintenance, building materials, and standard they are whopping consumers. The necessity to save energy is enormous, especially with newly environmental constrains. Moreover, this would not only save our natural resources, but it would cut large sums that households spend on electricity, gas, or coal. Thermodynamic calculation of heat gain and loss gave us a lucid picture of benefits respecting nearly zero energy buildings standards while comparing same building prior and after improving its envelope. The consumption after …

Data Quality And Reliability Assessment Of Wearable Emg And Imu Sensor For Construction Activity Recognition, Srikanth Sagar Bangaru, Chao Wang, Fereydoun Aghazadeh

Faculty Publications

The workforce shortage is one of the significant problems in the construction industry. To overcome the challenges due to workforce shortage, various researchers have proposed wearable sensor-based systems in the area of construction safety and health. Although sensors provide rich and detailed information, not all sensors can be used for construction applications. This study evaluates the data quality and reliability of forearm electromyography (EMG) and inertial measurement unit (IMU) of armband sensors for construction activity classification. To achieve the proposed objective, the forearm EMG and IMU data collected from eight participants while performing construction activities such as screwing, wrenching, lifting, …

Wind Uplifting Performance Of Roof-To-Wall Connections And Roof Structures With Elastomeric Adhesives In Light-Frame Wood Buildings, Bilal M. Alhawamdeh

Dissertations

Light-frame wood residential buildings are highly susceptible to damage caused by severe wind events such as hurricanes and tornados. Roof failures in residential buildings are commonly observed due to weaknesses of or missing connections. Roof-to-wall connections not only have significant influences on roof performance but also affect building resistance due to their critical role of transferring wind loads to the wall system and ultimately to the foundation. Roof fails when it has no sufficient wind uplift resistance due to improper selection or installation of construction materials (including fasteners) and strength degradation due to aging or long service. Toenailing is commonly …

Quantitative Analysis Of The Impacts Of Out-Of-Sequence Work On Project Performance, Michael W. Ibrahim, Awad S. Hanna, Jeffrey S. Russell, Ibrahim S. Abotaleb, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Although out-of-sequence work (OOS) is often cited as a recurring challenge that impacts project performance, it has not been fully addressed in the existing literature as a standalone topic. This paper addresses this gap, defining OOS work as an activity or series of activities that was not performed according to baseline planned logical productive sequencing. By developing a project-based survey and contacting 300 professionals, extensive data were gathered from 42 projects. Using these data, the impacts of OOS were examined. It was found that, on average, approximately 15% of project activities are performed as OOS, resulting in 33% growth in …

Performance Testing Of Hot Mix Asphalt Containing Biochar, Shadi Saadeh, Yazan Al-Zubi, Basel Zaatarah

Mineta Transportation Institute

In recent years, researchers have been able to identify asphalt binder additives, such as polymers and bio-binder, that can enhance the rheological and mechanical properties of asphalt binders. Earlier studies show that utilizing bio-binder as a partial replacement for asphalt binder has shown promising results in both mechanical and sustainability aspects. Biochar additions improved binder viscosity and low-temperature characteristics. Biochar, which is a byproduct of producing bio-binder, has shown enhanced rheological and mechanical properties when used as an additive to the asphalt binder. In this study, the mechanical properties of asphalt mixtures containing Biochar were investigated. In addition, its color …

Entrepreneurial Based Project: Minority Owned Guardrail Installation Company, Nicholas Rubio

Construction Management

This company will provide commercial and highway guardrail installation services to the Northern California Region. The organization will retain a Minority Owned Business Certification and will operate under a Class C-32 License for Parking and Highway Improvement. Due to the large backlog of guardrail projects and the lack of qualified contractors in Northern California, the company plans to partner with existing firms that are unable to take on work. After firmly establishing ourselves in the private commercial market, the organization plans to migrate to public road work where the Minority Owned title can provide more benefit. Through this process we …

Examining The Effects Of Reducing The Cement Content Of Portland Cement Concrete Pavement, Bryan Casillas

Graduate Theses and Dissertations

Portland cement is a significant component in a concrete mixture. For concrete used in portland cement concrete pavement (PCCP), the Arkansas Department of Transportation (ARDOT) specifies a minimum cementitious material content of 564 lb/yd3 and a maximum water-cementitious material ratio of 0.45. Prior research conducted at the University of Arkansas, TRC 0603, indicated concrete mixtures used in five bridge decks throughout Arkansas achieved the required 28-day strength at seven days, and the measured compressive strength at 28 days was 30% greater than required. The use of high strength concrete in pavements throughout the state can increase cracking and consequently reduce …

Quantifying Workability, Compactability, And Cohesion Gain Of Asphalt Emulsion Cold In-Place Recycling, Sadie Casillas

Graduate Theses and Dissertations

To maximize the life and quality of a pavement, proper maintenance and rehabilitation are essential. Strategies for pavement rehabilitation with many sustainable benefits are pavement recycling. This dissertation focuses on two types of in-situ pavement recycling: Cold in-place recycling (CIR) stabilized with asphalt emulsion and full depth reclamation (FDR) stabilized with asphalt emulsion or foamed asphalt. One white paper (Chapter 2), two accepted peer reviewed journal articles (Chapters 3 and 4), and one submitted peer reviewed journal article (Chapter 5) are presented in this document to create better understanding of the unique material characterization of asphalt emulsion cold recycled materials, …

Verifying The Calcium Oxychloride Threshold In Cementitious Pastes, Fatoumata Traore

Graduate Theses and Dissertations

Calcium oxychloride (CAOXY) formation is a serious deterioration mechanism known to cause joint damage in concrete pavements. CAOXY is the product of a chemical reaction between calcium chloride (CaCl2) or magnesium chloride (MgCl) deicing salts and calcium hydroxide in the cementitious matrix. Currently, the accepted CAOXY threshold at which deterioration is mitigated in cementitious paste is 15 g/100 g paste (15 oz/100 oz paste); however, this limit was developed using flexural strength testing. For this investigation, the current threshold was evaluated using compressive strength and mass change over time in paste specimens exposed to CaCl2. Fly ash is used to …

Improving Client-Consultant-Contractor Communication In Construction Industry Through Whatsapp Application, Muhammad Hafizul Taib

Student Works (2020-2029)

A Smooth and effective communication is very important in construction industry to prevent iteration and rework which will cause money. Since there are a lot of parties involve in construction,it is important to have a good communication platform. In the current world, people are using the technology advancement to enhance the effectiveness of communication amongst people who work in construction industry. Though there are a lot of mobile application designed for construction purpose, WhatsApp is the most commonly used by all. However, there are no studies done to identify the effectiveness of it. This thesis will gather respond from client, …

Challenges In E-Tendering Implementation In Ministry Of Youth And Sports Malaysia, Azis Ahmad Zamie

Student Works (2020-2029)

The Ministry of Youth and Sport, like most ministries in Malaysia, tenders its projects through the traditional paper-based tendering process, which has many weaknesses, including bureaucracy and lack of transparency. In 2008, e-Tender was one of government incentive under e-Government application was introduced to replace manual tendering system in public agencies to systematic procurement which using internet as platform of transaction. Like any other transition project, implementation of e-tender in Ministry of Youth and Sport, is associated with several challenges. This research aims to explore the challenges facing the implementation of the e-tender system in the Ministry of Youth and …

The Study On The Use Of Project Success Framework Among Project Personnel, Suring Joshua

Student Works (2020-2029)

Projects, programs and portfolios are essential for human endeavors since time immemorial. However, project success rates in various sectors are dismal and not up to expectations. This research aims to investigate the use of a multilevel project success framework among project personnel in various sectors to identify essential success levels and criteria and determine any weaknesses and gaps for enhancing the framework. This is a qualitative study during which a conceptual framework was developed and tested with data gathered using a questionnaire survey with open-ended questions which was distributed to project personnel based on snowball sampling. A total of 52 …

Project Risk Management In Malaysian Oil And Gas Industry: Implementation By Epc Local Contractor, Che Rosli Zaim Aiman

Student Works (2020-2029)

The megaproject in Downstream Sector of Oil and Gas Industry only achieve 50% success rate which warrants attention by researchers. The Owners and Contractors are not fully aware on the full range of project risks and only few have demonstrated the knowledge and expertise in managing risk effectively. The common understanding had by the EPC Contractor is they are having the full flexibility and freedom in performing execution work by maximizing profit while still complying towards client’s requirement as the contract price has been fixed during award stage. However, there is a hidden risk which seldomly being placed attention by …

The Critical Success Factors Of Cloud Based Application Implementation In Construction Management, Sukiman Mohd Asfahani

Student Works (2020-2029)

Design and construction are information intensive activities, involving a great number of people collaborating to produce complex, one-off developments. Whilst historically, information may have been managed and communicated using paper-based systems and verbal instructions, the integration of the supply chain, the introduction of computer aided design (CAD) and building information modelling (BIM) and the development of cloud computing application means that information communications technology (ICT) is becoming a fundamental part, not just of the design office, but also of the construction site. Cloud computing is a relatively new phenomenon in the construction industry. It allows the delivery over the 'cloud' …

Engineering Properties And Microstructural Characteristics Of Cement And Geopolymer Based Mortars Using Nontraditional Supplementary Cementitious Materials, Mathialagan Sumesh

Student Works (2020-2029)

The concrete repair and rehabilitation industry grows rapidly due to deterioration, damage and defects in concrete structures. For various reasons, the concrete construction industry is not sustainable; because it consumes huge quantities of virgin materials, the usage of Portland cement as prime binder. The production of cement is a major contributor to greenhouse gas emissions. In addition, the high cost of commercial repair material. Therefore, it is necessary to develop cost-effective alternative repair materials for concrete repairs. There have been many standard repair materials available in the market, which are costly and not affordable to common people. However, research works …

Comparing The Effectiveness Of Osha-10 Online And In-Person Safety Courses: Case Study, Timothy R. Bartolomei

Construction Management

Since 1970, the Occupational Safety and Health Act (OSHA) was designed to create a safe workplace for everyone, has increased safety awareness, and decreased occurrences of injury and death on construction-related job sites. Until 2001, construction safety education was taught through face-to-face interaction between an instructor and an employee. However, in 2001, safety courses became available through multiple online platforms with the ability to be completed virtually. Online safety courses provide an alternative from face-to-face training and allow the employee to complete the training at their own pace. However, some research indicates that online safety courses are not as effective …