Construction Engineering and Management Commons^™

Comparison Of The Resistance Of Belitic Calcium Sulfoaluminate Cement And Portland Cement To Sulfate Attack And Sulfuric Acid, Rilye Dillard

Graduate Theses and Dissertations

Microbially induced corrosion (MIC) is a fairly common concrete deterioration mechanism with many negative effects. MIC is a complex chemical and biological process that occurs in sewage systems and is nearly impossible to replicate in a laboratory setting. For this study, sulfate and sulfuric acid attack on concrete were studied to mimic two stages of the MIC process. The ASTM C1012, Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution and a modified ASTM C1012 accelerated method were used to compare the sulfate resistance of belitic calcium sulfoaluminate (BCSA) cement, portland cement (PC), and PC-fly …

Development Of An Ultraviolet Absorbance Assay To Estimate Air Entrainer Dosing For Concrete Containing Fly Ash, James Spencer

Graduate Theses and Dissertations

Fly ash is a coal combustion byproduct that can be used as a supplementary cementitious material (SCM) in concrete, offering benefits such as increased workability, durability, and strength. Fly ash can be used as a partial replacement to cement, reducing concrete productions costs and decreasing disposal in landfills. However, variability of fly ash properties (e.g., carbon content, adsorption site density) confounds estimates of the air entraining admixture (AEA) dose needed to achieve a specified air content in concrete. Air entrainment is needed to improve freeze-thaw resistance and limit concrete cracking. The foam index (FI) test is currently used to estimate …

Meta-Network Analysis Of Complex Construction Systems: Improving Project Efficiency Using Novel Computer-Based Analytic Methodology, Ethan Cummiskey

Honors Scholar Theses

The objective of this study is to build upon the framework of a meta-network approach to assessing vulnerabilities in construction projects. By viewing these complex environments as configurations of various nodes and links, it is possible to show the relationship between each entity in the project and the overall completion that is achieved from these connections. To expand upon previous studies, the vulnerabilities measured from this approach will be used to optimize the current network to eliminate any shortcoming in the project model. By investigating the congruence of different agents on the project, resources and informational nodes can be supplied …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Aly Mousaad Aly, Faiaz Khaled

Faculty Publications

Large-eddy simulation (LES) has proven to offer superior accuracy in regards to predicting surface pressures compared to the Reynolds-averaged Navier Stokes (RANS) models. However, the primary impediment is the high computational cost associated with LES. The authors attempt to investigate the computational cost and accuracy by employing different sub-grid scale (SGS) models in LES and hybrid RANS-LES models. One of the prerequisites of accurate pressure estimations is to ensure a horizontally homogeneous empty computational domain. This study aims to compare the computational competence qualitatively and quantitatively using an empty domain in regards to the ability to maintain horizontal homogeneity. The …

On The Computational Efficiency Of Les And Hybrid Rans-Les Models In Building Aerodynamics, Faiaz Khaled, Aly Mousaad Aly

Faculty Publications

No abstract provided.

Cm Member Of Slocoe Peace Conference Center Feasibility Study, Jackson Reynolds

Construction Management

This paper describes the parking design and estimate portion of a whole feasibility study conducted by an interdisciplinary team. The interdisciplinary team consisted of three senior undergraduate industrial engineering students, and one senior undergraduate construction management student. This feasibility study was conducted for the San Luis Obispo County Office of Education (SLOCOE) to determine if it is feasible to construct a new, 400-person conference center on a site in San Luis Obispo, CA. The complete study includes analyses of the following topics: economic, utilities, traffic/road, approval from Chumash Tribe, social/historical, climate, geological, vegetation and wildlife, noise and pollution, parking, mandatory …

Market Analysis Of Virtual Estimating For Reconstruction, William Robert Spencer

Construction Management

Reconstruction is the sector of construction that focuses on fixing fire, mold, and water damage to properties. Typically these are covered by insurance companies and the cost of these are determined through an insurance estimate using Xactimate. These insurance estimates are typically performed through visiting the site a few times by both the insurance company and the reconstruction company. Each of them will typically put together an estimate based on normal photos and then compare the estimates and then pay out the homeowner. This paper will examine the market interest in California for using virtual tours and expert insurance estimators …

Journeyman International: Canopy Life School, Housing & Training Complex In Kenya, Spencer P. Mishky

Construction Management

The purpose of this project was to provide a master plan for a primary school complex in a rural village in Migori County, Kenya. This facility aims to eliminate any issues for students growing up in the area. The master plan includes a primary school, housing accommodations, a training center, and a dining hall to cultivate success through all stages of these children’s lives. The project is headed by a non-profit organization, Journeyman International in conjunction with Canopy Life International and Take Heart Africa. The project was interdisciplinary involving a construction manager, an architect, and two architectural engineers all working …

International Sustainability Trends In Construction And Potential Applications In The American Market, Dante De Mayo

Construction Management

The construction industry evolves everyday as it attempts to stay up to date on current technologies, meet the needs of consumers, and take action on the ever-pressing topic of sustainability. Sustainability is one of the main ways the industry continues to advance. The United States is one of the world leaders in sustainable construction, however with limited research and restrained interest there is only so much progress that can be made when solely relying on domestic resources. By studying and collaborating with foreign construction institutions, the American construction industry has the potential to improve its sustainability performance significantly. By performing …

Building Services Engineering May/June 2021

Building Services Engineering

No abstract provided.

Medical Service Facility Site Development, Sabrina Carvajal

Honors Theses

This report provides a clear description of a site development design project for a future medical service facility. The site is approximately 46,818 square feet and is located at 203 E. Centre Avenue Portage, Michigan 49002 United States. This is in a high traffic area that is surrounded by different public and academic institutions including Portage Central High School and Portage Public Library. The commercial buildings surrounding this area are Comerica Bank, Dairy Queen and a new Senior Center currently under construction. Our team is proposing two different site-layout options for the future development of this building. This medical service …

Building Our Future: Positive Steps Forward For Apprenticeship Education And Training In Ireland, Roisin Murphy Dr

Level 3

The construction labour market has undergone a period of considerable turbulence resulting from economic cyclicality over the last decade. While some facets of the labour market have recovered in line with economic growth, there remain challenges in attracting new apprentices. The issue is particularly pronounced for certain “wet trades”; namely bricklaying, floor and wall tiling, painting and decorating and plastering.

A mixed method research strategy was employed for the purpose of determining labour market trends for these trades, comprising of employer and apprentice surveys in addition to semi-structured interviews. Findings from the research uncover not only a shift …

Study Of Fragility Functions For Assessing Damage To Water Pipe Networks Caused By Earthquake Loading, Dylan Joseph Merlo

Master's Theses

The performance of water lifelines during seismic events is an area of ongoing research. In this study we evaluate eight (8) different seismic events and the impact that ground shaking and ground deformations had on water pipeline systems. The overall goal of this work is to provide municipalities and utility providers with tools for mitigating the consequences of seismic hazards on water lifeline systems by analyzing the accuracy of damage estimation models. Three (3) different repair rate models are evaluated using data collected from the seismic events and compared to observed repair rate data. Results are analyzed to examine the …

Collective Risk Of Construction Development On Desert Tortoise Populations, Paulina Smith

Undergraduate Research Symposium Posters

Desert tortoises (Gopherus agassizii) are threatened, extremely territorial reptiles living on a rapidly-shrinking landscape. This literature review was conducted with the goal of determining whether the desert tortoises of the Mojave Desert are experiencing compounded effects from construction development which are not reflected in mortality/fecundity calculations in the current literature. Seventeen peer-reviewed sources were identified from the last 20 years which related to roads, railroads, wind-harvesting, solar energy, and man-made barriers/flood control centers in the Mojave. Current literature reveals that researchers do not have the time nor resources to pursue long-term studies on all of the possible effects on this …

An Experimental Study On Concrete’S Durability And Mechanical Characteristics Subjected To Different Curing Regimes, Edgar L.S. Borrero, Visar Farhangi, Kazem Jadidi, Moses Karakouzian

Civil and Environmental Engineering and Construction Faculty Research

Considering a constant demand in construction of concrete structures to develop novel approaches for predicting the concert’s properties, a host of investigations were performed on concrete’s mechanical properties and durability under various curing regimes. However, few studies were concerned with evaluating the concrete’s durability using non-destructive concrete surface resistivity tests by applying various curing conditions. The present study compares the influence of different curing regimes on durability and compressive strength of concrete to recommend the most effective curing conditions on concrete’s characteristics. Five curing conditions including ambient, laboratory, dry oven, wet oven and 7-days were analyzed. Accordingly, a non-destructive concrete …

Ultra-High Performance Concrete (Uhpc) Deck-To-Girder Connection For Accelerated Bridge Construction, Mostafa Abo El-Khier

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Precast concrete deck systems have been successfully used for Accelerated Bridge Construction. In most systems, special deck-to-girder connections are designed to achieve structurally composite sections. These connections require tight production/erection tolerances that complicate deck and girder fabrication and compromise the economics of these systems. This study presents a new precast concrete deck-to-girder connection that takes advantage of the excellent mechanical, workability, and durability properties of ultra-high performance concrete (UHPC) to simplify precast concrete deck and girder fabrication and erection. Typical girder shear reinforcement is terminated below the soffit of deck panels to eliminate any conflicts with deck reinforcement and relax …

Facilitating The Industrial Sector's Adoption Of Collaborative Project Delivery Methods, Xavier Wood-Aliberch

Durham School of Architectural Engineering and Construction: Dissertations, Theses, and Student Research

In an effort to improve outcomes in the civil and healthcare sectors, clients have adopted collaborative project delivery methods for the delivery of their capital projects. The success stories in these sectors have gathered the attention of clients in the industrial sector, where cost and schedule overruns have become the norm. The central objective of this thesis is to help clients make the transition to this new type of project delivery.

This thesis was written in a three-paper format, where each paper addresses a challenge with the adoption of collaborative delivery methods. The first paper investigates what type of industrial …

The Professional Constructor, Full Issue, Volume 46, Number 01

The Professional Constructor

No abstract provided.

Advanced Concrete Composites For Improved Performance: A Bibliometric Survey, Dhruv Patel, Aryan Tiwari, Nishnat Nikhare, Rohit Shinde, Ashutosh Dubey, Manan Shah, Shalaka Hire, Sayali Sandbhor

Library Philosophy and Practice (e-journal)

Concrete is the core component of any civil engineering construction. Conventional concrete can be modified depending upon the needs and requirements of the construction. Such concrete is called advanced concrete and this report aims to study advanced concrete and its composites. The main objective of this report is to perform a bibliographic survey on the latest research literature available under the domain of advanced concrete composites for improved performance. Timespan considered for the survey is from the year 2015 to 2020. The bibliographic survey consists of literature from online platforms such as the Web of Science (WoS) and Scopus database. …

Educational Theory-Embedded Training For Construction Industry Professionals, Hazem Jadallah

LSU Doctoral Dissertations

Workforce training is needed throughout the construction industry to create and maintain competent workers; unfortunately, most construction training and education research focuses on university student education. The focus of this dissertation research is the current state of educational-theory embedded construction workforce training, how such trainings are effective, and how they may be further optimized based on established educational theory. This is accomplished through a review of construction training for current industry professionals, an evaluation of the assessment criteria used to measure effectiveness, followed by the creation of a framework for construction training.

There is a lack of recommendations for improvement …

Mechanical Characteristics Of Cement Paste In The Presence Of Carbon Nanotubes And Silica Oxide Nanoparticles: An Experimental Study, Moses Karakouzian, Visar Farhangi, Marzieh R. Farani, Alireza Joshaghani, Mehdi Zadehmohamad, Mohammad Ahmadzadeh

Civil and Environmental Engineering and Construction Faculty Research

Considering the remarkable characteristics of nanomaterials, previous research studies investigated the effects of incorporating different types of these materials on improving the concrete properties. However, further studies are required to evaluate the complementary hybridization and synergistic influence of nanomaterials. In this research, the combined effect of adding nano silica particles (NS) and multi-walled carbon nanotubes (MWCNT) on enhancing both the compressive and flexural strengths of the cement paste was investigated. Moreover, the morphology of the interface between cement paste and aggregates was studied by scanning electron microscopy (SEM). The mixtures were prepared using three different portions of MWCNT and NS. …

Developing A Cost Of Delay (Cod) Framework For The Dod & Analyzing The Current State Of Air Force Agile Cost Estimation, James Goljan

Theses and Dissertations

The study has two research objectives. The first research objective develops a proof of concept for a Cost of Delay (CoD) framework to evaluate the Air Forces Kessel Run Software Factory. CoD provides a means to justify and prioritize competing interests regarding budgetary, manpower, and overall strategic decisions. DoD organizations can employ a cost minimization framework to conduct CoD Analysis. The results demonstrate Software Factories eschew trends in the literature towards more complicated cost models that incorporate machine learning with Data-Based techniques in lieu of simpler models that utilize Engineering Build-up Capacity Based techniques.

Applications Of Biomimicry In Construction And Architecture: A Bibliometric Analysis, Mugdha Praveen Kshirsagar Mrs, Sanjay Kantrao Kulkarni Dr, Ankush Kumar Meena Mr, Danby Caetano D’Costa Mr, Sushant Sunil Bhavsar Mr

Library Philosophy and Practice (e-journal)

Biomimicry can be considered to be a way of connecting the environment created by man to the natural world. Biomimicry is a science that, as a model, a measure and a tutor, looks to nature. Via site work, construction and everyday operations, biomimicry can be used to enhance the way the built environment is constructed. The main objective of this paper is to perform a bibliometric study of biomimicry-related literature in order to discover the growth of biomimicry as an architectural method in recent years. The time frame considered for this survey is between 1990 and 2020. The findings, however, …

Weather-Related Construction Delays In A Changing Climate: A Systematic State-Of-The-Art Review, Steven J. Schuldt, Matthew R. Nicholson, Yaquarri A. Adams Ii, Justin D. Delorit

Faculty Publications

Adverse weather delays forty-five percent of construction projects worldwide, costing project owners and contractors billions of dollars in additional expenses and lost revenue each year. Additionally, changes in climate are expected to increase the frequency and intensity of weather conditions that cause these construction delays. Researchers have investigated the effect of weather on several aspects of construction. Still, no previous study comprehensively (1) identifies and quantifies the risks weather imposes on construction projects, (2) categorizes modeling and simulation approaches developed, and (3) summarizes mitigation strategies and adaptation techniques to provide best management practices for the construction industry. This paper accomplishes …

A Hermeneutic Phenomenological Study Into The Impact Of Bim On The Social Dynamics Of The Aec Professional In The Workplace., Malachy Mathews Dr.

Doctoral

A review of the literature published surrounding new digital design and construction technologies and associated processes described within the Architecture, Engineering, and Construction (AEC) community as Building Information Modelling (BIM) or Virtual Design and Construction (VDC) reveals a gap in the theoretical understanding of the impact these technologies are having on professionals who work in this industry. The central aim of this research is to discover if there has been a shift in social dynamics as a result of the adoption of BIM in the workplace and, if there has been, to discuss the meaning of this for the industry …

How New, Innovative Technology Can Be Implemented To Combat The Construction Industry Labor Shortage, Noah David Jackson

The Professional Constructor

This essay addresses the construction industry’s need to compensate for the current and projected labor shortage through innovative technologies. In the first portion of this essay, three technologies that are most feasible for implementation – the Internet of Things (IoT), Drones, and Prefabrication – are detailed. The challenges faced are then discussed before the second major portion in which steps for implementation are outlined. These steps include forming partnerships, learning the process, communicating, training, implementing, and adapting and improving. The essay concludes with a discussion of how the AGC organization, and members within, can aid the industry in meeting this …

The Adaptative Construction Industry, Rhett Cox

The Professional Constructor

The construction industry is an industry that always unites to find ways to solve problems. It is very complex and requires considerable organization, hard work, specific skills, and a whole lot of determination. In this paper, I will discuss three ways that the industry is making strides to make construction better and more efficient: (a) increased use of modular construction and prefabrication, (b) use of drones, and (c) Building Information Modeling (BIM) use. With the construction process becoming more and more complex, improving efficiency and safety has gained more attraction, especially when coping with fundamental issues such as labor shortage, …

How New, Innovative Technology And Project Execution Tools And Techniques Can Be Used To Improve The Construction Process (Including Safety And Efficiency), James L. Craig

The Professional Constructor

Humanity has often sought to utilize tools and technology to make working faster, more efficient, more comfortable, and more accurate. While humans may have started with stone tools, we have since developed complex and sophisticated mechanical and digital technologies. The construction industry has been utilizing construction technology and equipment for these same reasons for generations. While other industries have embraced the use of smart, autonomous technology and robotics, the construction industry has steadily fallen behind in this effort. In this paper, I will discuss current work using these tools and possible applications for future development.

The Impact Of Climate Change On Building Energy Demands And Mitigation Measures In Florida, Aiyin (Erin) Jiang

The Professional Constructor

Tropical and subtropical parts of the world are projected to be the most vulnerable to the impact of climate change on building energy consumption demand. Few studies, however, focus on all four greenhouse emission scenarios defined by International Panel of Climate Change, which would be useful in assessing the energy demand challenges areas such as Florida. This study applies the most recognized climate change model downscaling approach, the morphing method, to investigate the impact of climate change on the commonly used commercial buildings in Florida’s climate zones under all four emission scenarios. It also analyzes the efficacy of various mitigation …

Frequency And Magnitude Of Cost Growth In Public Works Contracts, George Fulton, Panagiotis Mitropoulos

The Professional Constructor

Cost overruns are a persistent issue in the construction industry. This paper investigates factors that may drive cost growth on public works contracts. The study collected data on 1,043 public works projects completed over a three year period. The analysis examined the impact of four factors on cost overruns: (1) Project type, (2) Contract size, (3) Contract duration, and (4) Construction placement (value per day). The data were analyzed using a combination of basic descriptive statistics along with statistical hypothesis testing of means for various factors affecting cost growth. Cost growth was found to vary significantly by project type, contract …