Other Chemical Engineering Commons^™

Scale Model And Flow Visualization Of Jack Rabbit Ii Chlorine Field Test, Charlotte Williams

Chemical Engineering Undergraduate Honors Theses

The release of hazardous gases, especially accidental releases, can have a major impact on the surrounding environment and population. The history of accidental hazardous gas releases is filled with plant destruction, civilian injury, and even death. Knowledge of how these gases travel and disperse once released can significantly lessen physical harm and improve emergency procedures. The Jack Rabbit II field test was conducted in pursuit of this knowledge for a chlorine release. In this field test, a purpose-built chlorine tank was surrounded by CONEX trailers assembled in the desert in Utah to model an urban setting. Multiple releases of chlorine …

Plasma-Assisted Liquid Phase Epitaxy Of Gallium Nitride Using Molten Gallium., Daniel Felipe Jaramillo-Cabanzo

Electronic Theses and Dissertations

Next generation semiconductor materials such as Gallium Nitride (GaN) and Silicon Carbide (SiC) are rapidly replacing Silicon (Si) for high power and high frequency applications due to Si’s inherent limitations. Despite the advantages of GaN over SiC, adoption of GaN has been hindered due to the lack of a cost-effective bulk production technique. Thus, the inability to precure native substrates requires GaN-based architectures to be heteroepitaxially synthesized on non-native substrates, such as sapphire and even SiC. This research seeks to develop a cost effective and scalable method to produce low defect, bulk GaN encouraging the adoption of GaN based devices …

Nanogels And Microgels: From Model Colloids To Applications, Recent Developments, And Future Trends, Mattias Karg, Andrij Pich, Thomas Hellweg, Todd Hoare, L. Andrew Lyon, J. J. Crassous, Daisuke Suzuki, Rustam A. Gumerov, Stefanie Schneider, Igor I. Potemkin, Walter Richtering

Engineering Faculty Articles and Research

Nanogels and microgels are soft, deformable, and penetrable objects with an internal gel-like structure that is swollen by the dispersing solvent. Their softness and the potential to respond to external stimuli like temperature, pressure, pH, ionic strength, and different analytes make them interesting as soft model systems in fundamental research as well as for a broad range of applications, in particular in the field of biological applications. Recent tremendous developments in their synthesis open access to systems with complex architectures and compositions allowing for tailoring microgels with specific properties. At the same time state-of-the-art theoretical and simulation approaches offer deeper …

Iron-Containing Nanoparticles For The Treatment Of Chrionic Biofilm Infections In Cystic Fibrosis, Leisha M. A. Martin

Nanoscience and Microsystems ETDs

Cystic fibrosis (CF) is the most common genetic disease resulting in the morbidity and mortality of Caucasian children and adults worldwide. Due to a genetic mutation resulting in malfunction of the Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) protein, CF patients produce highly viscous mucus in their respiratory tract. This leads to impairment of the mucociliary clearance of inhaled microbes. In addition to reduced microbial clearance, anoxic environmental conditions in the lungs promote biofilm-mode growth of the pathogenic bacterial species Pseudomonas aeruginosa. Chronic infections of P. aeruginosa begin in early childhood and typically persist until respiratory failure and death result. The …

Hazard And Operability Analysis Of An Ethylene Oxide Production Plant, Samantha Ciricillo

Senior Theses

The purpose of this work was to evaluate potential hazards and failures as part of the design and economic analysis for a chemical plant that would produce 150,000 tons of ethylene oxide per year. The Hazard and Operability (HAZOP) method of analysis was used to accomplish this goal. This method of hazard analysis involves brainstorming potential errors in a system by examining each element of each process unit in full detail. This project was focused on the reactor unit because the reactor has several important parameters that could fail, resulting in safety issues within the system. Input for this analysis …

Improving The Distribution And Use Of Biogas By Conversion To Methanol, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

In this technology review, the process of turning an average biogas into methanol will be presented. The purpose is to find a better method of transporting the energy contained within biogas so that it may be used in industry as a value added product. The first step is removal of hydrogen sulfide, a corrosive chemical that can breakdown mechanical parts. The second step is carbon capture and conversion of the biogas into hydrogen. The final step is the hydrogenation of carbon dioxide into methanol using a copper catalyst and an alcohol co-catalyst.

Understanding Effects Of Engineering Outreach On Elementary Students, Thomas Cobb

Williams Honors College, Honors Research Projects

Currently, there is a desire to increase engineering understanding held by elementary students. As such, there needs to be a way to stimulate not only engineering, but other science, technology, engineering, and mathematics (STEM) topics in a young student’s lifestyle. One way to emphasize the importance of STEM while also showing how fun it can be is through different hands on activities led by individuals partaking in undergraduate studies or the industry. While having the students participate in the activities, it is important to understand what the students are learning and how the activity overall is viewed. With the help …

Improving The Delivered Specific Impulse Of Composite Rocket Propellant Through Alteration Of Chemical Composition: Methodology And Parameters For Characterization Of Propellant And Validation Of Simulation Software Common To The Amateur Rocketry Community, Isaac O'Brien, Austin Ryan

Williams Honors College, Honors Research Projects

In this study, two solid composite rocket propellants were designed utilizing ProPEP, a rocket propellant formulation software common in the amateur and hobby rocketry communities. The two propellants were designed to optimize specific impulse relative to a literature propellant designed by 1020 Research Labs. The literature propellant was also tested in order to validate the design of experiment as well as the mixing and testing procedures. All three propellants, which includes the literature propellant RCS-P, and the two novel propellants AKR-P1 and AKR-P2 were characterized with static tests. The results of the static tests provide data on propellant performance and …

Fluidized Bed Classroom Demonstration Unit, Theresa Chapa

Williams Honors College, Honors Research Projects

Fluid and Thermal Operations is a 4th year chemical engineering course at the University of Akron designed to introduce undergraduate students to the engineering and mathematical concepts behind the operation of a fluidized bed. The purpose of this honors project is to design and manufacture an inexpensive and portable unit that can be used in the classroom to visually demonstrate three functions of a fluidized bed to students. The fluidized bed is manufactured from items that can be purchased from a department or hardware store, is capable of being transported by a single person to and from a classroom and …

Using Fluorescence Spectroscopy To Determine Concentrations Of Quantum Dot Solutions, Cameron Sawyer

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Cataloging The Degree Of Sensitization Via Electrochemical Reactivation For Studying The Corrosion Behavior Of Inconel 718, Austenitic, And Duplex Stainless Steels, Bradley Lynes

Williams Honors College, Honors Research Projects

Corrosion resistant materials can be expensive, but usually reduce the life cycle cost of metallic assets. However, negligent sensitization of these materials can lead to aggressive, intergranular corrosion. Using the methodology of the double loop electrochemical potentiokinetic reactivation (DL-EPR), this project investigates different steel reinforced bars and Inconel to determine the degree of sensitization after a heat treatment of 900°C for 2 hours. The purpose of this research is to validate and determine the appropriate test parameters for performing further DL-EPR test in the future. Additionally, the kinetics observed for each sample during the DL-EPR test will be analyzed and …

Effects Of Hofmeister Ions On Transition Temperature Of Two Thermo-Responsive Polymers, Joshua Moser

Williams Honors College, Honors Research Projects

It was hypothesized that through the use of Hofmeister Ions, the lower critical solution temperature (LCST) of poly(vinyl methyl ether) (PVME) and poly(ethylene glycol)- poly(N-isopropylacrylamide) (PEG-b-pNIPAAm) block-copolymer could be controlled. Through literature searches and small lab experiments, our team found that there may be a connection between Hofmeister effects and phase transition of a thermo-responsive polymer. To try and prove this, the lab team decided to take four cations (Mg²⁺,Na⁺, Cs⁺, K⁺) in solution with the thermo-responsive polymers and compared their LCST to solutions of the thermo-responsive polymer in de-ionized …

Form Stable Phase-Change Materials, Russell Dent, Marjan Kashfipour, Nitin Mehra, Jiahua Zhu

Williams Honors College, Honors Research Projects

This work investigates the use of two different polyols, xylitol (Xyl) and erythritol (Ery), in conjunction with boron nitride (BN) aerogels, for the purpose of creating thermally conductive composites. While the BN filler in Xyl composites achieved a high anisotropic thermal conductivity of up to 4.53 W/m-K at 18.2 weight percent filler loading, they do not exhibit good phase-change material qualities due to a low solidification enthalpy even at low cooling rates. Alternatively, the BN-Ery composites have shown promising results with a solidification enthalpy of 225.14 J/g and a melting enthalpy of 385.84 J/g at a heat rate of 5 …

Prevention Of Harmful Algal Blooms By The Mitigation Of Phosphorus Nutrient Loading Via Filtration By Steel Wool And Activated Carbon, Ronald Simpson, Sara Kidd, Samantha Zidd

Williams Honors College, Honors Research Projects

Harmful Algal Blooms (HABs) are a devastating ecological and economic consequence of the abundance of nutrient-rich agricultural runoff entering aquatic ecosystems (Baker et al. 2014). Bio-available phosphorus from synthetic fertilizers is one of the major nutrients contributing to this global issue. Previous studies indicated that dissolved phosphorus can be removed from an aqueous environment when passed through a composite mixture of granular steel wool particles and activated carbon (Erickson, Gulliver, and Weiss, 2007). In this project, we conducted experiments using higher quality concentration measurements to determine what grades of steel wool (SW-0000, SW-000, SW-00) and types of activated carbon (granulated …

Towards Sustainable Production Of Chemicals And Fuels From The Fast Pyrolysis Of Waste Polyolefin Plastics, Ulises Gracida Alvarez

Dissertations, Master's Theses and Master's Reports

The increasing amount of plastic waste (PW) generation has become an important concern due to the leveled-off recycling rates. Therefore, governmental agencies around the world, including state governments in the United States, have proposed initiatives to minimize the amount of PW that is landfilled and encourage recycling or energy recovery. Circular economy is a strategy that attempts on reusing PW to produce new polymers while avoiding its disposal and the use of virgin material. Chemical recycling raises an interesting technology prospect due to the potential reduction of pollutant emissions and the establishment of a circular economy through the production of …

Novel Adsorbent For Industrial Wastewater Treatment Applications, Islam M. Al-Akraa, Ahmed Y. Zakaria Eng, Dalia A. Ali Eng, Hany A. Elazab Dr, Hoda A. Elsawy Dr

Chemical Engineering

In this study, the hydroxyapatite powder is investigated for both of methylene blue and thymol blue in aqueous solution. The physical and chemical properties of the adsorbent were evaluated systematically using the different techniques including Microsoft Excel programming, linear regression model and also the coefficient of determination. Batch adsorption experiments were conducted to determine the effect of contact time, solution pH, initial dye concentrations, and also the adsorbent dosage on adsorption. The adsorption kinetic parameters confirmed the better fitting of pseudo-second order kinetic model for both of methylene blue and thymol blue. The isotherm data of methylene blue and thymol …

Investigation Of The Synthesis And Optoelectronic Properties Of Ultrasmall Cdse Quantum Dots, Megan Webster

Dissertations and Theses

Traditional, or 1^st generation, solar cells have a theoretical upper limit of 33% power conversion efficiency based on the thermodynamic limitation of the single p-n junction cell design. This limitation is known as the Shockley-Queisser limit and methods to design solar cells to circumvent it have been creative, with a significant part of the field focused on quantum dot (QD) based systems. With theoretical efficiencies ranging between 44 and 67% for one sun concentration, QD solar cell designs are clearly superior to the limits of 1^st generation solar cells. However, maximum achieved efficiencies for QD-based designs are far …

Electrochemical Properties Of Crystalline Polymorphs Of Mno2 In Aluminum And Zinc Metal Batteries, Subhadip Pal

Dissertations and Theses

The widespread use of non-renewable fossil fuels has led to societal problems like global warming and climate change. Electrochemical energy storage can enable the integration of renewable energy sources that are inherently intermittent (solar, wind, etc.) into the electric grid, though major advances in cost, cycle life, and safety are necessary to have a global impact on the energy landscape. Both aluminium (Al) and zinc (Zn) metals are earth abundant, low-cost, safe, and exhibit high coulombic capacities, which make them promising electrode materials for “beyond lithium-ion” battery chemistries. However, the electrochemical feasibility and charge storage mechanisms of alternative Al and …

Designing Particle Tracking Software For A Theoretical Understanding Of Magnetic Janus Particle Aggregation, Thomas W. Long

Dissertations and Theses

Magnetic Janus particles are spherical colloids covered with a thin magnetic cap on one half of their surface. The asymmetric magnetic material gives the particles a magnetic dipole shifted away from the center of mass of the particle. The magnetic dipole either points perpendicular (axially-shifted FexOy caps) or parallel (radially-shifted (Co/Pd)x multilayered particles) to the shift vector. When a magnetic field is applied to a system of magnetic Janus particles, the particles aggregate into chains aligned with the magnetic field. The rate of aggregation is of theoretical and practical interest and the focus of the thesis.

Optically studying samples of …

Design Of Geothermal District Heating And Cooling System For The West Virginia University, Oluwasogo Bolaji Alonge

Graduate Theses, Dissertations, and Problem Reports (ETD)

Recent Appalachian Basin Geothermal Play Fairway Analysis estimated elevated heat flows in north-central West Virginia. This region provides an optimal and unique combination of elevated temperatures and flow necessary for geothermal development along with year-round surface demand for heating and cooling on the campus. Therefore, West Virginia University’s (WVU’s) Morgantown campus has been identified as a prime location in the eastern United States for the development of a geothermal direct-use heating and cooling application. The objective of this study was to perform a feasibility analysis for the development of a geothermal district heating and cooling (GDHC) system for WVU campus …

New Method Of Manufacturing Carbon Foam, Matthew D. Artimez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Carbon foam is a product that has some unique features. Carbon foam is a light weight material that has a high crush strength. It is electrically conductive, but because it is composed of air space between the tendrils, it is not a thermal conductor. Since it contains no volatile content, it is noncombustible. All these features allow carbon foam to have many modern applications. Currently, there are only three methods of producing carbon foam, and all three are not cost- efficient enough to meet the demand of potential new markets.

In this thesis, a new procedure of producing carbon foam …

Effect Of Aerogel On The Thermal Performance Of Corrugated Composite Sandwich Structures, Jacob Dillon Chess

Master's Theses

Current insulation solutions across multiple industries, especially the commercial sector, can be bulky and ineffective when considering their volume. Aerogels are excellent insulators, exhibiting low thermal conductivities and low densities with a porosity of around 95%. Such characteristics make aerogels effective in decreasing conductive heat transfer within a solid. These requirements are crucial for aerospace and spaceflight applications, where sensitive components exist among extreme temperature environments. When implemented into insulation applications, aerogel can perform better than existing technology while using less material, which limits the amount of volume allocated for insulation. The application of these materials into composites can result …

Low Temperature Desiccants In Atmospheric Water Generation., Sunil Gupta

Electronic Theses and Dissertations

Surging global water demand as well as changes to weather patterns and over exploitation of natural water sources, such as ground water, has made potable water a critical resource in many parts of the World already – one rapidly heading towards a crisis situation. Desalination has been adopted as a solution – this is however energy intensive and impractical for most of the developing countries - those most in need of water. A renewable source of energy is solar thermal and solar photovoltaic. A plentiful source of water is the humidity in the atmosphere. This research is to push the …

Nanoparticle Catalytic Enhancement Of Carbon Dioxide Reforming Of Methane For Hydrogen Production, Nicholas Groden

Doctoral Dissertations

The U.S. produces 5559.6 million metric tons of carbon dioxide annually, of which 21% is produced by industrial processes. Steam reforming, an industrial process that accounts for 95% of all hydrogen production in industry, produces 134.5 million metric tons of carbon dioxide or around 11% of the total carbon dioxide produced by industry. This carbon dioxide is then either emitted or goes through a sequestration process that accounts for 75% of the plant's operational costs. An alternative reaction to steam reforming is dry reforming, which utilizes carbon dioxide rather than emitting it and can be used in conjunction with current …

Development Of A Simple Lab-Scale Vacuum Assisted Resin Transfer Molding (Vartm) Process, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

The goal of the current study was to develop and demonstrate a simple and quick lab-scale VARTM process for the purpose of making flat panels for subsequent characterization, for example in new materials development efforts. This process was not intended to be optimized for final production, rather it served as the quickest way to make lab-scale composite panels using VARTM while maintaining all the salient features of typical VARTM processes used in larger scale manufacturing. There is a wide variety of ways to implement VARTM, as well as a diverse list of potential materials and supplies from which to choose. …

Suitability Of Active And Intelligent Packaging For Local And Organic Food – A Case Study In Southern Finland, Sara Paunonen, Marja Pitkänen, Mika Vähä-Nissi, Ville Leminen, Mika Kainusalmi

Journal of Applied Packaging Research

This study explores the suitability of innovative packaging for local and organic food. Attitudes and opinions in local and organic food chains in Southern Finland were collected via eighteen semi-structural interviews. The respondents were small-scale producers and processors of fish, meat, berries, and mushrooms, wholesalers, retailers, and institutional kitchens. The aim of this study was to understand factors promoting and preventing the penetration of innovative packaging solutions into the organic and local food market. A clear majority (89%) of respondents considered active and intelligent solutions to be equally suitable for local and organic food as for conventional food. However, less …

Sulfate Removal From Mine Impacted Waters, Tyler Shock

Chemical Engineering Undergraduate Honors Theses

Woo Pig Sulfate (WPS) has developed two methods for reducing levels of calcium sulfate in mine impacted waters, a “hot process” and a two-stage nanofiltration process. Both processes were designed to treat gypsum saturated water that is currently being pumped via interceptor wells to prevent the spread of a sulfate plume into a nearby community. Each solution was designed for Freeport McMoran’s Sierrita mine in Green Valley, Arizona, which was visited in order to gain insight about the problem. Below 250 ppm on the treated stream, nanofiltration and the hot process achieve overall recoveries of 84 and 99%, respectively. The …

Direct Potable Reuse Of Wastewater, Dakota Rusk, Molly Churchwell, Lauren Clark, Sabrina Castle, Boyce Bethel, Aaron Henry

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress. The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there are …

Direct Potable Reuse Of Wastewater, Aaron Henry, Molly Churchwell, Lauren Clark, Boyce Bethel, Dakota Rusk, Sabrina Castle

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.5 The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there are …

Direct Potable Reuse Of Wastewater, Lauren Clark

Chemical Engineering Undergraduate Honors Theses

Water is essential to our societies and mankind. Currently, 844 million people across the globe lack access to potable water. By 2025, it is projected that half of the world population will be in a region of water stress.⁵ The water crisis is often thought of as a problem limited to places that have always struggled to have clean water, but it is now affecting new areas such as the southwest United States. With increasing population demands and drought, the feasibility of direct potable reuse (DPR) of wastewater is being considered. According to an EPA report in 2017, there …