Other Chemical Engineering Commons^™

Optimization And Dynamic Control Of Acetone Production From Isopropyl Alcohol, Thomas W. Wasson

Honors Theses

This paper investigates the optimization and dynamic control of acetone production via catalytic dehydrogenation of isopropyl alcohol. Optimization was conducted using steady-state Aspen Plus modeling with product specifications of 30,000 metric tons per year of 99.9% pure acetone by weight. Dynamic modeling of the feed preparation and reaction portions of the process was conducted in Aspen Plus Dynamic. Through optimization efforts the primary economic factor, net present value (NPV), was increased from $(126.6) million to $(83.2) million, representing a $43.4 million increase. This was primarily accomplished through a switch to low temperature catalyst, optimization of reactor dimensions, pressurization of key …

Shooting For The Stars: Stem Outreach Strategies Between 2nd And 7th Grade, Paige Miller

Chemical Engineering Undergraduate Honors Theses

Engineering and planetary science outreach programs are increasingly important as industries and research organizations face growing demand for STEM professionals. Despite the importance of these fields, many students receive little exposure to engineering careers during their early educational experiences. This honors thesis examines the effectiveness of interactive STEM outreach presentations designed for elementary and middle school students. Specifically, this study evaluates outreach activities centered on chemical engineering applications and the NASA M2M CO₂ regeneration project for Martian environments.

Two student age groups participated in this study: 2nd grade students at Butterfield Elementary School and 7th grade students at Woodland Junior …

Performance Of Zirconia-Based Catalysts For Cold Plasma-Assisted Dry Methane Reforming, Levi Pile

Chemical Engineering Undergraduate Honors Theses

This study investigates the performance of zirconia-based catalysts in non-thermal plasma (NTP)–assisted dry methane reforming (DMR) for synthesis gas (syngas) production. This work explores an alternative pathway for converting carbon dioxide and methane into valuable products under milder conditions than conventional thermal processes. Experiments were conducted in a radiofrequency plasma reactor to evaluate the effects of plasma power, feed flow rate, and reactant ratios on conversion efficiency. The performance of plasma-only conditions was compared with packed-bed systems using zirconia catalysts. Results show that plasma-only systems achieved modest conversion rates (~16.5% for CH₄ and ~12.0% for CO₂), while …

Demonstration Of The Relationship Between Irwin Spire Quantity And Boundary Layer Depth In The Chemical Hazards Research Center Wind Tunnel, Jace D. Beckwith

Chemical Engineering Undergraduate Honors Theses

Atmospheric Dispersion Models (ADMs) are computer-based simulations used to model gas releases for enforcing regulatory compliance, designing facilities, and responding to emergencies. Because ADMs rely on complex mathematical models, they require experimental validation to ensure accuracy. Wind tunnels offer a controlled, repeatable method for gathering validation data. The Chemical Hazards Research Center (CHRC) at the University of Arkansas operates an ultra-low speed wind tunnel for this purpose. A key feature of this tunnel is its simulated Atmospheric Boundary Layer (ABL). The simulated ABL is a turbulent layer in which wind speed increases logarithmically with height from near zero at the …

Design Of Aluminum-Air Battery Systems And Optimization Of Cetyltrimethylammonium Bromide And 8-Hydroxyquinoline Additives In Alkaline Electrolytes, Steve Chen

Chemical Engineering Undergraduate Honors Theses

The first portion of this thesis focuses on the design and component optimization of aluminum-air batteries to power a car for the Chem-E-Car competition. A range of separators, cathodes, and current collectors was evaluated to determine the optimal configuration for maximizing output. The resulting system consisted of 1000 series aluminum as the anode, cellulose separators saturated in 1 M potassium hydroxide as the electrolyte, and composite PVDF and graphite as the cathode. The improved batteries achieved a power density of 2.14 x 10^-4 W/cm² and were utilized for the Chem-E-Car competition. The second portion of the thesis investigates …

Deep Learning Approaches For Voltammetric Analysis Of Coffee, Ryan Koes

Honors Theses

This thesis investigates deep learning approaches for voltammetric analysis of brewed coffee using a low-cost electrochemical system and screen-printed electrodes (SPEs). Traditional analytical methods, such as high-performance liquid chromatography (HPLC) and gas chromatography-mass spectrometry (GC-MS), provide precise quantification of key compounds but require expensive instrumentation and specialized expertise, limiting accessibility. While SPEs offer a more accessible alternative, they yielded poor results with traditional processing; however, when combined with a neural network, the system proved more effective. In experiments with 132 coffee samples, mean errors for caffeine, CGA, and TDS predictions were 52.98 ppm, 70.48 ppm, and 0.08%, respectively. These findings …

Microscopic Insights On Shear Rheology Of Polyampholyte Ionomers Via Molecular Simulations, Kyle Vonscio

Williams Honors College, Honors Research Projects

Ionomers are polymers that contain a small fraction of charged groups. The ionic attraction of charged groups allows ionomers to act similarly to crosslinked polymers. Depending on the strength of electrostatic interactions and structure of the ionomers, different dynamics and rheological responses can be observed. With moderate attraction between ions, these noncovalent crosslinks can be broken when heated, allowing ionomers to flow and show the strength of a crosslinked network at low temperatures. Nonequilibrium molecular dynamics (NEMD) simulations will be performed under shear in the xy-plane and the macroscopic rheology and conformation of the polyampholyte ionomer will be determined. The …

Determining Critical Micelle Concentrations Of Standard Surfactants And Rhamnolipids, Kathryn E. Kunz

Williams Honors College, Honors Research Projects

My proposed project will study the critical micelle concentration (CMC) of rhamnolipids using the pendant-drop and drop-weight methods. First, the critical micelle concentrations of ionic and nonionic common surfactants will be tested. Sodium Dodecyl Sulfate (SDS) will be used as an ionic surfactant and Tween 20 will be used as a nonionic surfactant. The critical micelle concentrations will be determined using the pendant-drop and drop-weight methods. The experimental results from the standard surfactants compared to their accepted values will be tested to assist with determining a more suitable approach. Completing the tests will provide a better understanding of critical micelle …

Effects Of Hofmeister Ions On Lower Critical Solution Temperatures Of Poly(N-Isopropylacrylamide) And Poly(Vinyl Methyl Ether), Joseph Joaquin

Williams Honors College, Honors Research Projects

The goal of this study is to compare how four different Hofmeister anions (Cl-, SCN-, F-, and I-) affect the Lower Critical Solution temperature (LCST) on two thermo-responsive polymers: poly(N-isopropylacrylamide) (pNIPAAM) and poly(vinyl methyl ether) (PVME). pNIPAAm is commonly used in the environmental applications such as monitoring, oil-water separations, or antifouling materials, and in medical industry from drug delivery to tissue engineering. When pNIPAAM or PVME reaches a temperature above their LCST, they become hydrophobic, and the polymer chains coiled, leading to their aqueous solutions turn opaque. PVME exhibits a similar LCST as that of pNIPAAM, so it can be …

Analysis Of Sessile Drop And Captive Bubble Contact Angle Measurements On Metallic And Hydrophobic Surfaces, Jack H. Darnell

Williams Honors College, Honors Research Projects

Contact angle measurements are widely used to characterize surface wettability and determine changes in surface energy, yet the choice of measurement technique can significantly influence the results. This study compares the sessile drop and captive bubble methods for measuring contact angles of sodium dodecyl sulfate (SDS) solutions on carbon steel, stainless steel, and a hydrophobic wafer. Additionally, the time‑dependent wetting behavior of water, SDS, polysorbate 20 (commercial name Tween 20), and rhamnolipids on a hydrophobic wafer was evaluated over a five‑minute period. Results show that the sessile drop method consistently produced higher contact angles than the captive bubble method on …

Effects Of Coupling Agents On An Epoxy Coating And Consequent Corrosion Resistance Of Carbon Steel, Breck A. Mooney

Williams Honors College, Honors Research Projects

This project will include the determination of how coupling agents affect corrosion resistance on select carbon steel when combined with a polymer coating. This research will explore 2 different silane coupling agents: 3-aminopropyltriethoxysilane (APTES) and 3-glycidoxypropyl-trimethoxysilane (GPTMS). 1 polymer coating, Bispenol A diglicidyl ether (BADGE), will be explored as well. These coatings will be applied to select carbon steels in various ratios to determine their effects on corrosion.

Computer-Aided Molecular Design To Identify More Environmentally Friendly Pfas, Melvin M. Keita

Williams Honors College, Honors Research Projects

The goal of this project is to inversely design alternatives to per- and polyfluoroalkyl substances (PFAS) using Computer-Aided Molecular Design (CAMD). PFAS, also described as “forever chemicals”, have been used in industry and consumer products since the 1940s. PFAS can be found in drinking water, food, food packaging, waste sites, and other sources. Exposure to different PFAS can lead to increased risks of some cancers, immune effects, and reproductive effects. Pulling from existing data, this project will use quantitative structure-property relationships (QSPRs) to design PFAS alternatives that possess optimal properties to prevent adsorption into drinking water and other potential sources …

Aqueous Iron Electrowinning: From Electrolyte Engineering To The Unexplored Potential Of Acetate Systems, Chodwell N. Verenga

Dissertations, Master's Theses and Master's Reports

Iron electrowinning and electrodeposition sit at the intersection of classical metallurgy and developing sustainable manufacturing. With the iron and steel industry responsible for 7 - 9% of global CO₂ emissions, low-temperature electrochemical pathways for iron production have garnered significant research interest. This review examines the fundamental electrochemical principles governing iron deposition, the thermodynamic constraints imposed by the iron-water system, and the kinetic challenges posed by the parasitic hydrogen evolution reaction (HER). The three key electrolyte systems are objectively evaluated: acidic sulfate and chloride electrolytes, alkaline suspension electrolytes and water-in-salt electrolytes. Their operating parameters, faradaic efficiencies, energy consumption and deposit characteristics …

Mechanical Fractionation Of Wheat Middlings For Application In Pyrolysis And Animal Feed, Okwudili I. Obiakor

Dissertations, Master's Theses and Master's Reports

Wheat middlings are grain byproducts that are underused for bioenergy production despite having a high lignocellulose content. Its use as a feedstock for catalytic pyrolysis depends on effective and sustainable fractionation to enhance efficiency and product yield. This study tested mechanical pre-fractionation (sieving and air classification) to reduce ash content of certain fractions to < 1% for catalytic pyrolysis and enrich nutrient levels of other fractions for feed applications. Wheat middlings were separated into 11 fractions using screen sizes from 106 µm to 1651 µm, and the composition of each fraction was characterized (ash, protein, structural carbohydrates, lignin, starch, and simple sugars). For cyclone separation, a full factorial design was used to study the effect of air velocity (15,18, 20 m/s) and feed rate (33, 35, 38 kg/h) on the amount of material collected in the underflow and overflow, and the composition of these fractions was characterized. Sieving showed a pronounced segregation of ash content, from 4.5% to 6.5% in wheat middlings fractions, with 5.7% being the lowest for coarse fractions which has higher lignocellulose content, and 4.5% in the fine fraction (150-212 µm). The same defined enrichment was observed in all nutrients except for protein. Starch enrichment zone were defined in the fine fractions (212 µm and below), for structural carbohydrates and lignin in the coarse fractions (600 µm and above), and for ash in coarse fractions (1180-1651 µm). In contrast, protein content was not significantly different between various fractions (p value=0.787). The fiber rich fraction (> 600 µm), suitable for pyrolysis, which have a composite ash value of 6.0% can be sorted and mixed with intermediate fractions to reduce ash to 5.3% and the remaining fractions rich in digestible nutrients used for animal feed formulation. Compared to sieving, cyclone separations did not …

Experimental Measurement Demonstration Of Initial And Steady-State Heights Of A Co2 Vertical Jet Fountain In Still Air, Brock Mcrae

Chemical Engineering Undergraduate Honors Theses

Atmospheric releases of heavier-than-air gases pose acute near-field hazards in low wind, yet the near-source behavior of vertical dense-gas jets in still air is sparsely documented. This thesis demonstrates a repeatable laboratory method for measuring the initial and steady-state rise heights of a carbon dioxide (CO₂) jet issued vertically from a floor nozzle in the CHRC ultra-low-speed wind tunnel under still-air conditions. Controlled mixtures (pure CO₂, 50/50 CO₂-air, 25/75 CO₂-air) were released at four flow rates (75, 100, 125, 150 LPM) with five repeats per condition. A fixed camera and tape-measure scale enabled video extraction of jet height using Kinovea …

A Contemporary Approach For Exploring The Influence Of Detoxification And Standardization Of Traditional Metallopharmaceutical Product Pharmacological And Toxicological Aspects, Malarvizhi K

Theses and Dissertations

Polyherbomineral formulation possess unique medicinal properties due to the presence of metals and minerals as integral part, as processed in addition to specific herbals. There is an increased interest in metallopharmaceuticals in clinical and research areas, because of their immense therapeutic efficiency towards multiple diseases and evidence for non-toxic claim. Sivanar Amirtham is one of the polyherbomineral Siddha medicine recommended for the treatment of various respiratory diseases and other ailments including antidote therapy for poisonous bites. The present research work attempted for standardization of Sivanar Amirtham preparation as per the traditional standard protocols (including the detoxification process of raw materials) …

Design And Investigation Of Deep Eutectic Solvent-Assisted Extractive Fermentation Of Biomolecules, Ramya M

Theses and Dissertations

The increasing demand for sustainable and efficient bioprocessing techniques has prompted the development of novel separation strategies integrating bioproduction with downstream processing. Extractive fermentation has emerged as a promising process intensification to overcome product inhibition and enhance productivity by constantly removing target biomolecules from the fermentation medium. Although the extractive fermentation of acids and alcohols has been extensively studied, less attention has been focused on green solvents and their compatibility, phase-forming abilities, and reactor configurations.

Therefore, advancing extractive fermentation technology necessitates comprehensive studies on solvent systems and the development of modified bioreactor configurations to aid future optimization. Initially, 22 DESs …

Improving Particle-Phase Nitrate Measurement In Pm2.5 Filter Sampling: Evaluation Of A Denuder–Nylon Filter Modification In The Spartan Network, Wenyu Liu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Accurate measurement of PM_2.5 composition is of global importance. Evaporation-induced mass loss introduces potential bias in filter-based PM_2.5 measurements, with ammonium nitrate volatilization from Teflon filters being a major contributor to negative mass artifacts. Previous studies have demonstrated that using an acid gas denuder in combination with nylon filters can help recover the nitrate mass. This study evaluates design modifications to the AirPhoton sampling station setup within the globally distributed Surface Particulate Matter Network (SPARTAN) incorporating an additional acid gas denuder upstream and a nylon filter downstream of the existing Teflon filter.

Two co-located AirPhoton Sampling stations were …

Simulation Of Photochemical Effects On Air Quality, Grace Li

Chemical Engineering Undergraduate Honors Theses

Nitrogen dioxide (NO₂) and ozone (O₃) are both EPA criteria air pollutants in the troposphere, largely generated by combustion and therefore present in significant concentrations in urban areas. Sunlight facilitates chemical reactions between pollutants and ambient air. Aerosols modulate the amount of available energy required to drive such photochemical reactions, ultimately impacting air quality. Simulating photolysis rates with FastJX software is a resource-efficient strategy to study how these aerosols can affect air quality.

Interfacial Phenomena Of Plastics: From Surface Modifications To Environmental Impacts, Kennedy Guillot

LSU Doctoral Dissertations

Plastic is a ubiquitous part of everyday life since its introduction in the previous century. Global production continues to exponentially increase, establishing plastics as one of the most dominant materials in modern manufacturing. Within the scope of academia, plastic is essential due to its low cost and sterility, particularly for minimizing contamination. Beyond the laboratory, plastic use spans numerous industries, and its use and disposal has since raised many environmental concerns. Once valued for its durability, plastics now pollute the environment in landfills and natural ecosystems. In recent decades, the consequences of this pollution have been investigated, yet the full …

Multifunctional Pvdf Ionogels With Magnetic Nanoparticles For Electroactive And Magnetic Actuation, Alfredo Carrillo Valverde

Chemical Engineering Undergraduate Honors Theses

The fast development of compact and multifunctional electronics has driven interest in smart materials capable of responding to multiple stimuli. Ionogels, polymers that have been swollen with ionic liquids (IL), offer several favorable electrochemical and thermal properties due to their intrinsic ion conductivity, wide electrochemical window, non-flammability, and high thermal stability. However, their poor mechanical properties (e.g., modulus and strength) limit their use in applications. In this work, multifunctional PVDF ionogel composites were made by blending magnetically responsive iron oxide nanoparticles (Fe₃O₄ MNPs) into the polymer matrix. The influence of MNP concentration (9-21 wt%) on composition, ionic …

Ultrafast Laser Surface Structuring For Wettability Control On Copper, Akshay Arvind Nagvenkar

All Theses

Wettability is a crucial surface property influencing various phenomena, including heat transfer, cell adhesion, and corrosion. Engineering devices can achieve superior performance by precisely manipulating surface wettability. As a result, extensive research has focused on developing surfaces that exhibit either extreme water attraction (superhydrophilic) or strong water repellency (superhydrophobic). Tailoring surface wettability paves the way for numerous applications, such as drag reduction in marine vessels, controlled drug delivery, efficient water collection, advanced liquid transport systems, oil-water separation, anti-corrosion coatings, friction reduction, and self-cleaning materials. Ultrafast laser surface structuring is a promising approach for engineering multifunctional surfaces, effectively modifying material properties …

Binary Solid/Liquid Equilibrium Of Mixtures Of Thermally Robust Salts And Molecular Compounds For Use As Heat Transfer Fluids, Jared Ridge Mathews

Honors Theses

Fossil fuels, contributors to climate change that may bear catastrophic consequences, power the entire world. The human species is almost entirely dependent on fossil fuels for energy, but other sources of renewable and environmentally friendly energy must be developed. Concentrated solar power (CSP) is a promising source of renewable energy with hampered potential—better heat transfer fluids (HTFs) are needed for it to be economically feasible. Currently, the HTFs in industrial use are predominantly either synthetic oils or nitrate-based molten salts. Synthetic oils are only stable up to 400 °C, and molten salts often have high melting temperatures, making them prone …

The Augmentation Of A Solar Panel Lab For The Chemical Engineering Curriculum To Introduce Sustainability Principles, Lane A. Wilkins

Chemical Engineering Undergraduate Honors Theses

Photovoltaic solar cells are utilized in solar panels to convert sunlight into usable electricity. Since the energy derived from solar panels produces far less greenhouse gas than typical fuels such as coal and natural gas do, it is considered a clean source of energy and is vital to sustainability efforts. Sustainability is often defined by three pillars: environmental, social, and economical. Solar energy incorporates each of these pillars into its process, allowing it to be an effective tool to teach sustainability to students. A previously written lab that employs solar panels focused on the efficiency of converting light into electricity. …

Engaging Future Engineers: Utilizing Ai-Generated Video To Promote The Chemical Engineering Profession, Madeline G. Mondebello

Chemical Engineering Undergraduate Honors Theses

The expected incline of the chemical engineering profession faces a growing need to attract the next generation of prospective students. This research explores the use of artificial intelligence (AI) software to create an innovative form of media fit for secondary school and early college outreach. The pre- and post-video questionnaires were taken by a voluntary population comprised of high school students, college students, and parents. Overall, the feedback received was generally positive but indicated that the AI avatars and the lip-sync discrepancies may disrupt the video more than enhance it. In the future, a larger population will be surveyed to …

Incorporating Recycled And Repurposed Plastic Into 100% Reclaimed Asphalt Pavement, Basant Bhatt

Graduate Theses and Dissertations (2019 - present)

The increasing awareness of sustainability in the asphalt industry has driven the use of recycled materials like reclaimed asphalt pavement (RAP) and waste plastic. This study examines the incorporation of recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), and recycled low-density polyethylene (rLDPE) at 0.3%, 0.6%, and 0.8% dosages into 100% RAP, along with the warm mix asphalt additive Evotherm® P25. Laboratory tests were conducted to evaluate the mechanical and durability performance of the modified asphalt mixtures while rutting and fatigue life were evaluated using mechanistic-empirical (ME) analysis in PerRoad software. Both plastic type and dosage had a statistically significant impact …

Evaluating The Potential For Reusing Process Waste Fiber, Elisha Ewing

Honors Theses

This study was born out of curiosity around the potential use of reject materials from the papermaking screening system for molded fiber product development. The team sought to explore the technical feasibility of this concept and develop a proposed design for mill implementation. The project supports the common papermaking objective of reducing fiber loss from the stock preparation process.

The project assessed first the technical feasibility through laboratory testing and trials. The team dedicated time to characterizing screen reject samples from local mills and running trials using the good fibers extracted from the samples. Molded fiber products were successfully created …

Rhamnolipid As An Effective Srb Biocide – Determining A Solution To Replicate Anticipated Conditions, Elizabeth Zimmerer

Williams Honors College, Honors Research Projects

This project aimed to develop a laboratory-scale solution that replicates produced water conditions (CO₂ + brine) found in crude pipelines, with the added requirement of promoting the growth of sulfate-reducing bacteria (SRB). A previously successful study was used as a reference, which employed a hybrid salt solution containing essential nutrients and environmental factors. The proposed solution included 10 g sodium chloride, 1 g sodium pyruvate, 0.2 g ammonium chloride, and 0.8 g sodium sulfate per liter of deionized water. Electrochemical testing (Linear Polarization Resistance and Electrochemical Impedance Spectroscopy) was performed on solutions with and without rhamnolipid. Results from the …

Effects Of Chain Length, Saturation, And Bases On Saponification, Sarah Fenik

Williams Honors College, Honors Research Projects

This project will analyze the effects of chain length and saturation of fatty acids on saponification processes, as well as the effects of the base used in the reaction. Stearic acid, lauric acid, and oleic acid will be used for the fatty acid comparisons, and sodium hydroxide and potassium hydroxide will be used for the base comparisons. Stearic acid is considered a long chain fatty acid, while lauric acid is considered a short chain fatty acid. Oleic acid is a monounsaturated fatty acid. Five soap products are be made: sodium stearate, sodium laurate, sodium oleate, potassium stearate, and potassium oleate. …

Corrosion Of Pipes In Soil Under Cathodic Protection, Ashley Chow

Williams Honors College, Honors Research Projects

This research project focuses on understanding how various soil properties affect the corrosion of buried pipelines that are protected by cathodic protection (CP) systems. Specifically, the study seeks to evaluate key soil characteristics, including resistivity, moisture content, and pH levels to determine their influence on the efficiency of CP systems in mitigating corrosion. Through controlled laboratory experiments, carbon steel specimens were exposed to a range of simulated soil conditions to mimic real-world environments. Corrosion rates were assessed using advanced electrochemical techniques, such as linear polarization resistance (LPR) and Tafel slopes, along with traditional mass loss methods. The primary objectives of …