Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Nanoscience and Nanotechnology (4)
- Catalysis and Reaction Engineering (3)
- Physical Sciences and Mathematics (3)
- Biochemical and Biomolecular Engineering (2)
- Chemistry (2)
-
- Civil and Environmental Engineering (2)
- Environmental Chemistry (2)
- Environmental Engineering (2)
- Physical Chemistry (2)
- Polymer Chemistry (2)
- Thermodynamics (2)
- Computer-Aided Engineering and Design (1)
- Environmental Sciences (1)
- Mechanical Engineering (1)
- Process Control and Systems (1)
- Sustainability (1)
- Transport Phenomena (1)
- Keyword
-
- Biodiesel (3)
- Transesterification (3)
- Adsorption (2)
- Castor oil (2)
- Optimization (2)
-
- Solid waste (2)
- : Water hyacinth (1)
- Biodiesel; glycerol-free; triacetin; process optimisation; Box–Behnken design; NetZero (1)
- Catalyst (1)
- Ceramic sludge; roller kiln waste; ceramic floor tiles; waste recycling (1)
- Ceramic sludge; roller kiln waste; sanitary ware; ceramic floor tiles; waste recycling (1)
- Ceramic tiles; ceramic waste recycling; kiln rollers; ceramic tiles standards (1)
- Ceramic wastes; Clay Bricks; Cullet (1)
- Circular economy (1)
- Co-electrodeposition; Fuel cells; Pt-Cu; Catalyst poisoning; Formic acid (1)
- Composition driving force (1)
- Ductile cast iron waste; Crystal violet removal; Response surface methodology; multi-mechanism physisorption; Circular economy; Industrial waste valorization (1)
- Dye removal (1)
- Equivalent composition (1)
- Fe3O4 (1)
- Gas plant Packed column Tray column ASPEN HYSYS Egypt (1)
- Graphical approach (1)
- Greenhouse Gas; CO2 Capture; Sustainable Adsorbent; Computational Fluid Dynamics; Chitosan (1)
- Heterogeneous catalysis (1)
- Hydro char and Anaerobic digestion (1)
- Hydrothermal (1)
- Iron filings (1)
- Low-temperature shift spent catalyst (1)
- Mass exchange networks (1)
- Mass integration (1)
Articles 1 - 22 of 22
Full-Text Articles in Other Chemical Engineering
Phosphate Removal By Spent Low Temperature Shift Catalyst Through Process Optimization And Mechanistic Study, Fatma A. Hashem Eng., Abeer M. Shoaib Prof., Walaa Omar Dr., Mai H. Roushdy
Phosphate Removal By Spent Low Temperature Shift Catalyst Through Process Optimization And Mechanistic Study, Fatma A. Hashem Eng., Abeer M. Shoaib Prof., Walaa Omar Dr., Mai H. Roushdy
Chemical Engineering
Natural water bodies become eutrophic due to phosphate pollution from industrial and agricultural sectors. This research addresses waste disposal and water pollution at the same time by recycling spent low-temperature shift catalyst (LTSSC) from the fertilizer industry as a sustainable phosphate adsorbent. High surface area (247±5 m2/g), mesoporous structure, and many metal oxide sites (CuO 49%, ZnO 32.2%, and Al2O₃ 13.9%) were shown by characterization using XRF, XRD, BET, SEM–EDX, FTIR, particle size analysis, and zeta potential. Under optimum conditions (contact time 1.64 h, dose 5 g/L, initial concentration 9.58 mg/L, stirring 278 rpm), Response Surface Methodology optimization achieved 92.95±2.8% …
Valorization Of Ductile Cast Iron Solid Waste As A High-Performance Adsorbent For Crystal Violet Removal: Characterization, Optimization, And Mechanistic Insights, Ibrahim Ibrahim Mr., Abdel Mohsen Turky Dr., Nasser Mostafa Prof., Mai H. Roushdy
Valorization Of Ductile Cast Iron Solid Waste As A High-Performance Adsorbent For Crystal Violet Removal: Characterization, Optimization, And Mechanistic Insights, Ibrahim Ibrahim Mr., Abdel Mohsen Turky Dr., Nasser Mostafa Prof., Mai H. Roushdy
Chemical Engineering
Industrial textile wastewater containing synthetic dyes cause serious environmental and health risk, whereas ductile cast iron (DCI) foundries generate over 500 000 tons of waste annually. This study utilizes DCI solid waste as an adsorbent to remove the crystal violet (CV) dye from wastewater. Techniques (XRF, XRD, BET, SEM-EDX, FTIR, TGA-DTG, zeta potential) proved that the waste contains 88.0 wt% periclase (MgO) with nanoscale, high surface area, and abundant surface hydroxyl groups. Response surface methodology showed that the most significant parameters were the adsorbent dose and time contact. The optimal conditions give 93.7% removal efficiency at initial concentration: 38.7 mg …
Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.
Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.
Chemical Engineering
This study investigated the efficiency of thermal carbon chitosan (TCCS) sorbent for CO2 capture from vehicle exhaust emissions within a designed adsorption system. TCCS was synthesized and meticulously characterized using a series of analytical techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Ther- mogravimetric Analysis (TGA), Energy Dispersive X-ray Spectroscopy (EDX), and Differential Scanning Calo- rimetry (DSC). The TCCS adsorbent showed high thermal stability and a heating value (HHV) of 23.5 MJ/kg. Adsorption isotherm study demonstrated that the maximum capacity of CO2 adsorption is 0.084 kg.CO2/kg. TCCS, as well …
Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Roushdy Dr., Nada Amr El-Khashab Eng,, Ahmed Ibrahim Osman Dr., Dalia Amer Ali Dr.
Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Roushdy Dr., Nada Amr El-Khashab Eng,, Ahmed Ibrahim Osman Dr., Dalia Amer Ali Dr.
Chemical Engineering
Water scarcity is a critical issue worldwide. This study explores a novel method for addressing this issue by using ductile cast iron (DCI) solid waste as an adsorbent for phosphate ions, supporting the circular economy in water remediation. The solid waste was characterized using XRD, XRF, FTIR, and particle size distribution. Wastewater samples of different phosphate ion concentrations are prepared, and the solid waste is used as an adsorbent to adsorb phosphate ions using different adsorbent doses and process time. The removal percentage is attained through spectrophotometer analysis and experimental results are optimized to get the optimum conditions using Design …
Glycerol-Free Biodiesel Via Catalytic Interesterification: A Pathway To A Netzero Biodiesel Industry, Nessren Farrag, Omar Youssef Youssef, Esraa Khaled, Omar Aboelazayem
Glycerol-Free Biodiesel Via Catalytic Interesterification: A Pathway To A Netzero Biodiesel Industry, Nessren Farrag, Omar Youssef Youssef, Esraa Khaled, Omar Aboelazayem
Chemical Engineering
Conventional biodiesel manufacturing uses alcohol as an acyl acceptor, resulting in glycerol as a side product. The increased demand for biodiesel has led to the production of a substantial surplus of glycerol, exceeding the market need. Consequently, glycerol is now being regarded as a byproduct, and in some cases, even as waste. The present study aims to suggest an economically viable and ecologically friendly approach for maintaining the viability of the biodiesel sector. This involves generating an alternative byproduct of higher value, rather than glycerol. Triacetin is produced through the interesterification of triglycerides with methyl acetate, and is a beneficial …
Utilization Of Iron Fillings Solid Waste For Optimum Biodiesel Production, Fady Ihab Bayoumy Eng., Ahmed Osman Ahmed Dr., David W. Rooney Dr., Mai H. Roushdy
Utilization Of Iron Fillings Solid Waste For Optimum Biodiesel Production, Fady Ihab Bayoumy Eng., Ahmed Osman Ahmed Dr., David W. Rooney Dr., Mai H. Roushdy
Chemical Engineering
This study explores the innovative application of iron filings solid waste, a byproduct from mechanical workshops, as a heterogeneous catalyst in the production of biodiesel from waste cooking oil. Focusing on sustainability and waste valorization, the research presents a dual-benefit approach: addressing the environmental issue of solid waste disposal while contributing to the renewable energy sector. Particle size distribution analysis, X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray fluorescence (XRF), Thermal analysis (TG-DTA), and FTIR analysis were used to characterize the iron filings. The response surface methodology (RSM) was used to guide a series of experiments that were conducted to …
Valorisation Of Water Hyacinth For Different Engineering Applications, Nessren Farrag, Zeinab Elbhnsawi, Omar Aboelazayem
Valorisation Of Water Hyacinth For Different Engineering Applications, Nessren Farrag, Zeinab Elbhnsawi, Omar Aboelazayem
Chemical Engineering
Nature has many elements that can be beneficial or harmful. One of these elements is water hyacinth (WH) which is an aquatic weed found in water bodies such as rivers and lakes and it has an invasive nature due to its rapid growth rate. On the contrary, water hyacinth, despite its classification as an invasive plant species, possesses a multitude of industrial and engineering applications, demonstrating substantial potential for valorisation into various products. Its versatile attributes and widespread availability render water hyacinth a viable resource for deployment across several sectors, including wastewater treatment, bioenergy generation, bioremediation, and sustainable agriculture. The …
Modelling And Optimization For An Operating Giant Gas Plant In Egypt, Nessren Farrag, Mohamed Shebl, Mai Fouad, Abdulaziz Abdulaziz
Modelling And Optimization For An Operating Giant Gas Plant In Egypt, Nessren Farrag, Mohamed Shebl, Mai Fouad, Abdulaziz Abdulaziz
Chemical Engineering
An Egyptian gas-producing plant located in the north of Egypt on the coast of the Mediterranean Sea near Port Said city is designed mainly to receive and treat natural gas produced from offshore wells. The plant designed capacity is around 2800 million standard cubic feet per day (MMSCFD), which gives it a highly appreciated strategic importance. The primary plant process is removing H2S associated with the produced gas using amine solutions. The plant contains seven units called gas trains, which use packed columns for the removal. An additional acid gas removal unit was involved in the early production facility, which …
Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Augmented Formic Acid Electro-Oxidation At A Co-Electrodeposited Pd/Au Nanoparticle Catalyst, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Chemical Engineering
In this study, the formic acid electro-oxidation reaction (FAEOR) was catalyzed on a Pd-Au co-electrodeposited binary catalyst. The kinetics of FAEOR were intensively impacted by changing the Pd2+:Au3+ molar ratio in the deposition medium. The Pd1-Au1 catalyst (for which the Pd2+:Au3+ molar ratio was 1:1) acquired the highest activity with a peak current density for the direct FAEOR (Ip) of 4.14 mA cm−2 (ca. 13- times higher than that (ca. 0.33 mA cm−2) of the pristine Pd1-Au0 catalyst). It also retained the highest stability that was denoted in fulfilling ca. 0.292 mA cm−2 (ca. 19-times higher than 0.015 …
Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Synergistic Enhancement Of Formic Acid Electro-Oxidation On Ptxcuy Co-Electrodeposited Binary Catalysts, Yaser M. Asal, Ahmad M. Mohammad, Sayed S. Abd El Rehim, Islam M. Al-Akraa
Chemical Engineering
A propitious binary catalyst composed of Pt and Cu which were electrodeposited simultaneously onto a glassy carbon (GC) substrate was recommended for the formic acid (FA) electro-oxidation reaction (FAOR); the principal anodic reaction in the direct FA fuel cells (DFAFCs). The simultaneous co-electrodeposition of Pt and Cu in the catalyst provided an opportunity to tune the geometric functionality of the catalyst to resist the adsorption of poisoning CO at the Pt surface that represented the major impediment for DFAFCs marketing. The catalytic activity of the catalyst toward FAOR was significantly influenced by the (Pt4+/Cu2+) molar ratio of the electrolyte during …
Castor Oil Conversion To Biodiesel: A Process Simulation Study, Yaser M. Asal Mr, Islam M. Al-Akraa, Ahmad M. Mohammad, Razan Aymen
Castor Oil Conversion To Biodiesel: A Process Simulation Study, Yaser M. Asal Mr, Islam M. Al-Akraa, Ahmad M. Mohammad, Razan Aymen
Chemical Engineering
The aim of this study is to highlights the importance to shift from the use of traditional fossil fuels to biodiesel as a clean energy source. A simulation study has been conducted using ASPEN HYSIS software for the biodiesel production form castor oil. The simulation was run and the properties of the produced biodiesel were highlighted. The optimum conditions resulted in 88 % conversion.
Biodiesel Production From Castor Oil: Mixing Optimization During Transesterification, Yaser M. Asal Mr, Islam M. Al-Akraa, Ahmad M. Mohammad, Hassan E. Hisham
Biodiesel Production From Castor Oil: Mixing Optimization During Transesterification, Yaser M. Asal Mr, Islam M. Al-Akraa, Ahmad M. Mohammad, Hassan E. Hisham
Chemical Engineering
With the growing warning for accrediting the traditional combustion of fossil fuels for energy production, not only for their limited supply but also for their environmental risks (air pollution, climate change, …. etc), it became necessary to realize alternative greener and abundant sources for energy. Instead, the interest to sustain biodiesel for the energy production has recently been renewed as a replacement for petroleum diesel in conventional diesel engines. This was due to its renewable nature, low toxicity, high degradability and unique physical properties (high flash points & lubrication). Castor oil, in particular, appeared promising for biodiesel production with extremely …
Ceramic Tiles Production From Cullet And Agricultural Wastes Obtained From Wheat And Sugarcane Cultivation, Mai H. Roushdy
Ceramic Tiles Production From Cullet And Agricultural Wastes Obtained From Wheat And Sugarcane Cultivation, Mai H. Roushdy
Chemical Engineering
Agricultural wastes are a big source for environmental pollution so it’s a good choice to recycle them so as to get an environmental and economic benefit. The purpose of this research is to determine the possibility of recycling two types of agriculture wastes obtained from wheat and sugarcane cultivation in addition to broken glass (cullet) as raw materials for ceramic wall tiles production. The used agriculture wastes are the agricultural residue obtained from wheat and sugarcane cultivation. The experimental work starts with performing XRF and sieve analysis for all raw materials. Ceramic wall tiles specimens were made with dimensions 110.4 …
Graphical Design And Analysis Of Mass Exchange Networks Using Composition Driving Forces, Nessren Mohamed Farrag, Dina Ahmed Kamel, Ayat Ossama Ghallab, Mamdouh Ayad Gadalla, Mai Kamal Fouad
Graphical Design And Analysis Of Mass Exchange Networks Using Composition Driving Forces, Nessren Mohamed Farrag, Dina Ahmed Kamel, Ayat Ossama Ghallab, Mamdouh Ayad Gadalla, Mai Kamal Fouad
Chemical Engineering
Pinch analysis is a methodology for minimizing energy and mass consumption in different industries. It has been widely applied for more efficient processes. This study presents a new graphical-approach to analyze and design Mass Integration (MI) and exchange networks that follows Pinch principles to guarantee maximum mass recovery with minimum losses. This technique uses the composition driving forces in network representation as it rules the mass transfer between streams. The proposed approach can be applied on both existing mass networks as well as new ones. This graphical representation a visual descriptive design tool to describe and explain the details of …
Recycling Of Cullet, Waste Clay Bricks And Wastes Resulted From Wheat And Sugarcane Cultivations In The Manufacture Of Fired Clay Bricks, Mai H. Roushdy
Recycling Of Cullet, Waste Clay Bricks And Wastes Resulted From Wheat And Sugarcane Cultivations In The Manufacture Of Fired Clay Bricks, Mai H. Roushdy
Chemical Engineering
The agriculture wastes are considered as a big environmental problem. The main purpose of this research is to determine the possibility of producing fired clay bricks from a mixture of agriculture wastes in addition to other wastes. The first type of wastes is the cullet while the second type is the wastes is the waste clay bricks (Homra) and the third is an agricultural residue obtained from wheat and sugarcane cultivation. The first step of the experimental work is performing XRF and sieve analysis for raw materials. Brick samples with Cubic shape with dimensions 50 × 50 × 50 mm3 …
Optimization Of Nitrate Removal From Aqueous Solution By Acid-Activated Rice Straw Supported Nano Zero-Valent Iron Using Response Surface Methodology, Dalia A. Ali Eng, Nagwa Mahmoud Al-Mansi Prof, Mohamed Amin Sadek Prof., Ahmad Wafiq Abolnasr Dr.
Optimization Of Nitrate Removal From Aqueous Solution By Acid-Activated Rice Straw Supported Nano Zero-Valent Iron Using Response Surface Methodology, Dalia A. Ali Eng, Nagwa Mahmoud Al-Mansi Prof, Mohamed Amin Sadek Prof., Ahmad Wafiq Abolnasr Dr.
Chemical Engineering
Rice straw is one of the most common agricultural wastes due to its large production amounts. Energy valorization of rice straw is a technology used for nitrate removal as the produced ashes used to generate the adsorbent by means of an alkali dissolution followed by acid precipitation. The novelty of the proposed process is that the production of the nano zero-valent iron supported acid-activated rice straw (AARS-nZVI) adsorbent is carried out without the energy valorization process but, through an acid activation for rice straw followed by precipitation of nZVI particles on its surface. The new adsorbent synthesis, characterization and application …
Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr
Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr
Chemical Engineering
The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …
Recycling Of The Mixture Resulted From Sanitary Ware Waste, Roller Kiln Waste And Ceramic Tiles Sludge Waste In The Manufacturing Of Ceramic Floor Tiles, Mai H. Roushdy
Chemical Engineering
Ceramic tiles industry is a big source for wastes that have a bad effect on the environment. The first source of waste is associated with roller kilns as it needs a periodic surface grinding to its rollers which results in a waste powder. The second type of waste is ceramic tiles sludge which produced from a water treatment plant. The third waste is sanitary ware waste which coming out from sanitary ware industry. The main aim of this paper is to investigate the ability of substituting part of the main body mixture of floor tiles by these three types of …
Recycling Of The Mixture Resulted From Roller Kiln Waste And Ceramic Tiles Sludge Waste In The Manufacturing Of Ceramic Floor Tiles, Mai H. Roushdy
Recycling Of The Mixture Resulted From Roller Kiln Waste And Ceramic Tiles Sludge Waste In The Manufacturing Of Ceramic Floor Tiles, Mai H. Roushdy
Chemical Engineering
Ceramic tiles industry produced many types of wastes that are routinely discarded as stock piles. One of the environmental problems associated with roller kilns is the periodic need to grind its rollers which results in a waste powder. The second type of waste is ceramic tiles sludge which produced from a water treatment plant in the ceramic tiles factory. This paper investigates the probability of substituting part of the main body of floor tiles mixture by these two types of waste powder. Many Experiments were done on the raw materials. Rectangular tile specimens were molded, dried and fired. Linear firing …
Novel Adsorbent For Industrial Wastewater Treatment Applications, Islam M. Al-Akraa, Ahmed Y. Zakaria Eng, Dalia A. Ali Eng, Hany A. Elazab Dr, Hoda A. Elsawy Dr
Novel Adsorbent For Industrial Wastewater Treatment Applications, Islam M. Al-Akraa, Ahmed Y. Zakaria Eng, Dalia A. Ali Eng, Hany A. Elazab Dr, Hoda A. Elsawy Dr
Chemical Engineering
In this study, the hydroxyapatite powder is investigated for both of methylene blue and thymol blue in aqueous solution. The physical and chemical properties of the adsorbent were evaluated systematically using the different techniques including Microsoft Excel programming, linear regression model and also the coefficient of determination. Batch adsorption experiments were conducted to determine the effect of contact time, solution pH, initial dye concentrations, and also the adsorbent dosage on adsorption. The adsorption kinetic parameters confirmed the better fitting of pseudo-second order kinetic model for both of methylene blue and thymol blue. The isotherm data of methylene blue and thymol …
A Novel Graphical Approach For Mass Exchange Networks Using Composition Driving Force, Nessren Farrag, Dina Kamel, Ayat Ossama, Mamdouh Gadalla, Mai Fouad
A Novel Graphical Approach For Mass Exchange Networks Using Composition Driving Force, Nessren Farrag, Dina Kamel, Ayat Ossama, Mamdouh Gadalla, Mai Fouad
Chemical Engineering
Raw materials are considered as a corner stone for both chemical and process industries. Raw materials efficient utilization and usage within the process saves a lot. Mass integration is the most competent path to minimize the economic and environmental losses, by minimizing both the amounts of external mass separating agents and waste disposal. Mass exchange networks or MENs is the tool used to apply this integration. This article presents a new graphical approach, based on the composition driving force, to analyse the mass integration and exchange networks. The new approach is illustrated graphically, and can be applied on existing and …
Reuse Of The Product Obtained On Grinding Kiln Rollers In The Manufacture Of Ceramic Wall Tiles, Mai H. Roushdy, Shereen K. Amin, Marwa Mohamed, Magdi F. Abadir
Reuse Of The Product Obtained On Grinding Kiln Rollers In The Manufacture Of Ceramic Wall Tiles, Mai H. Roushdy, Shereen K. Amin, Marwa Mohamed, Magdi F. Abadir
Chemical Engineering
The production of ceramic tiles and to a lesser extent flat dinner ware and pottery is increasingly being done by firing in roller kilns. These kilns offer several advantages over conventional tunnel kilns: lower fuel consumption, computer controlled firing curves, low maintenance due to lack of kiln cars, rapid firing cycles of less than one hour and the possibility of shutting down the kiln on short notice.1 One recurrent problem in the operation of such kilns is the periodic need to grind the kiln rollers. These are usually fabricated from high alumina clays and are continuously contaminated by depositions of …