Other Chemical Engineering Commons^™

Aqueous Redox Flow Batteries With Boron Doped Diamond As An Electrode., Alex M. Bates

Electronic Theses and Dissertations

As the interest and implementation of renewable energy accelerates, so does that of grid energy storage. It is widely believed that a cost-effective energy storage technology will bring about the proliferation of renewable energy. Redox flow battery (RFB) technology represents a promising solution to cost-effective grid energy storage. Compared to other technologies, RFBs have a long lifetime, high efficiency, are non-flammable, significantly reduce cost, and separately scale power and energy. The separation of power and energy enables increased energy capacity by simply adding electrolyte volume. Of the challenges facing RFB technology, one readily apparent is the cost of the active …

Comparative Analysis Of Simulation Models Of The Production Of Ethylbenzene, Osariemen Imafidon

Honors Theses

Process Engineering is all about making sure a raw material can become the desired product with as little variation as possible, while achieving the customer's specifications. Many equipment used for chemical processes cannot be physically inspected during operation at steady state, hence, the need for simulation software. The objective of this study was to compare the results of three different simulation packages to evaluate their efficacy within process design.

This study focused on the economic analysis of the production of Ethylbenzene using various models. The base case variables were inputted into each model to simulate the calculations for a fully …

Ultrasound-Assisted Post-Pyrolysis Magnetization Of Microporous Biochar For Effective Removal Of Heavy Metals, Ronish Shrestha

Honors Theses

Low cost and efficient adsorption of heavy metals from wastewater and thorough removal of adsorbent after water treatment have become the two essential needs for the commercial use of any adsorbent. Biochar (BC), the solid byproduct of pyrolysis with microporous carbonaceous structure, has been increasingly recognized as an efficient adsorbent for a vast number of pollutants. Magnetization, though eases the separation and reuse of BC, significantly reduces its adsorption capacity to a comparatively much higher extent. In this study, a hybrid post-pyrolysis magnetization was developed which sustained and even significantly increased the adsorption capacity of biochar. The process included i) …

Solution To Exide Technologies Inbatec Inefficiency, Reagan Gilker, Mary Fairley, Spencer Christain, Shixuan Hou, Covenson Latouche

Chemical Engineering Undergraduate Honors Theses

The inefficiency of the battery charging time in Inbatec Units 1 and 2 in the Exide Technologies Fort Smith was initially investigated by a student team in Fall 2019, and the investigation was continued into Spring 2020. The Exide Technologies facility in Fort Smith, Arkansas utilizes 13 Inbatec units to charge the lead-acid batteries.

The Inbatec systems circulate the sulfuric acid solution through a cooling tower to maintain to optimal charging temperature. Previous analysis of the charging process for Inbatec Units 1 and 2 show the cooling tower have the capacity to quickly remove the excess heat in the sulfuric …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Adrian Damian, Kevin Le, Mary Johnson, Ethan Phan, Courtney Golman, Michelle Dopp, Jacqueline Payne

Chemical Engineering Undergraduate Honors Theses

The process of mining minerals and elements from ores and rocks creates acid rock drainage (ARD). This drainage is water that contains heavy metals and minerals that can be dangerous for human consumption or damaging to the environment. The mining industry has employed various water treatment methods to prevent these metals and minerals from being discharged into water sources such as ponds, lakes, and streams. Currently, the most used treatment process in the mining industry is a cost-effective highdensity sludge (HDS) process. This method reduces the concentration of metals and elements with the use of lime/limestone. However, the concentration of …

Removal Of Fluoride From Mine Water Via Adsorption For Land-Applied Soil Amendment, Michelle Dopp, Kevin Le, Ethan Phan, Mary Johnson, Jacqueline Payne, Adrian Damian, Courtney Golman

Chemical Engineering Undergraduate Honors Theses

The Moo Pig Sooie’s researched, designed, and economically analyzed a full-scale adsorption column system to be applied in mining processes that leave high amounts of fluoride in their effluent. This system was designed to remove fluoride from water saturated with calcium sulfate, as calcium sulfate is present in high amounts in certain mining processes. Currently, high density sludge (HDS) is commonly employed to reduce fluoride concentrations, but due to solubility limits the sludge treatment cannot lower fluoride below 10 mg/L (ppm). The current enforceable EPA standard for discharged water is at 4 mg/L (ppm), although mining companies anticipate that this …

Quantifying Air Pollution At The Stamford Transportation Center, Brianna Mancuso, Kristina Wagstrom

Honors Scholar Theses

There is a need to analyze particulate matter concentrations at the Stamford Transportation Center according to the Western Connecticut Coalition of Governments. Stamford has recently undergone rapid urbanization and large scale construction resulting in traffic congestion. Congested traffic areas in urban centers are key contributors to poor air quality. Therefore, there is a need to analyze the pollution concentrations at the bus stops near the station. Every day, hundreds of shuttles and cars idle around the Transportation Center. Thousands of passengers wait at nearby bus stops every day and can potentially be exposed to high amounts of vehicle produced pollution …

Pollution Prevention Via Recovery Of Cerium (Iv) Oxide In Optics Company, Eugene Park, William Gallagher, Sydor Optics, Flint Creek Resources

Articles

Pollution prevention methods were applied at an optics manufacturer in an effort to improve recovery of a valuable polishing component, cerium oxide (ceria), 77% of which was lost to dragout and sewer discharge. Centrifugation and microfiltratiion were evaluated to develop a process that would increase recovery of used ceria, which would then be sent back to the ceria supplier for reclamation and reuse. Full-scale implementation included a high-speed centrifuge that operates continuously with a microfiltration system through recirculation in a single process tank. Sydor Optics has improved ceria recovery from 23% to 48%, saving thousands of dollars annually.

Comparison Of Pretreatment Methods For The Production Of Ethanol, Emily Schulte

Honors Theses

Bioethanol provides a great alternative to regular ethanol sources because it uses secondary substrates that are byproducts of other industries, rather than substrates that compete with food products. The technology is available for industrial bioethanol production, but the production costs just aren’t competitive enough with traditional ethanol production. The goal of this project was not to prepare a proposal for a bio-ethanol plant with all of the associated costs and financial calculations, but rather to provide a direct comparison of two pretreatment methods to highlight which factors could make one method less costly than the other. Pretreatment is a critical …

Paper Recycling Fiber Recapture, Abigail Cortright

Honors Theses

The goal of the Yoda Chemical Company Paper Recycling Fiber Recapture project and subsequent report was to identify and recommend plant optimization opportunities associated with the potential recovery of five waste streams. Additionally, an analysis of the upgrade’s design was completed in order to determine the economic viability of fiber recapture. Beginning the analysis, the five waste streams were identified and analyzed. The waste streams include the top liner, back liner, and filler liner primary cleaner rejects on the K1 machine, the common rejects from under the K3 paper machine, and the tertiary cleaner rejects from stock preparation.

Two different …

Development Of A Flexible Printed Paper-Based Battery, Justone Crosby

Honors Theses

Market demand for flexible electronics continues to grow, which, in turn, increases the demand for flexible energy storage devices. There are several types of energy storage devices available, including the alkaline (Zn-MnO₂) battery, which is the subject of this project. This project's objective was to develop a flexible, printed paper-based battery, which may be a sustainable solution to the increasing market demand. This device is low-cost and can be manufactured commercially using a scalable process.

The proposed device is an alkaline flexible cell, whose components can be printed onto paper. This alkaline system includes a zinc-based negative electrode …

Tunable Luminescence Of Rare Earth Doped Nanophosphors Via Adaptive Optical Properties Of Transition Metals, Pragathi Darapaneni

LSU Doctoral Dissertations

Over the past decades, the development of light-emitting diodes (LEDs) to produce a wide range of wavelengths has revolutionized the solid-state lighting industry due to their higher energy efficiency and operational lifetimes. These LEDs employ rare earth (RE) doped phosphors due to their stable emission wavelengths which can be amplified when sensitized by other RE dopants (Yb, Ce) or shell layer passivation. However, there has been a push to replace the RE elements in LEDs due to increased socioeconomic issues. One proposed alternative, transition metal (TM) dopants, is typically avoided due to their susceptibility to the local crystal environment resulting …

Enhancing Chemical Sensing With Seira And Silicon Carbide Gratings, Autumn Bruncz, Thomas Folland, Joshua Caldwell, Marko Tadjer

Research Horizons Day Posters

No abstract provided.

Dlvo Interactions Of Janus Ellipsoids With A Planar Surface, Kailian Davis

Research Horizons Day Posters

No abstract provided.

Features Of Hydration Process, Structure Formation And Curing Processes Of Mono And Polymineral Cement In The Presence Of Additives Of Solid Waste Of Soda Production, Nargis Shamadinova, Gulnora Abdukadirovna Tokhtakhunova Phd, Temur Azimovich Atakuziev, Shakhnoza Saidanvarovna Rakhimjanova

Chemical Technology, Control and Management

The influence of the additive of solid waste of soda production (SWSP) on the content of -C₂S and C₃S in cement studied. It was found that SWSP affects the density of the aluminum-containing minerals C₃A and C₄AF, in addition, in the presence of gypsum, their plasticizing properties improved. The introduction of SWSP additives during grinding of clinker intensifies the grinding process and made it possible to obtain a more plastic cement. It was proved that SWSP with CaCl₂ content can be used as an additive to concrete and cement mortars - …

Impact Of Team Formation Approach On Teamwork Effectiveness And Performance In An Upper-Level Undergraduate Chemical Engineering Laboratory Course, Erick S. Vasquez, Matthew J. Dewitt, Zachary J. West, Michael J. Elsass

Chemical and Materials Engineering Faculty Publications

This study focuses on the impact of team formation approach on teamwork effectiveness and performance spanning three years of instruction of the chemical engineering unit operations laboratory, which is an upper-level undergraduate laboratory course. Team formation approaches changed each year, and assessment tools, including peer-assessment, academic performance, and course evaluations, were employed to evaluate team performance. Approaches included three cases: instructor-selected teams based on GPA with the objective of a similar cumulative average GPA for each team, student self-selected teams, and a combination of self-selected teams with instructor-selected teams for a final experiment. For the third case, new teams were …

Noble-Transition Alloy Absorbers For Near-Infrared Hot-Carrier Optoelectronics, Sara Karoline Figueiredo Stofela

LSU Doctoral Dissertations

Optoelectronics is the field of technology concerned with the study and application of electronic devices that source, detect and control light. Here we focus on the optical communications field which relies on optical fiber systems to carry signals to their destinations operating in the near-infrared range. To improve the performance of current optical fiber systems, one of the paths is to develop better near-infrared photodetectors.

The current group of materials used for near-infrared photodetection relies in the III-V semiconductor family. Although their spectral photosensitivity correlates well with the near-infrared, response time performance and electronic circuit integration remain limited for this …

Development Of Novel Adsorbent For Industrial Waste Water Treatment, Islam M. Al-Akraa, Hassan M. Shehata Eng, Dalia A. Ali Eng., Hoda A. Elsawy Dr

Chemical Engineering

The main objective of this research project is to perform some experimental procedures to inform the ability of the novel adsorbent used in this project. The chemical modification of the adsorbent is the chemical oxidation of pure powder chitosan using some specific redox pairs which are potassium dichromate and sodium bisulphite. After preparing the modified chitosan, there are some parameters that must be discussed during the adsorption process. The first parameter is the time parameter, showing experimentally the optimum time for adsorption under certain conditions by collecting values of absorbance and concentration of thymol blue adsorbed after the process from …

Organophosphorus-Hydrazides As Potential Reactive Flame Retardants For Epoxy, Alexander B. Morgan, Vladimir Benin, Donald A. Klosterman, Abdulhamid Bin Sulayman, Mustafa Mukhtar, Mary L. Galaska

Chemical and Materials Engineering Faculty Publications

For structural composites used in vehicles and aircraft, flame retardant chemistries which enhance char formation and reduce heat release are preferred. Phosphorus-based and phosphorus–nitrogen flame retardants for epoxies have been well studied to date, but phosphorus hydrazides have not been studied for their flame-retardant potential in epoxy. These hydrazides offer some novel structures and they can potentially offer a combination of vapor and condensed phase flame retardant action. A series of eight compounds were systematically investigated in this study as reactive flame retardants in a bisphenol F epoxy/aliphatic amine resin system at a level of 2.5 wt% phosphorus. Results suggest …

Design Of Pigments For Use In “Cool” Coatings, Tyler Laughorn

Williams Honors College, Honors Research Projects

This project was focused on the development and testing of several novel pigments that exhibit high NIR-reflectance and therefore show potential for use in “cool” coatings. A “cool” coating will reflect more solar radiation than other standard coatings, and so a coated structure would require less energy to keep cool. Four sets of pigments were synthesized: Co_1-xMg_xCr₂O₄ (teal), Co_0.25Mg_0.75Cr_2-yAl_yO₄ (blue), Ti_1-x-yNi_xSb_yO₂ (yellow), and Cr_2-xFe_xO₃ (black). NIR and TSR values were then measured …

Filtration Apparatus Design For Oil-Water Separation Using Membranes And Sponges, Alec Jerger

Williams Honors College, Honors Research Projects

It can be difficult to separate water and oil emulsions through traditional filtration. Therefore, investigations of filtering using thermo-responsive (TR) polymers, in this case poly(vinyl methyl ether) (PVME), was conducted. It’s hypothesized that below its lower critical solution temperature (LCST), PVME has an affinity for water while oil substances do not. Above the LCST the opposite will be true. To verify this hypothesis, iterations of filtration designs were created to provide optimum control over the parameters to measure flow. The final optimized experimental apparatus was a Chromaflex glass column which was air tight and controlled all parameters besides fluid flow. …

Testing The Effectiveness Of Reflective "Cool" Pigments, Ashleigh Carpenter

Williams Honors College, Honors Research Projects

This project is an exploration of reflective "cooling" pigments used in coatings for the exterior of a structure in order to control the temperature inside. The pigments reflect sunlight to reduce the heating effect inside a structure. While the project will include the synthesis and testing of these pigments, the focus will be on the design and construction of an apparatus to test the effectiveness of these pigments. An apparatus will be constructed with a heat source and two structures of identical dimensions. The set-up will allow for the temperature of the inside of the structures to be recorded at …

Directed Assembly Of Binary Magnetic Particles, Thomas Thelen

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

A Foundational Approach To Extrusion And Compounding, David Frankart

Williams Honors College, Honors Research Projects

With a history of nearly 200 years, polymer processing and compounding is constantly changing to fit the material science needs of the era. Exposure of undergraduate students to the technology and practices used in industry today in a lab setting would create new opportunities for experiential learning and growth. The objective was to set up a 0.75”, 25 L/D Thermo Haake single screw extruder for lab use and run trials of material in a single screw extruder to set up a basis for experiments. Trials were run of co-polyester resin through a single screw extruder with carbon fiber additives varying …

Process Modeling And Techno-Economic Analysis Of Thermo-Catalytic Dimethyl Ether Synthesis And Microwave-Based Aromatics Production Technologies From Shale Gas, Chirag Mevawala

Graduate Theses, Dissertations, and Problem Reports (ETD)

Production of dimethyl ether (DME) and direct non-oxidative methane dehydroaromatization (DHA) to aromatics via conventional and microwave (MW)-assisted processes are investigated in this research. Plant-wide models of the shale gas to DME process with integrated CO₂ capture via direct and indirect synthesis routes have been developed. Optimal parameter estimation, and model validation are undertaken for various sections of the process including the pre-reforming reactor, auto-thermal reforming reactor, DME synthesis reactors, CO₂ capture units and separation sections. A novel DME separation process has been developed for efficient separation of DME, syngas, and CO₂. Plant-wide techno-economic optimization is …

Next Generation Of Applications Of Metal-Organic Frameworks For Energy And Environmental Sustainability, Qian Liu

Graduate Theses, Dissertations, and Problem Reports (ETD)

My PhD work aimed at using Metal-organic frameworks (MOFs) for mitigating the environmental issues and energy crisis associated with anthropogenic activities. Specifically, we developed robust platforms and/ or systems using MOF as “scaffolds” to allow for model pollutant detection and CO₂ sequestration and benign transformation respectively.

First, I detailed how photocatalytic properties of 2,5-furandicarbocylic acid (FDCA) in its alone and its MOF- integrated form (MIL-160) were used for the first time for the reduction of Ag⁺ at room conditions. Such photocatalytic activities could then be used in user-designed hybrids (i.e., Ag/MIL-160) to form sensorial platforms for prevalent phenol …

Review Of Established And Emergent Methods For The Production Of C4 Olefins, James Matthew Koval

Graduate Theses, Dissertations, and Problem Reports (ETD)

Current production of C₄ olefins is dominated by naphtha cracking and butane dehydrogenation, but significant research interest is developing in alternate feedstocks due to an abundance of inexpensive natural gas and bioethanol. The current C₄ olefin production methods are costly, make use of already-depleted petroleum resources, and are often hazardous to workers, which forms the impetus for investigation into alternative methods and assessment of their viability as a future means of olefin production. Methods of natural gas conversion to higher order hydrocarbons are discussed, including Fischer-Tropsch synthesis and oxidative methane coupling, each of which could form the first …

Elucidating The Properties And Mechanism For Cellulose Dissolution In Tetrabutylphosphonium-Based Ionic Liquids Using High Concentrations Of Water, Brad Crawford

Graduate Theses, Dissertations, and Problem Reports (ETD)

The structural, transport, and thermodynamic properties related to cellulose dissolution by tetrabutylphosphonium chloride (TBPCl) and tetrabutylphosphonium hydroxide (TBPH)-water mixtures have been calculated via molecular dynamics simulations. For both ionic liquid (IL)-water solutions, water veins begin to form between the TBPs interlocking arms at 80 mol % water, opening a pathway for the diffusion of the anions, cations, and water. The water veins allow for a diffusion regime shift in the concentration region from 80 to 92.5 mol % water, providing a higher probability of solvent interaction with the dissolving cellulose strand. The hydrogen bonding was compared between small and large …

Wastewater Treatment Fatty Acids For Biodiesel Production, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater scum is the thick oily substance that floats on top of the primary and secondary tanks within a wastewater treatment plant. Scum has a 30% to 60% lipid content making it an excellent resource for the biodiesel industry. Also the use of scum would reduce the cost of current management practices such as landfill disposal or incineration. In this article there is an overview of lipid byproducts currently being produced at wastewater treatment plants today. This is followed by a presentation showing a full length process for turning wastewater scum into biodiesel raw material.

Techno-Economic Analysis Of Acetaldehyde Production Via Partial Oxidative Dehydrogenation Of Ethanol, Sudarat Sompong

Chulalongkorn University Theses and Dissertations (Chula ETD)

Due to the increased attention regarding the battery electric vehicles, the demand for ethanol as a biofuel may be reduced in the future. Therefore, ethanol transformation towards acetaldehyde is conducted in this work, primarily because of the higher selling price and several advantages of acetaldehyde. Regarding the acetaldehyde preparation, acetaldehyde is produced by partial oxidative dehydrogenation of ethanol. According to the economic analysis results, at the same price of acetaldehyde, an annual production capacity of 120,000 tons is the most profitable production size. In addition, the potential process of producing acetaldehyde from ethanol is acetaldehyde production process at 200°C since …