A Study Of Wear Measurement And Life Prediction Of Insert Chute Liner On Gold Ore Processing, Ferry Ardika Natanael, Nony Maulidya, Dedi Priadi

Journal of Materials Exploration and Findings

Chutes are critical materials handling assets to transport solid particles from one process step to another in mineral processing, coal mining and cement industries. The material transport, because of material characteristics, cause severe wear on internal lining of chutes or bins’ structure. The wear problem on internal lining of bins or chutes needs to be checked to keep production efficiency. Therefore, not checked wear rate causes liner replacement schedule becomes unpredictable. It leads to production loss and highly cost maintenance in industry. This study shows that condition-based maintenance through regular thickness measurement using Ultrasonic Transducer (UT) to predict life service …

Analysis Of Leak Testing Planning For Carbon Dioxide Piping Systems In The Development Of Carbon Capture, Utilization, And Storage Facilities In The Bintuni Basin, Devi Sentiani, Akhmad Herman Yuwono Professor

Journal of Materials Exploration and Findings

Carbon Capture, Utilization, and Storage (CCUS) technologies have become a key strategic response to global efforts to reduce CO₂ emissions. This study presents a leak testing strategy designed for a carbon dioxide (CO₂) piping system as part of a Carbon Capture, Utilization, and Storage (CCUS) project in the Bintuni Basin, West Papua, Indonesia. This study aims to ensure the system is properly prepared before commissioning by designing a leak test plan that is both practical and technical, based on ASME B31.3, ASME PCC-2, and API STD 520 Part 1. We conducted the process, which involves identifying the system boundaries, …

Improving Particle-Phase Nitrate Measurement In Pm2.5 Filter Sampling: Evaluation Of A Denuder–Nylon Filter Modification In The Spartan Network, Wenyu Liu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Accurate measurement of PM_2.5 composition is of global importance. Evaporation-induced mass loss introduces potential bias in filter-based PM_2.5 measurements, with ammonium nitrate volatilization from Teflon filters being a major contributor to negative mass artifacts. Previous studies have demonstrated that using an acid gas denuder in combination with nylon filters can help recover the nitrate mass. This study evaluates design modifications to the AirPhoton sampling station setup within the globally distributed Surface Particulate Matter Network (SPARTAN) incorporating an additional acid gas denuder upstream and a nylon filter downstream of the existing Teflon filter.

Two co-located AirPhoton Sampling stations were …

Non-Thermal Dbd Plasma-Induced Co₂ Capture And Conversion To Value Added Chemicals, Chinwendu Theresa Umeojiakor

Theses and Dissertations

Electrified CO2 conversion via nonthermal dielectric-barrier discharge (DBD) plasma presents a promising pathway for integrating renewable energy into the carbon cycle, addressing the dual challenges of CO2 reduction and sustainable fuel generation. In this research, DBD plasma technology was integrated with a sorbent material and/or catalytic materials for CO2 desorption and conversion. Specifically, with Ni/Al2O3 as the catalyst, we investigated CO2 splitting (CO2 to CO and 0.5O2) and hydrogenation (CO2 and H2 to CO and H2O) under adiabatic and subcooled conditions. We find that CO2 splitting shows higher efficiency than hydrogenation, particularly at relatively lower power inputs. While CO2 hydrogenation …

Reactive Molecular Dynamics And Method Development For Applications In Renewable Energy And Sorption Equilibria, Woodrow Wilson

Theses and Dissertations

It is crucial to harness energy from sustainable sources to combat the dwindling nonrenewable feedstocks used to produce everyday commodities and fuels. Liquid-phase heterogeneous catalysis has demonstrated remarkable product selectivity and yields for reactions relevant to biomass valorization under mild operating conditions. However, active site characterization is challenging due to the complex solvated environment and interface. Ground-state first-principles (FP) molecular simulations have provided insights into reactive systems in catalysis. These calculations, however, scale poorly with the number of electrons. Observing atomic motion with molecular dynamics (MD) or sampling static properties with Monte Carlo (MC) simulations at statistically relevant lengths- and …

From Chemistry To Conscious Code: How Ai Is Shaping The Next Generation Of Sustainable Innovation, Shehan S. Makani

STEM for Success Showcase

In a world racing toward an uncertain future, we stand at the thrilling intersection of chemistry, artificial intelligence, and human resilience. For many of us in STEM, this is no longer just about mastering equations or coding algorithms - it’s about engineering the future itself. At NJIT, we are not just students and researchers - we are builders, thinkers, and dreamers. And the truth is, the world needs dreamers with tools now more than ever.

Smart Manufacturing In Chemicals, Shehan S. Makani

STEM for Success Showcase

The chemical and pharmaceutical manufacturing sectors are evolving toward intelligent, adaptive production systems. This white paper explores how AI-enabled machinery and connected equipment are transforming chemical process efficiency, product quality, and sustainability. Drawing from conceptual case studies at ChemRich USA and ChemeNova LLC, we propose a framework where AI models interface with real-time machine data from centrifuges, filters, reactors, and mixers to enhance formulation, reduce downtime, and enable on-demand customization. The result is a more agile, data-driven, and sustainable manufacturing paradigm.

Recent Advances In Developing Cell-Free Protein Synthesis Biosensors For Medical Diagnostics And Environmental Monitoring, Tyler P. Green, Joseph P. Talley, Bradley Charles Bundy

Faculty Publications

Cell-free biosensors harness the selectivity of cellular machinery without living cells’ constraints, offering advantages in environmental monitoring, medical diagnostics, and biotechnological applications. This review examines recent advances in cell-free biosensor development, highlighting their ability to detect diverse analytes including heavy metals, organic pollutants, pathogens, and clinical biomarkers with high sensitivity and specificity. We analyze technological innovations in cell-free protein synthesis optimization, preservation strategies, and field deployment methods that have enhanced sensitivity, and practical applicability. The integration of synthetic biology approaches has enabled complex signal processing, multiplexed detection, and novel sensor designs including riboswitches, split reporter systems, and metabolic sensing modules. …

Simulation Of Photochemical Effects On Air Quality, Grace Li

Chemical Engineering Undergraduate Honors Theses

Nitrogen dioxide (NO₂) and ozone (O₃) are both EPA criteria air pollutants in the troposphere, largely generated by combustion and therefore present in significant concentrations in urban areas. Sunlight facilitates chemical reactions between pollutants and ambient air. Aerosols modulate the amount of available energy required to drive such photochemical reactions, ultimately impacting air quality. Simulating photolysis rates with FastJX software is a resource-efficient strategy to study how these aerosols can affect air quality.

Cultivation Of Botryococcus Braunii For The Production Of Hydrocarbons Suitable For Fuel Use, Bryan C. Carroll

All Theses

Energy security, rural poverty, and climate change are pressing issues of our time. Biofuels provide a solution to these issues, with a focus on sustainable aviation fuel, SAF, due to compatibility with aircraft infrastructure and energy density. This research aims to review and produce knowledge about a specific microalga, Botryococcus braunii, for its potential for SAF. First a literature review on the process was conducted followed by an experimental study on the impact of aqueous media and inorganic carbon its growth and hydrocarbon content. The literature review found the process consists of cultivation followed by lipid extraction or hydrothermal …

Impact Of Cysteine And Tyrosine Dipeptides On Cho Cell Performance In A Perfusion Mimic, Corrin L. Pruitt

All Theses

Perfusion cell cultures typically achieve higher cell densities and generate higher volumetric productivities than fed-batch cultures due to continuous nutrient supply and spent media removal. Despite these advantages, perfusion cell cultures remain underutilized for licensed product manufacturing, primarily due to the lack of small-scale perfusion models for high-throughput process development and the complexities involved in media formulation capable of supporting high cell densities during long-term continuous operation. To avoid nutrient limitation at high cell densities, current perfusion processes rely on using higher perfusion rates, which results in significant media wastage and downstream product dilution. Therefore, there has been an effort …

Impact Of Biodegradation On The Mechanical And Fatigue Properties Of 3d-Printed Pla Bone Scaffolds, Hamed Bakhtiari, Alireza Nouri, Muhammad Aamir, Mohadeseh Najafi, Majid Tolouei-Rad

Research outputs 2022 to 2026

A proper degradation rate of bone scaffolds ensures optimal mechanical support and effective tissue regeneration. The present study examines the degradation effects of simulated body fluids (SBF) on the compressive and fatigue strength of 3D-printed PLA bone scaffolds. Scaffolds with varying surface-to-volume (S/V) ratios and identical porosity (60 %) were immersed in Hanks' solution for a maximum period of 30 days. Static and dynamic compression tests were performed at different immersion times to assess how S/V ratio influences the degradation process. CT images showed that scaffold pore structure remained interconnected after biodegradation, with no significant change in strut thickness or …

Advancement Of Biocarbon Materials In Sustainable Thermal And Electrochemical Energy Storage With Future Outlooks, Md Shahriar Mohtasim, Barun K. Das

Research outputs 2022 to 2026

Biocarbon exhibits significant potential in thermal and electrochemical energy storage owing to its higher surface area, flexible porosity, and superior thermal stability, facilitating effective energy absorption, storage, and conversion. Additionally, its sustainable and cost-effective nature, derived from renewable biomass, aligns with the growing demand for eco-friendly solutions. There is not enough review work that offers comprehensive details on the unique properties of biocarbon (both animal and plant-derived), synthesis and characterization methods, the root level mechanism of biocarbon's interaction with phase change materials (PCMs) matrix, the generalization of thermal and electrochemical regulation with an emphasis on the benefits to the environment …

Curved Confinement Directs Anchoring-Mediated Structural Transitions In Highly Chiral Liquid Crystal Shells, Sepideh Norouzi, Jeremy Money, Stiven Villada-Gil, José Martínez-Gonález, Monirosadat Sadati

Faculty Publications

Cholesteric liquid crystals (CLCs) confined in curved geometries exhibit a rich spectrum of defectmediated morphologies governed by the interplay between chirality, curvature, surface anchoring, and confinement. This study systematically investigates structural transitions in highly chiral CLC shells under asymmetric anchoring conditions, focusing on the effects of shell thickness and curvature on pitch axis reorientation and defect formation. Utilizing microfluidic techniques, we generate core–shell droplets with independently tunable anchoring at inner and outer aqueous interfaces. Transitioning from planar–planar to planar-homeotropic boundary conditions via surfactant-mediated modulation induces profound reorganizations in the director field, giving rise to focal conic domains (FCDs), stripe patterns, …

The Influence Of Surface Textural Properties And Adsorption Temperature On H2 Adsorption And Storage Performance Of Mil-88b(Fe) Mofs, Tawanda Matamba, Samira Sadeghi, Hussein Rasool Abid, Masoumeh Zargar, Alireza Keshavarz, Stefan Iglauer

Research outputs 2022 to 2026

To advance the establishment of a stable H2 economy we need to solve the issue regarding its storage. The physicochemical properties of Metal Organic Frameworks (MOFs) make them suitable for H2 storage. Therefore, here, we synthesized two Iron-based MOFs (12-MIL-88 B(Fe), 24-MIL-88 B(Fe) at different reaction times (12 h and 24 h), to investigate the relationship between adsorption temperature and pressure with the material's surface textural properties towards H2 storage (at 30 °C, 0 °C, −78.5 °C, and −196.15 °C and from vacuum pressure to 55 bar). Results showed that at 30 °C and 0 °C adsorption temperature, H2 adsorption …

Development And Evaluation Of Supported Ionic Liquid Membrane And Porphyrin Frameworks For Carbon Capture Separation, Sarang Ismail

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

The global urgency to mitigate anthropogenic CO₂ emissions has intensified the pursuit of energy-efficient separation technologies. Supported Ionic Liquid Membranes (SILMs) have emerged as promising candidates for CO₂ capture due to their tunable solubility-selectivity and low energy requirements. However, challenges such as mechanical instability, limited scalability, and trade-offs in transport performance have impeded their widespread adoption.

This thesis explores a systematic approach to designing and optimizing SILMs for enhanced CO₂ separation by tailoring polymer–ionic liquid interactions, processing conditions, and material architectures. A comprehensive set of studies were conducted using poly(vinylidene fluoride) (PVDF) with varying molecular weights, different grades of PEBAX®, …

Mantle Flow And Crustal Deformation Revealed By Seismic Anisotropy In The Subduction Zone Beneath Myanmar, Enbo Fan, Mingming Jiang, Yinshuang Ai, Stephen S. Gao, Kelly H. Liu, Yumei He, Yiming Bai, Guangbing Hou, Yuan Ling, Chit Thet Mon, Myo Thant, Kyaing Sein

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The oblique convergence of the Indian and Eurasian plates drives significant deformation in the crust and mantle beneath Myanmar. However, the crustal deformation in the Indo-Burman Ranges (IBR) and mantle flow beneath Myanmar and adjacent areas remain unclear due to limited studies. We utilized data from the newly deployed second phase of the China-Myanmar Geophysical Survey of the Myanmar Orogen array to perform shear wave splitting analysis of PKS, SKKS, and SKS (XKS) phases. Our results, together with previous findings, provide new insights into mantle flow and crustal deformation across central Myanmar. In the IBR, we observed a transition from …

Polymer-Enhanced Nanopore Sensing, Eugene Gyasi Agyemang

Graduate Theses and Dissertations

The resistive pulse technique characterizes single analytes by detecting fluctuations in the ion current as they pass through a narrow orifice connecting two electrolyte-filled chambers, each containing a single electrode. The amplitude, shape, frequency, and duration of these fluctuations primarily provide information about the analyte’s size, shape, concentration, and net surface charge, respectively. One configuration for resistive pulse measurements is of an electrolyte-filled nanopipette immersed in a bath, where the nanopipette tip acts as the nanoscale orifice. It was previously shown that incorporating the large quantities polymer polyethylene glycol (PEG 8K, 50% w/v) into the external electrolyte bath dramatically enhanced …

Evaluation Of Salt-Free Electrodialysis Metathesis For High Recovery Inland Desalination Brine Management, Tayia Oddonetto

Open Access Theses & Dissertations

Salt-Free Electrodialysis Metathesis (SF-EDM) is an emerging electro-driven membrane technology designed to minimize brine discharge while enabling selective ion separation and resource recovery. This dissertation presents an evaluation of SF-EDM, spanning bench-scale studies with synthetic brine from the Brackish Groundwater National Desalination Research Facility in Alamogordo, NM, real reverse osmosis (RO) brines from the Kay Bailey Hutchinson Desalination Plant in El Paso, TX, and finally a weeklong pilot demonstration at the Yuma Desalting Plant in Yuma, AZ. Bench-scale experiments established process feasibility and performance trends, while pilot results revealed the value of pre-treatment and system configuration. SF-EDM demonstrated high hydraulic …

Techno-Economic Analysis (Tea) And Life-Cycle Assessment (Lca) Of Sustainable Aviation Fuel (Saf) Production Through Circular Economy (Ce) Practices: A Focus On Supply Chain Optimization And Policy Implications, Edmund Gyandoh

Chemical and Biological Engineering ETDs

This study provides a comprehensive systems-level evaluation of an integrated circular biorefinery for sustainable aviation fuel (SAF) production. Employing supply chain optimization, technoeconomic analysis, lifecycle analysis, policy modeling, and multicriteria decision analysis, the research assesses technical feasibility, economic viability, and environmental performance. The circular economy model demonstrates exceptional resource efficiency, achieving a 92.3% overall circularity score with strong material recycling, water reuse, waste minimization, and near-complete energy recovery, resulting in net-negative carbon emissions and net energy export. Scaling the facility to commercial capacity (500 million liters per year) enables significant economic improvements. The minimum fuel selling price (MFSP) decreases from …

Discovering And Designing Novel Perovskite Photovoltaic Materials Via Machine Learning, Junyeong Ahn

Discovery Undergraduate Interdisciplinary Research Internship

Perovskite semiconductors are promising materials for high-efficiency photovoltaics due to their outstanding optoelectronic properties, emerging as a sustainable energy source through solar cell applications. Perovskites with the ABX₃ composition (A, B = metal or organic cations with varying oxidation states; X = chalcogen or halogen anions) have gained interest for their excellent phase stability and compositional tunability. However, combinatorial possibilities arising from the many choices of A, B, and X site species, and their respective mixing fractions, a large number of possible ABX₃ perovskites remain undiscovered. In this work, we used machine learning (ML) methods to design new stable and …

Collection Of Instructional Slides From Molten Salt Electrochemistry Symposium (Moses), Devin Rappleye, Carlos Mejia

Faculty Publications

During the Molten Salt Electrochemistry Symposium (MoSES) on July 30-31, 2025, interactive instruction was given to the attendees including live demonstrations. These slides contain the introductory instructions given for each learning module at MoSES 2025. Please visit https://pyro.byu.edu/moses for more information.

Numerical Simulation Of The Pitting Corrosion Behavior Of Stainless Steel Bellows Influenced By Varying Liquid Film Thicknesses, Lu-Jun Ren, Guo-Min Li, Zhen-Xiao Zhu, Hai-Yan Xiong, Bing Li

Journal of Electrochemistry

To advance the understanding of the corrosion behavior of stainless steel bellows in marine atmospheric environments and enhance the precision of service life predictions, this study employs finite element simulations to investigate the pitting corrosion rates and pit morphologies of bellows peaks and troughs under varying electrolyte film thicknesses. The model incorporates localized electrochemical reactions, oxygen concentration, and homogeneous solution reactions. For improved computational accuracy, the fitted polarization curve data were directly applied as nonlinear boundary conditions on the electrode surface via interpolation functions. Simulation results reveal that the peak regions exhibit faster corrosion rates than the trough regions. With …

Regulating The Amount Of Graphene Oxide For Enhanced Capacitive Energy Storage Of Mof Derived Materials, Yong-Ji Qin, Jing-Quan Yang, Hao Wang, Mei-Ling Lian, Pei-Pei Jia, Jun Luo, Xi-Jun Liu, Jun-Feng Liu

Journal of Electrochemistry

In pursuit of more efficient and stable electrochemical energy storage materials, composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties. Graphene oxide (GO), a two-dimensional material with an extremely high specific surface area and excellent conductivity, offers new possibilities for enhancing the electrochemical performance of metal oxides. In this work, we synthesized metal- organic framework (MOF) and GO composites by regulating the amount of GO, and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process. Based on the …

Ionic Liquid Enhanced Proton Transfer For Neutral Oxygen Evolution Reaction, Ming-Xing Chen, Nian Liu, Zi-He Dua, Jing Qi, Rui Cao

Journal of Electrochemistry

The development of highly active catalyst in pH-neutral media for oxygen evolution reaction (OER) is critical in the field of renewable energy storage and conversion. Nevertheless, the slow kinetics of proton-coupled electron transfer (PCET) hinders the overall OER efficiency. Herein, we report an ionic liquid (IL) modified CoSn(OH)₆ nanocubes (denoted as CoSn(OH)₆-IL), which could be prepared through a facile strategy. The modified IL would not change the structural characteristics of CoSn(OH)₆, but could effectively regulate the local proton activity near the active sites. The CoSn(OH)₆-IL exhibited higher intrinsic OER performances than the pristine …

Detection Of Oil Pollution On The Tigris River In Iraq Using Fluorescence And Reflecting Techniques, Ahmad K. Ahmad, Thamer M. Mohammed

Karbala International Journal of Modern Science

In this study, a broadband light source (visible and ultraviolet) was used to name minerals via fluorescence spectra and estimate slick oil thickness, ranging from sub-millimetres, using the reflecting spectrum technique. Using a fluorescent technique, we obtained fluorescence spectra of the samples, converting and processing the signals to produce high-resolution data, which enabled the identification of the types of dissolved elements and oil slicks in the Tigris River, highlighting pollution sources and potential control measures. This system aims to show the faint signal in fluorescence samples collected from the cooling system outlet water throughout the refining process from AL-Dora (Baghdad) …

Modeling The Influence Of Silicon Content On Electrochemical Performance Of Silicon-Graphite Blended Electrodes Considering Voltage Hysteresis, Mohamed Atwair, Paul T. Coman, Ralph E. White

Faculty Publications

Silicon, with its high specific capacity, is a highly promising material for lithium-ion battery anodes. To enhance durability, it is commonly combined with graphite in composite anodes. Despite this, the electrochemical dynamics between silicon and graphite are not yet fully understood. Modeling serves as an important tool for analyzing and improving batteries, but current models lack comprehensive representation of the coupled electrochemical and structural behavior of silicon-graphite blended electrodes. Herein, we present a comprehensive model for blended Si/Gr electrodes that incorporates the distinct properties and kinetics of each material. Our approach accounts for the dependence of electrode thickness and solid …

Influence Of Zinc Oxide Nanoparticles On The Efficiency Of Oxytetracycline Removal From Wastewater Using Continuous Catalytic Ozonation, Sarmad Al-Anssari, Hassanain A. Hassan, Maha K. Mohsin, Ahmed A. Mohammed

Research outputs 2022 to 2026

Antibiotics must be fully eliminated before they are released into the environment. In most cases, conventional wastewater treatment systems are not built to handle polar microcontaminants such as antibiotics. Oxytetracycline (OTC) is one of these antibiotics, an environmental hazard contaminant in aqueous solutions. Therefore, an advanced treatment method is needed for wastewater contaminated with antibiotics. In this study, we employed zinc oxide nanoparticles (ZnO), and the catalytic ozonation procedure was employed to increase the ozonation efficiency. A continuous experiment was carried out to compare the effectiveness of catalytic and single ozonation in degrading OTC in a continuous reactor. The flow …

Modeling Self-Discharge In Li/S Batteries Through Electrochemical Anode Reactions: A Theoretical Perspective, Ralph E. White, Paul T. Coman

Faculty Publications

The growing demand for high-energy-density batteries has renewed interest in lithium–sulfur (Li/S) systems, which offer significant advantages but suffer from severe self-discharge during rest. While prior studies attribute this degradation to chemical parasitic reactions or polysulfide shuttling, they overlook the inherently electrochemical nature of anode-side processes. In this work, a 1D physics-based model of a Li/S battery was developed to explicitly incorporate lithium-metal oxidation and the stepwise electrochemical reduction of polysulfides at the anode. Using COMSOL Multiphysics, galvanostatic discharge followed by open-circuit rest under two conditions was analyzed - with and without parasitic anode reactions. The results show that when …

An Acoustofluidic Device For Sample Preparation And Detection Of Small Extracellular Vesicles, Jessica F. Liu, Jianping Xia, Joseph Rich, Shuaiguo Zhao, Kaichun Yang, Brandon Lu, Ying Chen, Tiffany Wen Ye, Tony Jun Huang

Faculty Publications

Small extracellular vesicles (sEVs) have emerged as powerful vectors for liquid biopsy, offering a noninvasive window into the dynamic physiological and pathological states of the body. However, to fully leverage the clinical potential of sEV biomarkers, it is imperative to develop robust and efficient technologies for their isolation and analysis. In this study, we introduce a novel sharp-edge acoustofluidic platform designed for rapid and effective sample preparation, coupled with sensitive detection of specific sEV populations based on their surface markers. Our approach utilizes acoustically activated sharp-edge microstructures to concentrate bead-bound sEVs within the microfluidic device, facilitating immediate visualization by fluorescence …