Chemical Engineering Commons^™

Comparative Kinetic Modeling Of Growth And Molecular Hydrogen Overproduction By Engineered Strains Of Thermotoga Maritima, Raghuveer Singh, Rahul Tevatia, Derrick White, Yaşar Demirel, Paul H. Blum

Department of Chemical and Biomolecular Engineering: Faculty Publications

Thermotoga maritima is an anaerobic hyperthermophilic bacterium known for its high amounts of hydrogen (H₂) production. In the current study, the kinetic modeling was applied on the engineered strains of T. maritima that surpassed the natural H₂ production limit. The study generated a kinetic model explaining H₂ overproduction and predicted a continuous fermentation system. A Leudking-Piret equation-based model predicted that H₂ production by Tma200 (0.217 mol-H₂ g^–1-biomass) and Tma100 (0.147 mol-H₂ g^–1-biomass) were higher than wild type (0.096 mol-H₂ g^–1 -biomass) with reduced rates of maltose utilization. …

A Critical Review Of Using High Viscosity Friction Reducers As Fracturing Fluids For Hydraulic Fracturing Applications, Mohammed Ba Geri, Abdulmohsin Imqam, Ralph E. Flori

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The primary purpose of using traditional friction reducers in stimulation treatments is to overcome the tubular drag while pumping at high flow rates. Hydraulic fracturing is the main technology used to produce hydrocarbon from extremely low permeability rock. Even though slickwater (water fracturing with few chemical additives) used to be one of the most common fracturing fluids, several concerns are still associated with its use, including usage of freshwater, high-cost operation, and environmental issues. Therefore, current practice in hydraulic fracturing is to use alternative fluid systems that are cost effective and have less environmental impact, such as fluids which utilize …

Polyvinylpyrrolidone - Reduced Graphene Oxide - Pd Nanoparticles As An Efficient Nanocomposite For Catalysis Applications In Cross-Coupling Reactions, Hany A. Elazab, Tamer T. El-Idreesy

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper reported a scientific approach adopting microwave-assisted synthesis as a synthetic route for preparing highly active palladium nanoparticles stabilized by polyvinylpyrrolidone (Pd/PVP) and supported on reduced Graphene oxide (rGO) as a highly active catalyst used for Suzuki, Heck, and Sonogashira cross coupling reactions with remarkable turnover number (6500) and turnover frequency of 78000 h-1. Pd/PVP nanoparticles supported on reduced Graphene oxide nanosheets (Pd-PVP/rGO) showed an outstanding performance through high catalytic activity towards cross coupling reactions. A simple, reproducible, and reliable method was used to prepare this efficient catalyst using microwave irradiation synthetic conditions. The synthesis approach requires simultaneous reduction …

Hydrothermal Synthesis Of Graphene Supported Pd/Fe 3 O 4 Nanoparticles As Efficient Magnetic Catalysts For Suzuki Cross – Coupling, Hany A. Elazab, Mamdouh A. Gadalla, Mohamed A. Sadek, Tamer T. El-Idreesy

Chemical and Biochemical Engineering Faculty Research & Creative Works

This research reports a reproducible, reliable, and efficient method for preparing palladium nanoparticles dispersed on a composite of Fe₃O₄ and graphene as an active catalyst with high efficiency for being used in Suzuki cross – coupling reactions. Graphene supported Pd/Fe₃O₄ nanoparticles (Pd/Fe₃O₄ /G) exhibit a remarkable catalytic performance towards Suzuki coupling reactions. Moreover, the prepared catalyst recyclability was up to nine times without losing its high catalytic activity. The catalyst was prepared using hydrothermal synthesis; the prepared catalyst is magnetic in order to facilitate catalyst separation out of the reaction medium …

Slightly Fluorination Of Al2o3 Ald Coating On Li1.2mn0.54co0.13ni0.13o2 Electrodes: Interface Reaction To Create Stable Solid Permeable Interphase Layer, Han Yu, Yan Gao, Xinhua Liang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Improving the performance of cathodes by using surface coatings has proven to be an effective method for improving the stability of Li-ion batteries (LIBs), while a high-quality film satisfying all requirements of electrochemical inertia, chemical stability, and lithium-ion conductivity has not been found. In this study, a composite film composed of Al₂O₃ and AlF₃ layers was coated on the surface of Li_1.2Mn_0.54Co_0.13Ni_0.13O₂ (Li-rich NMC) based electrodes by atomic layer deposition (ALD). By varying the ratio of Al₂O₃ and AlF₃, an optimal coating …

Well-Ordered Mesoporous Silica And Bioactive Glasses: Promise For Improved Hemostasis, Sara Pourshahrestani, Nahrizul Adib Kadri, Ehsan Zeimaran, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Immediate control of uncontrolled bleeding and infection are essential for saving lives in both combat and civilian arenas. Inorganic well-ordered mesoporous silica and bioactive glasses have recently shown great promise for accelerating hemostasis and infection control. However, to date, there has been no comprehensive report assessing their specific mechanism of action in accelerating the hemostasis process and exerting an antibacterial effect. After providing a brief overview of the hemostasis process, this review presents a critical overview of the recently developed inorganic mesoporous silica and bioactive glass-based materials proposed for hemostatic clinical applications and specifically investigates their unique characteristics that render …

The Effects Of Low Aspect Ratio And Heat Exchanging Internals On The Bubble Properties And Flow Regime In A Pilot-Plant Bubble/Slurry Bubble Column For Fischer-Tropsch Synthesis, Hayder Al-Naseri

Doctoral Dissertations

"Fischer-Tropsch synthesis (F-T) is a process utilized to convert the syngas mixture of CO and H₂ to synthetic fuel and chemicals that executed commercially by using the bubble/slurry bubble column reactor. The experimental results reveal that the investigated parameters, in terms the presence of internals, and reducing the aspect ratio and the solids loading, increase the local gas holdup, interfacial area, bubble passage frequency, and decrease the bubble rise velocity, bubble chord length. Meanwhile, the aspect ratio H/D = 4, and 5 provide enough height to established the fully developed flow regime. As a result of the variation in …

Using Fluorescence Spectroscopy To Determine Concentrations Of Quantum Dot Solutions, Cameron Sawyer

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Functionalizing Mica With Silanes Using Wet Chemistry, John Paul Stepnowski

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Cataloging The Degree Of Sensitization Via Electrochemical Reactivation For Studying The Corrosion Behavior Of Inconel 718, Austenitic, And Duplex Stainless Steels, Bradley Lynes

Williams Honors College, Honors Research Projects

Corrosion resistant materials can be expensive, but usually reduce the life cycle cost of metallic assets. However, negligent sensitization of these materials can lead to aggressive, intergranular corrosion. Using the methodology of the double loop electrochemical potentiokinetic reactivation (DL-EPR), this project investigates different steel reinforced bars and Inconel to determine the degree of sensitization after a heat treatment of 900°C for 2 hours. The purpose of this research is to validate and determine the appropriate test parameters for performing further DL-EPR test in the future. Additionally, the kinetics observed for each sample during the DL-EPR test will be analyzed and …

Developing A Portable Prototype To Utilize An Electrospun Colorimetric Sensor For The Detection Of Trihalomethanes In Water, Amanda Svensson

Williams Honors College, Honors Research Projects

Trihalomethane (THM) detection in water is important due to the potential health effects caused by their presence, including increased cancer risk. A cheap, quick, and portable method of identifying THM concentration at the Environmental Protection Agency limit of 80 parts per billion (ppb) will improve detection and water treatment. Electrospinning was used to make nanofiber membranes using a 2.6 wt% polypropylene solution. These membranes were utilized in the Fujiwara reaction, which creates a color change in the presence of THMs, to detect the THM bromoform in water. The color intensity of the reaction was quantified for 250 and 80 ppb …

Effects Of Hofmeister Ions On Transition Temperature Of Two Thermo-Responsive Polymers, Joshua Moser

Williams Honors College, Honors Research Projects

It was hypothesized that through the use of Hofmeister Ions, the lower critical solution temperature (LCST) of poly(vinyl methyl ether) (PVME) and poly(ethylene glycol)- poly(N-isopropylacrylamide) (PEG-b-pNIPAAm) block-copolymer could be controlled. Through literature searches and small lab experiments, our team found that there may be a connection between Hofmeister effects and phase transition of a thermo-responsive polymer. To try and prove this, the lab team decided to take four cations (Mg²⁺,Na⁺, Cs⁺, K⁺) in solution with the thermo-responsive polymers and compared their LCST to solutions of the thermo-responsive polymer in de-ionized …

Requalification Of Coated Fabrics Using Chemlok 2332 In Place Of Chemlok 233, Daniel Madler

Williams Honors College, Honors Research Projects

Rubber coated fabrics are an essential component in the deicing systems of the aerospace industry. Adhesives cements are applied to a fabric prior to being pressed into a rubber compound that will adhere to the fabric. The resulting fabric maintains the strength of the fabric with the added benefits of elasticity and compatibility from the rubber compound. UTC Aerospace Systems relies on these coated fabrics to create safe deicers for the aerospace industry. Chemlok 233, a now obsolete primer cement, was used extensively in the coated fabrics used by UTC. Materials testing and performance evaluation allowed for a replacement cement, …

Form Stable Phase-Change Materials, Russell Dent, Marjan Kashfipour, Nitin Mehra, Jiahua Zhu

Williams Honors College, Honors Research Projects

This work investigates the use of two different polyols, xylitol (Xyl) and erythritol (Ery), in conjunction with boron nitride (BN) aerogels, for the purpose of creating thermally conductive composites. While the BN filler in Xyl composites achieved a high anisotropic thermal conductivity of up to 4.53 W/m-K at 18.2 weight percent filler loading, they do not exhibit good phase-change material qualities due to a low solidification enthalpy even at low cooling rates. Alternatively, the BN-Ery composites have shown promising results with a solidification enthalpy of 225.14 J/g and a melting enthalpy of 385.84 J/g at a heat rate of 5 …

Multidimensional Mass Spectrometry Of Chemonic™ Ccg-6 Nonionic Surfactant With Separation By Polarity And Shape, Charles Johnson

Williams Honors College, Honors Research Projects

Chemonic™ CCG-6 surfactant is a water-soluble poly(ethylene glycol) (PEG) conjugated alkyl glyceride emollient. This surfactant exists as a complex mixture of a glycerol cores conjugated with poly(ethylene glycol) branches (PEGylation) that were partially esterified with caprylic (C8) and capric (C10) acids. These may be esterified on one, two, or all three arms of the glyceride. The architecture of the structures in this mixture was studied using multidimensional mass spectrometry (MS). Mass spectrometry was interfaced with ultra-performance liquid chromatography (UPLC) and ion mobility (IM) separation. The mixture was separated by reversed-phase LC, oligomers of the star-branched polymer were separated according to …

Prevention Of Harmful Algal Blooms By The Mitigation Of Phosphorus Nutrient Loading Via Filtration By Steel Wool And Activated Carbon, Ronald Simpson, Sara Kidd, Samantha Zidd

Williams Honors College, Honors Research Projects

Harmful Algal Blooms (HABs) are a devastating ecological and economic consequence of the abundance of nutrient-rich agricultural runoff entering aquatic ecosystems (Baker et al. 2014). Bio-available phosphorus from synthetic fertilizers is one of the major nutrients contributing to this global issue. Previous studies indicated that dissolved phosphorus can be removed from an aqueous environment when passed through a composite mixture of granular steel wool particles and activated carbon (Erickson, Gulliver, and Weiss, 2007). In this project, we conducted experiments using higher quality concentration measurements to determine what grades of steel wool (SW-0000, SW-000, SW-00) and types of activated carbon (granulated …

New Method Of Manufacturing Carbon Foam, Matthew D. Artimez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Carbon foam is a product that has some unique features. Carbon foam is a light weight material that has a high crush strength. It is electrically conductive, but because it is composed of air space between the tendrils, it is not a thermal conductor. Since it contains no volatile content, it is noncombustible. All these features allow carbon foam to have many modern applications. Currently, there are only three methods of producing carbon foam, and all three are not cost- efficient enough to meet the demand of potential new markets.

In this thesis, a new procedure of producing carbon foam …

Extraction Of Astaxanthin From Engineered Camelina Sativa Seed Using Ethanol-Modified Supercritical Carbon Dioxide, Liyang Xie, Edgar B. Cahoon, Yue Zhang, Ozan Ciftci

Department of Food Science and Technology: Faculty Publications

Natural astaxanthin, a high-value carotenoid that is currently extracted mainly from marine organisms, was extracted from engineered camelina seed using ethanol-modified supercritical carbon dioxide (SC-CO₂) for the first time, and compared with hexane and accelerated solvent extraction using hexane and ethanol. Response surface methodology (RSM) based on central composite rotatable design was employed to investigate the effect of pressure (30–45 MPa), temperature (40–60 °C), and ethanol concentration (10–35%, w/w). RSM-optimized conditions (41.6 MPa, 36.6 °C and 42.0% ethanol concentration) predicted the astaxanthin concentration as 437 μg/g oil, whereas the actual concentration was 421 ± 14 μg/g oil. Astaxanthin …

Reduction Of Nox Emissions In A Single Cylinder Diesel Engine Using Sncr With In-Cylinder Injection Of Aqueous Urea, Anthony Timpanaro

UNF Graduate Theses and Dissertations

The subject of this study is the effect of in-cylinder selective non-catalytic reduction (SNCR) of NO_x emissions in diesel exhaust gas by means of direct injection of aqueous urea ((NH₂)₂CO) into the combustion chamber. A single cylinder diesel test engine was modified to accept an electronically controlled secondary common rail injection system to deliver the aqueous urea directly into the cylinder during engine operation.

Direct in-cylinder injection was chosen in order to ensure precise delivery of the reducing agent without the risk of any premature reactions taking place. Unlike direct in-cylinder injection of neat water, …

Engineering Of Earth-Abundant Electrochemical Catalysts, Dylan D. Rodene

Theses and Dissertations

Alternative energy research into hydrogen production via water electrolysis addresses environmental and sustainability concerns associated with fossil fuel use. Renewable-powered electrolyzers are foreseen to produce hydrogen if energy and cost requirements are achieved. Electrocatalysts reduce the energy requirements of operating electrolyzers by lowering the reaction kinetics at the electrodes. Platinum group metals (PGMs) tend to be utilized as electrocatalysts but are not readily available and are expensive. Ni_1-xMo_x alloys, as low-cost and earth-abundant transition metal nanoparticles (NPs), are emerging as promising electrocatalyst candidates to replace expensive PGM catalysts in alkaline media. Pure-phase cubic and hexagonal Ni_{1-x …}

Process Synthesis And Design Of Integrated Biorefinery In Pulp And Paper Industry, Ghochapon Mongkhonsiri

Chulalongkorn University Theses and Dissertations (Chula ETD)

Integration of biorefinery into pulp and paper industry has been considered as sustainable development for pulp and paper industry and lignocellulosic biorefinery. High value-added biochemical, biofuel and bioenergy productions could be implemented into existing pulp mills by material and utility integration. A systematic methodology employing a superstructure-based process synthesis, process design and innovation is an effective approach to explore potential pathways for both economic and environmental sustainability with support from computer-aided tools. A superstructure of the multi-product biorefinery process network with the pulp and paper industry is developed and optimized with the objective to maximize profit. The synthesis results project …

Techno-Economic Feasibility Analysis Of Hydrogen Recovery In Bio-Hydrogenated Diesel From Palm Oil For Methanol Synthesis Via Aspen Plus, Nitipat Phichitsurathaworn

Chulalongkorn University Theses and Dissertations (Chula ETD)

A bio-hydrogenated diesel (BHD) or green diesel can be produced from refined palm oil obtained from palm oil refinery. A simulation model of BHD production process from palm oil is developed by Aspen Plus. The conventional process which is the heterogeneous catalytic hydro-deoxygenation reaction of triglycerides required high H2/oil volumetric ratio. To reduce high hydrogen loss in gaseous by-product, the design of hydrogen gas recovery process of the BHD process by coupling with methanol synthesis is proposed. The two processes (i.e., conventional BHD process and BHD process coupled with methanol synthesis) are compared in terms of hydrogen recovery and economic …

Pre-Feasibility Study Of Improving Quality Of Low-Grade Fluorite. A Case Study At Phanomthuan Deposit, Kanchanaburi, Thailand, Keosaychai Souvannavong

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this study was presented the pre-feasibility study of improving quality of low-grade fluorite from Phanomthuan deposit, Kanchanaburi province, Thailand. The purpose of this study aims to explore the optimal condition in order to remove the impurities which contained high SiO2, CaCO3 and other minerals, also evaluate the project in term of economic. Therefore, the improvement quality of fluorite by using froth flotation techniques was reach the ceramic grade. The raw material characterization contains CaF2 = 29.4 Wt.%, SiO2 = 43.9 Wt.% and CaCO3 = 6.9 Wt.%. After flotation process the optimal condition result which contains CaF2 = 96.46 Wt.%, …

Void Fraction Measurements In Large (0.3 M) Diameter Bubble Column Using Wire Mesh Sensor And Pressure Transducers- Effect Of Sparger, Afolabi Gabriel Ojo

Dissertations and Theses

The importance of the accurate temporal and spatial measurements of the two-phase flow parameters in bubble columns is very well known. The aim of this research work is to report the spatial measurements of the void fraction distribution in a 30 cm diameter cylindrical bubble column using Wire Mesh Sensor (WMS) tomography and Pressure Transducers. Pair of WMS sensors, with a 64×64 wire configuration of each sensor, were installed which are separated by a distance along the axis of the bubble column. Wire Mesh Sensors and PTs Data were collected for time-averaged and transient with a sampling frequency of 1000 …

Air Ingress And Heat-Driven Flow Relaminarization In A Very High Temperature Reactor (Vhtr), Apoorva Rudra

Dissertations and Theses

Very High Temperature Reactors (VHTRs) are one of six Generation IV reactors that have been proposed for DOE’s Next Generation Nuclear Plant. In addition to using gaseous coolants, VHTRs also display benefits of passive safety systems including intra-core natural circulation for heat removal in accident scenarios. However, a number of substantial engineering challenges are expected in VHTRs, and due to the high temperatures of the coolant involved, material behavior in various components needs to be better understood. Our work focuses mainly on two key phenomena that could lead to localized hot spots in the VHTR reactor core if not addressed …

Electrochemical Properties Of Crystalline Polymorphs Of Mno2 In Aluminum And Zinc Metal Batteries, Subhadip Pal

Dissertations and Theses

The widespread use of non-renewable fossil fuels has led to societal problems like global warming and climate change. Electrochemical energy storage can enable the integration of renewable energy sources that are inherently intermittent (solar, wind, etc.) into the electric grid, though major advances in cost, cycle life, and safety are necessary to have a global impact on the energy landscape. Both aluminium (Al) and zinc (Zn) metals are earth abundant, low-cost, safe, and exhibit high coulombic capacities, which make them promising electrode materials for “beyond lithium-ion” battery chemistries. However, the electrochemical feasibility and charge storage mechanisms of alternative Al and …

Void Fraction Measurements In A Large (0.3 M) Diameter Bubble Column Using Wire Mesh Sensors And Pressure Transducers: Effect Of Spargers, Afolabi G. Ojo

Dissertations and Theses

The importance of the accurate temporal and spatial measurements of the two-phase flow parameters in bubble columns is very well known. The aim of this research work is to report the spatial measurements of the void fraction distribution in a 30 cm diameter cylindrical bubble column using Wire Mesh Sensor (WMS) tomography and Pressure Transducers. Pair of WMS sensors, with a 64×64 wire configuration of each sensor, were installed which are separated by a distance along the axis of the bubble column. Wire Mesh Sensors and PTs Data were collected for time-averaged and transient with a sampling frequency of 1000 …

Intensification Of Gas Absorption In A Downward Flow Microbubble Bioreactor, Manizheh Ansari

Dissertations and Theses

Bioreactors are of interest for value-upgrading of stranded or waste industrial gases, such as CO, CH₄, or syngas. Process economics requires reduction of reactor cost and size while maintaining high production rate via rapid delivery of gas feedstock to the liquid phase which in turn requires a high volumetric mass transfer rate (). One strategy to achieve this goal is to increase interfacial area density, a, to >3000 m² m^-3, while minimizing use of energy. Here we show a novel reactor column design that uses a micro-jet array to break feedstock at ambient pressure …

Asphaltene Stability In Crude Oil During Carbon Dioxide Injection And Its Impact On Oil Recovery: A Review, Data Analysis, And Experimental Study, Sherif M. Fakher

Masters Theses

"Crude oils are usually associated with many compounds, some of which are favorable and others, which are not. One of the most unfavorable components of crude oil that pose severe operational problems and decreases oil production significantly are asphaltenes. These compounds are solids that are homogenized in the crude oil at room temperature but tend to separate from solution when agitated. They can deposit in the reservoir pores, wellbore, and transportation pipelines thus causing severe operational problems and oil recovery reduction.

Even though researchers have been studying asphaltenes for more than 100 years, there is still an ambiguity concerning asphaltene …

Performance Investigation Of Surface Modified Ceramic Microfiltration Membranes And The Effects Of Ionic Strength, Choji Bitrus Daches

Masters Theses

"The performance of ceramic membranes surface coated with cysteic acid to improve efficiency and reduce fouling rate was studied under two transmembrane pressure (TMP) and constant crossflow velocity (CFV). The filtration process was done in crossflow mode to allow for extended operation of the membranes. the performance of the membranes were determined in terms of the measured fluxes and on content rejection. Cleaning-in-place (CIP) was done on the membranes to ensure flux recovery after each run. The results showed significant improvement on the performance of the membranes with respect to high permeate fluxes and high oil content rejection (> 99.5%). …