Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 4801 - 4830 of 14265

Full-Text Articles in Chemical Engineering

Electrocatalytic Reduction Of Carbon Dioxide To Carbon Monoxide Using Cobalt Nitride, Chen Ma, Peng-Fei Hou, Peng Kang Aug 2019

Electrocatalytic Reduction Of Carbon Dioxide To Carbon Monoxide Using Cobalt Nitride, Chen Ma, Peng-Fei Hou, Peng Kang

Journal of Electrochemistry

Electrocatalytic reduction of carbon dioxide (CO2) is a promising method to alleviate global warming issues, although it still faces many challenges. Herein, we report cobalt nitride for electrocatalytic reduction of CO2 to carbon monoxide (CO) in an aqueous electrolyte. A comparison of catalysts with different preparation temperatures and atmospheres suggests that nitrogen doping is critical to improve catalytic activity. For the most active catalyst of 700-Co5.47N/C, the CO current density reached 9.78 mA·cm-2 at potential of -0.7 V vs. RHE. In addition, the CO/H2 ratio could be adjusted from 1:3 to 3:2 by …

Go to article

Preface To Special Issue Of Electrochemical Reduction Of Carbon Dioxide, Qing Li, Min Liu Aug 2019

Preface To Special Issue Of Electrochemical Reduction Of Carbon Dioxide, Qing Li, Min Liu

Journal of Electrochemistry

No abstract provided.

Go to article

Recent Advances In Bismuth-Based Co2 Reduction Electrocatalysts, Rui Zhou, Na Han, Yan-Guang Li Aug 2019

Recent Advances In Bismuth-Based Co2 Reduction Electrocatalysts, Rui Zhou, Na Han, Yan-Guang Li

Journal of Electrochemistry

Carbon dioxide (CO2) is an economical, secure and sustainable carbon resource around us. Its effective capture and recycling have been the focus of our entire society. Using the electrochemical method, CO2 can be reduced to different value-added chemicals or fuels. This approach not only would mitigate CO2 accumulation in the atmosphere, but also would help alleviate our dependence on fossil fuel. In this article, the basic principle and process of electrochemical CO2 reduction are first introduced. The recent development in bismuth-based catalysts for electrocatalytic CO2 reduction is reviewed with an emphasis on their preparation, …

Go to article

Regulation Of Copper Surface Via Redox Reactions For Enhancing Carbon Dioxide Electroreduction, Bao-Hua Hang, Jin-Tao Zhang Aug 2019

Regulation Of Copper Surface Via Redox Reactions For Enhancing Carbon Dioxide Electroreduction, Bao-Hua Hang, Jin-Tao Zhang

Journal of Electrochemistry

A large-scale application of fossil fuels has led to excessive emission of carbon dioxide (CO2), resulting in serious environmental issues. A promising path to reducing CO2 emissions is recycling CO2 into valuable chemicals and fuels through an electrochemical process. Herein, the redox reactions between copper (Cu) and ferric chloride (FeCl3) have been utilized to regulate the Cu surface composition and structure, aimed to improve the electrocatalytic activity toward CO2 reduction. Typically, a series of samples (named Cu-1h, Cu-2h, Cu-3h and Cu-4h) were prepared via the redox reactions for various time from 1 to …

Go to article

Preparations And Electrocatalytic Properties Of Cu-Bipy-Btc-Derived Carbon-Based Catalyst For Oxygen Reduction Reaction, Li-Hua Zhang, Jun-Feng Chen, Wan-Tang Huang, Yong-You Hu, Jian-Hua Cheng, Yuan-Cai Chen Aug 2019

Preparations And Electrocatalytic Properties Of Cu-Bipy-Btc-Derived Carbon-Based Catalyst For Oxygen Reduction Reaction, Li-Hua Zhang, Jun-Feng Chen, Wan-Tang Huang, Yong-You Hu, Jian-Hua Cheng, Yuan-Cai Chen

Journal of Electrochemistry

Efficient and low-cost oxygen reduction reaction (ORR) electrocatalyst plays a key role for fuel cells. In this paper, ORR active metal organic framework (MOF: Cu-bipy-BTC, bipy = 2,2?-bipyridine, BTC = 1,3,5-tricarboxylate) was prepared using hydrothermal method, and then carbon-based material MOF-800 was obtained from pyrolyzing Cu-bipy-BTC at 800 °C. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), nitrogen sorption isotherm and X-ray photolectron spectroscopy (XPS) were used to characterize the morphologies and structures of the catalysts. Linear sweep voltammetry (LSV) and current-time curve (i-t) were adopted to evaluate the electrocatalytic properties of the catalysts. The results …

Go to article

Methods For Estimating Supersaturation In Antisolvent Crystallization Systems, Jennifer M. Schall, Gerard Capellades, Allan S. Myerson Aug 2019

Methods For Estimating Supersaturation In Antisolvent Crystallization Systems, Jennifer M. Schall, Gerard Capellades, Allan S. Myerson

Henry M. Rowan College of Engineering Departmental Research

The mole fraction and activity coefficient-dependent (MFAD) supersaturation expression is the least-assumptive, practical choice for calculating supersaturation in solvent mixtures. This paper reviews the basic thermodynamic derivation of the supersaturation expression, revisits common simplifying assumptions, and discusses the shortcomings of those assumptions for the design of industrial crystallization processes. A step-by-step methodology for estimating the activity-dependent supersaturation is provided with focus on ternary systems. This method requires only solubility data and thermal property data from a single differential scanning calorimetry (DSC) experiment. Two case studies are presented, where common simplifications to the MFAD supersaturation expression are evaluated: (1) for various …

Go to article

Lactonic Sophorolipid Increases Surface Wettability Of Poly- L -Lactic Acid Electrospun Fibers, Alexis M. Ziemba, Keith P. Lane, Bailey Balouch, Anthony R. D'Amato, Filbert Totsingan, Richard A. Gross, Ryan J. Gilbert Aug 2019

Lactonic Sophorolipid Increases Surface Wettability Of Poly- L -Lactic Acid Electrospun Fibers, Alexis M. Ziemba, Keith P. Lane, Bailey Balouch, Anthony R. D'Amato, Filbert Totsingan, Richard A. Gross, Ryan J. Gilbert

Chemical and Biochemical Engineering Faculty Research & Creative Works

The hydrophobicity of electro spun poly-l-lactic acid (PLLA) fibers hinders their integration with surrounding tissue for a variety of applications. In this study, we increased PLLA fiber hydrophilicity by incorporating the natural surfactant, lactonic sophorolipid (LSL). PLLA+LSL fibers had similar fiber morphology but significantly greater surface wettability, which suggested LSL accumulation on the fiber surface. Differential scanning calorimetry results also suggested that LSL was phase separated from PLLA. Despite the altered surface wettability of these fibers, there was no change in fibroblast adhesion. Future studies may explore the use of this natural surfactant to deliver bioactive factors to enhance fibroblast …

Go to article

Incorporating Solvent-Dependent Kinetics To Design A Multistage, Continuous, Combined Cooling/Antisolvent Crystallization Process, Jennifer M. Schall, Gerard Capellades, Jasdeep S. Mandur, Richard D. Braatz, Allan S. Myerson Aug 2019

Incorporating Solvent-Dependent Kinetics To Design A Multistage, Continuous, Combined Cooling/Antisolvent Crystallization Process, Jennifer M. Schall, Gerard Capellades, Jasdeep S. Mandur, Richard D. Braatz, Allan S. Myerson

Henry M. Rowan College of Engineering Departmental Research

Combined cooling and antisolvent crystallization enables crystallization of many pharmaceutical products, but its process design typically neglects solvent composition influences on crystallization kinetics. This paper evaluates the influence of solvent-dependent nucleation and growth kinetics on the design of optimal, multistage mixed-suspension, mixed-product removal (MSMPR) crystallization cascades. The ability to independently select temperature and solvent compositions in each stage of the cascade serves to greatly expand the attainable region for a two-stage cascade, with diminishing returns for additional stages. Failure to include solvent-dependent kinetics can result in simulating incorrect attainable regions, active pharmaceutical ingredient (API) yields, and crystal size distributions. This …

Go to article

Phase Rule Classification Of Physical And Chemical Critical Effects In Liquid Mixtures, James K. Baird, Xingjian Wang, Joshua R. Lang, Pauline Norris Aug 2019

Phase Rule Classification Of Physical And Chemical Critical Effects In Liquid Mixtures, James K. Baird, Xingjian Wang, Joshua R. Lang, Pauline Norris

PRC-Affiliated Research

The isobaric heat capacity and the coefficient of thermal expansion of a binary liquid mixture with a critical point of solution diverge as functions of temperature in the critical region. When the same liquids are used as solvents for chemical reactions, the van't Hoff plot of the extent of reaction diverges in the critical region. According to the phase rule, the physical and chemical properties are isomorphic in the sense that in each case the critical behavior is determined by three fixed thermodynamic intensive variables.

Go to article

Phase Rule Classification Of Physical And Chemical Critical Effects In Liquid Mixtures, James K. Baird, Xingjian Wang, Joshua R. Lang, Pauline Norris Aug 2019

Phase Rule Classification Of Physical And Chemical Critical Effects In Liquid Mixtures, James K. Baird, Xingjian Wang, Joshua R. Lang, Pauline Norris

PRC-Affiliated Research

The isobaric heat capacity and the coefficient of thermal expansion of a binary liquid mixture with a critical point of solution diverge as functions of temperature in the critical region. When the same liquids are used as solvents for chemical reactions, the van't Hoff plot of the extent of reaction diverges in the critical region. According to the phase rule, the physical and chemical properties are isomorphic in the sense that in each case the critical behavior is determined by three fixed thermodynamic intensive variables.

Go to article

Phase Rule Classification Of Physical And Chemical Critical Effects In Liquid Mixtures, James K. Baird, Xingjian Wang, Joshua R. Lang, Pauline Norris Aug 2019

Phase Rule Classification Of Physical And Chemical Critical Effects In Liquid Mixtures, James K. Baird, Xingjian Wang, Joshua R. Lang, Pauline Norris

PRC-Affiliated Research

The isobaric heat capacity and the coefficient of thermal expansion of a binary liquid mixture with a critical point of solution diverge as functions of temperature in the critical region. When the same liquids are used as solvents for chemical reactions, the van't Hoff plot of the extent of reaction diverges in the critical region. According to the phase rule, the physical and chemical properties are isomorphic in the sense that in each case the critical behavior is determined by three fixed thermodynamic intensive variables.

Go to article

Computational And Experimental Approach To Understanding The Structural Interplay Of Self-Assembled End-Terminated Alkanethiolates On Gold Surfaces, Juganta K. Roy, Erick S. Vasquez, Henry P. Pinto, Swati Kumari, Keisha B. Walters, Jerzy Leszcynski Aug 2019

Computational And Experimental Approach To Understanding The Structural Interplay Of Self-Assembled End-Terminated Alkanethiolates On Gold Surfaces, Juganta K. Roy, Erick S. Vasquez, Henry P. Pinto, Swati Kumari, Keisha B. Walters, Jerzy Leszcynski

Chemical and Materials Engineering Faculty Publications

Applications of self-assembled monolayers (SAMs) on surfaces are prevalent in modern technologies and drives the need for a better understanding of the surface domain architecture of SAMs. To explore structural interaction at the interface between gold surfaces and a hydroxyl-terminated alkanethiol, 11-hydroxy-1-undecanethiol, (C11TH) we have employed a combined computational and experimental approach. Density functional theory (DFT) calculations were carried out on the thiol–gold interface using both the Perdew–Burke–Ernzerhof (PBE) and van der Waals (optB86b) density functionals. Our ab initio molecular dynamics (AIMD) simulations revealed that the interface consists of four different distinguished phases, each with different C11TH orientations. Experiments involved …

Go to article

Multiphase Cfd Modeling In Particle-Laden Flows, Zhizhong Ding Aug 2019

Multiphase Cfd Modeling In Particle-Laden Flows, Zhizhong Ding

LSU Doctoral Dissertations

Multiphase modeling is prevalent and useful in solving problems involving multiphase interactions such as fluid and solid. Applications conclude but not limited to fluidized bed, hydraulic conveying, and many others. Modeling techniques with multiple scales can provide various states of details with diverse computational resources used. In this dissertation, two CFD multiphase models are used to disclose interaction details in the particulate system. Two-Fluid Model is used to solve pulsed fluidized bed problem and immersed boundary method based direct numerical method is used to solve particle’s behavior in shear flow. Getting a better understanding of these problems to help to …

Go to article

Catalyst-Assisted Transformation Of Shale Gas To Transportation Fuels: Performance Of A Single-Site Cobalt Catalyst In Dehydrogenation And Oligomerization Processes, Ethan Edwards Aug 2019

Catalyst-Assisted Transformation Of Shale Gas To Transportation Fuels: Performance Of A Single-Site Cobalt Catalyst In Dehydrogenation And Oligomerization Processes, Ethan Edwards

The Journal of Purdue Undergraduate Research

No abstract provided.

Go to article

Role Of Submicrometer Particles In Advanced Technologies Of Carbon Capture, Zhichao Li Aug 2019

Role Of Submicrometer Particles In Advanced Technologies Of Carbon Capture, Zhichao Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

Oxy-combustion and post-combustion carbon capture technologies are two of the most promising strategies for carbon capture and storage (CCS), which is a commonly accepted approach to address the challenge of climate change. Pressurized oxy-combustion has been actively studied due to its great potential to enhance the power plant energy efficiency by recovering latent heat from water vapor condensation without incurring additional gas compression cost. On the other hand, amine-based CO2 scrubbers have been demonstrated to have high removal efficiency of CO2 with the possibility to recycle amine solutions, which makes the technology a promising candidate for post-combustion carbon capture. Nonetheless, …

Go to article

Role Of Submicrometer Particles In Advanced Technologies Of Carbon Capture, Zhichao Li Aug 2019

Role Of Submicrometer Particles In Advanced Technologies Of Carbon Capture, Zhichao Li

McKelvey School of Engineering Graduate Student Theses & Dissertations

Oxy-combustion and post-combustion carbon capture technologies are two of the most promising strategies for carbon capture and storage (CCS), which is a commonly accepted approach to address the challenge of climate change. Pressurized oxy-combustion has been actively studied due to its great potential to enhance the power plant energy efficiency by recovering latent heat from water vapor condensation without incurring additional gas compression cost. On the other hand, amine-based CO2 scrubbers have been demonstrated to have high removal efficiency of CO2 with the possibility to recycle amine solutions, which makes the technology a promising candidate for post-combustion carbon capture. Nonetheless, …

Go to article

Evaluation Of Biodegradability Characteristics Of Cellulose-Based Film As Per Is/Iso 14855-1, Narayan C. Saha Dr, Gaurav Madhu Dr, Diksha B. Kadu Ms Aug 2019

Evaluation Of Biodegradability Characteristics Of Cellulose-Based Film As Per Is/Iso 14855-1, Narayan C. Saha Dr, Gaurav Madhu Dr, Diksha B. Kadu Ms

Journal of Applied Packaging Research

Biodegradable polymers (especially those derived from plant sources) begin their lifecycle as renewable resources, usually in the form of starch or cellulose. In this paper, the evaluation of biodegradability of cellulose-based polymer film under controlled composting conditions as per the guidelines of IS/ISO 14855 (Part-1) standard has been described. Microcrystalline cellulose (MCC) powder was taken as positive-control polymer. The apparatus used to analyse the degree and rate of biodegradation was developed indigenously. The validation of the biodegradability testing apparatus was also performed as per the prescribed test method given in IS/ISO 14855-1.

Go to article

Synthesis, Characterization And Selected Application Of Chitosan-Coated Magnetic Iron Oxide Nanoparticles, Hany A. Elazab Dr Aug 2019

Synthesis, Characterization And Selected Application Of Chitosan-Coated Magnetic Iron Oxide Nanoparticles, Hany A. Elazab Dr

Chemical Engineering

In this research, we report an efficient method to prepare highly active chitosan-coated magnetic iron oxide nanoparticles by implementing co-precipitation technique which is used for waste water treatment applications. Chitosan-coated magnetic iron oxide nanoparticles were synthesized and characterized using TEM, XRD, and XPS. A comparative study has been made between chitosan powder and chitosan coated with magnetic nanoparticles with respect to the rate of adsorption of copper from aqueous solution. It was also experimentally verified that chitosancoated magnetic iron oxide nanoparticles are much more effective in adsorption of heavy metals than chitosan powder and it takes just few minutes instead …

Go to article

Synthesis And Characterization Of Dinitro Pentamethylene Tetramine (Dpt), M. M. Seleet, S. A. Hassanien, M. A. Radwan, M. A. Sadek Aug 2019

Synthesis And Characterization Of Dinitro Pentamethylene Tetramine (Dpt), M. M. Seleet, S. A. Hassanien, M. A. Radwan, M. A. Sadek

Chemical Engineering

Preparation of dinitro pentamethylene tetramine (DPT) through the action of nitrating mixture formed of ammonium nitrate and fuming nitric acid on hexamine in presence of acetic acid, acetic anhydride and p-formaldehyde has been carried out. DPT was also prepared from hexamine dinitrate which is an important intermediate appears through preparation of DPT from hexamine directly. Prepared DPT was purified and then characterized through the determination of melting point, element test, FTIR spectrometry, UV spectrometry, and high performance liquid chromatography "HPLC". The obtained results were reliable and consistent with the literature.

Go to article

Investigation Of The Electrode Polarization Effect For Biosensor Applications, Anil Koklu Aug 2019

Investigation Of The Electrode Polarization Effect For Biosensor Applications, Anil Koklu

Mechanical Engineering Research Theses and Dissertations

My research focuses on electrokinetic transport. Particularly, in this dissertation, we focus on fabrication and testing of micro electrodes with nanostructured surfaces to minimize the electrode polarization (EP) effects for biosensor applications. In the first study, electrochemical deposition of gold nanoparticles on to planar gold electrodes was used to generate rough surfaces. Dendritic nanostructures that reduced EP up to two orders of magnitude was obtained by optimizing the deposition conditions. These structures also enhanced dielectrophoresis (DEP) response of our bio-chips, making them usable in physiological buffers. In further studies we discovered a universal scaling of EP in the frequency domain, …

Go to article

A Study Of The Electron Regeneration Efficiency Of Solar Cells Fabricated Using Cmc/Pva-, Alginate-, And Xanthan-Based Electrolytes, Nur Farha Shaafi, Saifful Kamaluddin Muzakir, Bouchta Sahraoui Aug 2019

A Study Of The Electron Regeneration Efficiency Of Solar Cells Fabricated Using Cmc/Pva-, Alginate-, And Xanthan-Based Electrolytes, Nur Farha Shaafi, Saifful Kamaluddin Muzakir, Bouchta Sahraoui

Makara Journal of Technology

A photovoltaic (PV) mechanism consists of three important steps, i.e., (i) electron excitation upon absorption of photon with energy higher than the bandgap of fluorophore, (ii) excited-state electron injection from the fluorophore to the pho-toelectrode, and (iii) electron regeneration from the electrolyte to the fluorophore. An efficient electron regeneration could be achieved upon fulfillment of the requirements of energy alignment, i.e., lowest unoccupied molecular orbital of fluorophore (LUMOfluorophore) > redox potential of electrolyte > highest occupied molecular orbital of fluorophore (HOMOfluorophore). This study investigated the electron regeneration efficiency of excitonic solar cells fabricated using three polymer-based electrolytes, i.e., (i) 60% carboxymethyl cellulose …

Go to article

Study Of Ecological Design Of Residential Complexes Using Spss To Elevate Resident Satisfaction, Soheil Malekpour Kolbadinejad, V. Malekpour Ravasjan, A. Darvish Aug 2019

Study Of Ecological Design Of Residential Complexes Using Spss To Elevate Resident Satisfaction, Soheil Malekpour Kolbadinejad, V. Malekpour Ravasjan, A. Darvish

Makara Journal of Technology

This article reports the general residential satisfaction, affecting ecological factors, and their importance in area in Tehran. The collected field data was analyzed using SPSS. Cronbach's alpha variable was used to determine the reliability of the questionnaire and the Friedman test was used to assess priorities that influence residential satisfaction. The results show that the quality of residential environments and general satisfaction of their residents may be enhanced by identifying these criteria and making appropriate plans for their improvement.

Go to article

Adsorption Of Heavy Metal Ions By Oil Palm Decanter Cake Activated Carbon, Mohd. Ezreeza Mohamed Yusoff, Juferi Idris, Nahrul Hayawin Zainal, Mohamad Faizal Ibrahim, Suraini Abd-Aziz Aug 2019

Adsorption Of Heavy Metal Ions By Oil Palm Decanter Cake Activated Carbon, Mohd. Ezreeza Mohamed Yusoff, Juferi Idris, Nahrul Hayawin Zainal, Mohamad Faizal Ibrahim, Suraini Abd-Aziz

Makara Journal of Technology

Adsorption processes are widely used for the removal of heavy metals from waste streams. Oil palm decanter cake (OPDC) is used as a bioadsorbent because of its compositional properties for activated carbon production; moreover, it is a readily available raw material produced in palm oil mills and is thus abundant and cheap. In this study, the OPDC was carbonized at 700 °C and activated using steam at 700 °C to produce oil palm decanter cake activated carbon (AC-OPDC). Batch adsorption experiments were carried out to compare the adsorption capacities of the raw OPDC and the AC-OPDC for heavy metals removal. …

Go to article

Use Of The “Dnachecker” Algorithm For Improving Bioinformatics Research, Nausheen Bhat, Ezra Bernadus Wijaya, Arli Aditya Parikesit Aug 2019

Use Of The “Dnachecker” Algorithm For Improving Bioinformatics Research, Nausheen Bhat, Ezra Bernadus Wijaya, Arli Aditya Parikesit

Makara Journal of Technology

Basic Local Alignment Sequencing Tool (BLAST) is a bioinformatics tool used for analyzing nucleotide sequences with regards to their similarity. BLAST can be found online on biological databases such as the National Center for Biotechnology Information (NCBI) and other such repositories. The mechanism of BLAST allows the target sequence to be compared with other sequences to find regions of local similarity, and thus, a comparability quotient that determines the resemblance between the sequences is created. Due to the open-platform nature of the online databanks, several sequences can be accepted with little to no interjections regarding the quality of sequence submitted. …

Go to article

Component Analysis And Antiangiogenic Activity Of Thailand Stingless Bee Propolis, Eriko Ishizu, Sari Honda, Tosihro Ohta, Boonyadist Vongsak, Shigenori Kumazawa Aug 2019

Component Analysis And Antiangiogenic Activity Of Thailand Stingless Bee Propolis, Eriko Ishizu, Sari Honda, Tosihro Ohta, Boonyadist Vongsak, Shigenori Kumazawa

Makara Journal of Technology

Propolis is a natural resin produced by honey bees from certain plants, has gained popularity as a food and alternative medicine. However, to the best of our knowledge, few studies on native Thailand stingless bee propolis are available. Information on the chemical composition and biological activities of propolis is needed to investigate its potential utility. Recently we have reported the possible plant origin of Thailand stingless bee propolis, Garcinia mangostana. In this study, further component analysis, functional evaluation, and identification of the plant origin of Thailand stingless bee propolis are conducted. Nine xanthones, including α-mangostin, garcinone C, γ-mangostin, cochinchinone T, …

Go to article

3d Fdtd Method For Modeling Of Seismo-Electromagnetics Disturbance On Crustal Earth, Nabila Husna Shabrina, Yasuhide Hobara, Achmad Munir Aug 2019

3d Fdtd Method For Modeling Of Seismo-Electromagnetics Disturbance On Crustal Earth, Nabila Husna Shabrina, Yasuhide Hobara, Achmad Munir

Makara Journal of Technology

The paper deals with the modelling of seismo-electromagnetics disturbance on the crustal earth by use of threedimensional (3D) finite-difference time-domain (FDTD) method. The model is built up by discretizing the frontier geographical region between Java Island and Sumatra Island in a cylindrical coordinate system-based 3D object. The proposed method is applied to compute and analyze electromagnetics (EM) fields of the observed very low frequency (VLF) wave used for the investigation. Boundary condition of uniaxial perfectly matched layer (UPML) are applied surrounding the area of computation for truncating the object of simulation. The investigation are focused on the propagation time of …

Go to article

Experimental Evaluation Of Three Different Humidity Conditions To Physical And Mechanical Properties Of Three Different Mixtures Of Unfired Soil Bricks, Heru Purnomo, Srikandi Wahyu Arini Aug 2019

Experimental Evaluation Of Three Different Humidity Conditions To Physical And Mechanical Properties Of Three Different Mixtures Of Unfired Soil Bricks, Heru Purnomo, Srikandi Wahyu Arini

Makara Journal of Technology

Unfired brick is considered as a more environmentally friendly material than fired brick. It has lower mechanical properties than that of fired brick where humidity influences both bricks. Physical and mechanical properties of unfired bricks made of three kinds of mixtures were studied experimentally under three humidity conditions. The first kind of unfired brick was made only with soil and water while the second type was made of a mixture of soil, water and lime, and the third type was a mixture of soil, water, lime and uniform treated coir where 4% of lime mass was substituted with coir mass. …

Go to article

Fluid Flow Analysis Of Diluted Evaporating American Whiskey Droplets., Martin J. Brown Vi Aug 2019

Fluid Flow Analysis Of Diluted Evaporating American Whiskey Droplets., Martin J. Brown Vi

Electronic Theses and Dissertations

The recent discovery of the unique structures, whiskey webs, formed when the evaporation of diluted American whiskey, has raised many questions as to the nature of the structures. Their formation process follows as such: (1) dilution of the whiskey to form nanoaggregates, (2) formation of a monolayer at the air-liquid interface, (3) chaotic ethanol evaporation caused monolayer collapse (via dynamic pressure), (4) bulk fluid evaporation caused monolayer collapse (via reduction of surface area), where the web-like structures reside on the surface, and finally, (5) web-like structures deposit on the substrate. The webs imaged via SEM had a striking resemblance to …

Go to article

Development Of A Methodology For Characterizing Reaction Kinetics, Rheology, And In-Situ Compaction Of Polyimide Prepregs During Cure, James Raymond Magato, Donald A. Klosterman Aug 2019

Development Of A Methodology For Characterizing Reaction Kinetics, Rheology, And In-Situ Compaction Of Polyimide Prepregs During Cure, James Raymond Magato, Donald A. Klosterman

Chemical and Materials Engineering Faculty Publications

PMR-type polyimide prepregs are challenging to fabricate into high quality composites due to volatiles that are generated and must be removed in situ during processing. The current work was conducted to develop accurate, reliable, and practical characterization techniques of the prepreg rheology, volatile generation, and subsequent volatile removal from the prepreg during composite fabrication. Thermal analysis was used to characterize volatile generation, reaction rates, and rheology. A novel approach was used to measure the thickness of the prepreg in situ during vacuum bag/oven processing using a high-temperature LVDT. Experimental results are presented for the commercially available RM-1100 polyimide/carbon prepreg system, …

Go to article

Bioengineering Extracellular Matrix Scaffolds For Volumetric Muscle Loss, Kevin Roberts Aug 2019

Bioengineering Extracellular Matrix Scaffolds For Volumetric Muscle Loss, Kevin Roberts

Graduate Theses and Dissertations

Volumetric muscle loss overwhelms skeletal muscle’s ordinarily capable regenerative machinery, resulting in fibrosis and severe functional deficits which have defied clinical repair strategies. My work spans the design and preclinical evaluation of implants intended to drive the cell community of injured muscle toward a regenerative state, as well as the development of an understanding of the molecular responses of this cell community to biomaterial interventions. I demonstrate a new class of biomaterial by leveraging the productive capacity of sacrificial hollow fiber membrane cell culture; I show specifically that unique threads of whole extracellular matrix can be isolated by solvent degradation …

Go to article

First Prev Next Last