Chemical Engineering Commons^™

Investigation Of Some Physical Properties Of Slurry Infiltrated Fibrous Concrete (Sifcon) Under Different Curing Times, Rand Kh. Mahmoud, Mohmmed Juad Khadhim, Fayq Hasan Jabbar

Al-Esraa University College Journal for Engineering Sciences

This research studied the effects of different types fibers (Basalt, Carbon and Basalt-Carbon hybrid mix) and curing ages (7, 14, 28 and 56 days) on some physical properties of - Slurry infiltrated fibrous concrete (SIFCON). Density, ultrasonic pulse velocity UPV, Poisson’s ratio and water absorption were measured for the experimental study with 30% cement replacement by Class F fly ash to increase sustainability. It was found that properties were significantly affected by the type and dosage of fiber admixture. The UPV was enhanced by basalt fibers and the absorption reduced up to an optimal range of 3–5% after which agglomeration …

A Novel Rheological Technique To Measure The Yield Stress In Equibiaxial Elongation, Asher Segal

Theses

Yield stress measurement in non-Newtonian fluids, particularly under complex flow conditions such as equibiaxial elongation, remains a significant challenge in experimental rheology. This work presents the development of a novel method, Continuous Lubricated Squeezing Flow (CLSF), designed to quantify the normal yield stress of viscoelastic materials while minimizing boundary artifacts.

The CLSF method was implemented and validated using Carbopol 940, a model yield-stress gel, at concentrations of 1 wt% and 2 wt%. Comparative shear rheology was first performed to establish baseline yield stresses and verify sample integrity. CLSF experiments were then conducted over controlled flow rate increments and gap distances …

Mechanical And Durability Properties Of Cement Panels Reinforced With Hybrid And Pva Fibers, Shukran H. Faraj, Mohammed J. Kadhim

Al-Esraa University College Journal for Engineering Sciences

This study examines the synergistic effects of hybrid fibers (HF) and polyvinyl alcohol (PVA) fibers on the structural and thermal properties of silica-fume cement panels. Scanning electron microscopy (SEM) was employed to examine mortar mixtures with varying fiber content to assess their enhancement of microstructure. We conducted several experiments on compressive, flexural, and splitting tensile strength, in addition to water absorption and thermal conductivity. The results indicate that 1% HF exhibits superior mechanical qualities, with a compressive strength of 46.89 MPa, a flexural strength of 8.56 MPa, and a reduced thermal conductivity of 0.83 W/m•K. PVA fibers at 2% enhance …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …

Numerical Modeling And Experimental Validation Of A High-Temperature Latent Heat Thermal Energy Storage System Using Metallic Phase Change Materials For Concentrated Solar Power Applications, Fouad Hashim Sharhan

Al-Esraa University College Journal for Engineering Sciences

To ensure reliable performance for the power-block of CSP plants, high power density and near-isothermal discharge must be achieved. A robust means of achieving this is through thermal energy storage (TES). High temperature latent heat storage (LHS) with phase change materials (PCMs) can serve these purposes, however the conventional salts used in PCMs typically suffer from low thermal conductivity that limits power density and increases energy storage charging/discharging times. This manuscript investigates ways to address these limitations using high temperature metallic phase change materials (MPCMs) while also developing a validated numerical framework to aid in their design. To this end, …

Thermal Performance Evaluation Of Solar Cooling Systems For Educational Facilities In Baghdad, Yasser Alawi Mohammed Attia Al-Jubouri

Al-Esraa University College Journal for Engineering Sciences

Schools in Baghdad also suffer from poor thermal comfort, which is a common problem in high-temperature and low-humidity arid climates such as that of the city, where using cooling devices leads to a large energy demand and overloads on the national power grid. Such study offers a thorough assessment of the thermal performance of solar-based cooling systems in an efficient manner to be suitable for educational buildings in Baghdad. The analysis is centred on a solar thermal cooling system with absorption as the heat interaction medium, and an experimental characterisation and mathematical simulation itself are performed. A pilot installation, consisting …

Bio-Papcz: Corn Starch-Based Composite Bioplastic Reinforced With Pineapple Leaf Fiber (Palf), Zinc Oxide (Zno), And Polyvinyl Alcohol (Pva), Marvin C. Caya, Shervin Austin C. Huang, Jovar Khalel J. Maghari, Ruel M. Levida

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Plastic pollution poses a serious global threat, as petroleum-based plastics persist for centuries, and their surging production of over 450 million tons overwhelms ecosystems (Ritchie et al., 2023). Using a quantitative experimental research design, the study examined the effects of varying concentrations of cornstarch-based bioplastic reinforced with pineapple leaf fiber (PALF), polyvinyl alcohol (PVA), and zinc oxide (ZnO) on the bioplastic’s tensile strength and soil degradability. Sample C2 (ZnO 3.0 %w/w; PVA 9.0 %w/w) demonstrated the optimal tensile properties with a tensile strength of 0.76 MPa and an elongation at break of 6.40%, which was attributed to the addition of …

Curing Duration Optimization To Reduce Shrinkage Cracking In One-Part Alkali-Activated Slag Concrete, A. Sadrmomtazi, H. Zanganeh

Journal of Sustainable Construction Materials and Technologies

The consequences of inadequate curing on one-part alkali-activated slag concrete (O-AAS) performance relative to ordinary Portland cement concrete (OPCC) have been investigated in this research. Prior to exposure to unsaturated conditions, samples underwent initial moist curing for durations ranging from 24 hours to one year. The testing program included compressive strength evaluation, chloride ion transport analysis, and measurement of free and restrained shrinkage. In addition, cylindrical cores were extracted from concrete columns to assess internal strength and chloride penetration resistance. Under unsaturated exposure, O-AAS exhibited a strength-aging phenomenon, with up to a 37% decrease in compressive strength over 360 days, …

Laboratory Investigation And Numerical Modelling Effect Of Carbon Nanotubes On Hot Mix Asphalt Permanent Displacement, Sepehr Saedi, Auwal Usman Nadada

Journal of Sustainable Construction Materials and Technologies

One of the primary causes of asphalt pavement deterioration is rutting; in contrast, one of the most effective methods to address this type of damage is the use of additives and quality evaluation during the design stages. In this research, laboratory testing and modeling using Abaqus software were employed to validate the laboratory results and predict and assess the potential for rutting. Carbon nanotubes (CNTs) were selected as an additive due to their exceptional mechanical properties and molecular interactions with bitumen. These nanotubes were used to modify the bitumen for the preparation of laboratory samples. The laboratory results from the …

Influence Of Early Microwave Curing On Performance Of Slag-Based Geopolymer Mortars, Ahmet Taşdemı̇R, Abdulkadir Çevı̇K

Journal of Sustainable Construction Materials and Technologies

In this article, an experimental study was conducted to examine the effect of curing time and microwave power on the compressive strength of early microwave-cured slag based geopolymers. Geopolymers have the potential to serve as an environmentally friendly substitute for cement-based building materials, and the use of microwave curing to geopolymers holds the promise of substantial strength improvement. Different microwave curing energies (300 - 800 Watts) were utilized at varying durations (10 - 60 minutes) on demoulded mortar specimens after one day. After that, compressive strength tests were conducted on both the cured and uncured specimens at three different ages: …

Synthesis Of Schiff Base Based On Aminopolysaccharides A Chitosan Apis Mellifera With Salicylic And Glutaraldehydes, Alisher Mengliev

Technical science and innovation

Chitosan is a linear aminopolysaccharide. Using methods of chemical modification of chitosan, a number of new biologically active materials have been created. The main interest in these products is due to the preservation of the basic physicochemical and biological properties of the original polymer and the acquisition of new properties depending on the nature of the introduced groups. Modified chitosan can be used in various fields such as drug delivery, textiles, wastewater treatment and a number of biomedical applications. The purpose of this work is to extract chitosan from the remains of ApisMellifera bees and synthesize a Schiff base with …

Two Members Of The Editorial Board Of Journal Electrochemistry, Kai Wu Elected As An Academician Of The Chinese Academy Of Engineering And Yi Cui A Foreign Academician Of The Chinese Academy Of Sciences, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Electrochemical Characterization And Modulation Of Biological Processes, Yue-Qi Li, Wei-Hua Huang, De-Chen Jiang, Bao-Hong Liu, Bin Su, Yang Tian, Jing-Juan Xu, Ping Yu, Feng Zhao, Huang-Xian Ju, Jing-Hong Li

Journal of Electrochemistry

Electrochemical processes lie at the core of biological function, governing energy transduction, metabolic flux, and molecular signaling. Recent advances in electrochemical science now allow these processes to be probed and controlled with unprecedented spatial, temporal, and chemical resolution. In this review, we present an integrated framework that progresses from fundamental mechanisms to analytical technologies and functional modulation. We begin by outlining electron transfer pathways in mitochondrial respiration, microbial extracellular electron transfer, and DNA- and protein-based charge conduction, followed by the principles of photon-electron conversion in photosynthesis and the central role of redox equilibrium in coordinating cellular responses. We then highlight …

A Novel Electrolyte Pyridine Additive For Enhancing Cycle Life Of Lithium-Ion Batteries, Peng-Cheng Wang, Ding-Chang Li, Jun-Tao Li, Guang-Bo Lu, Shi-Wen Wang

Journal of Electrochemistry

Lithium-ion (Li-ion) battery using a graphite (Gr.) anode and a lithium iron phosphate (LiFePO₄, LFP) cathode (Gr.||LFP) has been widespread in energy storage. To match the warranty period of energy storage systems, the lifespan of this kind of Li-ion battery, not only under room temperature but also under relatively high temperature, is critical. Exploration of functional electrolyte additive provides an efficient approach to address this issue. This study reports the usage of pyridine (Py) as a new electrolyte functional additive for Gr.||LFP. In the first cycle, it was found that Py can be reduced before ethylene carbonate and …

Journal Of Electrochemistry Officially Indexed By Leading Oa Databases Oarl And Coaj, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Feature Column Of Journal Of Electrochemistry Nominated For 2025 Top 10 Famous Columns Of Fujian Provincial Newspapers And Periodicals, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Improvement Of Technology And Control And Management Systems Of The Plant Oil Refination Process, Elyor Samadov

Chemical Technology, Control and Management

The article examines modern approaches to modernizing vegetable oil refining processes from the perspective of increasing energy efficiency, environmental friendliness, and final product quality. Traditional and innovative technologies are analyzed, with a focus on the implementation of membrane filtration, automated control systems, heat exchange complexes, and renewable energy sources. It has been shown that the use of intelligent control systems, high-precision membrane filters, and heat regeneration allows for a 25% reduction in energy consumption, a 20% reduction in greenhouse gas emissions, and a significant improvement in acidity, color, and impurity content in the product. The obtained results show the effectiveness …

Analog Systems Of Physical Quantities And Their Graph Models In Determining The Parameters Of Mechatronic Modules, Temurbek Omonboevich Rakhimov, Elmira Eshmurod Qizi Raxmanova, Guzal Khujaniyazova

Chemical Technology, Control and Management

This article is dedicated to the analogy systems of physical quantities and their graph models in determining the parameters of mechatronic modules. It presents the general sets and fundamental laws of analogy systems of physical quantities and their elements for determining the parameters of mechatronic modules. Based on the general sets and fundamental laws of analogy systems of physical quantities and their elements, principles have been developed for mechatronic modules with a heterogeneous structure consisting of electrical, magnetic, and mechanical parts. In these modules, the field as a form of matter exists, forming the basis for developing mathematical models to …

Improving Self-Diagnostic Methods Of Flow Measurement Systems Based On Artificial Intelligence, Elbek Ortikov

Chemical Technology, Control and Management

The article examines methods for improving self-diagnostics of consumption measurement systems based on artificial intelligence in the context of industry digitalization and the development of cyber-physical systems. It has been shown that traditional flow meters used to measure the flow rate of liquids and gases are subject to mechanical, hydraulic, electronic, and hidden failures, which reduce the accuracy and reliability of measurements. A justification for the need to transition from classical maintenance methods to intelligent self-control methods that ensure the detection of anomalies and hidden malfunctions in real time is presented. A multi-level architecture of intelligent self-diagnosis is proposed, including …

Performance Assessment Of Operators Under Digital Simulator-Based Training In Automated Industrial Systems, Kamola Abdullaeva

Chemical Technology, Control and Management

This article proposes a comprehensive approach to training process operators, based on computer simulators integrated with digital twins, SCADA/DCS systems, real production data, and artificial intelligence algorithms. This approach is particularly relevant given the increased requirements for safety, productivity, and reliability of industrial facilities, as human factors are often the main cause of accidents (up to 60-80% of cases). The architecture of the simulator complex is designed to accurately emulate steady-state, transient, and pre-emergency operating modes of equipment, which are not achievable under actual production conditions. The experiment compared the training effectiveness of two groups of operators: one that used …

Review And Analysis Of Methods And Techniques For Refining Vegetable Oils, Umidjon Ruziev, Marufjon K. Shodiev

Chemical Technology, Control and Management

This article provides a comparative analysis of the main methods of vegetable oil refining: alkaline (chemical), physical, and combined. It examines the stages of the technological process and the applicability of each method for various types of oils (palm, soybean, cottonseed, sunflower, rapeseed, etc.). Attention is paid to energy consumption at the stages of neutralization, washing, drying, and deodorization, as well as the impact of equipment performance on specific energy consumption. Approximate calculations of the distribution of thermal and electrical energy during the processing of 1 kg of oil are provided. It is noted that physical refining, despite the high …

Expansion Of The Functionality Of Discrete Fiber-Optic Liquid Level Sensors, Azimjon Mamadaliyevich Khusanov, Yuriy Gennadyevich Shipulin

Chemical Technology, Control and Management

The article examines the problems and prospects of creating discrete fiber-optic liquid level gauges. Functional diagrams of single-channel and multi-channel discrete fiber-optic liquid level meters are presented. Examining the challenges of keeping this system running continuously reveals that sustaining its required reliability necessitates replacing malfunctioning measurement systems with operational ones. Investigations into differential equation models demonstrate that system recovery and failure events occur independently and follow a Poisson distribution pattern.

Investigation Of Nonlinear Magnetic Circuits Of Measuring Transducers With A Special Parameter Distribution Structure, Javhar Sulton O'G'Li Fayzullayev

Chemical Technology, Control and Management

The article proposes a new analytical method for investigating nonlinear magnetic circuits with a special structure of parameter distribution. The method is based on introducing into the system of nonlinear differential equations of such circuits the condition that the second derivative of the magnetic flux along the length of the circuit is equal to zero, as well as on the assumption that one of the geometric parameters of the studied magnetic circuit – the size of the air gap between the ferromagnetic rods, their thickness, width, or the linear value of the number of turns of the distributed excitation winding …

Comprehensive Mechatronic Design Methodology For 6-Dof Stationary Lower Limb Rehabilitation Exoskeleton Robot With Safety-Integrated Control Architecture, Javlonbek Rakhmatillaev Mr., Nodirbek Kimsanboyev Mr., Umidjon Takabaev Mr., Zafar Juraev3 Dr.

Chemical Technology, Control and Management

This paper presents the mechatronic design of a proposed six-degree-of-freedom (6-DOF) stationary lower limb rehabilitation exoskeleton (SLLRE) robot, developed through a comprehensive mechatronic design methodology that includes mechanical design, actuator and sensor selection, and the development of a control structure based on a safety-oriented control approach. The proposed 6-DOF SLLRE mechanical design introduces a comprehensive mechanical structure comprising bilateral hip, knee, and ankle joints, degrees of freedom, joint ranges of motion, human parameters for rehabilitation training, as well as the frames and structural elements of the proposed system. Furthermore, the selection of appropriate sensors, actuators, and control architecture for the …

Empirical Analysis Of Machine Learning Models For Predicting Equipment Failures Using Iot Sensor Data, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

This article examines the problem of detecting and predicting industrial equipment faults using IoT sensor data through machine learning techniques. Sensor readings such as temperature, vibration, pressure, voltage, and current, as well as FFT-based features, were statistically analyzed. Class imbalance and low signal informativeness were identified as key factors limiting model accuracy. Results obtained from Logistic Regression, Random Forest, and XGBoost models were comparatively evaluated, showing that when ROC-AUC values remain around 0.5, distinguishing fault and non-fault states becomes challenging. Correlation and feature-importance analyses confirmed the absence of strong dominant indicators. The findings highlight the need to improve sensor architecture …

Current Trends In Industrial Gas Furnace Control And Monitoring Systems, Utkir Uktam O'Gli Kholmanov

Chemical Technology, Control and Management

This paper presents a critical review of modern control methods applied to industrial gas-fired furnaces. Conventional PID controllers and their advanced modifications, including Advanced Process Control (APC) and cascade control schemes, are analyzed alongside Model Predictive Control (MPC) approaches. In addition, intelligent control algorithms—such as fuzzy logic and neuro-fuzzy systems (Fuzzy, ANFIS)—are examined. The study also considers advanced sensing technologies, including Tunable Diode Laser Absorption Spectroscopy (TDLAS), acoustic pyrometry, and infrared pyrometers, as well as digital twins and CFD-based modeling techniques. Particular attention is given to a comparative evaluation of control strategies based on key performance criteria, including energy efficiency, …

Skeleton-Based Human Action Recognition Using Spatio-Temporal Latent Features With A Gcn Model, Avazjon Marakhimov, Kabul Khudaybergenov, Mominov Zakhriddin

Chemical Technology, Control and Management

Owing to its resilience to visual noise and viewpoint variations, skeleton-based analysis has become a cornerstone of human action recognition research. Despite its practical significance, existing methodologies often suffer from a reliance on single-stream skeletal representations, which fail to encompass the full complexity of action features. This study introduces Latent Features for Human Action Recognition (LFHAR), a novel architecture designed to overcome these limitations by utilizing diverse spatio-temporal latent representations for improved feature extraction. The approach applies graph-based transformations to individual skeletal frames in temporal sequences, then arranges the derived graph features into spatio-temporal matrices. Evaluation of standard datasets demonstrates …

Models And Algorithms Of Control Mechanisms In Information Exchange Processes, Madina M. Fozilova, Dilshoda N. Uchqunova

Chemical Technology, Control and Management

In modern digital systems, efficient and reliable information exchange is essential for the stability of corporate systems. Traditional data management models struggle to detect and eliminate invalid, incomplete data at early stages, resulting in reduced accuracy and system inefficiency. This article proposes an advanced framework for controlling information exchange processes through the development of a Verification and Filtering algorithm. The algorithm operates within a multi-layered conceptual model that includes data input, control, validation, optimization, and decision layers. Acting as the core component, the Verification and Filtering algorithm distinguishes valid from invalid records in real time, ensuring data integrity before storage. …