Chemical Engineering Commons^™

Analyzing And Measuring Petrophysical Properties Of Marcellus Shale, Yahia Mustafa Yassin Mustafa

Graduate Theses, Dissertations, and Problem Reports (ETD)

Unconventional oil and natural gas play a key role in our nation's future. The U.S. has vast reserves of such resources that are commercially viable as a result of advances in horizontal drilling and hydraulic fracturing technology. These technologies enable greater access to oil and natural gas in shale formations. Responsible development of America's shale gas resources offers important economic, energy security, and environmental benefits. Hydraulic fracturing and horizontal drilling apply the latest technologies and make it commercially viable to recover shale gas and oil.

In order to estimate the original gas-in-place, predict the production rates, and optimize the hydraulic …

Dry Reforming Of Methane Using Microwave Irradiated Metal Oxide/Coal Char Catalysts, Anthony Carter

Graduate Theses, Dissertations, and Problem Reports (ETD)

This research focuses on the synthesis of both shaped and amorphous powder materials, the combination of these materials with dried Powder River Basin (PRB) coal char, and their reactionary properties with methane and carbon dioxide gasses with conventional and microwave (MW) heating. The first goal of this project was to synthesize shaped micro and nano sized particles with ideal dielectric properties for converting electromagnetic energy into heat and proven capabilities of activating methane. These particles were synthesized via solvothermal, hydrothermal, and co-preceptory treatments alone and onto the surface of dried PRB coal char. PRB is a sub-bituminous, low-ranking coal (LRC) …

Improving Performance And Durability Of Intermediate Temperature Proton‐Conducting Solid Oxide Electrolysis Cells Via Materials Design And Catalyst Surface Engineering, Hanchen Tian

Graduate Theses, Dissertations, and Problem Reports (ETD)

Solid oxide steam electrolysis cell, a promising electrical-chemical conversion device for the next generation efficient hydrogen production and energy storage, has been actively studied because of their high energy conversion efficiencies and prospective applications as electrochemical reactors. After decades of research on protonic ceramic materials, remarkable advances have been made in the protonic ceramic electrochemical cells (PCECs) air electrode and electrolyte. However, the existing air electrodes are far from satisfying the requirements of practical applications, a series of issues, including the lack of active and durable electrodes, greatly limit the commercialization. To date, the systematic development of triple conducting catalysts …

Simultaneous Activation Of Stable Molecules- Methane And Nitrogen- Using Microwave Reactor With And Without Plasma- To Produce Ethylene And Ammonia, Sarojini Tiwari

Graduate Theses, Dissertations, and Problem Reports (ETD)

The discovery of stranded natural gas around the world has made shale gas cheaper and widely accessible. This has driven the relevant research towards the direct utilization of Methane (CH4), a major component of natural gas. CH4 is a highly stable molecule, hence its activation and consequent formation of value-added chemicals in a direct and efficient manner is a relevant problem of the 21st century. All the commercial processes convert natural gas to chemicals indirectly, via the formation of syngas followed by several reactions. The conventional systems are energy intensive and one of the major contributors to green-house gas emissions. …

Microwave-Assisted Natural Gas Conversion To Value-Added Chemicals, Xinwei Bai

Graduate Theses, Dissertations, and Problem Reports (ETD)

Stranded gas is a raw gas mixture of volatile hydrocarbons where the main composition is methane. The producers flare the stranded gas at the site because the cost of collecting and transporting the gas is higher than the value of the gas itself. To reduce the waste of this natural resource, it is worthwhile to utilize the on-site stranded natural gas as feedstock to produce value-added chemicals without emitting greenhouse gas. Direct natural gas conversion process is more desirable because of lower capital investment. Methane and ethane, the two major components of natural gas, are very stable molecules that usually …

Adsorption Kinetics And Phase Behavior Of Particles Adsorbed At An Interface, Shaghayegh Darjani

Dissertations and Theses

The ability to predict the adsorption dynamic, phase behavior, and surface pressure of a monolayer of adsorbed particles in two-dimensional systems are key aspects of many current research areas. Examples include phase transitions in amphiphilic monolayers, emulsion stability due to particle adsorption at interfaces, and melting at an interface.

In this thesis, a new approach for deriving the equation of state for a two-dimensional lattice gas is proposed, based on arguments similar to those used in the derivation of the Langmuir-Szyszkowski equation of state for localized adsorption. This work aims to predict the adsorption kinetics and phase behavior of a …

A New Mathematical Theory For The Dynamics Of Large Tumor Populations, A Potential Mechanism For Cancer Dormancy & Recurrence And Experimental Observation Of Melanoma Progression In Zebrafish, Adeyinka A. Lesi

Dissertations and Theses

Cancer, a family of over a hundred disease varieties, results in 600,000 deaths in the U.S. alone. Yet, improvements in imaging technology to detect disease earlier, pharmaceutical developments to shrink or eliminate tumors, and modeling of biological interactions to guide treatment have prevented millions of deaths. Cancer patients with initially similar disease can experience vastly different outcomes, including sustained recovery, refractory disease or, remarkably, recurrence years after apparently successful treatment. The current understanding of such recurrences is that they depend on the random occurrence of critical mutations. Clearly, these biological changes appear to be sufficient for recurrence, but are they …

Molecular To Macroscopic Understanding Of Chloroaluminate Anion Intercalation In Rechargeable Aluminum-Graphite Batteries, Jeffrey Xu

Dissertations and Theses

Today’s global energy challenges pose an urgent need to electrify transportation and better store intermittent renewable energy sources (e.g., solar and wind energy). For such large-scale battery applications, aluminum batteries are a promising “beyond lithium-ion” technology due to the high volumetric capacity, earth abundance, low-cost, and inherent safety of aluminum metal. However, there are very few compatible positive electrode materials that exhibit high energy density and cycling stability, in part due to the challenges of electrochemically intercalating highly charged Al³⁺ cations. Recently, graphite has been demonstrated as a promising positive electrode material in non-aqueous rechargeable aluminum batteries, which store …

Molecular-Level Understanding Of Ionic & Electronic Charge Storage Mechanisms In Rechargeable Aluminum Batteries Using Sold-State Nmr, Ankur Lahanu Jadhav

Dissertations and Theses

Rechargeable aluminum-ion batteries are safe and low-cost alternatives to traditional lithium-ion batteries due to the high volumetric capacity (8040 mAh/cm³) of aluminum. However, very few electrode materials have shown reversible aluminum ion intercalation. Intercalation Al³⁺ ions in these structures leads to poor capacity retention, mainly due to slow solid-state diffusion of the highly charged tri-valent aluminum ions within these crystalline structures. In 2015, aluminum ions were shown to reversibly intercalate/de-intercalate into the Chevrel Mo₆S₈ phase, though the intercalation mechanism is not well understood. Alternatively, molecular chloroaluminate ions within the ionic liquid electrolyte have also …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Pore Microstructure Impacts On Lithium Ion Transport And Rate Capability Of Thick Sintered Electrodes, Ziyang Nie, Rohan Parai, Chen Cai, Charles Michaelis, Jacob M. Lamanna, Daniel S. Hussey, David L. Jacobson, Dipankar Ghosh, Gary M. Koenig Jr.

Mechanical & Aerospace Engineering Faculty Publications

Increasing electrode thickness is one route to improve the energy density of lithium-ion battery cells. However, restricted Li⁺ transport in the electrolyte phase through the porous microstructure of thick electrodes limits the ability to achieve high current densities and rates of charge/discharge with these high energy cells. In this work, processing routes to mitigate transport restrictions were pursued. The electrodes used were comprised of only active material sintered together into a porous pellet. For one of the electrodes, comparisons were done between using ice-templating to provide directional porosity and using sacrificial particles during processing to match the geometric density …

A Geometric Description Of The Set Of Stabilizing Pid Controllers, Keqin Gu, Qian Ma, Huiqing Zhou, Mahzoon Salma, Xingzi Yang

SIUE Faculty Research, Scholarship, and Creative Activity

This article developed a new method to described the set of stabilizing PID control. The method is based on D-parameterization with natural description of the set. It was found that the stability crossing surface is a ruled surface that is completely determined by a curve known as discriminant. The discriminant is divided into sectors at the cusps. Corresponding to the sectors, the stability crossing surface is divided into positive and negative patches. A systematic study is conducted to identify the regions with a fixed number of right half-plane characteristic roots. The crossing directions of characteristic roots for positive patches and …

Investigation Of Post-Acid Stimulation Impacts On Well Performance Using Fracture Modeling And Reservoir Simulation In A Jurassic Carbonate Reservoir, Muaath Alansari

Masters Theses

"Well stimulation (well fracturing) became an essential tool in the Oil and Gas industry to unlock the potential of unconventional reservoirs all over the world and especially in the Middle East. In Kuwait, well stimulation is obligatory when dealing with deep Jurassic carbonate reservoirs. Thus, the well fracture designing process plays a very critical role in determining the success of the stimulation job and the improvement of the recovery.

Several wells stimulated with 20% HCL have shown wide variations in both short and long term well production performance. The research aims to investigate and identify the possible reasons causing these …

Relationships Among Mineralogy, Geochemistry, And Oil And Gas Production In The Tuscaloosa Marine Shale, Hayley Roxana Beitel

Masters Theses

"The Tuscaloosa Marine Shale (TMS) is an unconventional shale reservoir located in southeast Louisiana and southwest Mississippi. Limited mineralogical and geochemical data for the TMS have been published. The data that do exist indicate that the formation is heterogeneous. Consequently, previous investigators and oil and gas companies have not managed to effectively link mineralogical and chemical changes to oil and gas production in the TMS. These linkages are critical to establish for future exploration efforts. In this study, we attempt to establish these relationships by gathering all existing mineralogical and chemical data in the TMS, including newly acquired data from …

Analysis Of Refracturing Activities In The Major Shale Plays In The United States, Faisal Shammam

Masters Theses

"Refracturing of existing horizontal multistage wells has increased over the past decade in the oil industry. This work aims to investigate all the refracturing operations in the most active shale plays in the united states (Bakken, Niobrara, Marcellus, Permian, Eagle Ford, Barnett, and Haynesville) in terms of completion technique, candidate selection, treatment types, and refracturing production efficiency. To collect the data of the refractured wells, an advanced data analytics approach was applied to separate the refractured wells from 170,000 wells reported in FracFocus, a public chemical registry for hydraulic fracturing in the United States, and combine it with DrillingInfo database, …

การเร่งสลายเมทิลีนบลูด้วยแสงโดยใช้อนุภาคนาโนคอปเปอร์ซิงค์ทินซัลไฟด์ที่สังเคราะห์จากวิธีโซลเจลและวิธีไฮโดรเทอร์มอล, กิตติยา ทองอ่อน

Chulalongkorn University Theses and Dissertations (Chula ETD)

น้ำเสียจากอุตสาหกรรมสิ่งทอเป็นหนึ่งในสาเหตุหลักของปัญหาสิ่งแวดล้อม ในปัจจุบันกระบวนการเร่งสลายด้วยแสงโดยใช้ตัวเร่งปฏิกิริยาแสงดูดซับแสงอาทิตย์และสลายสารอินทรีย์ได้รับความสนใจสำหรับการสลายสารอินทรีย์ในน้ำเสีย คอปเปอร์ซิงค์ทินซัลไฟด์ (CZTS) เป็นสารกึ่งตัวนำที่มีค่าสัมประสิทธิ์การดูดซับสูงและมีศักยภาพในการใช้เป็นตัวเร่งปฏิกิริยาแสง อนุภาคนาโน CZTS สามารถเตรียมได้จากหลายวิธี อย่างไรก็ตามวิธีโซล-เจลไม่เคยถูกใช้ในการสังเคราะห์อนุภาค CZTS เพื่อนำมาใช้เป็นตัวเร่งปฏิกิริยาแสงสำหรับกระบวนการเร่งสลายด้วยแสง ในงานวิจัยนี้สังเคราะห์อนุภาคนาโน CZTS ด้วยวิธีโซล-เจลและวิธีไฮโดรเทอร์มอลเพื่อทำการวิเคราะห์เปรียบเทียบ CZTS ที่สังเคราะห์โดยวิธีไฮโดรเทอร์มอลมีความเป็นผลึกสูงและมีขนาดผลึกประมาณ 20 นาโนเมตร ในขณะที่ CZTS ที่สังเคราะห์โดยวิธีโซล-เจลมีขนาดผลึกประมาณ 5 นาโนเมตร กิจกรรมการเร่งสลายด้วยแสงของ CZTS วิเคราะห์ได้จากการเปลี่ยนแปลงความเข้มข้นของเมทิลีนบลูภายใต้การฉายแสงในช่วงที่มองเห็น 94.62% และ 51.13% ของเมทิลีนบลูถูกย่อยสลายหลังจากเวลาผ่านไป 15 ชั่วโมงโดยใช้ CZTS ที่สังเคราะห์ด้วยวิธีไฮโดรเทอร์มอลและวิธีโซล-เจล ตามลำดับ เพื่อเพิ่มกิจกรรมการเร่งสลายด้วยแสง ไฮโดรเจนเปอร์ออกไซด์ถูกใช้ร่วมกับ CZTS ทำให้สามารถสลายเมทิลีนบลูได้ถึง 96.93% และ 42.87% โดยใช้ CZTS ที่สังเคราะห์ด้วยวิธีไฮโดรเทอร์มอลและวิธีโซล-เจล ตามลำดับ ภายในเวลา 3 ชั่วโมง ไฮโดรเจนเปอร์ออกไซด์จะช่วยเพิ่มปริมาณอนุมูลไฮดรอกซิลสำหรับการสลายเมทิลีนบลู

Use Of Polyacrylonitrile As Anodic Artificial Solid Electrolyte Interphase For Aqueous-Based Zinc-Ion Batteries, Nutchaya Muangplod

Chulalongkorn University Theses and Dissertations (Chula ETD)

Rechargeable aqueous zinc-ion batteries (ZIBs) have attracted attention for energy storage systems because of their high specific capacity, low cost, and safety. However, practical application of the zinc anode in mild acidic electrolytes is limited by several issues such as dendrite formation, corrosion, hydrogen evolution reaction, passivation and relatively low cycling performance. Coating the zinc anode with graphite (GP) (GP@Zn) can partially solve these issues and improves the cycling performance of ZIB. However, after long-term charge/discharge cycles, zinc tends to migrate and redeposit over the surface of GP owing to the electronic conductivity of GP particles. Thus, after long-term cycling, …

Understanding Absorption, Supersaturation, And Drug Activity In Solution: Working Towards Developing A More Biorelevant Media, Freddy Arce

Theses and Dissertations--Pharmacy

With the looming dominance of poorly water-soluble chemical entities within the pharmaceutical pipeline, the pharmaceutical industry has leaned on the use of supersaturating drug delivery systems (SDDSs) to achieve efficacious concentrations within the gastrointestinal fluids. SDDSs aim to achieve concentrations in solutions greater than the solubility of the lowest energy crystalline form. However, the generation of supersaturated solutions of active pharmaceutical ingredients (APIs) creates a strong crystallization potential, which is undesirable.

In product development, supersaturating products often fail in Phase I and Phase II clinical trials due to poor oral bioavailability and a lack of in vivo efficacy. Pre-clinical testing …

Extraction Of Micro- And Nano-Plastic Particles From Water Using Hydrophobic Natural Deep Eutectic Solvents, Jameson R. Hunter

Theses and Dissertations--Biosystems and Agricultural Engineering

The production of plastic and the amount of waste plastic that enters the environment increases every year. Synthetic polymers will gradually break down into particles on the micro- and nano-scale. The micro- and nano-plastics pose a significant ecological harm by transporting toxic chemicals and causing inflammation and cellular damage when ingested. Two common plastics are polyethylene terephthalate (PET) and Polystyrene (PS), and a newer bioplastic polylactic acid (PLA) that has become a popular alternative. Deep eutectic solvents are a recently discovered solvent composed of a hydrogen bond donor and hydrogen bond acceptor and have been proposed as a cheaper alternative …

Ultrafast Thermal Modification Of Strong Coupling In An Organic Microcavity, Bin Liu, Vinod M. Menon, Matthew Y. Sfeir

Publications and Research

There is growing interest in using strongly coupled organic microcavities to tune molecular dynamics, including the electronic and vibrational properties of molecules. However, very little attention has been paid to the utility of cavity polaritons as sensors for out-of-equilibrium phenomena, including thermal excitations. Here, we demonstrate that non-resonant infrared excitation of an organic microcavity system induces a transient response in the visible spectral range near the cavity polariton resonances. We show how these optical responses can be understood in terms of ultrafast heating of electrons in the metal cavity mirror, which modifies the effective refractive index and subsequently the strong …

Effects Of Microporous Structure On The Enzymatic Conversion Of Biomass Using A Multiscale Model, Saketh Merugu

Dissertations, Master's Theses and Master's Reports

The generation of biofuels from lignocellulosic biomass involves innovative process technology that is being investigated worldwide. Enzymatic hydrolysis is a major step in the contemporary process of the generation of biofuels. Guided by pore size distribution measured using NMR cryoporometry, we developed pore-enzyme diffusion and adsorption models at the particle level coupled with a kinetic model for cellulose, cellobiose, and glucose production at flask level. By simulating these models in MATLAB, COMSOL, and Polymath software packages, we investigate the effects of various biomass particle-related parameters (particle dimensions, porosity, enzyme accessibility) on the characteristic time of enzyme diffusion and adsorption and …

Establishing Independent Tunability Of The Mechanical And Transport Properties Of Polymer Gels, Lucas Rankin

Master’s Theses

Polymer gels can be used in the fabrication of materials for filtering liquid and gaseous media, solid-state electrolytes, and transdermal medical patches. This diverse range of applications primarily relies on the transport and mechanical properties of polymer gels. Both sets of properties have shown excellent tunability, but typically in a coupled fashion. Establishing the independent tunability of the transport and mechanical properties of polymer gels (using simple, cost-effective methods) is paramount if polymer gels are to be used to their full potential. Specifically, block copolymer gels self-assemble into organized nanoscale networks within the gel solvent, which allows for facile control …

The Characterization Of Purified Citrate-Coated Cerium Oxide Nanoparticles Prepared Via Hydrothermal Synthesis, Matthew L. Hancock, Robert A. Yokel, Matthew J. Beck, Julie L. Calahan, Travis W. Jarrells, Eric J. Munson, George A. Olaniyan, Eric A. Grulke

Chemical and Materials Engineering Faculty Publications

Hypothesis

Cerium oxide nanoparticles were synthesized using a hydrothermal approach with citric acid as a stabilizing agent. Citric acid adsorption onto the nanoceria particle surface can cease particle formation and create a stable dispersion for an extended shelf life. The product was dialyzed immediately following the synthesis to remove unreacted cerium that could contribute to biological effects. Nanoparticle characterization results are expected to help identify the surface citrate bonding structure.

Experiments

Many characterization techniques were utilized to determine size, morphology, surface properties, and citrate complexation on the nanoceria particle surface. These included transmission electron microscopy, electron energy loss spectroscopy, dynamic …

Heavy Metals Found In Juul's Electronic Cigarettes, Joshua F. Gesselberty

Honors Theses

Electronic cigarettes better known as e-cigarettes have been consistently rising in popularity with new products entering the market daily. E-cigarettes function by vaporizing a liquid composed of propylene glycol, glycerin, benzoic acid, nicotine, and flavor additives with the use of a metallic heating element. This vapor produced is then inhaled by the user. The composition of this liquid is critical to discovering the possible health effects.

This study investigates the presence and concentrations of heavy metals in the e-liquid before and after vaping. An ICP-MS was used because of its ability to scan several metals rapidly and its high sensitivity. …

Helicopter Shaft Heating Parameters For Polyamide-11 Coating, Selim Kevran Ph.D, Uğur Ati̇ci̇

International Journal of Aviation, Aeronautics, and Aerospace

In this study, the heating parameters required for polyamide-11 (P11) coating of the helicopter shaft were investigated. The torsion value created by the force applied to the middle of the helicopter's shaft is measured. Heating before coating affects the torsion value of the shaft. A new heating mechanism has been designed to cover the shaft surface without changing the torsion value of the shaft. Thus, the coating surface is left inside the furnace and the torsion measurement area outside of the furnace. Taguchi method was used to determine heating parameters such as furnace type, initial temperature and heating time. The …

Detection Of 2,4,6-Trinitrotoluene Using A Colorimetric Gold Nanoparticle Air Cassette Filter, Andrea I. Ferrer Vega

Master of Science in Forensic Science Directed Research Projects

Trinitrotoluene (TNT) is an explosive commonly used during military and terrorist activities. Current methods to identify this compound require sampling, transport and analysis at a forensic lab using analytical instrumentation. However, on-site detection is needed to assist efforts to prevent detonation. Gold nanoparticles have been used as sensors throughout the years due to their versatility and surface enhanced Raman scattering properties in the presence of an analyte and low limits of detection. By taking advantage of the Meisenheimer complex that TNT forms in the presence of amines, it is possible to determine its presence at picogram levels. Subsequently, adhering amine …

The Critical Role Of Dynamic Surface Tension Of Surfactants On The Impact Dynamics Of Water Droplets, Amir Esmaeili, Reza Mohammadi

Graduate Research Posters

Due to their time-dependent surface tension, the addition of surface-active agents or surfactants to water for specific applications has made controlling the impact dynamics of these droplets a complex phenomenon. This work investigates the influence of the molecular weight, concentration, and ionic nature of the surfactants as well as the substrate surface characteristics on the impact dynamics of surfactant-laden droplets using a high-speed camera at 10000 frames per second. Sodium dodecyl sulfate, hexadecyltrimethylammonium bromide, and n-decanoyl-n-methylglucamine were used as anionic, cationic, and nonionic surfactants, respectively. We used hydrophilic glass slides, hydrophobic polytetrafluoroethylene, and superhydrophobic alkyl ketene dimer (AKD) as substrates. …

Biomass-Derived Electrode Materials And Sustainable Processes For Supercapacitors, Katelyn M. Shell

Theses and Dissertations

Biomass is one of the most abundant natural resources and has been used as a source of energy for thousands of years. Biomass as a precursor for energy storage materials is still relatively novel and faces several obstacles before becoming commonly used in today’s electrical devices. Currently, energy storage devices, such as batteries, capacitors, and supercapacitors, utilize petroleum-derived graphitic carbons for anodes, generating a need for more sustainable materials. Biomass, as a carbon-rich source for electrode materials, presents a viable and economically feasible alternative due to the prevalent lignocellulosic compounds: lignin, cellulose, and hemicellulose. Preliminary studies on the solid residues …

Enhancing Emulsion Liquid Membrane System (Elm) Stability And Performance For The Extraction Of Phenol From Wastewater Using Various Nanoparticles, Faris H. Al-Ani, Qusay F. Alsalhy, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Emulation liquid membrane (ELM) technology has recently garnered attention as an efficient alternative for separating pollutants, but it faces the problem of instability during the application, as well as emulsion breaking. With this in mind MgO, Al₂O₃, and three magnetic Fe₂O₃ nanoparticles (of different sizes) were utilized to fabricate a new Pickering ELM system (PELM). The extraction efficiency of phenol from aqueous solution by PELM was studied with different NPs types and with different phenol concentrations (1,000; 500; 100; and 50 ppm). It was found that the type of NPs and concentration of …

Assessing Solvent Viscosity Impact On The Physical Characteristics Of Polymeric Organogels, Cameron Hong

Honors Theses

Traditionally, studies of polymeric organogels focus on the impact of polymer factors (e.g., molecular weight and polymer concentration) on the gels’ mechanical and transport properties. Alternatively, this study seeks to assess the impact of altering solvent viscosity, while holding polymer factors constant. The gels in this study were composed of different viscosity mineral oils, styrene-ethylene-butylene-styrene (SEBS) triblock copolymer as a gelator, and oleic acid (OA) as a model drug. Samples were formulated to have 6.5, 11.2, and 15.7 wt% SEBS copolymer for each mineral oil, varying in viscosity from ≈30 mPa*s to ≈500 mPa*s. Uniaxial mechanical testing was performed to …