Chemical Engineering Commons^™

Exploration Of The Sludge Biodiesel Pathway, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater sludge is an overlooked source of fat, oil, and grease (FOG) that could be converted into biodiesel. The United States produces about 8 million tons of sludge per year. The disposal cost for this amount of sludge is about 2 billion US dollars. The widespread availability and low cost of sludge compared to other biodiesel raw materials make it an economical choice for a renewable fuel. Using sludge as a raw material can produce 25 to 30 mg per gram of fatty acid methyl ester (FAME); the main component of biodiesel. Sludge biodiesel has the potential of transforming a …

2020-21 Aiche Student Design Competition: Naphtha Processing, Brenna Kathleen Flynn, Hannah Orebaugh, Paul Deaton

Honors Capstone Projects and Theses

No abstract provided.

Valorization Of Secondary Agriculture Residues, Narendra Kumar

Master's Theses

Secondary agriculture residues have the potential to be major contributors as resources for energy and sustainably sourced materials production. Separating secondary agricultural residues, which have already been transported to processing centers, into individual biomass components could convert these wastes into bioproducts. Many types of pretreatments to achieve this separation involve chemicals that are hazardous for the environment. Several deep eutectic solvents (DES) that are biocompatible have been investigated for their ability to deconstruct rice hulls and sugarcane bagasse. Mass yield, enzymatic hydrolysis of the pretreated biomass, fiber analysis, and Fourier transform infrared spectroscopy have confirmed that the DES formic acid:choline …

Economic Feasibility Of Mixed Plastic Waste Pyrolysis Using Twin Reactor System In Northwest Arkansas, Carol Rogers, Patricia Means, Renato Gonzalez, Kaida Sheets, Hayden Townsend

Chemical Engineering Undergraduate Honors Theses

Plastic waste generation is increasing at an unsustainable rate while recycling solutions remain stagnant. As a chemical means of recycling, mixed plastic waste pyrolysis can generate synthetic oil appropriate for use as fuel in power generation from plastic waste that otherwise accumulates in landfills. With the scaling of a commercial plastic pyrolysis process in Northwest Arkansas (NWA) modeled after an operational sawdust pyrolysis unit in Huntsville, Arkansas, economic analysis resulted in 26.3% internal rate of return. Therefore, construction of a commercial mixed plastic-to-fuel pyrolysis plant is economically justified and should be pursued. To effectively implement the proposed design, NWA must …

Valorization Of Secondary Agriculture Residues, Narendra Kumar

Doctoral Dissertations

Secondary agriculture residues have the potential to be major contributors as resources for energy and sustainably sourced materials production. Separating secondary agricultural residues, which have already been transported to processing centers, into individual biomass components could convert these wastes into bioproducts. Many types of pretreatments to achieve this separation involve chemicals that are hazardous for the environment. Several deep eutectic solvents (DES) that are biocompatible have been investigated for their ability to deconstruct rice hulls and sugarcane bagasse. Mass yield, enzymatic hydrolysis of the pretreated biomass, fiber analysis, and Fourier transform infrared spectroscopy have confirmed that the DES formic acid:choline …

Remote Performance Modulation Of Ultrafiltration Membranes By Magnetically And Thermally Responsive Polymer Chains, Arijit Sengupta, Anh Vu, Xianghong Qian, Sumith R. Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

Ultrafiltration membranes, that respond to an external magnetic field and local temperature have been developed. Surface-initiated activator-generated electron transfer (AGET) atom transfer radical polymerization (ATRP) has been used to graft poly(N-isopropylacrylamide) (PNIPAm) from the surface of 300 kDa regenerated cellulose membranes. The polymerization initiator was selectively attached to the entire membrane surface, only the outer membrane surface or only the inner pore surface. A superparamagnetic nanoparticle was attached to the end of the polymer chain. The DI water flux as well as the flux and rejection of bovine serum albumin were investigated in the absence and presence of a 20 …

Household Income And Air Pollution At Public Schools In The United States, Katyland Facas, Kristina Wagstrom

Honors Scholar Theses

Poor air quality at schools may negatively impact students’ academic performance.1 2 3 In this study we look at the relationship between ambient, outdoor air quality and student socioeconomic status at United States public schools. We used free and reduced lunch eligibility, as part of the USDA’s National School Lunch Program, as an indicator of household income. We focus on nitrogen dioxide (NO2), ozone (O3), and particulate matter smaller than 2.5 microns (PM2.5). We used ambient pollutant concentration estimates at census block group resolution (Kim et al.) as the outdoor air pollution concentration at each school.4 We found a positive …

Biopolymeric Materials For Tissue Regeneration, Cell Manufacturing, And Drug Delivery, David Alfonso Castilla-Casadiego

Graduate Theses and Dissertations

The development of materials for tissue regeneration, cell manufacturing, and drug delivery is possible by the manipulation of polymer properties and the use of three different techniques including layer-by-layer, electrospinning, and molding technique.

By applying the layer-by-layer technique over biomaterials, it is possible to develop polymeric multilayers that promote a more favorable environment for cellular functionality, increasing the possibility of improving their acceptance in the area of implantation. IRVASE demonstrated being a powerful technique that allows for a reliable characterization of the physical-chemical and thermal properties of the fabricated surfaces. This opens the possibility to monitor the design of surfaces …

Degradation Of Antibiotics In Aqueous Phase Using Pms Catalytic Decomposition With Zero-Valent Iron Nanoparticles Immobilized In Sba-15, Ahdee Bluma Zeidman

UNLV Theses, Dissertations, Professional Papers, and Capstones

Zero-valent iron nanoparticles (nZVI) have been studied as an option for soil remediation and water treatment for many years. The capability of nZVI to produce oxidation/reduction processes, depending on the reaction conditions, has attracted great interest with their major drawback being reactivity loss through agglomeration. The loss in nZVI surface area has been reported to be prevented through immobilization onto a porous media (e.g., SBA-15, MCM-41, or zeolites). In this work, a mesoporous silica structure (SBA-15) is used as an nZVI supporting material to enhance its reactivity and promote peroxymonosulfate (PMS) catalytic decomposition for the degradation of antibiotics in aqueous …

Process Design And Optimization Of A Once-Through Dimethyl Ether Process Using Aveva Process Simulation, Jerrod Scott

Honors Theses

The primary purpose of the project on which I wrote this thesis was to design an optimize a once-through dimethyl ether process utilizing a software called AVEVA Process Simulation. The process was initially modeled and optimized to minimize the EAOC of the distillation column. The result of that effort was an optimized column with six stages with the feed entering the column at stage six. It had a height of 3 m, diameter of 0.44 m, and an EAOC of $65,100. This optimized solution was submitted to a Toller. The Toller provided available equipment to model the plant. From here, …

Economic Feasibility Of A Methanol To Dimethyl Ether Production Process To Avoid Contract Failure Shortfalls From The Covid-19 Pandemic, Jacob Noll, Robert Wasson, Harrison Mckinnis

Honors Theses

Our team entered the 2021 AVEVA Academic Competition, where teams of undergraduate senior chemical engineering students competed across the country. The competition was composed of two parts: the base case design and the optimization of a chemical process. As part of the competition, our team is acting as the Engineering team for a fictional company that has given us this project. Due to COVID-19, our methanol producing company has lost a contract with a customer, leaving 23,000 tonnes/yr of unclaimed methanol. We have two choices with this methanol: either sell the methanol on the market at the spot price for …

Design Of An Undergraduate Laboratory Experiment Utilizing A Stirred-Tank, Jacketed Bioreactor, Brennen Middleton

Honors Theses

Bioreactors are utilized in many industries, such as the food, alternative fuel, and pharmaceutical industries, to design and manufacture products. Unlike the similar chemical batch reactors utilized in many chemical processing facilities, bioreactor utilization requires engineers to consider a wider range of operating conditions and parameters. This results in a more complex reaction system and controls network. Due to this, it is imperative for chemical and biomedical engineering students to not only understand the theory surrounding these reactor systems, but also understand how to properly design and perform operating procedures with these systems. Thus, it was determined to create an …

Ethylbenzene Production Case Study And Optimization, Brandon Borek

Honors Theses

The objective of this project was to investigate the process of producing ethylbenzene from the liquid-phase reaction of ethylene and benzene and perform parametric and topological optimizations to increase the net present value of the production facility. To do so, the base case conditions of the process were modeled and quantified economically followed by an investigation into the existing process to determine conditions that could be altered to improve the economic viability of the project. After optimizing the parametric conditions and topology of the process, the net present value of the project was increased by 305 million dollars to 191 …

Dynamics In Drops As Confined Systems Containing Nanoparticles: Reformation Of Nanoparticles And Evaporation Of Water, Vijitha Mohan, Xianjie Qiu, Partho Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Brine is used to displace crude oil in a reservoir and its performance improves when brine contains nanoparticles. It is the presence of nanoparticles in confinements, such as at dynamic contact lines and in thin films, which is of importance. The investigators here have determined a fast way to obtain confined systems by evaporating a small drop of water containing nanoparticles. Water droplets containing nanoparticles of alumina or silica were evaporated on surfaces of polyethylene terephthalate sheets, which are partially wet by water, and glass which is fully wet. After the liquid in the drops evaporated, the residues were examined …

Mapping Three Dimensional Interactions Between Biomolecules And Electric Fields., Joseph Patrick Brian P.E.

Electronic Theses and Dissertations

Electroporation is a technique that induces the formation of open pores in cell membranes by the application of an electric field. Electroporation is widely practiced in research and clinical work for transfection of genetic sequences and drug molecule transport through the membrane barrier. However, a full theoretical explanation of the molecular mechanisms and thermodynamics responsible for pore formation, structure, and longevity does not yet exist. Advances in molecular dynamics simulations have enabled theoretical studies of electroporation with previously unobtainable fidelity spanning biologically relevant timescales. All-atom simulations utilizing the recently developed method of computational electrophysiology demonstrate that pore size correlates to …

Settling Of Spherical Particles In High Viscosity Friction Reducer Fracture Fluids, Ghith Biheri, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Investigating the key factors that impact fluid rheology and proppant static settling velocity in high viscosity friction reducers (HVFRs) is a critical aspect for successful proppant transport in hydraulic fracture treatment. In this study, the rheological properties of HVFRs were tested at various temperature ranges (i.e., 25, 50, 75, and 100◦C) and different HVFR concentrations (i.e., 1, 2, 4, and 8 gpt). Three sizes of spherical particle diameters (i.e., 2, 4, and 6 mm) were selected to measure the static settling velocity. The fracture fluid was tested in two fracture models: an unconfined glass model and a confined rectangular model …

Aveva Competition 2021: Dimethyl Ether Production Process, Nicholas Gaouette

Honors Theses

The following study was conducted to assess the economic and process feasibility of a dimethyl ether (DME) production process. A portion of the methanol produced by an existing facility would be used to produce DME through a dehydration reaction. DME production is being considered as a means to compensate for lost methanol revenue, as methanol prices have recently decreased and an excess supply is present on the open market.

The first milestone in the study was the construction of a working process model within AVEVA Process Simulation. This steady-state process model would provide information essential to further design and optimization …

Design And Analysis Of A Process To Convert Methanol Into Dimethyl Ether, Elisa M. White

Honors Theses

A recent economic downturn led to the loss of a contract for a company that sells methanol. The company has two options to recover some of the profit lost from the contract termination. One option is to sell the excess methanol at the spot market price, and the second option is to implement a process to convert the excess methanol into dimethyl ether. This project investigated the implementation of a process to convert the methanol from the lost contract into dimethyl ether. The process was simulated in AVEVA Process Simulation to estimate the size of equipment needed. A toller provided …

Machine Learning Representations For Optimization Of Process Systems, Logan Watts

Chemical Engineering Undergraduate Honors Theses

The optimal operation of chemical processes provides the foundation for optimization problems to determine the most effective way to operate or design a given process. Chemical processes can be represented as nonlinear systems of equations with decision variables, resulting in a problem that can be solved through nonlinear solvers. The downfalls of nonlinear solvers create the need for improved methods of finding globally optimal solutions to the design or operation of a chemical process. The project will seek to evaluate the use of artificial neural networks to approximate nonlinear systems of equations for the purpose of optimizing chemical processes. The …

Peptoid-Functionalized Gold Nanoparticles For Zika Virus Envelope Protein Detection, Meagan Olsen

Chemical Engineering Undergraduate Honors Theses

Detection and identification of viral pathogens is essential in providing effective and rapid medical treatment. Well-established detection methods can be expensive, slow, and sometimes unable to provide the needed sensitivity and specificity. The Zika virus is one clinically relevant pathogen that cannot be easily identified due to cross-reactivity with other viruses from the same family. Electrochemical sensors enhanced with peptoid-functionalized gold nanoparticles (AuNPs) are an alternative to traditional techniques that offers rapid, accurate, label-free pathogen detection for point-of-care diagnostics. To this end, a peptoid capable of binding to the Zika virus envelope protein was developed and its binding affinity for …

Promotion Of Human Schwann Cell Proliferation Using Heparin/Collagen Coated Nerve Conduits, John Magness

Chemical Engineering Undergraduate Honors Theses

Often in the aftermath of an injury or surgery, the sense of touch and muscle control is lost in the affected area as nerves are damaged or severed and fail to grow back completely. The regeneration of the nerve cells can be promoted by treating the nerves with nerve conduits. Nerve conduits are hollow cylinders of bio-compatible materials that can be surgically implanted to the disconnected nerve to promote and direct the growth of nerves. The objectives of this research are to investigate the ability of nerve conduits treated with layer-by-layer coatings to promote the growth of Schwann cells, to …

Development Of An Integrated Salt Cartridge-Reverse Electrodialysis (Red) Device To Increase Electrolyte Concentrations Of Human Blood Flow To Power Biomedical Devices, Caroline Campbell

Chemical Engineering Undergraduate Honors Theses

Emerging technologies in nanotechnology and biomedical sciences have led to an increase in biomedical implantable devices including cardiac pacemakers, artificial organs, drug pumps, and sensors. These devices require continuous stable and reliable power to operate, which creates the demand for the need to find a safe, reliable, and stable power source. A promising avenue for a power source for these devices is a miniaturized reverse electrodialysis (RED) biopower cell design that utilizes the salinity differences between bloodstreams that flow inside the human body. Initial results of the RED system demonstrate that higher gradient salinity differences between streams lead to a …

Garver Industrial Design Project: Designing A Full-Scale Reverse Osmosis Water Treatment Facility For The City Of Lawton, Oklahoma, Kayliana Warden, Marlando Collins, Sandrina Depaz, Reid Eakin, Reed Leasure, Vera Rodriguez

Chemical Engineering Undergraduate Honors Theses

A groundwater treatment facility was designed for Lawton, Oklahoma to address potential water scarcity due to drought conditions in southwest Oklahoma. The facility will produce five million gallons per day (MGD) of treated water. The plant will have the capacity of treating 4,085 gallons per minute of influent water at an 86% recovery. The water to be treated will come from the Arbuckle-Timbered Hills Aquifer. Studies have been conducted around the aquifer to identify the best well site locations.

A centralized treatment facility using reverse osmosis filtration as the main treatment technology has been designed. To prevent reverse osmosis membrane …

Predicting Henry's Law Constants Of Volatile Organic Compounds Present In Bourbon Using Molecular Simulations., Christopher A Abney

Electronic Theses and Dissertations

Henry’s Law describes the partitioning of molecules into liquid and gas phases at low concentrations. Henry’s Law, which is based upon a species-dependent constant and the gas phase partial pressure, is useful for predicting phase behavior of dilute solutes. However, Henry’s Law constants are difficult to measure experimentally or to predict using structure-property or thermodynamic models. Herein, molecular simulations were used to calculate Henry’s Law constants for 18 volatile organic compounds (VOCs) present in bourbon. The novel simulations analyzed solvation thermodynamics of small organic molecules in 120 proof ethanol. A fast-growth non-equilibrium free energy method was used in which the …

Analysis Of Fluid Flow In Redox Flow Batteries, Erfan Asadipour

McKelvey School of Engineering Graduate Student Theses & Dissertations

Redox flow batteries (RFB) hold great potential for large-scale stationary energy storage. However, their low energy density compared to other energy storage systems must improve for feasibility. Electrolyte flow distribution affects current density distribution and providing a uniform current density distribution is one way to improve RFB performance. Additionally, reducing the power consumption of the electrolytes’ pump as a source of energy loss in RFB systems increases their efficiency. Investigating both subjects requires analysis of the fluid dynamics in RFB cells.

In this thesis, a novel, computationally cost-effective hydraulic-electrical analogous model (HEAM) was developed to study fluid dynamics by implementing …

Image Analysis Of Charged Bimodal Colloidal Systems In Microgravity., Adam J. Cecil

Electronic Theses and Dissertations

Colloids are suspensions of two or more phases and have been topics of research for advanced, tunable materials for decades. Stabilization of colloids is typically attributed to thermodynamic mechanisms; however, recent studies have identified transport or entropic mechanisms that can potentially stabilize a thermodynamically unstable colloidal system. In this study, suspensions of silsesquioxane microparticles and zirconia nanoparticles were dispersed in a nitric acid solution and allowed to aggregate for 8-12 days in microgravity aboard the International Space Station. The suspensions were subsequently imaged periodically at 2.5x magnification. Due to the inadequacy of existing image analysis programs, the python package “Colloidspy” …

Annealing Of Encapsulated Heavy Metals From Brine Water Utilizing Microwave Enabled Sol-Gel Process, Adam Michael Flynn

Electronic Theses and Dissertations

Various waste encapsulation strategies have been investigated to solidify and stabilize heavy metal wastewater for proper long-term storage. This work aims to enhance a method of novel sol-gel encapsulation of heavy metals from mock brine waters using tetramethyl orthosilicate with the addition of an annealing step at various temperatures in order to reduce leaching of metals from the silica monoliths when exposed to water. The metals tested for encapsulation and leaching were mercury (II) chloride, potassium dichromate, sodium selenite, boric acid, cadmium chloride, and copper (II) acetate. The annealing of the silica monoliths led to an increased degree of for …

Heavy Oil And Vapex Process: A Brief Review, Vijitha Mohan, Parthasakha Neogi, Baojun Bai

Chemical and Biochemical Engineering Faculty Research & Creative Works

Heavy oil recovery requires either heat or solvent assistance to reduce its high viscosity first and then the less viscous oil can be recovered. Processes that use vapor assisted petroleum extraction (VAPEX) utilize vaporized solvent. Solvent vapors are introduced through a top injection well to induce viscosity reduction and the less viscous oil is collected at the bottom production well. It is noteworthy, that the solvent itself when recovered, can be seen as an integral part of oil. Exact molecular weight and chemistry of heavy oil is uncertain making analysis of thermodynamic properties difficult, however this is overcome by making …

In Vivo Analysis Of A Proprietary Glass-Based Adhesive For Sternal Fixation And Stabilization Using Rabbit And Sheep Models, Cina Mehrvar, Emily Deignan, Mark Hurtig, Gideon Cohen, Paul Zalzal, Oleg Safir, Adel Alhalawani, Marcello Papini, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Wire cerclage remains the standard method of care for sternal fixation, following median sternotomy, despite being beset with complications. An emerging treatment option has been to augment the wires with an adhesive. A patented ionomeric glass (mole fraction: SiO₂:0.48, ZnO:0.36, CaO:0.12, SrO:0.04) has been used to formulate GPC+, a glass polyalkenoate cement (GPC), by mixing it with poly(acrylic) acid (PAA) and de-ionized water. In a human cadaver study, this material, when applied with wire cerclage, was able to significantly reduce sternal instability. However, the material has yet to be tested in pertinent animal models. Here, after a series …

Peptoid-Based Microsphere Coatings For Biomaterial Applications, Jesse Leland Roberts

Graduate Theses and Dissertations

Peptoids are peptidomimetic oligomers that predominantly harness similarities to peptides for biomimetic functionality. The incorporation of chiral, aromatic side chains in the peptoid sequence allows for the formation of distinct secondary structures and self-assembly into supramolecular assemblies, including microspheres. Peptoid microspheres can be coated onto substrates for potential use in biosensor technologies, tissue engineering platforms, and drug-delivery systems. They have the potential for use in biomedical applications due to their resistance to proteolytic degradation and low immunogenicity. This dissertation focuses on the physical characteristics and robustness of the peptoid microsphere coatings in various physiological conditions, along with their ability to …