Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 271 - 300 of 14039

Full-Text Articles in Chemical Engineering

The Effect Of Reduction Of Input-Parameters On Data-Driven Prediction Of Critical Heat Flux In Rod Bundles Using Extended Parameters For Reactor Thermal–Hydraulic Safety, Rehan Zubair Khalid, Atif Khan, Farooq Ahmad, Muthanna H. Al-Dahhan, Atta Ullah Mar 2026

The Effect Of Reduction Of Input-Parameters On Data-Driven Prediction Of Critical Heat Flux In Rod Bundles Using Extended Parameters For Reactor Thermal–Hydraulic Safety, Rehan Zubair Khalid, Atif Khan, Farooq Ahmad, Muthanna H. Al-Dahhan, Atta Ullah

Chemical and Biochemical Engineering Faculty Research & Creative Works

Accurate prediction of the critical heat flux (CHF) is a key pillar for ensuring both the safety and economic performance of nuclear reactors. While machine learning (ML)-based methodologies have demonstrated considerable success in predicting CHF, most existing studies have been confined to simplified geometries, such as single tubes. Conversely, limited attention has been devoted to CHF prediction in realistic reactor environments, particularly within rod bundle configurations, where complex multiphase flow and heat transfer phenomena prevail. In this work we develop different AI models based on large dataset operating conditions as well as the complex geometric features of rod bundles. The …

Go to article

Sustainable Pathways For Fish Waste Oil Valorization Into Biofuel: Process Synthesis And Case Study, Hany A. Elazab, Radhi H. Alazmi, Abdelrahman El-Bagalaty, Hossam Tammam, Mahmoud El-Sayed, Mohamed Omar, Fathi Shokry, Mamdouh A. Gadalla, Fatma H. Ashour, Thokozani Majozi Mar 2026

Sustainable Pathways For Fish Waste Oil Valorization Into Biofuel: Process Synthesis And Case Study, Hany A. Elazab, Radhi H. Alazmi, Abdelrahman El-Bagalaty, Hossam Tammam, Mahmoud El-Sayed, Mohamed Omar, Fathi Shokry, Mamdouh A. Gadalla, Fatma H. Ashour, Thokozani Majozi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Biodiesel is a promising, sustainable alternative to fossil fuels such as petrol and diesel. Currently, biodiesel can be produced from edible plant oils and non-edible sources and wastes. Notably, fish waste oil is a sustainable resource for transesterification reactions to produce biodiesel. This research proposes a general process design methodology to investigate the potential of biodiesel production from fish waste oil as a pathway for waste-to-energy. The methodology integrates Pinch Analysis principles and process simulation to optimize the energy efficiency of a process design. Real data are collected on fish waste from fish industries in Egypt, focusing on three regions …

Go to article

Triphenylmethane-Derived Levelers For High-Speed Redistribution Layer Copper Electroplating Of Tailored Surface Morphologies, Zi-Hao Song, Wei-Bin Wang, Xiao-Hui Liu, Xiao-Min Han, Yi Zhou, Rui Huang, Yan-Xia Jiang, Zhe Li, Xiao-Wei Liu, Mei-Ling Xiao, Hong-Gang Liao, Wei-Lin Xu, Rong Sun Feb 2026

Triphenylmethane-Derived Levelers For High-Speed Redistribution Layer Copper Electroplating Of Tailored Surface Morphologies, Zi-Hao Song, Wei-Bin Wang, Xiao-Hui Liu, Xiao-Min Han, Yi Zhou, Rui Huang, Yan-Xia Jiang, Zhe Li, Xiao-Wei Liu, Mei-Ling Xiao, Hong-Gang Liao, Wei-Lin Xu, Rong Sun

Journal of Electrochemistry

Redistribution Layer (RDL), composed of layered dielectrics and electroplated copper materials, is a basic structure to rearrange numerous I/O pads on the chip surface in wafer-level advanced packaging. As the key chemicals in electrolyte baths, electroplating additives have undergone continuous development to meet the industrial needs for high-speed and fine-line/fine-pitch applications. Meanwhile, the intricate relationships between additive chemical structures and electroplated copper properties are yet to be well understood. In this work, a pair of triphenylmethane-based dye molecules, i.e., gentian violet (GV) and methyl green (MG), was comparatively investigated as levelers for high-speed RDL copper electroplating. Compared to GV, significantly …

Go to article

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu Feb 2026

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu

Journal of Electrochemistry

The redox active species in all-vanadium redox flow batteries (VRFBs) reside in the electrolyte, while the heterogeneous reactions occur on the electrode surface; the electrode is therefore the decisive platform for dynamic adsorption, electron transfer, and ion conversion, especially for the VO2+/VO2+ and V2+/V3+ couples. One of the major challenges for VRFBs is the slow charge transfer in VO2+/VO2+ and V2+/V3+ reactions, mainly caused by poor catalytic performance of electrodes and weak adhesion of catalysts to electrodes. This review focuses on the key challenges and recent …

Go to article

An Electrochemiluminescence-Based Arsenic (Iii) Sensor Using Luminol On Screen-Printed Gold Electrodes, Harmesa Harmesa, Isnaini Rahmawati, Andrea Fiorani, Yasuaki Einaga, Eny Kusrini, A’An Johan Wahyudi, Asep Saefumillah, Tribidasari A Ivandini Feb 2026

An Electrochemiluminescence-Based Arsenic (Iii) Sensor Using Luminol On Screen-Printed Gold Electrodes, Harmesa Harmesa, Isnaini Rahmawati, Andrea Fiorani, Yasuaki Einaga, Eny Kusrini, A’An Johan Wahyudi, Asep Saefumillah, Tribidasari A Ivandini

Journal of Electrochemistry

Electrochemiluminescence (ECL) of luminol has been studied on a screen-printed gold electrode for a simple and sensitive detection of arsenic ions (As(III)). Cyclic voltammetry (CV) was applied as the proposed technique to study luminol’s electrochemical behavior and to evaluate the arsenic’s effect in the ECL system, while hydrogen peroxide (H2O2) served as a co-reactant to enhance luminol’s light emission under alkaline conditions. To achieve optimal electrode performance, key parameters including pH, scan rate, and the concentrations of H2O2 and luminol were carefully optimized. The presence of As(III) induced a quenching effect on the …

Go to article

Control Of Pore Nucleation And Rearrangement Kinetics During Aluminium Anodizing In Phosphoric Acid Electrolyte, Ilya V. Roslyakov, Nikita A. Shirin, Dmitry M. Tsymbarenko, Sergei N. Pavlov, Sergey E. Kushnir, Nikolay V. Lyskov, Kirill S. Napolskii Feb 2026

Control Of Pore Nucleation And Rearrangement Kinetics During Aluminium Anodizing In Phosphoric Acid Electrolyte, Ilya V. Roslyakov, Nikita A. Shirin, Dmitry M. Tsymbarenko, Sergei N. Pavlov, Sergey E. Kushnir, Nikolay V. Lyskov, Kirill S. Napolskii

Journal of Electrochemistry

Anodic aluminium oxide (AAO) porous films with an interpore distance of several hundred nanometers are of great interest due to their unique interaction with visible and near-infrared light, and high thermal stability up to 1500 °C. These porous films are prepared by aluminium anodizing at high voltages in weak acids, leading to a slow kinetics of initial stages of porous structure formation. Here, we propose an approach to accelerate AAO formation in electrolytes based on weak acids such as phosphoric acid. Aluminium foils, pre-patterned using first anodizing under different conditions and subsequent selective dissolution of a sacrificial AAO layer, were …

Go to article

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour Feb 2026

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour

Journal of Sustainable Construction Materials and Technologies

Thermal insulation materials play a significant role in balancing buildings' total carbon emissions. Balancing involves applying the optimized amount of insulation materials to avoid excessive emissions in either the operational or embodied phases. Due to the wide range of insulation materials and variations of their specifications, it is vital to analyse them individually. The focus of this study is to optimize the amount of insulation materials in the facades of Residential Buildings (RB) to balance the amount of Operational Carbon Emissions (OCE) and Embodied Carbon Emissions (ECE) by applying the Building Information Modelling-Life Cycle Assessment (BIM-LCA) integration method. The Life …

Go to article

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib Feb 2026

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib

Journal of Sustainable Construction Materials and Technologies

Integrating sustainable material procurement with construction waste management is essential to reduce construction and demolition waste in Libya, where current practices remain largely reactive and disposal-oriented. This narrative review aims to develop a conceptual framework linking procurement decisions to waste-generation pathways in Libyan construction projects, clarifying how proactive, sustainability-driven purchasing can serve as a primary driver of waste prevention. Using a PRISMA-guided systematic search of Web of Science, Scopus, and IEEE Xplore for 2001–2026, and a bibliometric analysis via VOSviewer, 956 high-quality studies were synthesized to map global knowledge and to expose the paucity of integrated SMP–CWM studies in developing …

Go to article

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan Feb 2026

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan

Journal of Sustainable Construction Materials and Technologies

This study investigates the potential of limestone calcined clay cement (LC3) as a sustainable binder for developing a single-layer composite material incorporating barite and rubber aggregates, hypothesized to achieve enhanced sound insulation performance compared to conventional multi-layered wall systems. Mortars were prepared using LC3 with 55% clinker, 30% metakaolin, 15% limestone, substituting 45% of cement clinker. Hybrid mixtures of barite and rubber aggregates (barite-to-rubber volume ratios of 2:1 and 1:2) were tested at aggregate-to-binder ratios of 2.0, 2.75, and 3.5 to evaluate their combined mass and damping effects on acoustic performance. Experiments were conducted to determine physical, mechanical, and acoustic …

Go to article

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh Feb 2026

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh

Journal of Sustainable Construction Materials and Technologies

Soil stabilization remains a critical challenge in geotechnical engineering, particularly for weak and expansive soils that compromise the safety and serviceability of infrastructure. Traditional stabilizers such as lime and cement have been widely applied; however, their limitations in terms of long-term durability, carbon footprint, and performance under aggressive environmental conditions necessitate alternative approaches. In recent years, geopolymer-based stabilizers derived from industrial by-products such as fly ash (FA), slag, and bottom ash (BA) have emerged as promising substitutes. This review critically examines the comparative performance of lime and geopolymer stabilization with respect to strength development, durability, compressibility, environmental impact, and economic …

Go to article

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P Feb 2026

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P

Journal of Sustainable Construction Materials and Technologies

This study addresses the unresolved gap in quantifying how recycled fine aggregates (RFA) and metakaolin (MK) interact synergistically in self-compacting concrete (SCC), a relationship that previous works have studied only in isolation or without mechanistic justification. Twenty-five SCC mixtures containing MK (0–25%) and RFA (0–100%) were evaluated to generate a unified understanding of fresh behaviour, strength development, pore refinement, interfacial transition zone (ITZ) characteristics, and sustainability indicators. Results show that RFA alone increases water demand and reduces strength, while MK compensates for these losses by densifying the matrix and improving ITZ bonding, as confirmed through SEM analysis. An optimum synergy …

Go to article

Isolated Bacillus Licheniformis Sp01 From Daqing Oilfield In Reducing Chromium(Iii) Crosslinked Polymer Residue And Enhancing Oil Recovery, Xiao Hui Feb 2026

Isolated Bacillus Licheniformis Sp01 From Daqing Oilfield In Reducing Chromium(Iii) Crosslinked Polymer Residue And Enhancing Oil Recovery, Xiao Hui

Student Works (2020-2029)

After polymer gel formation, the residual partially hydrolyzed polyacrylamide (HPAM) and the crosslinker (Cr3+) caused plugging and decreased oil recovery. Microorganisms can degrade HPAM to address the issues, but Cr³⁺ inhibits the process and reduces oil recovery. This study explores the underexamined biodegradation of HPAM and improved oil recovery in the presence of Cr³⁺, offering new perspectives for microbial enhanced oil recovery (MEOR) after polymer gel formation. HPAM and crude oil were innovatively used as the sole nitrogen(N) and carbon(C) sources to isolate the best-growing strain from Daqing Oilfield produced water, identified as Bacillus licheniformis SP01. The oil displacement potential …

Go to article

Assessing The Geomechanical Modelling Of Underground Reservoir For Co₂ Storage Trapping Mechanisms, Bonavian Hasiholan, Mohammed Ali Farea, Elhassan Mostafa Abdallah, Sami Abdelrahman M. Yagoub, Yasir Mukhtar Feb 2026

Assessing The Geomechanical Modelling Of Underground Reservoir For Co₂ Storage Trapping Mechanisms, Bonavian Hasiholan, Mohammed Ali Farea, Elhassan Mostafa Abdallah, Sami Abdelrahman M. Yagoub, Yasir Mukhtar

Mathematical Modelling and Numerical Simulation with Applications

Effective carbon dioxide (CO₂) storage is essential for mitigating climate change amid increasing global greenhouse gas emissions. This study investigates the influence of geomechanics on CO₂ storage performance within carbon capture and storage (CCS), focusing on structural, residual, and solubility trapping mechanisms using a fully coupled modeling framework. Two numerical models, with and without geomechanical effects, are developed to evaluate impacts on reservoir behavior, CO₂ migration, and trapping efficiency. Each mechanism is analyzed separately and within an integrated framework to assess their combined contributions. Results indicate that geomechanical coupling increases reservoir pressure, reduces CO₂ flow velocity, enhances migration control, and …

Go to article

Opportunities And Challenges In Synthetic Biology For Manufacture Of Bulk Chemicals, Xiaolin Shen, Qipeng Yuan Feb 2026

Opportunities And Challenges In Synthetic Biology For Manufacture Of Bulk Chemicals, Xiaolin Shen, Qipeng Yuan

Bulletin of Chinese Academy of Sciences (Chinese Version)

Traditional chemical manufacturing, reliant on fossil resources, meets material demands but faces challenges such as resource depletion, environmental pollution, and carbon emissions. This underscores the urgent need for a shift towards green and sustainable production methods. Biomanufacturing, which uses renewable resources to produce chemicals, offers a promising pathway for the chemical industry’s green transition. In recent years, biomanufacturing has emerged as a key area of global attention. Through synthetic biology, bulk chemicals like 1,3-propanediol have been successfully produced. Nevertheless, biomanufacturing of bulk chemicals still faces significant challenges, including high costs, low efficiency, and limited scalability. This is particularly true for …

Go to article

Comprehensive Review Of Lithium Extraction Processes With Economic And Environmental Analysis, Shayan Abrishami, Maryam Gonbadi, Yasaman Boroumand, Mahsa Golmohammadi, Mehdi Narimani, Amin Sarmadi, Chase Matthews, Humberto Estay, Mehdi Khiadani, Amir Razmjou Feb 2026

Comprehensive Review Of Lithium Extraction Processes With Economic And Environmental Analysis, Shayan Abrishami, Maryam Gonbadi, Yasaman Boroumand, Mahsa Golmohammadi, Mehdi Narimani, Amin Sarmadi, Chase Matthews, Humberto Estay, Mehdi Khiadani, Amir Razmjou

Research outputs 2022 to 2026

The growing need for lithium, primarily driven by the expanding electric car market and increasing energy storage requirements, has created a significant demand for sustainable and efficient lithium extraction techniques. This comprehensive review examines the current state and prospects of lithium extraction technologies from both hard-rock and brine sources, offering an enviro-economic perspective on various production methods. While several reviews have attempted to cover lithium extraction in various aspects, our work specifically focuses on the processes of lithium extraction from different sources. We systematically evaluate traditional hard-rock extraction processes, including sulfating, alkali, chlorination, and carbonizing methods, detailing their mechanisms, efficiencies, …

Go to article

Leaching Of Manganese Using Bio-Solubilized Iron Reductant To Prevent Manganese Carbonate Formation, Palas Kamlakar Borkar, Neha Sharma, Atharva Rane, Kwabena Boafo, Timothy Eisele Feb 2026

Leaching Of Manganese Using Bio-Solubilized Iron Reductant To Prevent Manganese Carbonate Formation, Palas Kamlakar Borkar, Neha Sharma, Atharva Rane, Kwabena Boafo, Timothy Eisele

Michigan Tech Publications

A mixed culture of metal-reducing microorganisms was used to dissolve iron, which was then utilized as a reductant to extract manganese in a 250 mL two-stage bioleaching system. In this two-stage configuration, CO2 generation associated with microbial metabolism occurs in the iron-reduction stage, while MnO2 reduction is confined to a separate manganese-leaching stage, thereby minimizing manganese carbonate formation. The results demonstrated that the two-stage system effectively maintained Fe2+ availability, enhancing manganese dissolution while mitigating loss of manganese through manganese carbonate (MnCO3) formation. In contrast, a single-stage bioleaching approach, where microorganisms directly reduced manganese oxides, led to significant MnCO3 precipitation, …

Go to article

Emerging Trends In Photocatalyst-Based Metal-Organic Frameworks For Pfas Degradation, Ahmad Najafidoust, Roham Ghanbari, Javad Farahbakhsh, Ratish Permala, Stefan Iglauer, Masoumeh Zargar Feb 2026

Emerging Trends In Photocatalyst-Based Metal-Organic Frameworks For Pfas Degradation, Ahmad Najafidoust, Roham Ghanbari, Javad Farahbakhsh, Ratish Permala, Stefan Iglauer, Masoumeh Zargar

Research outputs 2022 to 2026

Per- and polyfluoroalkyl substances (PFAS) are highly persistent pollutants in the environment that pose significant health hazards due to their strong chemical resilience and widespread industrial use. Traditional treatment techniques, such as adsorption and reverse osmosis, often struggle with drawbacks like high energy requirements and limited effectiveness against both short- and long-chain PFAS compounds. Among the innovative degradation methods, photocatalysis has gained attention as a viable solution, especially when coupled with metal-organic frameworks (MOFs). MOFs are particularly suited for this purpose due to their high surface area, customizable structures, and superior light absorption properties. This review highlights the latest developments …

Go to article

Neuproio: A Dual-Action Solid Drug Nanoparticle Topical Formulation For Simultaneous Intraocular Pressure Reduction And Neuroprotection For Glaucoma, Lei Xu, Mu Li, Lin Qi, Tzu Chen Wang, Dong Liu, Vimalin Jeyalatha Mani, Hsin Yin Chuang, Qingbo Yang, Ruipu Mu, Samira Mahdi, Da Huang, Honglan Shi, Yang Hu, Hu Yang Feb 2026

Neuproio: A Dual-Action Solid Drug Nanoparticle Topical Formulation For Simultaneous Intraocular Pressure Reduction And Neuroprotection For Glaucoma, Lei Xu, Mu Li, Lin Qi, Tzu Chen Wang, Dong Liu, Vimalin Jeyalatha Mani, Hsin Yin Chuang, Qingbo Yang, Ruipu Mu, Samira Mahdi, Da Huang, Honglan Shi, Yang Hu, Hu Yang

Chemical and Biochemical Engineering Faculty Research & Creative Works

Glaucoma is a leading cause of irreversible blindness, primarily due to elevated intraocular pressure (IOP) that damages the retina and optic nerve. Most topical glaucoma treatments focus solely on IOP-lowering without direct neuroprotection, as drug delivery to the posterior eye is challenging. Here, we developed NeuProIO, a dual-action solid drug nanoparticle (NP) eye drop for simultaneous IOP reduction and neuroprotection. Using flash nanoprecipitation in a multi-inlet vortex mixer, we fabricated the first NeuProIO solid drug NPs incorporating the repurposed neuroprotective agent maprotiline (MAP) and the IOP-lowering agent betaxolol (BX), forming MAP/BX NPs for synergistic glaucoma treatment. The NeuProIO improved stability …

Go to article

Cationic Poly(Glucosamine)-Based Polymers Bind To Glycans With Varying Affinity Facilitating Transport Across The Glycocalyx Of Endothelial Cells, Claire Bridges, Lu Fu, Dan Wang, James D. Sterling, Susanna Liang, Shenda M. Baker, Jonathan Yeow, Megan S. Lord Feb 2026

Cationic Poly(Glucosamine)-Based Polymers Bind To Glycans With Varying Affinity Facilitating Transport Across The Glycocalyx Of Endothelial Cells, Claire Bridges, Lu Fu, Dan Wang, James D. Sterling, Susanna Liang, Shenda M. Baker, Jonathan Yeow, Megan S. Lord

Business and Information Technology Faculty Research & Creative Works

Natural polysaccharides, such as chitosan, offer promising avenues for drug delivery due to their cytocompatibility and ability to interact with cell surfaces. However, the endothelial glycocalyx, a glycan-rich extracellular matrix, presents a barrier that must be navigated for effective intracellular delivery. This study investigates how cationic poly(glucosamine)-based polymers, functionalized with guanidinium or ammonium groups, interact with key glycocalyx components including hyaluronan (HA) and heparan sulfate (HS). We demonstrate that these cationic polymers form tunable biomolecular condensates with glycans, with stronger binding observed for sulfated glycans, HS and heparin, than unsulfated HA. Derivatized chitosan polymers with varied cationic side chains exhibit …

Go to article

Challenges And Opportunities In Lentivirus Viral Vector Manufacturing For In Vivo Applications, Eduardo Barbieri, Caryn Heldt Feb 2026

Challenges And Opportunities In Lentivirus Viral Vector Manufacturing For In Vivo Applications, Eduardo Barbieri, Caryn Heldt

Michigan Tech Publications

The clinical success of chimeric antigen receptor (CAR) T-cell therapies has revolutionized oncology, yet the high costs and logistical complexities of ex vivo manufacturing remain significant barriers to global patient access. In vivo cell therapy, which involves the direct injection of lentiviral vectors (LVVs) to engineer cells within the patient’s body, offers a promising, cost-effective alternative. However, transitioning from ex vivo to in vivo applications necessitates a fundamental shift in LVV biomanufacturing to ensure safety and efficacy. This paper examines the critical bottlenecks in the current LVV production landscape. In upstream processing, we explore LVV particle assembly and maturation mechanisms, …

Go to article

Data For "Unified Vapor Pressure Correlations For Lanthanide And Actinide Chlorides: An In-Depth Statistical And Thermodynamic Approach", J. Marvin Torrie, Nicolas Marvin Christensen, Kyle Duke, Carlos Mejia, Larry Baxter, Devin Rappleye Feb 2026

Data For "Unified Vapor Pressure Correlations For Lanthanide And Actinide Chlorides: An In-Depth Statistical And Thermodynamic Approach", J. Marvin Torrie, Nicolas Marvin Christensen, Kyle Duke, Carlos Mejia, Larry Baxter, Devin Rappleye

ScholarsArchive Data

This submission contains machine readable data (.csv) for all data from the publication "Unified Vapor Pressure Correlations for Lanthanide and Actinide Chlorides: An In-depth Statistical and Thermodynamic Approach". It contains the data contained in all figures in the paper and its supplementary material except for the water vapor pressure data in Figures 1 and 2. In addition, this submission contains all the original vapor pressure measurements (241 sets) from the sources reviewed in the paper.  Sufficient information is provided that readers can identify the original sources of these data sets if needed.

Go to article

Ice-Templated Zwitterionic Sponge Hydrogels For Stable And Efficient Solar Desalination In High-Salinity Brines, Louis D. Zhang, Yanhui Zhang, Peng Xiao, Chang Zhang Feb 2026

Ice-Templated Zwitterionic Sponge Hydrogels For Stable And Efficient Solar Desalination In High-Salinity Brines, Louis D. Zhang, Yanhui Zhang, Peng Xiao, Chang Zhang

University Research

Solar-driven steam generation (SSG) offers a sustainable pathway for desalination, yet achieving temperature-regulated control over macroporous structures in salt-tolerant hydrogels remains a critical challenge. Here, we report a carbon black-coated PDMAPS sponge hydrogel (PDMAPS-CB-SH) fabricated via an ice-templated polymerization strategy, where the pore size and connectivity are tuned by regulating ice-crystal growth at different prefreezing temperatures. The optimized PDMAPS-CB-SH integrates abundant interconnected pores with the intrinsic antipolyelectrolyte effect of zwitterionic networks, enabling rapid water transport and stable swelling in brines up to 10 wt % NaCl. Upon incorporation of carbon black nanoparticles, the hydrogel evaporator achieves a high evaporation rate …

Go to article

In-Situ Carbon Mineralization Through Injection Of Co2-Saturated Water Into Basalts: Effects On Pore Network, Seyi Philemon Akanji, Lionel Esteban, Ausama Giwelli, Joel Sarout, Alireza Keshavarz, Stefan Iglauer Feb 2026

In-Situ Carbon Mineralization Through Injection Of Co2-Saturated Water Into Basalts: Effects On Pore Network, Seyi Philemon Akanji, Lionel Esteban, Ausama Giwelli, Joel Sarout, Alireza Keshavarz, Stefan Iglauer

Research outputs 2022 to 2026

Carbon capture and storage (CCS) offers the potential to remove and safely store significant quantities of carbon dioxide from the atmosphere, thereby limiting global warming. Conventional geological storage involves injecting CO2, in gaseous or supercritical state, into porous rock reservoirs, relying on geological top seals, capillary forces and/or dissolution in groundwater as the primary “locking-in” processes. An alternative method injects CO2-saturated water into mafic rocks (basalts), chemically inducing in-situ mineralization of CO2 to form solid carbonate minerals. This mechanism offers the lowest risk of carbon returning to the atmosphere. This review synthesizes field and laboratory studies on CO2 mineralization in …

Go to article

Treatment And Valorization Of Spent Caustic Brine: A Critical Review With Emphasis On Membrane Technologies, Rouba D. Al Bostami, Amani Al Othman, Muhammad Tawalbeh, Kerry N. Mcphedran, Mohammad Mahdi A. Shirazi Feb 2026

Treatment And Valorization Of Spent Caustic Brine: A Critical Review With Emphasis On Membrane Technologies, Rouba D. Al Bostami, Amani Al Othman, Muhammad Tawalbeh, Kerry N. Mcphedran, Mohammad Mahdi A. Shirazi

Research outputs 2022 to 2026

Spent caustic brine (SCB) is a hazardous yet resource-rich industrial waste, primarily composed of sodium hydroxide, water, and contaminants such as sulfides, phenols, organic compounds, heavy metals, and valuable minerals. Originating from industries such as oil and gas, metal finishing, and food processing, SCB poses high pH ('11), high total dissolved solids (up to 58,000 ppm), heavy metal content, and elevated chemical oxygen demand (COD). In this work, treatment and valorization methods for SCB are categorized into three groups: traditional techniques without caustic or water recovery, conventional techniques with limited recovery, and membrane technologies offering effective caustic and water recovery …

Go to article

Optimization Of Pressure And Flow Rate For Co2 Microbubble Generation Using Porous Ceramic Membrane: Insights For Co₂ Geological Storage, Malek Jalilian, Tawanda Matamba, David Tang, Alireza Keshavarz, Stefan Iglauer Feb 2026

Optimization Of Pressure And Flow Rate For Co2 Microbubble Generation Using Porous Ceramic Membrane: Insights For Co₂ Geological Storage, Malek Jalilian, Tawanda Matamba, David Tang, Alireza Keshavarz, Stefan Iglauer

Research outputs 2022 to 2026

CO2 microbubbles show significant potential in carbon capture and storage (CCS) through enhancing CO2 dissolution and improving the residual trapping mechanism. To take full advantage of microbubbles, maximizing their generation by selecting the optimal operational conditions, including injection pressure and flow rate, is essential. In this study, we examined a wide range of experimental conditions to quantitatively evaluate the potential of a porous ceramic membrane for producing CO2 microbubbles in a chemical-free manner. In particular, the effects of injection pressure (5.0–10.0 MPa) and CO2 flow rate (0.25–5 mL/min) on mean bubble diameter (DMB) and microbubble yield efficiency (YMB) were systematically …

Go to article

Enhancing Solar Energy Harvesting: A Comprehensive Study On Photothermal Conversion In Tin/Mxene-Mof Hybrid Nanofluids, Seyedeh Zahra Haeri, Ali Dashan, Javad Farahbakhsh, Mehdi Khiadani, Bahram Ramezanzadeh, Masoumeh Zargar Feb 2026

Enhancing Solar Energy Harvesting: A Comprehensive Study On Photothermal Conversion In Tin/Mxene-Mof Hybrid Nanofluids, Seyedeh Zahra Haeri, Ali Dashan, Javad Farahbakhsh, Mehdi Khiadani, Bahram Ramezanzadeh, Masoumeh Zargar

Research outputs 2022 to 2026

The growing global energy demand highlights the need for renewable sources like solar energy as a key component of sustainable systems. This study focuses on developing two hybrid nanofluids, TiNML125 and MXML125, for optimizing solar energy harvesting. These nanofluids were synthesized via a solvothermal process, combining NH₂-MIL-125 with plasmonic nanoparticles, titanium nitride (TiN) and MXene (MX). Their thermal conductivity, stability, optical properties, and photothermal efficiency were analyzed. Results showed both nanofluids significantly outperformed single-component ML125, with TiNML125 improving absorption by 40 % and enhancing thermal conductivity. MXML125 demonstrated superior long-term stability, with a 25 % lower zeta potential reduction over …

Go to article

Hybrid Data-Driven Cement-Stabilized Soil Design: An Integration Of Machine Learning, Multi-Objective Optimization, And Life Cycle Assessment, Chikezie Chimere Onyekwena, Yunli Li, Ikenna J. Okeke, Ubani Obinna Uzodimma, Monday Uchenna Okoronkwo, Wenping Wu Feb 2026

Hybrid Data-Driven Cement-Stabilized Soil Design: An Integration Of Machine Learning, Multi-Objective Optimization, And Life Cycle Assessment, Chikezie Chimere Onyekwena, Yunli Li, Ikenna J. Okeke, Ubani Obinna Uzodimma, Monday Uchenna Okoronkwo, Wenping Wu

Chemical and Biochemical Engineering Faculty Research & Creative Works

Soil stabilization is crucial in geotechnical engineering, yet conventional methods are often time-consuming, resource-intensive, and environmentally unsustainable. Despite growing interest in Machine Learning (ML) and optimization tools for mix design, few studies integrate these methods with decision-making techniques and environmental assessment to support practical implementation. This study proposes a hybrid data-driven framework for predicting strength, optimizing mix compositions, and evaluating environmental impacts via life cycle assessment of cement-stabilized soft soils. Six ML models were evaluated, and the top-performing eXtreme Gradient Boosting (XGB) model was further improved using the Grey Wolf Optimizer (GWO). The optimized XGB-GWO model, integrated with a polynomial …

Go to article

Performance And Mechanistic Insights Into Cement Systems Modified With Wastewater-Recovered Struvite, Ugochukwu Ewuzie, Rupack R. Halder, Abdulkareem O. Yusuf, Abiodun A. Saka, Godwin I. Ogbuehi, Titus C. Egbosiuba, Damilola A. Daramola, Monday Uchenna Okoronkwo Feb 2026

Performance And Mechanistic Insights Into Cement Systems Modified With Wastewater-Recovered Struvite, Ugochukwu Ewuzie, Rupack R. Halder, Abdulkareem O. Yusuf, Abiodun A. Saka, Godwin I. Ogbuehi, Titus C. Egbosiuba, Damilola A. Daramola, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Struvite, the stable hydration product and primary strength phase in magnesium ammonium phosphate cement (MAPC), derived from wastewater treatment, has recently been utilized as a sustainable additive to Portland cement (PC). However, its impacts on cement hydration kinetics, pore refinement, rheology, and the mechanisms underlying these processes have not been comprehensively studied. This study developed Portland cement-struvite (PCS) systems by replacing PC with 3–20 % struvite (ST wt.%: PCS3–PCS20) and evaluated these processes using isothermal calorimetry, 3D micro-computed tomography (μXCT), time-dependent rheometry, X-ray diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR), and the Krstulović-Dabić (K-D) model. The FTIR/XRD confirmed the coexistence …

Go to article

Nanocatalytic Enhancement Of Local Heat Transfer In Continuous-Flow Thermal Reactors, Nasser Zouli, Nujud Maslamani, Ayman Yousef, Muthanna H. Al-Dahhan Feb 2026

Nanocatalytic Enhancement Of Local Heat Transfer In Continuous-Flow Thermal Reactors, Nasser Zouli, Nujud Maslamani, Ayman Yousef, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

An experimental investigation was conducted to evaluate the thermal conductivity (TC) and local heat-transfer coefficients (LHTCs) of nanofluids containing alumina (Al2O3), hematite (Fe2O3), and copper oxide (CuO) nanoparticles dispersed in deionized water. A newly developed non-invasive LHTC probe was integrated into the inner wall of the test section to enable direct quantification of interfacial heat-transfer performance. The measurements were conducted under laminar and turbulent flow conditons across Reynolds numbers ranging from 1000 to 10,000. The selected nanoparticles were chosen based on their high intrinsic thermal conductivity, cost effectiveness, and, in the case …

Go to article

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar Jan 2026

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Go to article

First Prev Next Last