Chemical Engineering Commons^™

Generation Of Phase Transitions Boundaries Via Convolutional Neural Networks, Christopher Alexis Ibarra

Open Access Theses & Dissertations

Accurate mapping of phase transitions boundaries is crucial in accurately modeling the equation of state of materials. The phase transitions can be structural (solid-solid) driven by temperature or pressure or a phase change like melting which defines the solid-liquid melt line. There exist many computational methods for evaluating the phase diagram at a particular point in temperature (T) and pressure (P). Most of these methods involve evaluation of a single (P,T) point at a time. The present work partially automates the search for phase boundaries lines utilizing a machine learning method based on convolutional neural networks and an efficient search …

Carbon Fibers From Bio-Based Precursors Derived From Renewable Sources, Sagar Kanhere

All Dissertations

Carbon fibers have the highest strength and modulus among all known fibers and are used as reinforcements in high-performance composites [1]. Carbon fibers also have a very low density relative to metals. Therefore, carbon fibers possess ultrahigh specific strength and modulus, which make them desirable for high-performance light-weight composites. A vast majority of commercial carbon fibers are produced from PAN precursors that are expensive, which limits the use of PAN-derived carbon fibers to aerospace applications (e.g., airplanes). However, for costsensitive applications, there is a need for low-cost, moderate performance carbon fibers. Lignin is a low-cost by-product of pulping and biorefining …

Development Of Enzyme-Responsive Polymersomes As A Drug Delivery System For Gm1 Gangliosidosis, Bipin Chakravarthy Paruchuri

All Dissertations

GM1 gangliosidosis is a lysosomal storage disorder caused by deficiency of β-galactosidase (βgal) and subsequent accumulation of GM1 ganglioside in lysosomes. The rare nature of this disorder presents challenges with prognosis and treatment. Enzyme replacement therapy (ERT) can effectively treat systemic deficiencies, but the intravenously administered enzyme cannot cross the blood-brain barrier (BBB) to treat the central nervous system. A delivery system to encapsulate and deliver the enzyme can facilitate enzyme transport across the BBB with suitable surface modifications. One of the pathological aspects of GM1-affected cells is the upregulation of the lysosomal enzyme hexosaminidase A (HexA). In this dissertation, …

Profiling And Engineering The Unfolded Protein Response In Therapeutic Protein-Producing Cho Cell Lines, Dyllan Rives

All Dissertations

Industrial Chinese hamster ovary (CHO) production of therapeutics requires cell lines with high secretory capacity to avoid an accumulation of improperly folded proteins, or endoplasmic reticulum (ER) stress. This presents a challenging engineering bottleneck. The unfolded protein response (UPR) is initiated to overcome ER stress and reestablish homeostasis. In this dissertation, the impacts of ER stress and the UPR on protein production in mammalian cells are detailed, and both selection- and rational-based strategies for enhancing the ER stress response in productive CHO cell lines are reviewed. This project aims to expand on recent research efforts for engineering ER stress-related responses …

Water-Soluble Saponins Accumulate In Drought-Stressed Switchgrass And May Inhibit Yeast Growth During Bioethanol Production, Sarvada Hemant Chipkar, Katherine Smith, Elizabeth M. Whelan, Derek J. Debrauske, Annie Jen, Katherine A. Overmyer, Andrea Senyk, Larkin Hooker-Moericke, Marissa Gallmeyer, Joshua J. Coon, A. Daniel Jones, Trey K. Sato, Rebecca G. Ong

Michigan Tech Publications, Part 1

Background: Developing economically viable pathways to produce renewable energy has become an important research theme in recent years. Lignocellulosic biomass is a promising feedstock that can be converted into second-generation biofuels and bioproducts. Global warming has adversely affected climate change causing many environmental changes that have impacted earth surface temperature and rainfall patterns. Recent research has shown that environmental growth conditions altered the composition of drought-stressed switchgrass and directly influenced the extent of biomass conversion to fuels by completely inhibiting yeast growth during fermentation. Our goal in this project was to find a way to overcome the microbial inhibition and …

Materials Discovery Of Ion-Selective Membranes Using Artificial Intelligence, Reza Maleki, Seyed Mohammadreza Shams, Yasin Mehdizadeh Chellehbari, Sima Rezvantalab, Ahmad Miri Jahromi, Mohsen Asadnia, Rouzbeh Abbassi, Tejraj Aminabhavi, Amir Razmjou

Research outputs 2022 to 2026

Significant attempts have been made to improve the production of ion-selective membranes (ISMs) with higher efficiency and lower prices, while the traditional methods have drawbacks of limitations, high cost of experiments, and time-consuming computations. One of the best approaches to remove the experimental limitations is artificial intelligence (AI). This review discusses the role of AI in materials discovery and ISMs engineering. The AI can minimize the need for experimental tests by data analysis to accelerate computational methods based on models using the results of ISMs simulations. The coupling with computational chemistry makes it possible for the AI to consider atomic …

Multi-Criteria Decision Matrix Method In The Risk Analysis Of Biodiesel Production Processes, Kaylee Alles

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Renewable fuel technologies aim to mitigate the non-renewability of fossil fuels, challenges with increased energy demand, and the climate impact of fossil fuel emissions. However, before investing in renewable technologies, there need to be decision strategies that assess and identify the best alternatives according to stakeholder priorities. There is also a concern about whether the technologies that are the “most sustainable” effectively meet the acceptable risk requirements of stakeholders. In response to this question, a risk-adapted multi-criteria decision model was developed and compared to a sustainability study that evaluated five renewable diesel technologies, including Green Diesel I, II, and III; …

Enhancing Human Schwann Cells Reparative Behavior Using Heparin/Collagen Layer-By-Layer Coatings, Luis Carlos Pinzon-Herrera

Graduate Theses and Dissertations

When a peripheral nerve injury (PNI) occurs, the gold standard for tissue regeneration is the use of autografts. However, due to the secondary effects produced by multiple surgeries involved in the removal and implantation of autografts for very small lesions, it is possible to replace them with the use of Nerve Guide Conduits (NGCs). However, NGCs are limited to short lesions (less than 1 cm). This limitation is caused by the absence of compounds in the extracellular matrix (ECM) that autografts can provide. Since much of the regenerative process takes place on the NGC surface, our work aims to modify …

Using Copper Oxide And Zwitterions To Prevent Membrane Fouling And Optimizing Ultrafiltration Membrane Fabrication With Green Solvents, Cannon Hackett

Graduate Theses and Dissertations

Membrane fouling and sustainable production of membranes are two of the most important challenges in membrane science. Chapter 1 of this dissertation introduces these challenges and covers previous research that has been done in those areas. Additionally, the objectives of this dissertation are stated. In chapter 2, a study was done in which polyethersulfone ultrafiltration membranes were functionalized with copper oxide nanoparticles and zwitterions for the purpose of reducing fouling on the membrane surface. Characterization confirmed the attachment of each component to the membranes. Dead-end filtration was performed with water and bovine serum albumin solution and showed that the functionalization …

Live Imaging Of Micro And Macro Wettability Variations Of Carbonate Oil Reservoirs For Enhanced Oil Recovery And Co/ Trapping/Storage, Anastasia Ivanova, A. Orekhov, S. Markovic, Stefan Iglauer, P. Grishin, A. Cheremisin

Research outputs 2022 to 2026

Carbonate hydrocarbon reservoirs are considered as potential candidates for chemically enhanced oil recovery and for CO² geological storage. However, investigation of one main controlling parameter—wettability—is usually performed by conventional integral methods at the core-scale. Moreover, literature reports show that wettability distribution may vary at the micro-scale due to the chemical heterogeneity of the reservoir and residing fluids. These differences may profoundly affect the derivation of other reservoir parameters such as relative permeability and capillary pressure, thus rendering subsequent simulations inaccurate. Here we developed an innovative approach by comparing the wettability distribution on carbonates at micro and macro-scale by combining live-imaging …

Artificial Neural Network For Predicting Heat Transfer Rates In Supercritical Carbon Dioxide, Vinusha Dasarla Giri Babu

Doctoral Dissertations and Master's Theses

Supercritical carbon dioxide as a working fluid in a closed Brayton cycle is proving to be more efficient than a conventional steam-based Rankine engine. Understanding the heat transfer properties of supercritical fluids is important for the design of a working engine cycle. The thermophysical properties of supercritical fluids tend to vary non-linearly near the pseudo-critical region. Traditionally, empirical correlations are used to calculate the heat transfer coefficient. It has been shown in the literature and within our own studies that these correlations provide inaccurate predictions near the pseudo-critical line, where heat transfer may be deteriorated or enhanced, resulting from strong …

Study Of Sustainable Development In Paper, Printing And Packaging Material Applications To Support Circular Economy, Prashant Ramesh Kotkar

Dissertations

To support circular economy and sustainability, the use of suitable material in paper, printing, and packaging industries, for several types of industrial printing material and printed product applications, plays a significant role for end user applications. Several types of packaging printing materials, specifically those finished with different printing technologies and exposed to different environmental conditions are targeted.

The purpose of this research study is to improve design and evaluation for paper, printing, and packaging material sustainability in end-user applications, to deal with the addressed sustainability issues brought by the paper, printing and packaging products end user groups. As the impacts …

Post-Translational Modifications And Age-Related Hearing Loss, Parveen Bazard, Jennifer Pineros, Alejandro A. Acosta, Mark Thivierge, Lauren R. Paganella, Samuel Zucker, Freyda L. Mannering, Shrikar Modukuri, Xiaoxia Zhu, Robert D. Frisina, Bo Ding

Chemical and Biochemical Engineering Faculty Research & Creative Works

Post-translational modifications (PTMs) affect nearly all systems of the human body due to their role in protein synthesis and functionality. These reversible and irreversible modifications control the structure, localization, activity, and properties of proteins. For this reason, PTMs are essential in regulating cellular processes and maintaining homeostasis. Diseases such as Alzheimer's, cardiovascular disease, diabetes, cancer, and many others have been linked to dysfunctions of PTMs. Recent research has also shown that irregularities in PTMs can be linked to hearing loss, including age-related hearing loss (ARHL) – the number one communication disorder and one of the top neurodegenerative diseases in our …

Deep Learning Of Microstructures, Amir Abbas Kazemzadeh Farizhandi

Boise State University Theses and Dissertations

The internal structure of materials also called the microstructure plays a critical role in the properties and performance of materials. The chemical element composition is one of the most critical factors in changing the structure of materials. However, the chemical composition alone is not the determining factor, and a change in the production process can also significantly alter the materials' structure. Therefore, many efforts have been made to discover and improve production methods to optimize the functional properties of materials. The most critical challenge in finding materials with enhanced properties is to understand and define the salient features of the …

Metabolic Engineering Of Yarrowia Lipolytica For Enhanced Peroxisomal Production Of Polyhydroxyalkanoates, Michael Spagnuolo

All Dissertations

Traditional chemical processes are made inefficient by the generation of side products and reactions that fail to reach completion. Bioprocesses, on the other hand, lose product potential due to the necessity of growing the organism required to produce the desired compounds. The field of metabolic engineering often seeks to alter this balance between product formation and cell growth to generate more product from the same quantity of feed (reagent). In addition to balance, such organisms may also be engineered to produce the desired products from nontraditional substrates, such as waste compounds. In resource-poor environments, the ability to produce a wanted …

Synthesis And Characterization Of Aerogels From Cellulose-Starch Mixtures For Advanced Packaging Applications, Angel Sagardui

Chemical Engineering Undergraduate Honors Theses

Biodegradable, highly porous, ultra-lightweight, and high-surface-area aerogels from microcrystalline cellulose (MCC) and corn starch mixtures were synthesized through a simple, green process, specifically supercritical carbon dioxide (SC-CO2) drying. Five weight ratios of samples were generated (pure MCC, 2:1 MCC-starch, 1:1 MCC-starch, 1:2 MCC-starch, and pure starch) and were then subjected to a variety of characterization experiments relating to textural and thermal properties as well as morphology, crystallinity, and chemical interactions. Overall, the 1:2 MCC-starch aerogel had the lowest density (0.04 g/cm3), and highest porosity (97%). Conversely, the pure MCC aerogel demonstrated the highest mechanical strength (Young’s modulus of 48.9 MPa), …

Elucidation Of Active Site And Mechanism Of Metal Catalysts Supported In Nu-1000, Hafeera Shabbir

All Dissertations

Advances in extraction of shale oil and gas has increased the production of geographically stranded natural gas (primarily consisting of methane (C1) and ethane (C2)) that is burned on site. A potential utilization strategy for shale gas is to convert it into fuel range hydrocarbons by catalytic dehydrogenation followed by oligomerization by direct efficient catalysts. This work focuses on understanding metal cation catalysts supported on metal-organic framework (MOF) NU-1000 that will actively and selectively do this transformation under mild reaction conditions, while remaining stable to deactivation (via metal agglomeration or sintering). I built computational models validated by experimental methods to …

Life Cycle Assessment Of Novel Electrochemical Struvite Recovery In Municipal Wastewater Treatment At The Plant And U.S. Watershed Scales, Karla Morrissey

Graduate Theses and Dissertations

As the supply of phosphorus decreases, nutrient recovery in municipal wastewater treatment has become an important area of research. Recovery methods for phosphorus-containing fertilizers, such as struvite, and other products are currently being developed and assessed for their efficiency and economic feasibility. Potential environmental impacts from nutrient recovery are also being assessed as design for the environment is important, especially with regards to the eutrophying potential of phosphorus in phosphorus-limited freshwater aquatic systems. Life cycle assessment (LCA) is a tool that can be used to estimate potential environmental impacts of a product or service focusing on its entire life cycle. …

Investigations Of Prokaryotic Defense Systems, Hannah Domgaard

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Bacteria are constantly threatened with infection by mobile genetic elements (MGE) such as bacteriophage and plasmids. Bacteriophage and plasmids require the bacteria's cellular infrastructure to replicate their genomes. Rampant replication can lead to cell death which is one reason why bacteria have developed a diverse array of immune systems to prevent or limit infection. This thesis studies three types of bacterial immune systems, type IV-A CRISPR-Cas (Clustered Regularly Interspaced Short Palindromic Repeat –CRISPR associated), type V-A2 CRISPR-Cas systems, and Wadjet systems.

The type IV-A system lies adjacent to a dinG-like helicase gene. Research has shown that this system can target …

Anion Alloying Of Iii-V Semiconductors For Water Splitting., Sonia Calero-Barney

Electronic Theses and Dissertations

The challenge of solar energy conversion and storage translates into the discovery and development of semiconductor materials that can transform sunlight energy into electricity and/or high-energy-density fuels in a cost-effective way. From the solar energy conversion perspective, cation-alloyed III-V solar cells hold record-breaking energy conversion efficiencies, while anion-alloyed III-V’s are particularly interesting for photoelectrochemical hydrogen generation. The major challenge for the adoption of III-V-based technologies lies in the high manufacturing costs of established synthesis techniques and the difficulty to control the composition of ternary alloys. One of the materials investigated in this work is GaSb_zP_1-z. Thermodynamic …

Surface-Driven Instabilities At Oil-Water Interfaces, Anelisse Claros Mendieta

Graduate Theses and Dissertations

Fluid-fluid interactions are such a wide area and can be observed in different scenarios such as geothermal systems, waterflooding of reservoirs, oil recovery, and water treatment processes. This thesis aims to deepen the understanding of fluid-fluid interactions which include Marangoni flows, charge related instabilities, and surface activity. This thesis studied the interactions of micrometer-sized droplets of an oil (toluene) with surfactant Di-(2-ethylhexyl) phosphoric acid (DEHPA) in the aqueous phase. One of the main goals is to understand several surface-driven instabilities and how those can be manipulated for future applications.Furthermore, this thesis aims to use these oil-surfactant droplets as a medium …

Hydrothermal Preprocessing Of Waste Corn Stover Into Advanced Biorefinery Feedstock, Md Tahmid Islam

Theses and Dissertations

Waste corn stover is one of the most abundant agronomic resources in U.S., however, those are either incinerated or unprocessed in the field to avoid high logistical cost, economic forfeiture, and environmental complications. Hydrothermal carbonization (HTC) is a promising thermochemical process that transforms wet biomass like waste corn stover into a solid fuel called hydrochar, process liquid, and process gas. The recycle of process liquid is warranted as the HTC process liquid contains organic acid that would increase the mass yield and fuel quality of the hydrochar by catalyzing the HTC reactions. HTC also promotes the fuel quality by densifying …

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …

Relative Rate Observer Self-Tuning Of Fuzzy Pid Virtual Inertia Control For An Islanded Microgrid, Ahmed H. Mohamed, Helmy M. El Zoghby, Mohiy Bahgat, A. M. Abdel Ghany

Future Engineering Journal

Expanding the usage of renewable energy in islanded microgrids leads to a reduction in its total inertia. Low inertia microgrids have difficulties in voltage and frequency control. That affected saving its stability and preventing a blackout. To improve low inertia islanded microgrids' dynamic response and save their stability, this paper presented relative rate observer self-tuning fuzzy PID (RROSTF-PID) based on virtual inertia control (VIC) for an islanded microgrid with a high renewable energy sources (RESs) contribution. RROSTF-PID based on VIC's success in showing remarkable improvement in the microgrid's dynamic response and enhancement of its stability. Moreover, it handles different contingency …

Cybersecurity And Dynamic Operation In Practice: Equipment Impacts And Safety Guarantees, Kip Nieman, Dominic Messina, Matthew Wegener, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Though dynamic operation of chemical processes has been extensively explored theoretically in contexts such as economic model predictive control or even considering the potential for cyberattacks on control systems creating non-standard operating policies, important practical questions remain regarding dynamic operation. In this work, we look at two of these with particular relevance to process safety: (1) evaluating dynamic operating policies with respect to process equipment fidelity and (2) evaluating procedures for determining the parameters of an advanced control law that can promote both dynamic operation as well as safety if appropriately designed. Regarding the first topic, we utilize computational fluid …

Insight Into The Effects Of Cation Disorder And Surface Chemical Residues On The Initial Coulombic Efficiency Of Layered Oxide Cathode, Jin-Li Liu, Han-Feng Wu, Zhi-Bei Liu, Ying-Qiang Wu, Li Wang, Feng-Li Bei, Xiang-Ming He

Journal of Electrochemistry

Lithium layered oxide LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) is one of the most promising cathode materials in high-energy lithium-ion batteries for electric vehicles. However, one drawback for NCM622 is that its initial coulombic efficiency (ICE) is only about 87%, which is at least 6% lower than that of LiCoO₂ or LiFePO₄. In this work, we investigated the effects of surface chemical residues (e.g., LiOH and Li₂CO₃) and Li/Ni cation disorder resulted during the sintering on the ICE. We found that the ICE of the as-prepared samples could be boosted …

In Vitro Models For The Study Of Liver Biology And Diseases: Advances And Limitations, Savneet Kaur, Srivatsan Kidambi, Martí Ortega-Ribera, Le Thi Thanh Thuy, Natalia Nieto, Victoria C. Cogger, Wei-Fen Xie, Frank Tacke, Jordi Gracia-Sancho

Department of Chemical and Biomolecular Engineering: Faculty Publications

In vitro models of liver (patho)physiology, new technologies, and experimental approaches are progressing rapidly. Based on cell lines, induced pluripotent stem cells or primary cells derived from mouse or human liver as well as whole tissue (slices), such in vitro single- and multicellular models, including complex microfluidic organ-on-a-chip systems, provide tools to functionally understand mechanisms of liver health and disease. The International Society of Hepatic Sinusoidal Research (ISHSR) commissioned this working group to review the currently available in vitro liver models and describe the advantages and disadvantages of each in the context of evaluating their use for the study of …

The Hole Sealing Technology Of Solid-Liquid Materials With Three Pluggings And Two Injections For Gas Extraction Hole In The Coal Mine, Shiyao Yu, Xianbo Su, Jinxing Song, Qian Wang, Zhenjiang You

Research outputs 2022 to 2026

The sealing quality of the gas extraction holes determines the extracted gas concentration. Based on this, the paper reveals the basic principle of hole sealing by analyzing the gas leakage mechanism of the borehole. The hole sealing technology of solid-liquid materials with three pluggings and two injections for the gas extraction hole is proposed, and the hole sealing device and material are developed. Through testing the granularity distribution of the solid material, as well as the surface tension and contact angle of the slurry, the hole sealing material that can meet the requirements of accessible, sticky, and anti-deformation is selected. …

Genetic Code Expansion In Pseudomonas Putida Kt2440, Xinyuan He, Tian Gao, Yan Chen, Kun Liu, Jiantao Guo, Wei Niu

Department of Chemical and Biomolecular Engineering: Faculty Publications

Pseudomonas putida KT2440 is an emerging microbial chassis for bio-based chemical production from renewable feedstocks and environmental bioremediation. However, tools for studying, engineering, and modulating protein complexes and biosynthetic enzymes in this organism are largely underdeveloped. Genetic code expansion for the incorporation of unnatural amino acids (unAAs) into proteins can advance such efforts and, furthermore, enable additional controls of biological processes of the strain. In this work, we established the orthogonality of two widely used archaeal tRNA synthetase and tRNA pairs in KT2440. Following the optimization of decoding systems, four unAAs were incorporated into proteins in response to a UAG …

Histone Deacetylase 4 And 5 Translocation Elicited By Microsecond Pulsed Electric Field Exposure Is Mediated By Kinase Activity, Zahra Safaei, Gary L. Thompson Iii

Henry M. Rowan College of Engineering Departmental Research

Electroporation-based technologies using microsecond pulsed electric field (µsPEF) exposures are established as laboratory and clinical tools that permeabilize cell membranes. We demonstrate a µsPEF bioeffect on nucleocytoplasmic import and export of enzymes that regulate genetic expression, histone deacetylases (HDAC) -4 and -5. Their μsPEF-induced nucleocytoplasmic transport depends on presence and absence of extracellular calcium ions (Ca2+) for both MCF7 and CHO-K1 cells. Exposure to 1, 10, 30 and 50 consecutive square wave pulses at 1 Hz and of 100 µs duration with 1.45 kV/cm magnitude leads to translocation of endogenous HDAC4 and HDAC5. We posit that by eliciting a rise …