Open Access. Powered by Scholars. Published by Universities.®

Chemical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2521 - 2550 of 14249

Full-Text Articles in Chemical Engineering

The Taphonomic Character, Occurrence, And Persistence Of Upper Permian–Lower Triassic Plant Assemblages In The Mid-Paleolatitudes, Bogda Mountains, Western China, Robert A. Gastaldo, Mingli Wan, Wan Yang Jan 2023

The Taphonomic Character, Occurrence, And Persistence Of Upper Permian–Lower Triassic Plant Assemblages In The Mid-Paleolatitudes, Bogda Mountains, Western China, Robert A. Gastaldo, Mingli Wan, Wan Yang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Bogda Mountains, Xianjiang Uygur Autonomous Region, Western China, Expose an Uppermost Permian–Lower Triassic Succession of Fully Continental Strata Deposited Across Three Graben (Half Graben) Structures in the Mid-Paleolatitudes of Pangea. a Cyclostratigraphy Scheme Developed for the Succession is Subdivided into Three Low-Order Cycles (Wutonggou, Jiucaiyuan, Shaofanggou). Low-Order Cycles Are Partitioned into 1838 High-Order Cycles based on Repetitive Environmental Changes, and their Plant Taphonomic Character is Assessed in . 4700 M of High-Resolution, Measured Sections Distributed Across ~ 100 Km. Four Taphonomic Assemblages Are Represented By: Permineralized Wood (Both Autochthonous and Allochthonous), Megafloral Adpressions (?parautochthonous and Allochthonous) Identifiable to Systematic …

Go to article

Drainage And Sedimentary Response Of The Northern Andes And The Pebas System To Miocene Strike-Slip Tectonics: A Source To Sink Study Of The Magdalena Basin, S. Zapata, L. Calderon-Diaz, C. Jaramillo, Francisca Oboh-Ikuenobe, J. C. Piedrahita, M. Rodríguez-Cuevas, A. Cardona, E. R. Sobel, M. Parra, V. Valencia, A. Patiño, J. S. Jaramillo-Rios, M. Flores, J. Glodny Jan 2023

Drainage And Sedimentary Response Of The Northern Andes And The Pebas System To Miocene Strike-Slip Tectonics: A Source To Sink Study Of The Magdalena Basin, S. Zapata, L. Calderon-Diaz, C. Jaramillo, Francisca Oboh-Ikuenobe, J. C. Piedrahita, M. Rodríguez-Cuevas, A. Cardona, E. R. Sobel, M. Parra, V. Valencia, A. Patiño, J. S. Jaramillo-Rios, M. Flores, J. Glodny

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Miocene strike-slip tectonics was responsible for creating and closing short-lived (ca. 6 Ma) passages and the emergence of isolated topography in the Northern Andes. These geological events likely influenced the migration and/or isolation of biological populations. To better understand the paleogeography of the Miocene hinterland and foreland regions in the Northern Andes, we conducted a source-to-sink approach in the Magdalena Basin. This basin is located between the Central and Eastern Cordilleras of Colombia and contains an ample Miocene record, which includes Lower Miocene fine-grained strata and Middle Miocene to Pliocene coarsening-up strata. Our study presents a new data set that …

Go to article

Sedimentological And Geochemical Characterization Of A Varved Sediment Record From The Northern Neotropics, Edward Duarte, Jonathan Obrist-Farner, Susan R.H. Zimmerman, Erik T. Brown, Robert Brown Jan 2023

Sedimentological And Geochemical Characterization Of A Varved Sediment Record From The Northern Neotropics, Edward Duarte, Jonathan Obrist-Farner, Susan R.H. Zimmerman, Erik T. Brown, Robert Brown

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Annually resolved sedimentological records (including annual varves) can be used to develop precise chronologies for key climatic and tectonic events. Varved records, however, are most common in high latitude lakes, resulting in a spatial bias with respect to annually resolved records in tropical regions. Here we report on the sedimentology of two sediment cores from Lake Izabal, eastern Guatemala, that contain a well-preserved thinly laminated section spanning ca. 2200 years of the mid-Holocene. We integrate radiocarbon age-depth modeling, sedimentological observations, laminae counting, µX-ray fluorescence scanning, and multivariate statistical analyses to constrain the nature and chronology of the laminations. Our sedimentological …

Go to article

Impact Of Composition And Salinity On Swelling And Gel Strength Of Poly (Acrylamide-Co-Acrylic Acid) Preformed Particle Gel, Ahmed Ben Ali, Reem Elaf, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai Jan 2023

Impact Of Composition And Salinity On Swelling And Gel Strength Of Poly (Acrylamide-Co-Acrylic Acid) Preformed Particle Gel, Ahmed Ben Ali, Reem Elaf, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The effects of various material compositions and reservoir environments on the ultimate strength and swelling kinetics of a commercial preformed particle gel (PPG) have been investigated. This study used different ratios of acrylamide and acrylic acid copolymers with a specific crosslinker concentration. Results have indicated that increasing the acrylic acid proportion enhances the PPGs' ability to swell but weakens their network structure. In contrast, increasing the crosslinker content decreases the swelling ratio and increases the gel strength. The highest equilibrium swelling capacity among the six preformed particle gel samples was obtained for PPG2, which has the highest acrylic acid amount …

Go to article

Prediction Of Single Proppant Terminal Settling Velocity In High Viscosity Friction Reducers By Using Artificial Neural Networks And Xgboost, Xiaojing Ge, Rong Lu, Ghith Biheri, Abdulmohsin Imqam, Baojun Bai Jan 2023

Prediction Of Single Proppant Terminal Settling Velocity In High Viscosity Friction Reducers By Using Artificial Neural Networks And Xgboost, Xiaojing Ge, Rong Lu, Ghith Biheri, Abdulmohsin Imqam, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

High viscosity friction reducers (HVFRs) have been recently gaining more attention and increasing in use, not only as friction-reducing agents but also as proppant carriers. The settling velocity of the proppant is one of the key outputs to describe their proppant transport capability. However, it is influenced by many factors such as fluid properties, proppant properties, and fracture properties. Many empirical/physics-based models and correlations to predict particle settling velocity have been developed. However, they are usually based on certain assumptions and have applicable limits. In contrast, machine learning models can be considered as a black box. The objective of this …

Go to article

Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman Jan 2023

Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gels (PPG) have been widely applied in oilfields to control excessive water production. However, PPG has limited success in treating opening features because the particles can be flushed readily during post-water flooding. We have developed a novel micro-sized Re-crosslinkable PPG (micro-RPPG) to solve the problem. The microgel can re-crosslink to form a bulk gel, avoiding being washed out easily. This paper evaluates the novel microgels' transport and plugging performance through super-permeable channels. Micro-RPPG was synthesized and evaluated for this study. Its storage moduli after fully swelling are approximately 82 Pa. The microgel characterization, self-healing process, transportation behavior, and …

Go to article

Laboratory Investigation Of Regained Rock Permeability Using High Viscosity Friction Reducer In Comparison To Linear Guar Fracture Fluids, Ghith Biheri, Abdulmohsin Imqam Jan 2023

Laboratory Investigation Of Regained Rock Permeability Using High Viscosity Friction Reducer In Comparison To Linear Guar Fracture Fluids, Ghith Biheri, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Hydraulic fracturing is a method employed for extracting oil and gas from unconventional reservoirs by pumping a mixture of water, sand, and additives into the reservoirs to fracture oil formations. A high viscosity friction reducer (HVFR) based on polyacrylamide is a popular chemical that has been employed recently during hydraulic fracturing treatments to help transport proppant and to reduce friction. However, the use of HVFRs at high concentrations, especially in regions with high concentration levels of total dissolved solids (TDS), has raised concerns over the possibility of formation damage. In this research, a new type of HVFR was investigated for …

Go to article

The Influence Of Tropical Atlantic Sea-Surface Temperatures And The North Atlantic Subtropical High During The Maya Droughts, Derek K. Gibson, Jonathan Obrist-Farner, Brooke A. Birkett, Jason H. Curtis, Melissa A. Berke, Peter M.J. Douglas, Prudence M. Rice, Jeremy Maurer Jan 2023

The Influence Of Tropical Atlantic Sea-Surface Temperatures And The North Atlantic Subtropical High During The Maya Droughts, Derek K. Gibson, Jonathan Obrist-Farner, Brooke A. Birkett, Jason H. Curtis, Melissa A. Berke, Peter M.J. Douglas, Prudence M. Rice, Jeremy Maurer

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The frequency and duration of Late-Holocene hydrologic extremes in northern Guatemala were investigated using multiple sedimentological and geochemical proxies preserved in a sediment core collected from Lake Petén Itzá. A general trend of increasing aridity in the Maya Lowlands during the past 2000 years was punctuated by several multidecadal- to centennial-scale drought events recorded in the Petén Itzá sediments. In particular, the period spanning the Maya Terminal Classic Period and the Medieval Climate Anomaly (MCA), between 800 and 1300 CE, was marked by several extreme droughts and included the driest conditions of the past 2000 years between 950 and 1100 …

Go to article

Development Of Polymeric Sorbents As Reusable Filtration Systems For Remediation Of Pfas Contaminated Water, E. Molly Frazar Jan 2023

Development Of Polymeric Sorbents As Reusable Filtration Systems For Remediation Of Pfas Contaminated Water, E. Molly Frazar

Theses and Dissertations--Chemical and Materials Engineering

Decades of use of per- and polyfluoroalkyl substances (PFAS) in a multitude of consumer and industry-based products have led to a devastating amount of soil and water contamination. Although these chemicals and compounds possess advantageous qualities – such as that of PFAS in the role of fire-fighting foams that have no doubt saved countless lives and homes, we must take responsibility for the anthropogenic hazards that threaten our global health. This entails being able to cost-effectively remediate problems created in the past from overuse of toxic substances that could negatively impact our future, and in this case, the future of …

Go to article

Mechanical And Adhesive Properties Of Supramolecular, Mussel-Inspired Hydrogels, Daniel Darby Jan 2023

Mechanical And Adhesive Properties Of Supramolecular, Mussel-Inspired Hydrogels, Daniel Darby

Theses and Dissertations--Chemical and Materials Engineering

The exceptional mechanical and adhesive properties of mussel byssal threads come from supramolecular interactions of ligands found in the proteins comprising them. Ligands can form hydrophobic interactions, π-π stacking interactions, and hydrogen bonds, but the strongest supramolecular interaction they demonstrate is metal-ligand coordination. Specifically, Histidine (His-) and nitrodopamine (nDOPA) ligands coordinate to metals in a bidentate fashion and take on tris-, bis-, and mono- modalities (3, 2, or 1 ligand per ion, respectively). The distribution of these modalities is controlled by equilibrium thermodynamics. These same ligands can be used as crosslinks in supramolecular hydrogel networks. Supramolecular hydrogel networks are dissipative, …

Go to article

Molecular Understanding Of Zwitterions And Quantum Computing For Sustainability, Manh Tien Nguyen Jan 2023

Molecular Understanding Of Zwitterions And Quantum Computing For Sustainability, Manh Tien Nguyen

Theses and Dissertations--Chemical and Materials Engineering

The sustainable development of society needs sustainable energy solutions and the mitigation of greenhouse gas emissions. One key subject in this area is the development of safe and efficient ion-based batteries. Moreover, CO2 capture is a crucial pathway in mitigating emissions from the combustion of fossil fuels. Ongoing efforts are to improve both technologies' safety and efficiency. This thesis presents our efforts to conduct computational research on understanding advanced zwitterionic electrolytes and CO2 capture. Chapters 2-4 illustrate the computational research to understand ionic solvation in zwitterionic electrolytes. Solid-state electrolytes are essential for safer batteries. While solid polymer electrolytes …

Go to article

Developing And Modeling Tunable Nanofiltration And Functionalized Membranes For The Separation Of Organics And Inorganics From Water: Per- And Polyfluoroalkyl Substances, Lanthanides, And More, Francisco Cecil Leniz-Pizarro Jan 2023

Developing And Modeling Tunable Nanofiltration And Functionalized Membranes For The Separation Of Organics And Inorganics From Water: Per- And Polyfluoroalkyl Substances, Lanthanides, And More, Francisco Cecil Leniz-Pizarro

Theses and Dissertations--Chemical and Materials Engineering

In a world where clean water predictability is challenged by both global warming and the contamination of our natural resources, it is our responsibility to advance water separation technologies into more efficient processes and to lessen their environmental footprint. Pore and surface functionalization of membranes can enhance the separation of ions from water and even help overcome intrinsic challenges that some current separation technologies possess. If we begin with a complete fundamental understanding of the nanoscale interactions that occur in the process of separating ions from water, then we can engineer new functionalized composite membranes to provide alternative processes keeping …

Go to article

Leveraging Cell-Substrate Adhesion And Cell Migratory Properties In Skeletal Muscle Constructs And Cancer Metastasis Assays, Lauren E. Mehanna Jan 2023

Leveraging Cell-Substrate Adhesion And Cell Migratory Properties In Skeletal Muscle Constructs And Cancer Metastasis Assays, Lauren E. Mehanna

Theses and Dissertations--Chemical and Materials Engineering

Volumetric muscle loss (VML) remains one of the few skeletal muscle injuries without a reliable and repeatable treatment. In large volume muscle injuries, muscle fibers as well as the surrounding connective tissue are damaged, preventing therapeutic muscle stem cells, called myogenic progenitor cells (MPCs), from reaching the injury site and initiating repair. There is a clinical need to rapidly fabricate in vitro muscle tissue constructs that mimic the native tissue organization, with aligned myotubes, for insertion and integration at the patient’s injury site. In this dissertation, we utilize the MPC’s natural propensity to close gaps across an injury site to …

Go to article

Thermal Analysis Of Thermal Shield For Pip-Ii Ssr1 Cryomodule, Victor Aguado Rodriguez Jan 2023

Thermal Analysis Of Thermal Shield For Pip-Ii Ssr1 Cryomodule, Victor Aguado Rodriguez

Graduate Research Theses & Dissertations

Fermilab's PIP-II project plans to enhance the onsite accelerator into the world's most intense neutrino beam, bringing Fermilab into the next generation of particle accelerators. The five different types of cryomodules are vital parts of the PIP-II project and each requires numerous engineering analyses to prove operation. For example, the thermal shield of the Single Spoke Resonator-1 (SSR1) cryomodule required a thermal analysis to ensure the design was operating as intended before fabrication commenced. The thermal shield is cooled by the supercritical helium inside of the extrusion and must remain between 45 and 80 Kelvin. The main purpose of the …

Go to article

Insights To Surfactant Huff-Puff Design In Carbonate Reservoirs Based On Machine Learning Modeling, Ya Yao, Yue Qiu, Yue Cui, Mingzhen Wei, Baojun Bai Jan 2023

Insights To Surfactant Huff-Puff Design In Carbonate Reservoirs Based On Machine Learning Modeling, Ya Yao, Yue Qiu, Yue Cui, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surfactants could react with adsorbates on carbonate rock surface to alter wettability from oil-wetness to water-wetness, which is effective to enhance oil recovery. Surfactant huff-puff treatment is mostly applied for this purpose and the resulting surfactant performance is the outcome of complex interfacial processes. Currently, the effect of important parameters on surfactant performance is not completely reported and the contribution of each parameter to surfactant performance is hard to be quantified. Traditional methods to optimize surfactant performance are time-consuming and show strong dependency on extensive experiments. in this paper, we address these problems from machine learning (ML) perspectives. Several ML …

Go to article

Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn C. Morrison Jan 2023

Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn C. Morrison

Patents

Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO2.

Go to article

Conductive 3d Nano-Biohybrid Systems Based On Densified Carbon Nanotube Forests And Living Cells, Roya Bagheri, Alicia K. Ball, Masoud Kasraie, Aparna Chandra, Xinqian Chen, Ibrahim Miskioglu, Zhiying Shan, Parisa Pour Shahid Saeed Abadi Jan 2023

Conductive 3d Nano-Biohybrid Systems Based On Densified Carbon Nanotube Forests And Living Cells, Roya Bagheri, Alicia K. Ball, Masoud Kasraie, Aparna Chandra, Xinqian Chen, Ibrahim Miskioglu, Zhiying Shan, Parisa Pour Shahid Saeed Abadi

Michigan Tech Publications

Conductive biohybrid cell-material systems have applications in bioelectronics and biorobotics. To date, conductive scaffolds are limited to those with low electrical conductivity or 2D sheets. Here, 3D biohybrid conductive systems are developed using fibroblasts or cardiomyocytes integrated with carbon nanotube (CNT) forests that are densified due to interactions with a gelatin coating. CNT forest scaffolds with a height range of 120–240 µm and an average electrical conductivity of 0.6 S/cm are developed and shown to be cytocompatible as evidenced from greater than 89% viability measured by live-dead assay on both cells on day 1. The cells spread on top and …

Go to article

Bioinspired Redox Active Pyrogallol For Aqueous Ion Separations, Matt Libby Jan 2023

Bioinspired Redox Active Pyrogallol For Aqueous Ion Separations, Matt Libby

Honors Theses and Capstones

No abstract provided.

Go to article

Experimental Investigation Of The Interface And Wetting Characteristics Of Rock-H2-Brine Systems For H2 Geological Storage, Mirhasan Hosseini Jan 2023

Experimental Investigation Of The Interface And Wetting Characteristics Of Rock-H2-Brine Systems For H2 Geological Storage, Mirhasan Hosseini

Theses: Doctorates and Masters

The projected rise in demand for hydrogen (H2) production is a response to several factors, including greenhouse gas emissions caused by burning fossil fuels, depletion of fossil fuel reserves, and their uneven distribution around the earth. Thus, increased requirement for large-scale hydrogen storage solutions is anticipated to overcome imbalance between energy demand and supply. Deep underground formations such as salt caverns and porous reservoir rocks (e.g., depleted hydrocarbon reservoirs and deep saline aquifers) are necessary to achieve such volumes in practice. This process is known as underground hydrogen storage (UHS) which is technically very similar to underground natural gas storage. …

Go to article

Photocatalytic Reforming Of Lignocellulose: A Review, Xinyuan Xu, Lei Shi, Shu Zhang, Zhimin Ao, Jinqiang Zhang, Shaobin Wang, Hongqi Sun Jan 2023

Photocatalytic Reforming Of Lignocellulose: A Review, Xinyuan Xu, Lei Shi, Shu Zhang, Zhimin Ao, Jinqiang Zhang, Shaobin Wang, Hongqi Sun

Research outputs 2022 to 2026

Biomass has been considered as a promising energy resource to combat the exhaustion of fossil fuels, as it is renewable, sustainable, and clean. Photocatalytic reforming is a novel technology to utilize solar energy for upgrading biomass in relatively mild conditions. This process efficiently reforms and recasts biomass into hydrogen and/or valuable chemicals. To date, lignocellulose, including cellulose, hemicellulose and lignin, has attracted extensive studies in facile photocatalytic valorisation. This review summarizes and analyzes the most recent research advances on photoreforming of lignocellulose to provide insights for future research, with a particular emphasis on the reformation of lignin because of its …

Go to article

Artifacts In Localised Multivariate Uniform Conditioning: A Case Study, Oscar Rondon, Hassan Talebi Jan 2023

Artifacts In Localised Multivariate Uniform Conditioning: A Case Study, Oscar Rondon, Hassan Talebi

Research outputs 2022 to 2026

Localised Multivariate Uniform Conditioning (LMUC) is a technique designed for spatially locating Selective Mining Unit (SMU) grades derived using Multivariate Uniform Conditioning (MUC) for the assessment of recoverable resources. LMUC has the advantage of producing SMU estimates conforming to the MUC panel-specific grade-tonnage curves while preserving the spatial grade distribution at the selective mining level. However, LMUC results have two severe artifacts. This paper documents both artifacts using four grades from a large nickel–cobalt laterite deposit in Western Australia.

Go to article

The Effect Of Process Parameters On The Properties Of Elastic Melt Blown Nonwovens: Air Pressure And Dcd, Li Change, Yanfen Zhou, Stephen Jerrams, Jianwei Ma, Shaojuan Chen Jan 2023

The Effect Of Process Parameters On The Properties Of Elastic Melt Blown Nonwovens: Air Pressure And Dcd, Li Change, Yanfen Zhou, Stephen Jerrams, Jianwei Ma, Shaojuan Chen

Articles

An elastic masterbatch and elastic melt blown nonwovens are prepared based successively on styrene-ethylene/butylene-styrene (SEBS) and polypropylene (PP) blend. The phase separation morphology, rheological properties and crystal structure of the elastic masterbatch are investigated. The results show that a compatible and stable structure is obtained in molten SEBS and PP blend with excellent mobility in the temperature range of 210–230C. The crystallization of PP slows down resulting in a finer structure due to the restriction of the SEBS network structure with rarely change of crystalline structure. The relationship between process parameters and properties of the elastic nonwoven is also studied …

Go to article

Comprehensive Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For The Water Management Of Reservoir With Concentrated Divalent Ions, Tao Song, Mohamed Ahdaya, Zhanmiao Zhai, Thomas P. Schuman, Baojun Bai Jan 2023

Comprehensive Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For The Water Management Of Reservoir With Concentrated Divalent Ions, Tao Song, Mohamed Ahdaya, Zhanmiao Zhai, Thomas P. Schuman, Baojun Bai

Chemistry Faculty Research & Creative Works

As one of the most widely used technology to ameliorate the reservoir's heterogeneity, polymer gels have been applied for more than 60 years. However, how to plug fractured reservoirs with significant abnormal features, high temperature and high salinity, especially the divalent cations, is still a challenging target. This work systematically evaluated a novel salt-resistant re-crosslinkable preformed particle gel (SR-RPPG) designed for fractured reservoirs with excellent salt resistance (up to 5 % CaCl2). We evaluated the swelling kinetics, thermal stability and plugging efficiency of this SR-RPPG. We assessed the swelling kinetic and re-crosslinking behavior of the SR-RPPG through the …

Go to article

Re-Assembling Polymer Particle Package For Conformance Control And Fluid Loss Control, Jingyang Pu, Baojun Bai, Thomas P. Schuman Jan 2023

Re-Assembling Polymer Particle Package For Conformance Control And Fluid Loss Control, Jingyang Pu, Baojun Bai, Thomas P. Schuman

Patents

This invention is broadly concerned with compositions and processes for oilfield applications. More specifically, this invention relates to novel polymer constructed packages that, when pumped into a petroleum well, provide tunable characteristics of transformation and delayed self-assembly with each other under reservoir conditions to yield strong, elastic, bulk gel materials. The compositions comprise a polymer, assembling agents, and optional additives used for the re-assembly stage are uniformly-distributed within the initial gel particles. The polymer particle packages absorb water and swell upon exposure to water, thus exposing the "assembling agents" that enable re-assembly. Both swelling and re-assembly are proportionally controlled via …

Go to article

Enhanced Emulsion Liquid Membranes For Extraction Of Pollutants From Water, Muthanna Al-Dahhan, Qusay Al-Obaidi Jan 2023

Enhanced Emulsion Liquid Membranes For Extraction Of Pollutants From Water, Muthanna Al-Dahhan, Qusay Al-Obaidi

Patents

Described herein are novel emulsion liquid membranes useful for extracting pollutants from industrial wastewater and water. The emulsion liquid membranes include, in various phases, at least one of nanoparticles, an ionic liquid, and combinations of nanoparticles and ionic liquids. Use of the present emulsion liquid membranes enhances the separation and the stability of the ELM method for pollutant extraction and recovery from wastewater and water.

Go to article

3d Printed Zeolite Monoliths For Co2 Capture, Fateme Rezaei, Harshul V. Thakkar Jan 2023

3d Printed Zeolite Monoliths For Co2 Capture, Fateme Rezaei, Harshul V. Thakkar

Patents

Carbon dioxide (CO2 ) capture materials comprising one or more 3D-printed zeolite monoliths for the capture and or removal of CO2 from air or gases in enclosed compartments, including gases or mixtures of gases having less than about 5% CO2 . Methods for preparing 3D-printed zeolite monoliths useful as CO2 capture materials and filters, as well as methods of removing CO2 from a gas or mixture of gases in an enclosed compartment using 3D-printed zeolite monoliths are provided.

Go to article

3d Cfd Simulation Of A Bubble Column With Internals: Validation Of Interfacial Forces And Internal Effects For Local Gas Holdup Predictions, Hayder Al-Naseri, Joshua P. Schlegel, Muthanna H. Al-Dahhan Jan 2023

3d Cfd Simulation Of A Bubble Column With Internals: Validation Of Interfacial Forces And Internal Effects For Local Gas Holdup Predictions, Hayder Al-Naseri, Joshua P. Schlegel, Muthanna H. Al-Dahhan

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

CFD Models (Turbulent Models and Interfacial Forces) Incorporated with the Population Balance Model (PBM) Have Been Validated, Azimuthally, with the Gamma-Ray-Computed Tomography (CT) Results to Address the Effect of the Presence of Internals with Different Arrangements and Diameters. the Superficial Gas Velocity Applied Was Varied from 0.05 to 0.45 M/s. the Results Exhibit the Capability to Predict the Hydrodynamics of the Bubble Column, Further Incorporating the Population Balance Model and Promoting the Prediction of Simulation in High Superficial Gas Velocity. the Effect of Internals Revealed that the Gas Holdup Was Significantly Enhanced in the Bubble Column's Wall Region, While the …

Go to article

Investigations Of A Surrogate Fuel Based On Fischer-Tropsch Gtl And Ctl In Cvcc, Idi And Di Compression Ignition Engines, Amanda C. Weaver Jan 2023

Investigations Of A Surrogate Fuel Based On Fischer-Tropsch Gtl And Ctl In Cvcc, Idi And Di Compression Ignition Engines, Amanda C. Weaver

College of Graduate Studies: Theses & Dissertations

With the increase in availability, feedstocks, and properties of alternative fuels, compatibility issues emerge between current engine platforms often requiring a limit on the blend percentage of alternative fuel in conventional fuel or alteration to the engine platform. Two key metrics were identified, autoignition quality and lubrication characteristics, as vital for the proper function of a compression ignition engine, and if the blend of alternative fuels matches these two criteria for the diesel standard, then the resulting blend percentage can be considered as a viable alternative for complete replacement of conventional petroleum ULSD. Autoignition quality was matched using blends S-8, …

Go to article

Investigation Of Additives And Ingredients Of Bio-Resin For Visible Wavelength Laser-Induced Polymerization, Patrick Riggs Jan 2023

Investigation Of Additives And Ingredients Of Bio-Resin For Visible Wavelength Laser-Induced Polymerization, Patrick Riggs

College of Graduate Studies: Theses & Dissertations

Optical 3D printing is a branch of Additive manufacturing (AM) that utilizes low-waste production leading to efficient and rapid prototyping. Currently, this method of AM is associated with mainly petroleum-based resins. Bio-resin polymerization is an emerging research area for finding replacements for petroleum-based resins, but curing the resin with laser energy is not normally a practical use case. Current optical 3D printing uses lasers to cure liquid resins to form solid 3D objects in a layer-by-layer process which is time consuming, defect prone, and a leading limiting factor for high volume production; so, finding a way to incorporate bio-resin into …

Go to article

An Artificial Neural Network Approach To Predicting Formation Stress In Multi-Stage Fractured Marcellus Shale Horizontal Wells Based On Drilling Operations Data, Moudhi Alawadh Jan 2023

An Artificial Neural Network Approach To Predicting Formation Stress In Multi-Stage Fractured Marcellus Shale Horizontal Wells Based On Drilling Operations Data, Moudhi Alawadh

Graduate Theses, Dissertations, and Problem Reports (ETD)

The distribution of the anisotropic minimum horizontal stress, both in horizontal and vertical directions, is necessary for effective hydraulic fracture treatment design in Marcellus Shale horizontal wells. Typically, the minimum horizontal stress can be estimated sonic logs. However, sonic log data is not commonly available for the horizontal Marcellus shale wells due to the complexity and cost. The objective of this research is to predict the anisotropic minimum horizontal stress by utilizing drilling parameters including depth, weight-on-bit (WOB), revolution per minute (RPM), standpipe pressure, torque, pump flow rate, and the rate of penetration (ROP). More specifically, artificial neural network (ANN) …

Go to article

First Prev Next Last