Chemical Engineering Commons^™

The Design Estimate Of A Warehouse Refrigeration System, Jackson Dear

Honors Theses

The intention of this project was to provide a design and cost estimate for the refrigeration systems within an industrial cold storage distribution center for Magnolia Country Frozen Foods, Inc. in East Rutherford, NJ. The facility includes eighteen 300,000 ft3 units (200 ft x 100 ft x 15 ft). These units require 200 tons of refrigeration at a maintained temperature of 0oF. This project's scope included choosing an optimal refrigeration system, selecting a refrigerant for use within the system, and providing a cost estimate for the purchase of the refrigeration system equipment and for the yearly cost associated with running …

Microwave Regeneration And Thermal And Oxidative Stability Of Imidazolium Cyanopyrrolide Ionic Liquid For Direct Air Capture Of Carbon Dioxide, Yun-Yang Lee, Eda Cagli, Aidan Klemm, Ruth Dikki

Faculty Scholarship

Understanding the oxidative and thermal degradation of CO2 sorbents is essential for assessing long-term sorbent stability in direct air capture (DAC). The potential degradation pathway of imidazolium cyanopyrrolide, an ionic liquid (IL) functionalized for superior CO2 capacity and selectivity, is evaluated under accelerated degradation conditions to elucidate the secondary reactions that can occur during repetitive absorption-desorption thermal-swing cycles. The combined analysis from various spectroscopic, chromatographic, and thermal gravimetric measurements indicated that radical and SN2 mechanisms in degradation are encouraged by the nucleophilicity of the anion. Thickening of the liquid and gas evolution are accompanied by 50 % reduction in CO2 …

Exploring Methods For Recycling Filament Waste In 3d Printing, Max Rios Carballo

Publications and Research

The goal of the current study is to investigate cutting-edge techniques for recycling filament waste from 3D printing procedures. Appropriate waste management techniques are required to reduce this trash's harmful environmental consequences. The goal of the project is to look at new methods for recycling filament waste in order to minimize disposal and encourage reuse. To acquire data from pertinent papers and research, a thorough literature review methodology was used. The findings show that this issue may be resolved utilizing a variety of recycling techniques, including shredding, melting, and re-extrusion. The type of filament waste and the intended goal will …

Enhancing Compatibility And Mechanical Properties Of Natural Rubber Composites, Krisma Yessi Sianturi, Adam Febriyanto Nugraha, Belle Kristaura, Mochamad Chalid

Journal of Materials Exploration and Findings

Pure natural rubber (NR) exhibits low mechanical properties, necessitating the incorporation of additives like vulcanizing agents and fillers. Carbon black and silica, conventional fillers, are relatively expensive and not environmentally friendly. This study explores using Oil Palm Empty Fruit Bunch (OPEFB) fiber as an affordable, abundant, and biodegradable alternative filler for NR. However, compatibility issues arise between the nonpolar NR and the polar OPEFB fiber. A latex-starch hybrid coupling agent (CA (NR-St)) was added to the composite formulation to address this. NR, OPEFB fiber, and the coupling agent were mixed using an open roll mill with a 10 phr OPEFB …

Characterizing The Influence Of The Moc Support For The Pt Single Atom Catalyst For The Water Gas Shift Reaction, Kathryn Mcgee

Honors College Theses

In this report, we looked at characterizing the effect of the support (MoC) for the water gas shift (WGS) environment. The single-atom catalyst analyzed was platinum supported in molybdenum carbide. The primary focus of this report was CO* because of the strong interest in using the WGS reaction to convert CO* contamination. All calculations were performed using the density functional theory (DFT) method. We analyzed the binding energies for the different adsorbates, with a special emphasis on CO and charges of the support. We compared our results to Pt/Al₂O₃ support. We observed that the support, specifically MoC …

Autonomous Raman Hyperspectral Imaging And Analysis; Advances Towards Mapping Crystalline Character In Biologically Important Polymers, Sadeq H. Alkhalifa

ETD Archive

Poly-l-lactic acid has been of a great interest to the medical profession in recent years because of its biodegradability and biocompatibility. The biodegradation rate can be controlled by its crystallinity content. One method to modify its crystallinity content is by cold drawing. Raman spectroscopy is utilized to distinguish between the different crystalline content on the sample. However, a chemical imaging method is needed to characterize the polymer on the macro level. Chemical imaging using Raman spectroscopy is an important method of characterization that is non-invasive and non-destructive. The emphasis of my research has been to develop a method to characterize …

Elucidating The Mechanical And Transport Properties Of Lignin-Based Hydrogel Composites, Nicholas Gregorich

All Dissertations

The use of lignin in the fabrication of soft composites has become an emerging area of research in polymer science and polymer chemistry. These lignin-based materials present numerous benefits, notably, a reduction in the use of petroleum-based precursor, improved structural benefits to otherwise soft host polymers, as well as the inherent antimicrobial and antioxidant properties of lignin, making it suitable for biomaterials. Herein, we present two chemical reaction pathways of incorporating lignin that was fractionated and cleaned using the Aqueous Lignin Purification with Hot Agents (ALPHA) process into poly(vinyl alcohol) (PVA) hydrogel composites for aqueous-based separations. By leveraging the ALPHA …

Bridging The Gap Between Phase Behavior And Processing For Renewable And Refinable Carbonaceous Precursors, Graham Tindall

All Dissertations

As a category of materials, engineered carbons, specifically carbon fibers, are first-in-class for properties such as modulus, specific strength, and thermal resilience; however, the inability to directly process atomic carbon necessitates the development and optimization of carbonaceous precursors. Because the structure and properties of carbon are highly dependent on the precursors and requisite processing, numerous materials have been investigated as feedstocks for large-scale production. Although cellulose and rayon were among the first investigated, polyacrylonitrile (PAN) is the current hegemon of carbon fiber precursors. PAN feeds 90% of this market, but it is neither inexpensive nor renewable. Because a significant fraction …

A Comparison Of Optical Measurement Methods For The Growth Of S. Cerevisiae, Jackson Black

Chemical Engineering Undergraduate Honors Theses

Genetic engineering of living organisms provides the opportunity to express and harvest different proteins from cell surfaces. Yeast (S. cerevisiae) is one such organism and is capable of being grown on an industrial scale. Cellular concentration is an important parameter to monitor while fermentation processes are underway, in order to control the environment inside the growth medium and maximize yields. Spectrophotometry is a conventional method for measuring concentration, but is limited by a narrow absorbance range, and the need for on-site periodic sampling. A continuous method of measurement, as provided by Bug Labs BE2100 non-invasive biomass monitor, would …

Battery Design, Construction, And Characterization For Small Motor Use Focusing On Anodic Zinc For Electron Flow, Amber Veach

Chemical Engineering Undergraduate Honors Theses

This thesis explores the construction, characterization, and application of anodic zinc batteries for powering a small electric motor for the ChemE Car competition. Two zinc galvanic cell batteries were studied: zinc-carbon and zinc-air batteries. Prototype batteries were constructed and tested for voltage, amperage, and power production. In the zinc-carbon trials, a 3:1 mixture of manganese dioxide and graphite was determined to be the best cathode for power production. The size which allowed for sufficient power while maintaining the smallest footprint on the car was a zinc can six cm tall and two cm in diameter. Analysis of paper zinc-air battery …

Interactions And Phenomena Between Disodium Cromoglycate And Polyelectrolytes, Brandon Tipton

Chemical Engineering Undergraduate Honors Theses

The interactions between polyelectrolytes and oppositely charged macroions have been widely studied, but few reports have been made on the interaction between chromonic mesogens and polyelectrolytes. Here, we report on the formation of liquid crystalline coacervates achieved by the liquid-liquid phase separation of an aqueous solution of negatively charged liquid crystal and polycations. As well as the occurrence of tactoids that form in the absence of these interactions. The liquid crystal that is experimented with is disodium cromoglycate, better known as DSCG. This acts as a negative charge that is paired with a variety of positively charged polyelectrolytes. The first …

Probing The Structure Of Water On Surfaces: From Water Absorption To Ice Nucleation, Jiarun Zhou

All Dissertations

Water, essential for all life forms, is the most abundant, simple, yet mysterious molecule in the world. This molecule, consisting of only three atoms, behaves in unexpectedly different ways with the change of environment. In the past, studies of water under different conditions (temperature, pressure, on the surfaces, with confinement) have been conducted using experimental and computational methods. However, the influence of a given environment on water properties is yet to be fully understood. This dissertation studies water at complex interfaces (surfaces with various chemistry and physics properties) in both the liquid and crystalline states. Various heterogeneous systems used to …

Repeated Low-Level Blast Exposure Alters Urinary And Serum Metabolites, Austin Sigler, Jiandong Wu, Annalise Pfaff, Olajide Adetunji, Paul Ki-Souk Nam, Donald James, Casey Burton, Honglan Shi

Chemistry Faculty Research & Creative Works

Repeated exposure to low-level blast overpressures can produce biological changes and clinical sequelae that resemble mild traumatic brain injury (TBI). While recent efforts have revealed several protein biomarkers for axonal injury during repetitive blast exposure, this study aims to explore potential small molecule biomarkers of brain injury during repeated blast exposure. This study evaluated a panel of ten small molecule metabolites involved in neurotransmission, oxidative stress, and energy metabolism in the urine and serum of military personnel (n = 27) conducting breacher training with repeated exposure to low-level blasts. The metabolites were analyzed using HPLC—tandem mass spectrometry, and the Wilcoxon …

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas Schuman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. in this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. a dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

Transport Phenomena With Reactions In Drug Delivery: Towards A Quantitative Description, Xianjie Qiu, Parthasakha Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

A Distributed System Called a Krogh Cylinder is Used Here to Quantify the Transport of a Solute from the Capillary into the Extravascular Tissue. the Capillary Network is Broken Down into Cylindrical Cells, Each Containing a Capillary and an Appropriate Amount of Extravascular Tissue. the Flow in the Cylinder Model Has Two-Dimensional Velocities, Which Are in the Axial and Radial Directions. All Parameters of the System, together with the Geometric Ones, Have Been Included in the Model. for a Given Bioavailability, the Uptakes of Reactive and Nonreactive Solutes Have Been Obtained. Very Large or Massive Molecules Have Been Considered. the …

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. In this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. A dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

A Molecular Dynamics Study Of Structural Modifications Of Perarylphosphonium Based Ionic Liquids On The Melting Point, Johnathan Anderson

Graduate Theses and Dissertations (2019 - present)

Several perarylphosphonium based mesothermal ionic liquids (ILs) have been shown to be stable at high temperatures for prolonged periods of time and with high heat capacities making them good candidates for use in many processes such as usage as a heat transfer fluid, as an absorbent for separation of aromatics from aliphatics, and as a solvent for high temperature reactions. Many, however, have melting points above 100^o C, limiting their use. Recently, it was shown that the melting point of an IL can be lowered by simply increasing the dipole moment of the cation or by structurally rigidifying the …

Measuring Plume Concentration Variations Under Neutral Atmospheric Conditions, Daniel Williams

Chemical Engineering Undergraduate Honors Theses

Hazardous gases are increasingly becoming a large safety concern as the world continues to grow and industrialize. The modeling of when hazardous gases breach containment is an extremely important objective of consequence assessment planning and response. To improve the understanding of the variability inherent in passive gas releases, a test program to demonstrate the variability of gas concentration measurements at different location in a passive gas plume released from an area source in the ultra-low speed wind tunnel at the Chemical Hazards Research Center. A Flame Ionization Detector was used to measure the concentration of the source cloud. Methane was …

Lignin Copolymer Property Prediction Using Machine Learning, Collin Larsen

Chemical Engineering Undergraduate Honors Theses

Lignin, an abundant biopolymer, is a waste byproduct of the paper and pulp industry. Despite its renewable nature and potential applicability in various products, such as plastics and composites, the development of lignin-based materials has been impeded by the cumbersome, Edisonian process of trial and error. This research proposes a novel approach to forecasting the properties of lignin-based copolymers by utilizing a recurrent neural network (RNN) based on the Keras models previously created by Tao et al. Example units of modified lignin were synthesized via esterification and amination functional group modifications. To increase the efficiency and accuracy of the prediction …

Estimating Toxic Load From Finite-Duration Contaminant Releases In Wind Tunnel Experiments, Patrick B. Jones

Chemical Engineering Undergraduate Honors Theses

When gaseous contaminants are released into the atmosphere said contaminants form clouds that travel in the prevailing wind direction. An individual caught in the downwind path of one such cloud will accumulate a dosage, or toxic load, of said contaminant that is dependent on a multitude of environmental factors. This thesis quantifies unpredictability – or variation – in toxic load measurements using downwind concentration data captured from finite-duration gaseous contaminant releases conducted at set conditions in the Chemical Hazards Research Center ultra-low speed wind tunnel.

Finite-duration releases can be divided into two categories – time-limited steady releases and puffs – …

Greenhouse Gas Emissions From Milk Production In The Us, Cailey Cooper

Chemical Engineering Undergraduate Honors Theses

Life cycle assessment is performed to determine the environmental impacts of the life cycle of a product. In this study, the greenhouse gas emissions from milk production in the United States were calculated using a cradle-to-gate analysis. The dairy industry has a noticeable impact on the total greenhouse gas emissions in the US. Performing life cycle assessment provides information about the main emission sources in the life cycle which can spark innovative changes to reduce these emissions. The life cycle assessment was performed using the openLCA software and ReCiPe impact assessment methodology. The results indicated that 1.28 kg of carbon …

Heat Transfer From Plates, Leanza Trevino

Chemical Engineering Undergraduate Honors Theses

The purpose of this honors thesis is to create an experiment for the CHEG Lab I course. This is a continuation of work done by Alexa Moreno. She created an experiment to model free convection of a horizontal plate. In this report, free and forced convection of a vertical and horizontal plate, respectively are modeled. This report explains the motivation for creating this heat convection experiment, the results of performing the experiment, and provides recommendations for future work on this experiment. Lab handouts are included in the Appendix.

Characterizing And Quantifying Shear-Induced Hemolysis In A Hollow Fiber Membrane System, Siddhi Bhat

Chemical Engineering Undergraduate Honors Theses

Clinical studies have shown that patients undergoing renal replacement therapy are more susceptible to developing hemolysis, or the rupturing of red blood cells. Rapid hemolysis can cause symptoms such as anorexia, vomiting, and even death in severe cases. The aim of this study is to identify how shear stress within a hollow fiber membrane impacts the level of hemolysis that occurs. This allows for the optimization of the ultrafiltration membranes that are typically used for hemofiltration treatments. The variables being studied are the radii of hollow fibers, number of fibers, and volumetric flow rate of blood being circulated. Here, we …

Utilization Of Electrodeionization To Separate And Concentrate Cellobionic And Gluconic Acid, Andie Veeder

Chemical Engineering Undergraduate Honors Theses

Biofuel production is currently an expensive and inefficient process with many drawbacks. It is water and land intensive, competes with food production, and requires large energy inputs decreasing its relative sustainability. This paper explores the use of electrodeionization (EDI) to improve the biofuel process by separating and concentrating large, organic sugar acids that are important materials for the production of bioethanol. An EDI device was assembled for the purpose of separating and concentrating gluconic, cellobionic and lactobionic acid. Several trials were conducted and samples were analyzed to determine the success of this experiment. The results for the separation and concentration …

Comparing Firocoxib And Meloxicam In The Application Of Microneedle Patch For Transdermal Drug Delivery, Ruohan Li

Chemical Engineering Undergraduate Honors Theses

This thesis compares the performance of meloxicam and firocoxib in the aspects of its physical characteristic, chemical compositions, and in-vitro performances for transdermal pain management microneedle patches on farm animals. The microneedle patches are composed of polyvinyl alcohol (PVA), type I collagen (COL), and chitosan (CHI) as base material that carries NSAIDs to achieve therapeutic purposes. Scanning electron microscopy (SEM) was utilized to observe the morphological and physical characteristics of the microneedle patches. Both meloxicam and firocoxib microneedle patches were successfully prepared using the methodology, with organized microneedle distribution and sizing. And Fourier transform infrared spectroscopy (FTIR) confirmed the chemical …

A Teaching Unit Plan For Introducing Engineering In 1st-2nd Grade Classrooms, Claudia Smith

Chemical Engineering Undergraduate Honors Theses

The field of engineering, and specifically chemical engineering, is projected to increase significantly over the next 10 years. Engineering programs require students to have a strong foundation of math and science. Students in the United States are often underprepared to enter these programs, and the majority of high school students are not interested in pursuing a career in the STEM field at all. For this project, a unit teaching plan was created to introduce students to the field of engineering, providing a foundation for their upper-level STEM classes, and encouraging them to consider engineering as a career in the future. …

Response Of Cell Nuclei To Mechanical Strain In Synthetic Liquid Crystals, Sydnee Ehorn

Chemical Engineering Undergraduate Honors Theses

In this research project, induced mechanical stress on the cell nucleus via synthetic liquid crystals (LCs) was explored. Points of interest were the shape alterations and distortions of the nuclear envelope under strain, providing insight into the mechanics and stiffness of the cell nuclei. LCs are substances with structure and fluidity, and LCs in the nematic phase are aligned in a single direction without layers, inducing shear stress on inclusions. This study confirmed that an aqueous solution of 17.3 wt% disodium cromoglycate (DSCG) can successfully strain the nuclei of chicken red blood cells (RBCs) by examining the nuclear response to …

Separation Of Organic Acids Through Direct Catalysis From Sugars, Katelyn Robinson

Chemical Engineering Undergraduate Honors Theses

Society relies on plastic products, whether they are single use or durable. A downside of plastic is that the most common type is a product of oil and oil is not only a limited resource but also a climate-damaging resource. Polylactic acid (PLA) is a bio-based, biodegradable plastic. However, the process of converting biomass to polylactic acid polymer has the largest environmental impact of the PLA production process, so alternative methods of conversion are needed (Moretti et al., 2021). The polylactic acid polymer can be made with lactic acid, which can be converted from glucose.

Tangential Flow Treatment Of Poultry Processing Wastewater Using Stainless Steel Ultrafiltration Membrane, Saubana Olorunsola Dada

Graduate Theses and Dissertations

The current treatment of poultry processing wastewater (PPW) requires a large expanse of land, takes time, and requires chemical usage. The wastewater is typically treated prior to discharge. Apart from aiming to reuse the treated water for non-potable activities, this project aimed to reduce the footprint and time required for PPW treatment. To intensify the PPW treatment units, we studied the possibility of replacing dissolved air floatation (DAF) with a stainless steel ultrafiltration membrane (SSUF). Combined PPW from all processing units taken before the first DAF and the second DAF were used for this study with no pretreatment. The SSUF …

Characterization Of Lignin And Cellulose Biopolymers Structure – Function Relationships, Zachariah Pittman

All Dissertations

Biomass is vital to ongoing efforts to secure a sustainable future. While many of our efforts focus on finding alternative forms of energy, biomass among them, only biomass has the potential to serve as a sustainable materials feedstock. However, biomass is heterogenous, complicating the upgrading processes needed to manufacture commodity and performance products. For example, plant biomass consists largely of cellulose, a crystalline polysaccharide, and lignin, a highly stable polyaromatic. The specific properties of cellulose and lignin depend greatly on the plant, harvesting conditions, and isolation procedures. Thus, accurate and reliable determination of the fundamental properties of biomass is crucial …