Aerodynamics and Fluid Mechanics Commons^™

Cfd Modeling Of Vertical Axis Wind Turbine Arrays Using Actuator Cylinder Theory, Cory Schovanec

McKelvey School of Engineering Graduate Student Theses & Dissertations

The goal of this thesis is to analyze the flow field and power generation from a vertical axis wind turbine (VAWT) by extending the Actuator Cylinder Model to include the viscous effects. Turbulent flow effects in the Actuator Cylinder Model are modeled by solving the Reynolds-Averaged Navier-Stokes (RANS) equations with the Spalart-Allmaras (SA) turbulence model in ANSYS FLUENT. A study is performed to establish mesh independence of the solutions. Numerical solutions on a fine mesh are compared to existing theoretical results based on inviscid theory for a series of flow conditions and turbine sizes. Similar trends in the present turbulent …

Numerical And Experimental Analysis Of Air-Cooled Condensers, Kaipo Kekaula

UNLV Theses, Dissertations, Professional Papers, and Capstones

The scope of this project is to numerically and experimentally dry cooling process in air-cooled condensers (ACCs) designed for concentrated solar power (CSP) applications. This effort is driven by the growing economic and political pressure to reduce water consumption during power generation due to limited water resources in the arid geographic climate of the southwestern United States. A computational approach is used in conjunction with experimental validation to gain a more complete understanding of these systems.

Traditionally research into ACCs have been largely limited to air-side heat transfer modelling as it accounts for a large portion of the total thermal …

A Numerical Investigation Of Microgravity Evaporation, Daniel Peter Ringle

Dissertations and Theses

Evaporation is important to myriad engineering processes such as cooling, distillation, thin film deposition, and others. In fact, NASA has renewed interest in using cabin air pressure evaporation as a means to recycle waste water in space. As one example, NASA recently conducted experiments aboard the International Space Station (ISS) to measure evaporation rates in microgravity and to determine the impacts of porous structure on the process. It has long been assumed that differences in evaporation rates between 1-g₀ and microgravity are small. However, discrepancies by as much as 40% have been observed in practice. The assumption now …

Supercritical Carbon Dioxide Based Heat Exchanger On The Martian, Sarah Guinn

Discovery Day - Prescott

The use of supercritical carbon dioxide (sCO2) in power cycles has been fairly new in the last decade. Due to this, there is a lack in research for both terrestrial and extraterrestrial applications. The purpose of this project is to utilize sCO2 as a working fluid and design and optimize a Brayton Cycle based heat exchanger on the Martian surface. Due to the lack of water on Mars, this research will provide a stronger analysis of planetary based drycooling processes in low atmospheric pressure and colder temperatures. We have been conducting an in-depth analysis of the heat exchanger by modeling …

Quantifying Wicking In Functionlized Surfaces, Maureen Winter, Ryan Regan, Alfred Tsubaki, Craig Zuhlke, Dennis Alexander, George Gogos

UCARE: Research Products

Wicking remains the enigmatic key factor in many research areas. From boiling in power plants, to anti-icing on plane wings, to medical instruments, to heat pipes, efficiency and safety depend on how quickly a surface becomes wet. Yet wicking remains difficult to quantify and define as a property of the surface. This experiment strives to measure the wicking property by examining the rate that a liquid can be pulled out of a container. A superhydrophilic surface is placed in contact with the liquid at the bottom of a tube so that the volume flow rate across the surface can be …

Aerodynamics Of Wind Loading On Buildings, Kayla Burch

Honors Theses

A three-dimensional model of a one-story residential home, with an emphasis on the roof style and structure, was modeled using CATIA and then built and tested in the wind tunnel at Western Michigan University. The wind tunnel allowed an airflow over different style roofs to be tested at 100 mile per hour winds, strengths typical for hurricanes and other natural phenomena. The measured results show the lift and drag, along with the pressure gradient and the skin friction over the roofs. The effect of these aerodynamic characteristics of the building due to adding solar panel prototypes were also evaluated. The …

Arizona Hyperloop: The Fifth Mode Of Transportation, Eleanor Pahl, Matthieu Rada

Discovery Day - Prescott

Arizona Hyperloop is a coalition between Embry-Riddle Aeronautical University and Arizona State University students competing in Elon Musk’s annual SpaceX Hyperloop Pod Competition. Hyperloop is the proposed “Fifth Mode of Transportation” - coined “a cross between a Concorde, a rail gun, and an air hockey table.” A hyperloop pod levitates and travels at nearly the speed of sound inside a vacuum tube, which eliminates air resistance. Musk hosts the annual competition to university students to encourage the evolution of urban transportation. The goal is to design, build, and race the fastest prototype pod at SpaceX’s mile-long test track in Hawthorne, …

Aircraft Leading Edge Strakes On Conventional Naca Wings, Anthony Pirone

Discovery Day - Prescott

The prevention of stall on aircraft wings has been a great challenge over the history of airplanes. As the aircraft become more and more complex, it becomes harder to fit high lift devices and leading-edge devices onto high camber, supercritical airfoil aircraft wings. In the fighter jet class of aircraft the obstacle of stall is usually delayed by the implementation of leading-edge root extensions or strakes. Strakes create a tip vortice along the sharp leading edge that transitions over the surface of the wing preventing separation on both the upper and lower surface of the wing allowing the fighter jet …

Sae Aero West Heavy Lift Competition Team - Eaglenautics, Anthony Pirone, Evan Stuart, Jessica Millard, Nathaniel Scott

Discovery Day - Prescott

ERAU’s SAE Aero Design West Competition team encourages students of all majors who have an interest in the design of heavy-lift cargo and passenger aircraft to design, build, and fly a large RC aircraft to meet a new set of regulations each competition year. Since the team, Eaglenautics, was founded in 2017 it has successfully been to competition once in April 2019 in California. The team’s aircraft flew 4 out of 5 flight rounds, passed all technical inspections, and is now on display in ERAU’s Aero-Fab in the AXFAB. The 2020 competition requirements are unique in that the cargo’s weight-to-volume …

Interaction Of High Aspect-Ratio Micro-Pillars With Wall Turbulence, Pratik Suhas Deshpande

Doctoral Dissertations and Master's Theses

An experimental study of the interaction between hairy structures modeled as high-aspect ratio micro-pillars (HAMuP) and wall turbulence is presented. Micro-pillars are elastic, hair-like microstructures which have been inspired by naturally occurring examples like lateral line sensors in fish and air flow sensors in bats. The objective of this thesis was two fold: to develop a manufacturing process for consistent production of HAMuP arrays, and to conduct a study focusing on the interaction of HAMuP arrays with wall turbulence. Hotwire anemometry measurements were carried out in two different experimental facilities at three different streamwise locations to describe the interaction between …

Numerical Investigation Of Leading-Edge Modifications Of A Naca Airfoil, Anisur Rahman Ikram

Masters Theses

A parametric investigation was carried out to understand the flow characteristics of tubercle airfoils and to determine the best approach and parameters for designing a tubercle airfoil. For this purpose, a straight edge base airfoil (NACA 4414) and several tubercle airfoils, by modifying the leading edge of the base airfoil, were created in SolidWorks and tested with Computational Fluid Dynamics (CFD) application software Star CCM+.

Alternative tubercle airfoil with elliptical bumps demonstrated superior post-stall performance when compared to their straight edge counterparts; their post-stall lift did not decrease drastically. However, their pre-stall lift coefficients were always lower than the base …

Hybrid Non-Destructive Assessment For Flow Induced Vibration Piping Systems Using Coupled Fluid-Structure Interaction, Keen Kuan Kong

Student Works (2020-2029)

Pipelines and piping systems are of great importance in many industries such as water supply, petroleum and petrochemicals and nuclear power generation. They provide transport for high-velocity pressurized fluids operating under time-varying conditions. They are required to operate non-stop for a schedule of 24 hours a day, 7 days a week. Piping vibration failures have been one of the major causes of downtime, fires and explosions in industrial plant over the past 30 years. Failure of piping systems can have disastrous effects, leading to injuries and fatalities as well as to substantial cost to industry and the environment. Flow-induced vibration …

Avia 201 Project 1 Windtunnel Lab Form Ver 1.20 20200323, Nihad E. Daidzic

Aviation Department Publications

To introduce aviation/aeronautics/aerospace students to wind tunnel(s) and methods used in experimental identification of various aerodynamic (and stability) coefficients of airfoils (2D), wings (3D) and scale models.

2020 Oklahoma Research Day Full Program, Southwestern Oklahoma State University

Oklahoma Research Day Abstracts

No abstract provided.

The Effect Of Passive And Active Boundary-Layer Fences On Delta Wing Performance At Low Reynolds Number, Anna C. Demoret

Theses and Dissertations

The effect of passive and active boundary-layer fences (BLFs) on performance is evaluated on a NACA 0012 delta wing (c_root = 14in, c_tip = 2.8in, Λ = 45°, b = 23.5in) at a Reynolds number (Re) of 5.0 x 10⁵ based on the root chord. The performance improvements of a passive BLF are replicated and improved upon using an active flow control (AFC) fluidic fence created by a wall-normal steady-blowing jet from a slot. The application of a passive BLF at a spanwise location of 70% z/b resulted in an 8.7% increase in C_Lmax compared to …

Lip Thrust Apparatus, Ian M. Wilson, Alvin K. Cheong

Mechanical Engineering

This document contains the background information, defined scope of work, preliminary design philosophy, conceptual design development, and final design choices along with its corresponding manufacturing and design verification plans. It also includes the preliminary testing and prototyping necessary in bringing our verification prototype to its final configuration for delivery. Finally, it includes the entire manufacturing process followed in creating the final project and the extensive testing performed to ensure it meets the defined engineering specifications. The aerodynamic phenomenon being analyzed and demonstrated in our final deliverable can be seen in a scenario where when a propeller is enclosed in a …

Characterization Of Inertial Particles In The Turbulent Wake Of A Porous Disk, Kristin Nichole Travis

Dissertations and Theses

This study presents the findings of a wind tunnel experiment investigating the behaviour of micrometric inertial particles in the turbulent wake of a stationary porous disk. Various concentrations [Φ_v ∈ (2.95 x 10^-6 - 1.22 x 10^-5)] of polydisperse water droplets (diameter 13-41 µm) are compared to sub-inertial tracer particles. Hot-wire anemometry, phase Doppler interferometry and particle image velocimetry were implemented in the near and far wake regions to study the complex dynamics of the particles. Turbulence statistics and particle size distributions are presented and used to explore the particle wake interaction.

High Order Explicit Semi-Lagrangian Method For The Solution Of Lagrangian Transport And Stochastic Differential Equations, Hareshram Natarajan

CGU Theses & Dissertations

A semi-Lagrangian method is developed for the solution of Lagrangian transport equations and stochastic differential equations that is consistent with Discontinuous Spectral Element Method (DSEM) approximations of Eulerian conservation laws. The method extends the favorable properties of DSEM that include its high-order accuracy, its local and boundary fitted properties and its high performance on parallel platforms for the concurrent semi-Lagrangian and Eulerian solution of a class of time-dependent problems that can be described by coupled Eulerian-Lagrangian formulations. Such formulations include the probabilistic models used for the simulation of chemically reacting turbulent flows or particle-laden flows. Motivated by the high-fidelity simulation …

Design Of Banner Tow Mechanism For Bush Plane, Kyle Ciarrone, Ivan Martin, Rishabh Gadi, Tyler Brandt

Williams Honors College, Honors Research Projects

The 2019-2020 AIAA DBF objective was to design, build, and test a banner-towing bush plane that carries wooden passengers and luggage. Senior members on the team undertook the creation of the banner tow mechanism subsystem as their senior design project on behalf of the design team due to the challenge of its mechanical design and the aerodynamic considerations regarding its placement and enclosure aboard the aircraft. The competition as well as access to campus resources were canceled due to COVID-19, so full testing and integration of the mechanism was not achieved. However, the engineering design process was experienced from the …

A Study Into Validating A Coupled Method Of Characteristics And Direct Simulation Monte Carlo Method Against Empirical Data, Andrew Brown

Electronic Theses and Dissertations, 2020-2023

The following will outline the methodology and results of validating a coupled Method of Characteristics (MOC) and Direct Simulation Monte Carlo (DSMC) method. This research focused specifically on modeling plume impingement, induced by Reaction Control System (RCS) thrusters that flew on the National Aeronautics and Space Administration's (NASA's) space shuttle Discovery. For each simulation, the continuum portion of the RCS thruster was simulated using MOC for solving hyperbolic Partial Differential Equations (PDEs) and computed with the NASA code, Reacting and Multi-phase Program (RAMP). The solution was then implemented as a starting condition into the NASA DSMC code, Direct Simulation and …

Active Fault-Tolerance Of The Unmanned Aerial Vehicle Automatic Control Systems, Vuong Anh Trung, Nguyen Van Thinh, Nguyen Duc Thanh, Nguyen Quang Vinh, Tran Thuan Hoang

International Journal of Aviation, Aeronautics, and Aerospace

This paper presents an introductory overview of principles of the three-layer hierarchy of active fault-tolerance, providing, determination of the fault type with as many details as enough to get recoverable fault reason and failure toleration by flexible redundancy using; the conception of active fault-tolerant control in abnormal modes is described. Developed models and methods of a systematic approach to fault tolerance in the direction of the effective use of the signal, parametric and structural redundancies and selection of parrying tools. Performed experimental researches of the unmanned aerial vehicle (UAV) automatic control systems (ACS).

Design And Visual Servo Control Of A Mechanical Gripper For Autonomous Strawberry Harvesting, Jonah Mapes

Electronic Theses and Dissertations, 2020-2023

With rising labor costs and high consumer demand, economic conditions are becoming increasingly favorable for mechanization in the strawberry industry. However, virtually all strawberry crops are still picked by hand because the harvesting process is very challenging to automate, and strawberries are susceptible to bruising. For these reasons, the development of a harvester which can avoid damaging the fruit is of interest. Conventional designs for robotic grippers are less than ideal, as precise positioning or force feedback capabilities are required to reduce the risk of bruising. As an alternative, a novel "camera-in-hand" gripper design is presented which effectively avoids bruising …

A Cfd Study Investigating Drag Reduction For Different Offset And Inline Distance For Two Trucks Platooning, Wael Mokhtar, Kyle Dinger, Shardul Kachare, Mdrazib Hossain, Colin Britcher

Mechanical & Aerospace Engineering Faculty Publications

The automotive industry invests huge resources to improve fuel consumption of commercial vehicles by improving their aerodynamic efficiency. Recently, numerous studies investigating the effect of platooning on aerodynamic drag of semi-trucks have been performed by researchers indicating a positive impact. For the present study, a three-dimensional computational study was performed to investigate the effect of varying offset and linear distance during platooning on the total drag of two semi-trucks. The study was conducted on a full-scale model using Reynold’s Averaged Navier-Strokes governing equations for a moving ground simulation using the STAR-CCM+ computational package. Furthermore, for turbulence, the standard k- …

The Use Of Polyvinyldene Fluoride (Pvdf) Films For Pressure Measurement, Patrick Smith

Summer Community of Scholars Posters (RCEU and HCR Combined Programs)

No abstract provided.

Experimentation And Simulation Of Pulsed Eddy Current Thermography Of Subsurface Aircraft Corrosive Defects, Johnathan Hernandez

Electronic Theses and Dissertations, 2020-2023

During the life cycle of aircraft, external structures are under constant attack from environmental degradation in the form of corrosion. Corrosive defects consist of multiple types of surface and subsurface damage that are often undetectable due to surface coatings or insulation leading to loss in structural integrity. Non-destructive techniques for corrosion detection typically require the removal of paint. Detection of corrosion under insulation (CUI) is highly valuable for cost and time effectiveness. Although techniques have been developed for detection of CUI, not many of these satisfy the criteria for portability and hangar operation. To address this, multiple techniques were investigated …

Evaluation Of Convective Heat Transfer Numerical Methods On Rough Surfaces From Additive Manufacturing, Jose Urcia

Electronic Theses and Dissertations, 2020-2023

The high versatility of additive manufacturing has led to an increase in use in a number of different fields. Surface roughness then comes as a natural consequence of additive manufacturing which interferes with a smooth wall assumption such as those found in gas turbine blades. The Discrete Element Roughness Method (DERM) has been used to improve convective heat transfer predictions on surface roughness. This work aims to validate the core momentum and heat transfer correlation of DERM through an evaluation of Computational fluid dynamics (CFD)-based solution of the flow around individual roughness elements with the goal of improving the correlations. …

Flame Stabilization Of A Premixed Jet In Vitiated Coflow, Tyler Owens

Theses and Dissertations--Mechanical and Aerospace Engineering

Premixed staged combustion in gas turbine engines can reduce emissions by lowering peak flame temperatures but can also lead to different stability characteristics when compared to traditional combustors. High pressure ratio and subsequently high temperatures can lead to conditions suitable for both autoignition and premixed flame propagation in an environment where spatial fuel/air variations are present.

An experimental facility which issues a premixed jet into a coflowing vitiated mixture was studied to examine the stability behavior, resulting in a lifted flame. The effective ignition delay observed flame was much greater than homogeneous ignition delay calculations for the same conditions. It …

Development Of Universal Solver For High Enthalpy Flows Through Ablative Materials, Umran Duzel

Theses and Dissertations--Mechanical and Aerospace Engineering

Atmospheric entry occurs at very high speeds which produces high temperature around the vehicle. Entry vehicles are thus equipped with Thermal Protection Systems which are usually made of ablative materials. This dissertation presents a new solver that models the atmospheric entry environment and the thermal protection systems. In this approach, both the external flow and the porous heat shield are solved using the same computational domain. The new solver uses the Volume Averaged Navier-Stokes Equations adapted for hypersonic non-equilibrium flow, and is thus valid for both domains. The code is verified using analytical problems, set of benchmarks and also a …

Efforts In Numerical Modeling Of Undulating Propulsion, George Loubimov

Electronic Theses and Dissertations, 2020-2023

Naval propulsion is a critical component for every vessel, and it is the subject of this thesis, specifically bio-inspired propulsion. Numerical modeling is used as a tool to understand the relationship between mechanical undulation and the hydrodynamic response. Through three stages, the research presented here examines and refines tools for understanding fundamentals of undulating propulsion. Those three objectives are: to verify and validate the proposed numerical models against existing experiments, establishing a baseline of fidelity; to examine the causal linkage between fluid-boundary interactions and undulating propulsion; and to create a moment based method for characterizing generalized undulating propulsive mechanisms. First, …

Comparison Of Reynolds-Averaged Navier-Stokes Turbulence Models For Simulating Boundary Layers In Hypersonic Flows, Jorge-Valentino Kurose Bretzke

Masters Theses

“This study describes the use of Computational Fluid Dynamics (CFD) codes to simulate hypersonic boundary layers using several different turbulent closure models and comparing Reynolds-Averaged Navier-Stokes (RANS) simulations against Direct Numerical Simulations (DNS) of similar test cases. The test cases in this study consist of a flat plate in a Mach 8 freestream with a zero pressure gradient and wall recovery ratio of 0.48, as well as a Mach 8 axisymmetric nozzle also with a cold wall. The RANS models used in this study are the Spalart-Allmaras model, Baldwin-Lomax model, Menter K-Omega Baseline and Menter K-Omega Shear Stress Transport models. …