Open Access. Powered by Scholars. Published by Universities.®

Aerodynamics and Fluid Mechanics Commons™

Open Access. Powered by Scholars. Published by Universities.®

Journal

Discipline
Institution
Keyword
Publication Year
Publication

Articles 1 - 30 of 67

Full-Text Articles in Aerodynamics and Fluid Mechanics

Modeling Of Supersonic Wave And Shock Propagation Using The Lattice Boltzmann Method, Timothy P. Schroeder Aug 2026

Modeling Of Supersonic Wave And Shock Propagation Using The Lattice Boltzmann Method, Timothy P. Schroeder

Beyond: Undergraduate Research Journal

The lattice Boltzmann method (LBM) has emerged as a mesoscopic alternative to traditional Navier-Stokes solvers for modeling fluid dynamics offering advantages in computational efficiency, parallelization, and handling of complex boundaries. Despite these strengths, accurately reproducing compressible, shock-driven phenomena remains challenging. This study investigates the performance of LBM in simulating the Sod shock tube problem, a classical benchmark for compressible flow-using both single and double distribution function formulations across one- and two-dimensional lattice stencils. A MATLAB-based solver was developed to model the flow under isothermal conditions and compared to the analytical solution using the L2 norm error. The one-dimensional models achieved …

Go to article

Simulations Of Phugoid Motion Of Jal 123, Dereth J J. Drake Scheuermann Aug 2026

Simulations Of Phugoid Motion Of Jal 123, Dereth J J. Drake Scheuermann

Georgia Journal of Science

Airplanes rely on a balance between the four forces of flight: lift, weight, thrust, and drag. If these forces are balanced, the airplane will remain stable. However, if structurally or systematically compromised, the motion can rapidly become unstable. In the aviation industry, mistakes in repairs and aircraft design can lead to accidents causing the loss of life in some cases. In this article, we will be analyzing what happened 70 Japan Airlines flight 123 and how the flight’s motion deteriorated due to a defective repair. More specifically, we will discuss the aerodynamic effects of phugoid motion and how it developed …

Go to article

Powered Parachute Vehicle For Crew Transportation On Mars, Louis J. Spier Jul 2026

Powered Parachute Vehicle For Crew Transportation On Mars, Louis J. Spier

Beyond: Undergraduate Research Journal

To support possible future human presence on Mars where bases are likely to be spread apart, aerial vehicles could be used to transport crew and cargo between them. Designing and operating such a vehicle is very challenging because of the low atmospheric density on Mars compared to Earth, the logistics involved with transporting it to Mars, and the infrastructure necessary to operate it. This study discusses the problems involved with designing, building, and operating fixed-wing and powered parachute aircraft on Mars and presents a concept involving a powered parachute vehicle utilizing an inflatable parachute wing that can be packed together …

Go to article

Numerical Method For Strongly Variable-Density Flows At Low Mach Number: Flame-Sheet Regularisation And A Mass-Flux Immersed Boundary Method, Matheus P. Severino, Fernando F. Fachini, Elmer M. Gennaro, Daniel Rodríguez, Leandro F. Souza Jun 2026

Numerical Method For Strongly Variable-Density Flows At Low Mach Number: Flame-Sheet Regularisation And A Mass-Flux Immersed Boundary Method, Matheus P. Severino, Fernando F. Fachini, Elmer M. Gennaro, Daniel Rodríguez, Leandro F. Souza

Mathematical Modelling and Numerical Simulation with Applications

A low-Mach-number flow, in the laminar regime, has intrinsically two characteristic spatial scales for a given time scale, or two characteristic temporal scales for a given spatial scale, and these dual scales are very different due to the disparity between the flow and acoustic speed. Therefore, low-Mach-number flows impose mathematical and computational challenges in their description. Standard numerical methods for compressible flows, which are typically designed for problems with a single dominant spatial and temporal scale, require alternative approaches, such as preconditioning techniques or solvers tailored for low-Mach-number equations. The present work introduces a simplified fluid dynamics model for flows …

Go to article

Effect Of Rotating Cylinder On Boundary Layer Behavior And Aerodynamic Performance Of Naca 0015 Airfoil, K. Suresh, Inamul Hasan Jun 2026

Effect Of Rotating Cylinder On Boundary Layer Behavior And Aerodynamic Performance Of Naca 0015 Airfoil, K. Suresh, Inamul Hasan

Mansoura Engineering Journal

Flow separation over airfoils at moderate and high angles of attack leads to a significant degradation in aerodynamic performance. Active boundary layer control using moving surfaces provides an effective approach to delay separation and enhance lift. In this study, the aerodynamic efficiency of a NACA 0015 airfoil equipped with a rotating leading edge cylinder is numerically investigated using computational fluid dynamics. Simulations are carried out for a range of angles of attack and cylinder surface speed ratios at low Reynolds numbers like Re = 1.2 x105. The rotating cylinder injects momentum into the boundary layer, promoting flow attachment on the …

Go to article

Slender And Nonslender Delta Wing Simulation And Analysis, Aashish Gyawali, Brinda Bhattarai, Nishesh Bista, Sundeep Rao Dr Mar 2026

Slender And Nonslender Delta Wing Simulation And Analysis, Aashish Gyawali, Brinda Bhattarai, Nishesh Bista, Sundeep Rao Dr

Journal of Aviation Technology and Engineering

Stability, controllability, and maneuverability are critical factors for aircraft with short takeoff and landing distances, such as modern fighter aircraft and unmanned aerial vehicles. Delta wings are commonly employed in these aircraft due to their efficient aerodynamics, enabling high maneuverability, and performance at both low and high speeds. Nonslender wings are used for low-speed performance and agility, while slender wings offer reduced drag and are suited for high-speed operations. In flight, an aircraft encounters different airflow patterns including vortices that circulate from the higher-pressure lower side of the wing to the lower-pressure upper side, contributing to lift generation. However, as …

Go to article

An Engineering Solution For Fan Aeroacoustics Measurements Correction In A Non-Anechoic Testing Environment, Saad-Eldin Taha, Mohamed Y.Zakaria, Mohamed Abdelgaied, M.M. Bassuoni Prof. Dr. Jun 2025

An Engineering Solution For Fan Aeroacoustics Measurements Correction In A Non-Anechoic Testing Environment, Saad-Eldin Taha, Mohamed Y.Zakaria, Mohamed Abdelgaied, M.M. Bassuoni Prof. Dr.

Journal of Engineering Research

Abstract- Nowadays, acoustic signatures of daily used applications are to be minimized. The study of noise generated through aerodynamic interaction with moving bodies has passed through different phases since the early 50s, and this leads to the evolvement of many analytical, empirical and computational techniques in order to be able to estimate the emitted noise. Concerning fan blades, until now the researches are still going for a reliable method for noise estimation during the early phases of design which help in the development of blades with a lower aeroacoustic signature, the Brooks, Pope and Marcolini (BPM) model was chosen to …

Go to article

L2 Certification Rocket Launch, Seungyou Cho Apr 2025

L2 Certification Rocket Launch, Seungyou Cho

SACAD: Scholarly Activities

The LOC 835 high-power rocket with J275W-12 motor at Argonia, KS, for L2 certification, was auspiciously launched and returned. J means the motor can exert 640-1280 Ns of impulse, which makes a sizeable propelling sound. Even though four main hindrances occurred from the construction to the launch, the issues were revised correctly. The rail button and the tracker were severe issues, so I devised the method of drilling a hole for the rail button, but there was no way to replace a broken tracker. The wind speed on the launch day was so strong that the rocket flew 1-2 miles …

Go to article

Enhancing Gas Cyclone Performance With Exit Diffusers, Omar Mohamed Mourad Dwidar, Yasser El-Shaer, Khairy Elsayed, Seyyed Hossein Hosseini, Goodarz Ahmadi Mar 2025

Enhancing Gas Cyclone Performance With Exit Diffusers, Omar Mohamed Mourad Dwidar, Yasser El-Shaer, Khairy Elsayed, Seyyed Hossein Hosseini, Goodarz Ahmadi

Journal of Engineering Research

This study evaluates seven cyclone designs to enhance pressure drop and collection efficiency (CE), using the conventional cyclone as a baseline. While the conventional design is efficient in particle collection, it experiences significant energy losses due to high values of pressure drops. This study introduces exit diffusers with various configurations—A, B, C, D, E, and F—to improve cyclone performance. Computational Fluid Dynamics (CFD) simulations were used to analyse the pressure drop, tangential velocity, and static pressure at different levels of each cyclone. The findings reveal that cyclone D achieves a 41.1% reduction in pressure drop but at the cost …

Go to article

The Problem Of Reducing The Wave Resistance Of Blunt Bodies At Supersonic And Hypersonic Velocities, Oleksandr M. Shyiko, Olexii A. Оbukhov Jan 2025

The Problem Of Reducing The Wave Resistance Of Blunt Bodies At Supersonic And Hypersonic Velocities, Oleksandr M. Shyiko, Olexii A. Оbukhov

Journal of Aviation Technology and Engineering

A new method for reducing the aerodynamic wave drag of blunt bodies in supersonic and hypersonic flows is considered. The method is based on the destruction of the detached head shock wave by placing a family of thin needle elements of a cone-shaped or cylindrical type on the blunt surface. This qualitatively changes the gas-dynamic flow pattern and leads to a new positive quantitative effect. The bow shock wave breaks up into a series of local interacting shock waves of lower intensity, which leads to a decrease in the wave drag of the streamlined body. Variants of hemispherical blunting of …

Go to article

Review: Dielectric Barrier Discharge Plasma Actuators For In-Flight Applications, Sabeel Saleem Mohammed Jan 2025

Review: Dielectric Barrier Discharge Plasma Actuators For In-Flight Applications, Sabeel Saleem Mohammed

Anthós

Dielectric barrier discharge (DBD) is a phenomenon observed when high voltage is passed through a dielectric barrier at high frequencies. Current DBD plasma actuators (PAs) excel at laminar fluid boundary layer control but suffer from limited momentum flux and fluid mechanic inefficiencies. In this article, Mohammed analyzes previous discourse on DBD PAs and offers directions for future research and potential DBD PA applications. Previous work on DBD PAs documented thrust generation at high voltages and frequencies, thrust in varying fluid compositions, and vortex generation. However, certain arrangements hinder flow magnitudes, limiting the use of multiple DBD PAs in close proximity. …

Go to article

Impact Of Weather Systems On Uav Parameters Using Computational Fluid Dynamics, Saif Aljuhaishi, Yaseen K. Al-Timimi, Basim I. Wahab Nov 2024

Impact Of Weather Systems On Uav Parameters Using Computational Fluid Dynamics, Saif Aljuhaishi, Yaseen K. Al-Timimi, Basim I. Wahab

Karbala International Journal of Modern Science

Since drones cannot fly in any kind of weather, they are not safe for time-sensitive activities. The study examines how the passage of weather systems in Iraq leads to the ban on drone flights, and how these weather conditions impact the aerodynamic forces of the drone. Hourly climate data for the study area were obtained from ECMWF ERA5 and CAMS in NetCDF format for four climate stations (Erbil, Baghdad, Rutbah, and Basrah). A ScanEagle drone was chosen for this study. The Python programming language was used to perform mathematical operations to calculate the ban on drone flights. ArcGIS 10.8 was …

Go to article

Computational Fluid Dynamics Visualization For Unmanned Aerial Systems In Bridge Inspections, Kristoffer B. Borgen, John Mott Jul 2024

Computational Fluid Dynamics Visualization For Unmanned Aerial Systems In Bridge Inspections, Kristoffer B. Borgen, John Mott

Journal of Aviation Technology and Engineering

Bridge inspections are an expensive and time-consuming process, varying significantly with a bridge’s style, height, width, and length. Inspections create interruptions that interfere with bridge use, as the examination requires partial or total closure, causing traffic delays. Unmanned aerial system (UAS) use has increased significantly over the past decade, including assistance and coordination during bridge inspections. However, the impact on a UAS from high winds and turbulent airflows induced by a bridge’s structure can decrease flight safety during inspections. Visualization of these hazards is difficult for UAS operators; therefore, a process to estimate the velocity and locations of these hazardous …

Go to article

Optimization Of High-Bypass Turbofan High-Pressure Compressor Blade – A Case Study, Adeel Khalid, Vlad Mandzyuk Jan 2024

Optimization Of High-Bypass Turbofan High-Pressure Compressor Blade – A Case Study, Adeel Khalid, Vlad Mandzyuk

The Kennesaw Journal of Undergraduate Research

This research determines the relationship between the High-Pressure Compressor (HPC) rotor blade design variables and compressor pressure ratio of a high bypass turbofan engine. Alterations in the HPC blades span, chord, taper, twist, number, and angle of incidence are performed and their effect on the HPC pressure ratio is observed. The objective is to determine key parameters that could maximize the performance of a high-pressure compressor for a given mission. Physics-based modeling, Computational Fluid Dynamics (CFD), and wind-tunnel testing are performed to compare and validate findings. Physics-based modeling is performed to serve as the benchmark for data obtained through other …

Go to article

Winglet Vortex Optimization, Adeel Khalid, Anthony Gutierrez Jan 2024

Winglet Vortex Optimization, Adeel Khalid, Anthony Gutierrez

The Kennesaw Journal of Undergraduate Research

The objective of this research is to determine the effect on aerodynamic performance due to changes of winglet design variables of the Boeing 737-700 aircraft. The various winglet types studied in this research include the blended, canted, wingtip fence and split scimitar. The variables include height, sweep angle, taper ratio, and inclination angle. These variables are altered in 5% increments from -15% to +15% of their original baseline values. Each altered winglet design only changes one variable at a time while keeping all other variables constant. The altered models are compared to the original by finding the aerodynamic efficiency through …

Go to article

Steady And Transient Study Of Conjugate Heat Transfer In Regenerative Cooled Nozzle, Khaled Bensayah, Khadidja Kamri Nov 2023

Steady And Transient Study Of Conjugate Heat Transfer In Regenerative Cooled Nozzle, Khaled Bensayah, Khadidja Kamri

Emirates Journal for Engineering Research

The Heat transfer is one of the most serious challenges that exist in a supersonic nozzle flow. The combustion chamber wall and the nozzle are exposed to high-temperature gases during combustion and gas expansion, which can eventually lead to structural failure. This paper reports a computational study of steady and transient conjugate heat transfer in regenerative water cooled nozzle. Numerical computation solved Reynolds-averaged equations based on RSM-Omega turbulence model coupling with solid-phase heat conduction equation and with coolant-phase. The effect of four inlet cooled approach length 0 inch, 6 inch, 12 inch and 18 inch are studied and validated against …

Go to article

A New Empirical Law For The Prediction Of The Zero-Lift Pitching Moment Coefficient Of Swept And Tapered Wings, Mondher Yahyaoui Sep 2023

A New Empirical Law For The Prediction Of The Zero-Lift Pitching Moment Coefficient Of Swept And Tapered Wings, Mondher Yahyaoui

Journal of Aviation Technology and Engineering

A new empirical law for the prediction of the zero-lift pitching moment coefficient of trapezoidal wings with linear twist and constant taper and sweep in subsonic flow is introduced. This law is quite general in that it does not rely on the use of charts and spans the normal range of values of taper ratio, aspect ratio, and sweep for subsonic aircraft. It does not, however, accommodate different airfoils along the wingspan and only positive sweep has been considered. The empirical law was first derived for the incompressible regime and then an additional empirical law for the compressibility effect has …

Go to article

An Analysis Of Aerodynamic Design Issues Of Box-Wing Aircraft, Paul Jemitola, Paul Okonkwo Sep 2023

An Analysis Of Aerodynamic Design Issues Of Box-Wing Aircraft, Paul Jemitola, Paul Okonkwo

Journal of Aviation Technology and Engineering

The potential of the joined/box-wing aircraft as an environmentally friendly airliner that is capable of meeting current and future emission thresholds led to the investigation of this concept. This study reviews the evolution and current trends in the aerodynamic design of the box-wing aircraft with specific emphasis on box-wing theory, airfoil characteristics, and aerodynamic issues of the box-wing aircraft. The study was undertaken to highlight the distinct features of the box-wing configuration which make it very attractive for future airliners. The study reveals that the box-wing aircraft possesses a significant aerodynamic advantage over conventional aircraft. The box-wing aircraft configuration is …

Go to article

Sources Of Resonant Vortices In Aero-Acoustics Resonance From Tandem Flat Plates, Atef El Khatib, Ahmad Al Miaari, Ali Hammoud Jun 2022

Sources Of Resonant Vortices In Aero-Acoustics Resonance From Tandem Flat Plates, Atef El Khatib, Ahmad Al Miaari, Ali Hammoud

BAU Journal - Science and Technology

Aero-acoustic resonance in flows around flat plates is a major design concern in various practical applications, especially turbomachinery and heat exchangers, due to its significant effects on fatigue rates and radiated noises intensity. Although research has been intensive on the topic, there is still a lot to be understood for effective resonance prediction and control. Resonance in tandem plate systems is characterized by a double response. This study, investigates for the first time, the flow mechanisms responsible for the generation of low-velocity and high-velocity resonances of the double resonance response. Experimental testing and numerical simulation showed that low-velocity resonance vortices …

Go to article

Structural Dynamics Of Awt-27 Wind Turbine Blade, Amr Ismaiel Jun 2022

Structural Dynamics Of Awt-27 Wind Turbine Blade, Amr Ismaiel

Future Engineering Journal

Wind energy is one of the world’s current leading renewable energy resources. One of the major aspects of studying wind turbines is the structural dynamics for the turbine structure including blades and support structure. In the current work, the blades of the Advanced Wind Turbine (AWT-27) are investigated in a dynamic approach. Different wind fields have been generated for the study to provide different Design Load Conditions (DLCs). Three laminar wind velocities of 5 m/s, 12 m/s, and 17 m/s were simulated. Turbulent wind flow fields have also been generated at the three standard classes A, B and C of …

Go to article

Modelling Air Quality In An Aircraft Passenger Cabin Using Health Care Standards, Bert Silich Jan 2022

Modelling Air Quality In An Aircraft Passenger Cabin Using Health Care Standards, Bert Silich

International Journal of Aviation, Aeronautics, and Aerospace

The interest in aerosol contamination of aircraft passenger cabins has increased since the onset of the COVID-19 pandemic. Mathematical models have been developed to help describe how an aerosol behaves in a closed space. The number of infectious particles inhaled is of scientific interest because it can be related to the risk of getting ill from a pathogen. The data required to calculate these results is often difficult to obtain in real world settings. In fact, particle inhalation details are not obtained in the day-to-day routine of a health care environment and are they not required to maintain safety. Hospital …

Go to article

Airplane Pitch Response To Rapid Configuration Change: Flight Test And Safety Assessment, Ralph Kimberlin, Markus Wilde, Brian Kish, Isaac Silver Apr 2021

Airplane Pitch Response To Rapid Configuration Change: Flight Test And Safety Assessment, Ralph Kimberlin, Markus Wilde, Brian Kish, Isaac Silver

Journal of Aviation Technology and Engineering

This paper examines airplane response to rapid flap extension on seven general aviation airplanes. The scenario involves a pilot flying in the traffic pattern becoming distracted, abruptly extending flaps while looking outside the airplane, and failing to notice airspeed and pitch-attitude changes. The airplanes tested reached pitch forces of up to 36 lbf, meeting FAA requirements but exceeding the capability of 55% of the population. Flight data showed a pitch-up to more than 30˚ in 5 s after flap extension, causing airspeed to drop below stall speed for four of the airplanes. At traffic pattern altitudes, stalling an airplane can …

Go to article

Data-Driven Tools Guided By First-Principles For Scale Modeling, Sadegh Poozesh Jan 2021

Data-Driven Tools Guided By First-Principles For Scale Modeling, Sadegh Poozesh

Progress in Scale Modeling, an International Journal

For decades, traditional scale-modeling techniques have been relying on first-principles models (FPMs). FPMs have been used to find non-dimensional numbers (PIs) and identify normalized underlying forces and energies behind the phenomenon in focus. The two main challenges with FPM-based PIs extraction are finding the relevant PIs and proper correlations between PIs. The emergence and surge of data-driven modeling (DDM) provide a new opportunity to leverage experimental data in model development across scales/plants. In this paper, first, the two mentioned issues in PIs development will be elaborated to reveal the gap, and second, a new insight into scale modeling and similarity …

Go to article

Comparative Study On The Prediction Of Aerodynamic Characteristics Of Mini - Unmanned Aerial Vehicle With Turbulence Models, Somashekar V, Immanuel Selwyn Raj A Jan 2021

Comparative Study On The Prediction Of Aerodynamic Characteristics Of Mini - Unmanned Aerial Vehicle With Turbulence Models, Somashekar V, Immanuel Selwyn Raj A

International Journal of Aviation, Aeronautics, and Aerospace

When dealing with CFD simulations the turbulent nature is seen on most of the engineering flows and these flows need to be solved. Reliable and applicable CFD outputs can be obtained from the accurate modelling of the turbulence as it is one of the most vital elements of CFD modelling. The RANS equations are extensively employed to analyse the complex flows over aircraft and for this purpose, a turbulence model is needed for turbulent flow analyses. Compatible turbulence must be chosen for the exact predictions of aircraft aerodynamic characteristics. In this report, numerical analyses of Mini-UAV are done to compare …

Go to article

A Model For Inhalation Of Infectious Aerosol Contaminants In An Aircraft Passenger Cabin, Bert A. Silich Jan 2021

A Model For Inhalation Of Infectious Aerosol Contaminants In An Aircraft Passenger Cabin, Bert A. Silich

International Journal of Aviation, Aeronautics, and Aerospace

Aerosol contamination of an aircraft cabin by infectious passengers is a concern of passengers, aircrew and the aviation industry. This may be especially important during a pandemic, such as COVID-19, where the full extent of aerosol transmission is not well understood. A statistical method to determine the number of infectious passengers on board along with a mathematical model estimating the contaminant concentration of aerosols in the cabin and the number of inhaled infectious particles by passengers is presented. An example is used to demonstrated how the results can be estimated during normal operations and emergency conditions with malfunctions of the …

Go to article

Numerical Analysis Of Aerospike Engine Nozzle Performance At Various Truncation Lengths, Sam Dakka Dr, Oliver Dennison Jan 2021

Numerical Analysis Of Aerospike Engine Nozzle Performance At Various Truncation Lengths, Sam Dakka Dr, Oliver Dennison

International Journal of Aviation, Aeronautics, and Aerospace

The aerospike engine was first devised in the early 1960s where it provided new means of reaching orbit in a single stage. The paper aimes to demonstrate the viability of the technology by showcasing the increased nozzle thrust efficiency over the conventional bell nozzle. Various truncations were applied to the nozzle and each was subjected to two conditions, an over-expansion and near optimum condition. The nozzle contour was developed using the simple approximation method and was chosen to replicate that of the XRS-2200. This anchored the data, thereby validating the computational fluid dynamics (CFD) simulation. Simulations were completed for at …

Go to article

Aerodynamic Performance Analysis Of Co-Flow Jet Airfoil, C M Vigneswaran, Vishnu Kumar G C Jan 2021

Aerodynamic Performance Analysis Of Co-Flow Jet Airfoil, C M Vigneswaran, Vishnu Kumar G C

International Journal of Aviation, Aeronautics, and Aerospace

The work in this paper aims to increase the maximum lift coefficient of the airfoil by implementing the co-flow jet concept on NACA 0018 airfoil and also to investigate the performance of co-flow jet (CFJ) airfoil. To conduct numerical solution, RANS equations have been solved for 2D incompressible and unsteady flow using the Spalart-Allmaras turbulence model. The suction surface of the airfoil is modified by placing the injection slot near the leading edge and the suction slot near the trailing edge. A small mass of air is withdrawn into the airfoil suction slot, pressurized by a pumping system located inside …

Go to article

Identification Of Wind-Induced Hazard Zones Impacting Uas Bridge Inspection, Jack J. Green, John Mott Jan 2021

Identification Of Wind-Induced Hazard Zones Impacting Uas Bridge Inspection, Jack J. Green, John Mott

International Journal of Aviation, Aeronautics, and Aerospace

Unmanned Aerial Systems (UAS) continue to grow in both popularity and utility within the national airspace system. The use of commercial UAS for civil inspection, specifically that of bridge structures, is becoming commonplace among practitioners and academics alike. The development of an integrated bridge-inspection hazard model provides a way for UAS operators to prepare for and respond to changing environmental conditions that could otherwise prevent a successful UAS flight. The interaction of wind-induced airflow with bridge surfaces creates an aerodynamic wake that can result in hazardous conditions for a UAS platform operating in close proximity. An analysis of this airflow …

Go to article

Albatross And Falcon Inspired Bionic Uav: An Aerodynamic Analysis, Bilji C. Mathew, Sagar K. Sahu, Prantik Dutta, Rushi Savale, Muruga Lal Jeyan Jv Dr. Jan 2021

Albatross And Falcon Inspired Bionic Uav: An Aerodynamic Analysis, Bilji C. Mathew, Sagar K. Sahu, Prantik Dutta, Rushi Savale, Muruga Lal Jeyan Jv Dr.

International Journal of Aviation, Aeronautics, and Aerospace

The drone industry yearns for enhanced aerodynamic performance. In order to achieve this feat, researchers and engineers are trying to mimic the natural flyers due to their aerodynamic optimality. One such flyer, the Albatross is an inspiration for many marine drones due to its planform and aerodynamic efficiency. The wing of the plan form is designed and simulated to study its properties. The Bell-Shaped Lift Distribution is incorporated for higher efficiency and elimination of the total downwash produced in case of an Elliptical Lift Distribution. A blended wing body inspired by the Falcon is used for smoother airflow interactions. Furthermore, …

Go to article

Comparative Study On Performance Accuracy Of Three Probe And Five Probe Flow Analysers For Wind Tunnel Testing, Akhila Rupesh Ms, J V Muruga Lal Jeyan Dr Jan 2021

Comparative Study On Performance Accuracy Of Three Probe And Five Probe Flow Analysers For Wind Tunnel Testing, Akhila Rupesh Ms, J V Muruga Lal Jeyan Dr

International Journal of Aviation, Aeronautics, and Aerospace

In the field of inviscid fluid flow studies, the theoretical concept has to be developed even more. In order to make it possible, it is very important to supplement the concepts with strong experimental results. While performing experimentation, various accepts of design can be determined with factors influencing the and also required modification can be recommended in a more systematic and economic manner. Also, the aim objective of the experiment is to extend the underlying theory and to produce new designs with improvements that can be great support to the advancement in technology. In experimental analysis, wind tunnels are used …

Go to article

Next Last