Aerodynamics and Fluid Mechanics Commons^™

Multiphysics Transport In Porous Thermal Protection Systems: Experimental Characterization Of Gas Permeability And Radiative Properties, Yejajul Hakim

Theses and Dissertations--Mechanical and Aerospace Engineering

Porous thermal protection systems (TPS) used in hypersonic vehicles exhibit coupled gas and radiative transport across multiple regimes and length scales. Accurate performance prediction requires reliable characterization of permeability, slip-flow behavior, and radiative transport properties, particularly for low-permeability and charred materials where existing data are limited. This dissertation presents experimental methods for characterizing multiphysics transport in porous TPS materials. A modular flow system was developed to measure permeability and slip behavior in both virgin and charred materials under relevant environments. A transient pressure decay method enables accurate permeability estimation in low-permeability regimes and provides insight into effective pore structure. Results …

Numerical Investigation Of Wind Disturbance Around A Multirotor Uav In Crosswind And Vertical Flight, Garrison Page

Theses and Dissertations--Mechanical and Aerospace Engineering

Uncrewed Aerial Vehicles (UAVs) are being increasingly utilized in a wide range of research applications, especially in meteorology. This is due to such factors as their ease of use, maneuverability compared to other forms of data collection, and for rotor- craft, the ability to hover. However, the rotorwash generated by UAVs can introduce significant disturbances, potentially affecting measurement accuracy from sensors. While several studies have investigated the rotorwash of individual UAVs utilizing Particle Image Velocimetry (PIV) and Computational Fluid Dynamics (CFD), there is limited exploration into how different rotor configurations and external wind conditions influence regions of turbulent flow around …

Development Of An Immersed Boundary Method-Wall Modeled Large Eddy Simulation Approach For Incompressible Flows And Aeroacoustic Predictions, John C. Higgins

Theses and Dissertations--Mechanical and Aerospace Engineering

The performance capabilities of rotorcraft have improved significantly in the past decade as both manned and unmanned rotorcraft become a larger part of future transportation systems. Private companies as well as various government offices have worked to develop capabilities ranging from transportation/package delivery to intelligence/surveillance to livestock monitoring. Their practicality in both rural and urban areas, however, is questionable due to the significant tonal and broadband noise which is produced by the rotors. Public acceptance of rotorcraft, namely small Unmanned Aerial Vehicles (sUAVs), in transportation systems is an issue largely associated with the noise generation and it's effect on nearby …

Direct Numerical Simulation Of Pulsating Flow In Curved Pipes: Insights Into Aortic Dissection In Humans, Gokul Anugrah Gopakumar

Theses and Dissertations--Mechanical and Aerospace Engineering

This dissertation investigates the hemodynamics of pulsating blood flow in curved vessels through direct numerical simulations (DNS), with the overarching aim of uncovering fluid dynamic mechanisms linked to the onset and progression of aortic dissection in humans. The work is structured in two parts: (i) fundamental studies in idealized geometries and (ii) preliminary investigations in patient-specific anatomies. In the first part, curved pipe models representing the aortic arch are used to isolate the effects of pulsation frequency, amplitude ratio, and curvature ratio on transitional and turbulent flow dynamics. The simulations reveal that curvature-driven centrifugal forces shift the peak velocity toward …

High-Altitude Balloon-Launched Uncrewed Aircraft System Measurements Of Atmospheric Turbulence And Qualitative Comparison With Infrasound Microphone Response, Anisa Haghighi

Theses and Dissertations--Mechanical and Aerospace Engineering

This study explores the use of a balloon-launched uncrewed aircraft system (UAS) to measure atmospheric turbulence in the troposphere and lower stratosphere using both wind velocity measurements and infrasonic acoustic energy. The UAS, a glider configured for autonomous descent along a predefined trajectory, had on board, in situ sensors to capture thermodynamic and kinematic atmospheric parameters. Additionally, it carried an infrasonic microphone to evaluate its potential for remotely detecting clear-air turbulence by capturing infrasonic waves. The system’s performance was assessed over the course of three test flights conducted in New Mexico, USA, in 2021. The descent enabled high-resolution profiling, with …

Kentucky Re-Entry Universal Payload System (Krups): Second Atmospheric Re-Entry Flight, Kirsten F. Ford

Theses and Dissertations--Mechanical and Aerospace Engineering

Kentucky Re-entry Universal Payload System (KRUPS) is a small-scale re-entry capsule developed at the University of Kentucky. The KRUPS project began in 2013 with the aspiration of providing an affordable and repeatable method of collecting data on the re-entry environment. Numerically-based methods used to model re-entry require experimental data to validate their predictions. However, re-entry data is not easily obtained. Flight tests of re-entry vehicles require extensive time and resources, including a substantial financial burden. Alternatively, ground testing is not able to accurately and completely replicate the complex re-entry environment. Thus, there is a need for an inexpensive and accessible …

High-Fidelity Coupling For Studies Of Ablative Materials At Hypersonic Conditions, Aleksander Zibitsker

Theses and Dissertations--Mechanical and Aerospace Engineering

The development of accurate models and robust numerical tools for simulating ablative thermal protection materials (TPMs) in hypersonic flows is crucial for advancing atmospheric entry and hypersonic technologies. Traditional methods for simulating ablative materials often rely on heavy assumptions, such as equal heat and mass transfer coefficients and chemical equilibrium in the boundary layer, leading to conservative thermal protection system (TPS) designs and insufficient accuracy for certain in-flight ablation phenomena.

This work presents a high-fidelity and versatile coupled framework between hypersonic flow and material response solvers. The flow domain is modeled with an innovative overset CHAMPS NBS-Cart solver, which features …

A Computational Fluid Dynamic Analysis Of Oxyacetylene Combustion Flow For Use In Material Response Boundary Conditions, Craig Meade

Theses and Dissertations--Mechanical and Aerospace Engineering

Oxyacetylene torches are used in the aerospace industry and research to test thermal protection system materials (TPS) due to their high flame temperatures and high heat flux capabilities. The purpose of this work is to determine a combustion model to accurately simulate the high temperature flow of an oxyacetylene torch. The flow conditions around a sample material can then be used as boundary conditions when modeling TPS material response. Two separate combustion models with equilibrium chemistry were investigated using ANSYS Fluent™; the Eddy-Dissipation Model, and the Partially Premixed model.The results of this study are compared to existing experiments for validation.

Stratospheric Glider Measurements Of Atmospheric Parameters, Anisa Haghighi

Theses and Dissertations--Mechanical and Aerospace Engineering

In June 2021 a series of high altitude flights were conducted in Spaceport America, NM, using a balloon launched Uncrewed Aircraft System (UAS) to assess its capability to conduct measurements of various atmospheric properties and study turbulence in the troposphere and lower stratosphere. This UAS descends using an automated flight trajectory. The instruments aboard included a NASA-developed infrasonic microphone to evaluate its remote turbulence detection capabilities and a five-hole probe capable of measuring the in situ wind vector. Also on board were temperature, humidity and wind profile sensors. This document focuses on the atmospheric properties measured at high altitudes, the …

Impact Of Spallation And Internal Radiation On Fibrous Ablative Materials, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles are equipped with Thermal Protection Systems (TPS) that encounter high heat rates and protect the payload while entering a planetary atmosphere. For most missions that interest NASA, ablative materials are used as TPS. These materials undergo several mass and energy transfer mechanisms to absorb intense heat. The size and construction of the TPS are based on the composition of the planetary atmosphere and the impact of various ablative mechanisms on the flow field and the material. Therefore, it is essential to quantify the rates of different ablative phenomena to model TPS accurately. In this work, the impact of …

Precision Meteorological Prediction Employing A Data-Driven, Adaptive, Real-Time (Dart) Approach, Sujit Sinha

Theses and Dissertations--Mechanical and Aerospace Engineering

The objective of this research is to improve precision meteorological prediction, benefiting both uncrewed aerial vehicle (UAV) operations by avoiding hazardous flight conditions and tracking contaminant or toxic clouds caused by incidents, accidents, or fires. The operational concept is to collect meteorological observations from instruments mounted on a swarm of UAVs, telemeter the data to a weather simulation model, revise the predicted solution by adapting the flow field to the observations, and then transmit the updated forecast to appropriate personnel as well as to the guidance system of UAVs for repositioning to the next set of most beneficial measurements. While …

A Decoupled Engineering Methodology For Accurate Prediction Of Ablative Surface Boundary Conditions In Thermal Protection Systems, Justin Cooper

Theses and Dissertations--Mechanical and Aerospace Engineering

The main objective of the present work is to demonstrate a method for prediction of aerothermal environments in the engineering design of hypersonic vehicles as an alternative to the current heritage method. Flat plate and stagnation point boundary layer theory require multiple assumptions to establish the current engineering paradigm. Chief among these assumptions is the similarity between mass and heat transfer. Origins of these assumptions are demonstrated and their relationship to conservative engineering design is analyzed, as well as conditions where they possibly break down. An alternative approach for assessing aerothermal environments from the fluid domain is presented, which permits …

Numerical And Scaling Study On Application Of Inkjet Technology To Automotive Coating, Masoud Arabghahestani Dr.

Theses and Dissertations--Mechanical and Aerospace Engineering

A thorough literature review identified lack of precision control over quality of droplets generated by the currently available industrial sprayers and a growing need for higher quality droplets in the coating industry. Particularly, lack of knowledge and understanding in continuous inkjets (CIJ) and drop-on-demand (DOD) technologies is identified as significant. Motivated by these needs, this dissertation is dedicated to computational fluid dynamics (CFD) and scaling studies to improve existing inkjet technologies and develop new designs of efficient coating with single and/or multiple piezoelectric sensors to produce on-demand droplets. This dissertation study aims at developing a new DOD type coating technology, …

Experimental Investigation Of Roughness And Blowing Effects Over Ablator-Like Surfaces, Colby Borchetta

Theses and Dissertations--Mechanical and Aerospace Engineering

Two separate experiments using PIV were carried out to investigate the effects of
roughness and blowing over surfaces geometrically similar to ablation materials used for atmospheric re-entry. The first, water tunnel experiments, employed a dimpled surface similar to AVCOAT, while the second set was completed in a wind tunnel with a material similar to PICA. For the first set, the flow with blowing becomes destabilized, and more disorganized. The blowing disrupts the relatively simple vorticity shedding process and significantly modifies momentum transport via interaction of detached structures. Flow structure and their modifications were examined with a sPOD analysis. The focus …

Measurements Of Wind Turbine Wake Evolution And Trajectory During Morning Boundary Layer Transition And Under Wake Steering Conditions Via Unmanned Aerial Vehicles, Stewart Nelson

Theses and Dissertations--Mechanical and Aerospace Engineering

In July of 2019, a flight campaign was conducted using semi-autonomous Unmanned Aerial Vehicles (UAVs) at the Port Alma Kruger Energy wind farm in Ontario, Canada, to study various aspects of wind turbine wake evolution. Horizontal transects across the wakes were measured using modified fixed-wing aircraft fitted with a five-hole probe to measure the wind velocity vector. Reference boundary layer conditions were measured by an octocopter with an assortment of mounted sensors flying vertical profiles upstream of the turbines. Three experiments were conducted during the campaign, which consisted of a study on wake behavior during the morning boundary layer transition, …

Turbulence Suppression In An Axially Rotating Pipe, Alyn J. Smith

Theses and Dissertations--Mechanical and Aerospace Engineering

The phenomenon of turbulence suppression in a rotating pipe flow system has been well documented by past research and experimentation. Despite this, the methods that drive this phenomenon have not yet been effectively characterized, especially at higher Reynolds numbers. While many experiments have been performed to better understand swirling turbulent pipe flow, a difficulty that arises is how to test for high levels of rotation without reducing the Reynolds number. This thesis documents the design and construction of a new pressurized pipe flow system at the University of Kentucky aimed at achieving high Reynolds numbers without causing a reduction in …

Modeling Thin Layers In Material Response Solvers, Christen Setters

Theses and Dissertations--Mechanical and Aerospace Engineering

Thermal Protection Systems (TPS) are a necessary component for atmospheric entry. Most TPS contain thin layers of various materials such as ceramic coatings, pore sealers and bonding agents. When modeling TPS, these thin layers are often neglected due to the difference in scale between the TPS (centimeters) and the thin layers (micrometers). In this study, a volume-averaging flux-conservation method is implemented in the governing equations of a finite volume material response code. The model proposes the addition of a volume and area fraction coefficient which utilizes a weighted-averaging between the amount of thin layer and heat shield material in a …

A Computational Fluid-Structure Interaction Method For Simulating Supersonic Parachute Inflation, Jonathan Boustani

Theses and Dissertations--Mechanical and Aerospace Engineering

Following the successful landing of the Curiosity rover on the Martian surface in 2012, NASA/JPL conducted the low-density supersonic decelerator (LDSD) missions to develop large diameter parachutes to land the increasingly heavier payloads being sent to the Martian surface. Unexpectedly, both of the tested parachutes failed far below their design loads. It became clear that there was an inability to model and predict loads that occur during supersonic parachute inflation. In this dissertation, a new computational method that was developed to provide NASA with the capability to simulate supersonic parachute inflation is presented and validated. The method considers the loose …

Flame Stabilization Of A Premixed Jet In Vitiated Coflow, Tyler Owens

Theses and Dissertations--Mechanical and Aerospace Engineering

Premixed staged combustion in gas turbine engines can reduce emissions by lowering peak flame temperatures but can also lead to different stability characteristics when compared to traditional combustors. High pressure ratio and subsequently high temperatures can lead to conditions suitable for both autoignition and premixed flame propagation in an environment where spatial fuel/air variations are present.

An experimental facility which issues a premixed jet into a coflowing vitiated mixture was studied to examine the stability behavior, resulting in a lifted flame. The effective ignition delay observed flame was much greater than homogeneous ignition delay calculations for the same conditions. It …

Development Of Universal Solver For High Enthalpy Flows Through Ablative Materials, Umran Duzel

Theses and Dissertations--Mechanical and Aerospace Engineering

Atmospheric entry occurs at very high speeds which produces high temperature around the vehicle. Entry vehicles are thus equipped with Thermal Protection Systems which are usually made of ablative materials. This dissertation presents a new solver that models the atmospheric entry environment and the thermal protection systems. In this approach, both the external flow and the porous heat shield are solved using the same computational domain. The new solver uses the Volume Averaged Navier-Stokes Equations adapted for hypersonic non-equilibrium flow, and is thus valid for both domains. The code is verified using analytical problems, set of benchmarks and also a …

Wing-Tip Vortex Evolution In Turbulence, Hari Charan Ghimire

Theses and Dissertations--Mechanical and Aerospace Engineering

Planar and stereo particle image velocimetry measurements were conducted of a wing-tip vortex decaying in free-stream turbulence in order to understand the evolution of a vortex and its decay mechanism. The vortex decayed faster in the presence of turbulence. The decay of the circulation was found to be almost entirely due to a decrease in circulation of the vortex core, caused by the relative decrease in peak tangential velocity without a corresponding increase in core radius. These events were found to be connected with the stripping of core fluid from the vortex core. The increased rate of decay of the …

Intermittency Effects On The Universality Of Local Dissipation Scales In Turbulent Boundary Layer Flows With And Without Free-Stream Turbulence, Sabah Falih Habeeb Alhamdi

Theses and Dissertations--Mechanical and Aerospace Engineering

Measurements of the small-scale dissipation statistics of turbulent boundary layer flows with and without free-stream turbulence are reported for Re_τ ≈ 1000 (Re_θ ≈ 2000). The scaling of the dissipation scale distribution is examined in these two boundary conditions of external wall-bounded flow.

Results demonstrated that the local large-scale Reynolds number based on the measured longitudinal integral length-scale fails to properly normalize the dissipation scale distribution near the wall in these two free-stream conditions, due to the imperfect characterization of the upper bound of the inertial cascade by the integral length-scale. When a length-scale based on Townsend's …

Verification And Validation Studies For The Kats Aerothermodynamics And Material Response Solver, Olivia Schroeder

Theses and Dissertations--Mechanical and Aerospace Engineering

Modeling the atmospheric entry of spacecraft is challenging because of the large number of physical phenomena that occur during the process. In order to study thermal protection systems, engineers rely on high fidelity solvers to provide accurate predictions of both the thermochemical environment surrounding the heat shield, and its material response. Therefore, it is necessary to guarantee that the numerical models are correctly implemented and thoroughly validated. In recent years, a high-fidelity modeling tool has been developed at the University of Kentucky for the purpose of studying atmospheric entry. The objective of this work is to verify and validate this …

Multiphase Interaction In Low Density Volumetric Charring Ablators, Ali D. Omidy

Theses and Dissertations--Mechanical and Aerospace Engineering

The present thesis provides a description of historical and current modeling methods with recent discoveries within the ablation community. Several historical assumptions are challenged, namely the presence of water in Thermal Protection System (TPS) materials, presence of coking in TPS materials, non-uniform elemental production during pyrolysis reactions, and boundary layer gases, more specifically oxygen, interactions with the charred carbon interface.

The first topic assess the potential effect that water has when present within the ablator by examining the temperature prole histories of the recent flight case Mars Science Laboratory. The next topic uses experimental data to consider the instantaneous gas …

Data-Driven Adaptive Reynolds-Averaged Navier-Stokes K - Ω Models For Turbulent Flow-Field Simulations, Zhiyong Li

Theses and Dissertations--Mechanical and Aerospace Engineering

The data-driven adaptive algorithms are explored as a means of increasing the accuracy of Reynolds-averaged turbulence models. This dissertation presents two new data-driven adaptive computational models for simulating turbulent flow, where partial-but-incomplete measurement data is available. These models automatically adjust (i.e., adapts) the closure coefficients of the Reynolds-averaged Navier-Stokes (RANS) k-ω turbulence equations to improve agreement between the simulated flow and a set of prescribed measurement data.

The first approach is the data-driven adaptive RANS k-ω (D-DARK) model. It is validated with three canonical flow geometries: pipe flow, the backward-facing step, and flow around an airfoil. For all 3 test …

Comparisons Of Ablator Experimental Performance To Response Modeling And Effects Of Water Phase Transition In Porous Tps Materials, David L. Smith

Theses and Dissertations--Mechanical and Aerospace Engineering

The Mars Science Laboratory Entry Descent and Landing Instrumentation (MEDLI) project performed extensive arc jet tests for development, qualification, and calibration of instrumented heat shield plugs. These plugs each contained several thermocouples for recording near-surface and in-depth temperature response of the Phenolic Impregnated Carbon Ablator (PICA) heat shield. The arc jet test results are entered into a comprehensive database so that broad trends across the test series can be compared. One method of analysis is to compare with ablator material response calculations and solve the in-depth heat conduction equations. Using the near-surface thermocouple measurements as a boundary condition in numerical …

Experimental Investigation Of Wall Shear Stress Modifications Due To Turbulent Flow Over An Ablative Thermal Protection System Analog Surface, Jacob Helvey

Theses and Dissertations--Mechanical and Aerospace Engineering

Modifications were made to the turbulent channel flow facility to allow for fully developed rough quasi-2D Poiseuille flow with flow injection through one surface and flow suction through the opposing surface. The combination of roughness and flow injection is designed to be analogous to the flow field over a thermal protection system which produces ablative pyrolysis gases during ablation. It was found that the additional momentum through the surface acted to reduce skin friction to a point below smooth-wall behavior. This effect was less significant with increasing Reynolds number. It was also found that the momentum injection modified the wake …

Modeling Of Spallation Phenomenon In An Arc-Jet Environment, Raghava Sai Chaitanya Davuluri

Theses and Dissertations--Mechanical and Aerospace Engineering

Space vehicles, while entering the planetary atmosphere, experience high loads of heat. Ablative materials are commonly used for a thermal protection system, which undergo mass removal mechanisms to counter the heat rates. Spallation is one of the ablative processes, which is characterized by the ejection of solid particles from the material into the flow. Numerical codes that are used in designing the heat shields ignore this phenomenon. Hence, to evaluate the effectiveness of spallation phenomenon, a numerical model is developed to compute the dynamics and chemistry of the particles. The code is one-way coupled to a CFD code that models …

High Temperature Flow Solver For Aerothermodynamics Problems, Huaibao Zhang

Theses and Dissertations--Mechanical and Aerospace Engineering

A weakly ionized hypersonic flow solver for the simulation of reentry flow is firstly developed at the University of Kentucky. This code is the fluid dynamics module of known as Kentucky Aerothermodynamics and Thermal Response System (KATS). The solver uses a second-order finite volume approach to solve the laminar Navier– Stokes equations, species mass conservation and energy balance equations for flow in chemical and thermal non-equilibrium state, and a fully implicit first-order backward Euler method for the time integration. The hypersonic flow solver is then extended to account for very low Mach number flow using the preconditioning and switch of …

Inkjet Printing: Facing Challenges And Its New Applications In Coating Industry, Sadegh Poozesh

Theses and Dissertations--Mechanical and Aerospace Engineering

This study is devoted to some of the most important issues for advancing inkjet printing for possible application in the coating industry with a focus on piezoelectric droplet on demand (DOD) inkjet technology. Current problems, as embodied in liquid filament breakup along with satellite droplet formation and reduction in droplet sizes, are discussed and then potential solutions identified. For satellite droplets, it is shown that liquid filament break-up behavior can be predicted by using a combination of two pi-numbers, including the Weber number, We and the Ohnesorge number, Oh, or the Reynolds number, Re, and the Weber number, …