Aerodynamics and Fluid Mechanics Commons^™

Suppression Of Post-Buckling Deflection And Panel-Flutter Using Shape Memory Alloy, Mohammad Tawfik Abo El So-Oud

Mechanical & Aerospace Engineering Theses & Dissertations

A novel concept proposed is the use of Shape Memory Alloy (SMA) to reduce the panel thermal deflection and flutter responses. SMA has unique ability to recover large prestrains completely when the alloy is heated (by aerodynamic heating in the present case) above the austenite start temperature A_s. During the recovery process, a large tensile recovery stress occurs if the SMA is restrained.

In this thesis, a panel subject to the combined aerodynamic and thermal loading is investigated. A nonlinear finite element model based on von Karman strain displacement relation is utilized to study the effectiveness of SMA …

Development And Application Of Adaptive Dynamic Grids For Wake Vortex/Ground Interaction, Ilker Emin Türkgeldi

Mechanical & Aerospace Engineering Theses & Dissertations

An adaptive and dynamic grid approach is developed for the numerical computations of wake vortex flow problems with ground interaction. The unnecessary grid points at the far field of the original, large, single zone grid are removed for computational efficiency. Next, the grid is modified into an adaptive one, where the fine core region keeps track of the vortices and can be split into two regions when the vortex separation distance exceeds a specified limit length. In the final step a multi zonal feature is added to this grid by means of two embedded grids placed at the vortex centers …

Large Amplitude Pitching Of Supermaneuver Delta Wings Including Flow Control, Yahia A. Abdelhamid

Mechanical & Aerospace Engineering Theses & Dissertations

The unsteady, three-dimensional Navier-Stokes equations are solved to simulate and study the aerodynamic response of a delta wing undergoing large amplitude pitching motion up to 90° angle of attack. The primary model under consideration consists of a 76° swept, sharp-edged delta wing of zero thickness, initially at zero angle of attack. The freestream Mach number and Reynolds number are 0.3 and 0.45 × 106, respectively. The governing equations are solved time-accurately using the implicit, upwind, Roe flux-difference splitting, finite-volume scheme. Both laminar and turbulent flow solutions are investigated. In the laminar flow solutions, validation of the computational results is carried …

Flow Separation Prevention On A Turbine Blade In Cascade At Low Reynolds Number, James P. Lake

Theses and Dissertations

The problem of flow separation from a low pressure turbine blade was investigated. The operating conditions under which the separation occurred were documented through measurement of surface pressure coefficients, boundary layer velocity and turbulence profiles, total pressure loss coefficient and wake velocity momentum deficit. Three different means for reducing the losses associated with the flow separation were also investigated. A boundary layer trip, dimples, and V-grooves were studied as passive means requiring no additional energy to reduce the separation losses. The boundary layer trip was only successful for an inlet and axial chord Reynolds number of 50k with a reduction …

Wind Tunnel Investigation Of Joined Wing Configurations, Jennifer Corneille

Theses and Dissertations

The Air Force Research Laboratory's Munitions Directorate is looking to extend the range of its small smart bomb. One proposed idea is to retrofit the bombs with a wing kit, particularly a joined wing configuration. A typical joined wing configuration is one where the wings are positioned in such a way that they form a diamond in both plan and front views. The purpose of this study is to conduct low speed wind tunnel testing of the joined wing configuration to help determine if the joined wing is more beneficial than a single wing configuration. Configurations with differing sweep angles …

Reduction Of Helmet Buffeting In Open Cockpit, Single Seat Race Cars, Mark Vallon

Master's Theses - Daytona Beach

At speeds approaching 240 mph, drivers of open cockpit race cars frequently experience large aerodynamic forces which act on the helmet. These forces, specifically the aerodynamic buffeting of the helmet, reach levels which are very fatiguing and distracting to the driver, and are therefore unacceptable. Little investigation has been done in this area, because normal wind tunnel tests do not isolate the helmet from the rest of the car. During this project, measurements of aerodynamic forces acting on a helmet inside a race car cockpit were made to determine the cause of the buffeting, and to determine possible improvements.

Tests …

Vortex Generated Rotor Wake Model For Real-Time Simulation, Kenneth S. Graham

Link Foundation Modeling, Simulation and Training Fellowship Reports

The University of Alabama Flight Dynamics Laboratory (UA FDL) has been simulating helicopters since 1981. The real-time, man-in-the-loop, simulator was developed locally and is continuously being upgraded. The hardware, software, architecture and math models are all developed in-house by a team of faculty and graduate students. Since 1994, the UA rotor model has been Bladehelo [2] - a true blade model that numerically integrates the flapping motion of individual blades and the shaft rotation. The approach is physically based. Discrepancies are studied until they are understood. Bladehelo played a key role in the discovery of residual bending [3], [4]. Bladehe!o …

Efficient Dynamic Unstructured Methods And Applications For Transonic Flows And Hypersonic Stage Separation, Xiaobing Luo

Mechanical & Aerospace Engineering Theses & Dissertations

Relative-moving boundary problems have a wide variety of applications. They appear in staging during a launch process, store separation from a military aircraft, rotor-stator interaction in turbomachinery, and dynamic aeroelasticity.

The dynamic unstructured technology (DUT) is potentially a strong approach to simulate unsteady flows around relative-moving bodies, by solving time-dependent governing equations. The dual-time stepping scheme is implemented to improve its efficiency while not compromising the accuracy of solutions. The validation of the implicit scheme is performed on a pitching NACA0012 airfoil and a rectangular wing with low reduced frequencies in transonic flows. All the matured accelerating techniques, including the …